Minka Lavery 1292-580 Installation Guide
Contents
1. l INSTALLATION INSTRUCTIONS FOR 1292 For Wall Mount Fixture Minka Lighting Inc This product is protected by United States Federal and or WARNING Disconnect power at main electrical panel before installation Thread the nipple part way into the center hole of the crossbar and secure with hex nut Attach the crossbar to the junction box using two junction box screws The side of the crossbar marked GND must face out Follow wiring instructions carefully see fig 2 Place the fixture body D over the nipple then tighten it with the ball nut E Place the glass shade C and the check ring B onto the socket of the fixture body D then securely tighten the check ring B using the sleeve A The sleeve A is a tool when the installation is complete it must be taken away Install the light bulbs in accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING Junction Box Supply wire Grounding screw State Law including Patent and or Copyright laws SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER MOUNTING THE FIXTURE Installation see fig 1 Wiring see fig 2 l 2 Connect the electrical wires as follows Connect the Black wire from the fixture to the black house hot Wire Connect the white wire from the fixture to the white neutral house wire Make sure all wire nuts are secured You may wrap the connections with electrical tape If your2. outlet box has a ground wire green or bare copper connects fixture s ground wire to it Otherwise attach the bare copper fixture wire to the green ground screw on the crossbar Tuck the wire connections neatly into the wall junction box american lighting _ C 5 US lt sTE Intertek a a ae assaciation
Download Pdf Manuals
Related Search