World Imports WI583007 Installation Guide
Contents
1. FLUSH MOUNT FIXTURE INSTALLATION INSTRUCTIONS Please read carefully and save these instructions as you may need them at a later date CAUTION Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock GENERAL All electrical connections must be in accordance with local and National Electrical Code N E C standards If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions ASSEMBLY AND INSTALLATION 1 Screw the 8 32 IPS FIXTURE SCREWS 4 onto the MOUNTING BRACKET 2 and thread the 8 32 HEX NUTS 13 onto the 8 32 FIXTURE SCREWS 4 Do not tighten the 8 32 IPS HEX NUTS 13 at this time 2 Pull the SUPPLY WIRES 5 amp 6 and the SUPPLY GROUND WIRE 7 out from the OUTLET BOX 1 and attach the MOUNTING BRACKET 2 to the OUTLET BOX 1 using the slotted holes on the MOUNTING BRACKET 2 and the 8 32 IPS MOUNTING SCREWS 3 provided 3 Place the COVER PLATE 11 over the OUTLET BOX 1 and onto the 8 32 IPS FIXTURE SCREWS 4 and adjust the 8 32 IPS FIXTURE SCREWS 4 until they protrude out from the COVER PLATE 11 1 4 Remove the COVER PLATE 11 and secure the position of the 8 32 IPS FIXTURE SCREWS 4 by tightening the 8 32 IPS HEX2. NUTS 13 against the MOUNTING BRACKET 2 4 Attach the BLACK SUPPLY WIRE 6 to the BLACK FIXTURE WIRE 9 by using the WIRE CONNECTOR 16 In the same manner attach the WHITE SUPPLY WIRE 5 to the WHITE FIXTURE WIRE 8 Connect the FIXTURE GROUND WIRE 10 to the SUPPLY GROUND WIRE 7 using a WIRE CONNECTOR 16 not included ASSEMBLY AND INSTALLATION Continued 5 Carefully tuck all wiring back into the OUTLET BOX 1 Place the COVER PLATE 11 back onto the 8 32 IPS FIXTURE SCREWS 4 and secure the COVER PLATE 11 into place using the DECORATIVE NUTS 12 provided 6 Install the bulbs See markings and or labels on the fixture for maximum wattage DO NOT OVER LAMP 7 Place the GLASS SHADE 14 over the COVER PLATE 11 onto the THREADED PIPE 17 Secure the GLASS SHADE 14 and CAP 18 in place by threading the FINIAL 15 onto the THREADED PIPE 17 INSTALLATION IS NOW COMPLETED OUTLET BOX MOUNTING BRACKET 8 32 IPS MOUNTING SCRE 8 32 IPS FIXTURE SCREW WHITE SUPPLY WIRE BLACK SUPPLY WIRE SUPPLY GROUND WIRE WHITE FIXTURE WIRE BLACK FIXTURE WIRE FIXTURE GROUND WIRE COVER PLATE COE Oy A Oe DECORATIVE NUT 8 32 IPS HEX NUT GLASS SHADE FINIAL WIRE CONNECTOR THREADED PIPE CAP
Download Pdf Manuals
Related Search