Hampton Bay Y35041-163 Instructions / Assembly
Contents
1. HITE SUPPLY WIRE 9 to the WHITE FIXTURE LEAD WIRE 10 Connect the FIXTURE GROUND WIRE 7 to the SUPPLY GROUND WIRE 8 using a WIRE CONNECTOR 6 ASSEMBLY AND INSTALLATION Continued 5 Place the CANOPY 13 back onto the NIPPLE 4 and secure into place using the DECORATIVE NUT 14 provided Side the CANDLE COVER 15 onto the socket 6 Screw light bulbs into the threaded sockets and make sure they do not exceed the maximum wattage specified on the fixture s wattage rating label INSTALLATION IS NOW COMPLETED OUTLET BOX MOUNTING BRACKET MOUNTING SCREW NIPPLE HEX NUT WIRE CONNECTOR FIXTURE GROUND WIRE SUPPLY GROUND WIRE 9 WHITE SUPPLY WIRE WHITE FIXTURE LEAD WIRE BLACK SUPPLY WIRE BLACK FIXTURE LEAD WIRE CANOPY DECORATIVE NUT CANDLE COVER 1 2 3 4 5 6 7 8 PDF created with FinePrint pdfFactory Pro trial version http www pdffactory com2. fe oN Ne Fave Lianne a WALL MOUNT FIXTURE ASSEMBLY amp INSTALLATION INSTRUCTIONS b Please read carefully and save these instructions as you may need them at a later date CAUTION Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock GENERAL All electrical connections must be in accordance with local and National Electrical Code N E C standards If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions ASSEMBLY AND INSTALLATION 1 Thread the HEX NUT 5 onto the NIPPLE 4 and screw the NIPPLE 4 onto the MOUNTING BRACKET 2 without tightening the HEX NUT 5 2 Pull the power supply wires out from the OUTLET BOX 1 and mount the MOUNTING BRACKET 2 to the OUTLET BOX 1 using MOUNTING SCREWS 3 3 Place the CANOPY 13 of the fixture over the OUTLET BOX 1 and onto the NIPPLE 4 and adjust the NIPPLE 4 until it protrudes 1 4 out from the CANOPY 13 Remove the CANOPY 13 and secure the position of the NIPPLE 4 by tightening the HEX NUT 5 against the MOUNTING BRACKET 2 4 Attach the BLACK SUPPLY WIRE 11 to the BLACK FIXTURE LEAD WIRE 12 by using the WIRE CONNECTOR 6 In the same manner attach the W
Download Pdf Manuals
Related Search