Minka Lavery 8840-94 Installation Guide
Contents
1. J to install the light bulbs in accordance with the fixture specification DO NOT EXCEED THE MAXIMUM WATTAGE RATING 10 Replace the top cover J secure with the screws 1 Your installation is now complete Return power to the outlet box and test the fixture CAUTION RISK OF FIRE CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR Fig 1 Fig 2 FIXTURE lt L D WI RES FIXTURE WI RES WHI TE lt gt FIXTURE WI RES ai GREEN OR BARE COPPER GROUND HOUSE MRES WHITE NEUTRAL BARE COPPER GROUND gt american Ife hting association2. W ARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER 1 2 3 INSTALLATION INSTRUCTIONS Model 8840 READ AND SAVE THESE INSTRUCTIONS Shut off power at the circuit breaker and remove old fixture including mounting hardware Carefully unpack your new fixture and lay out all the parts in a clear area Take care not to misplace any small parts necessary for installation Pull black and white wires out of electrical outlet box A 4 Thread the two studs B into the pre drilled holes in the circular strap C spaced the same distance apart as the holes in the back plate H then tighten with the nut E 5 Attach Circular Strap C using Outlet Box Screws 6 F to the outlet box A Fig 1 Connect the electrical wires as shown in Fig 2 Making sure that all wire connectors are secured If your outlet box has a ground wire green or bare copper connect the fixture s Ground wire to it Otherwise connect the fixture s Ground wire directly to the circular strap using the Green Screw D provided To prevent moisture from entering the outlet box A and causing a short use clear silicone Sealant to outline the outside of fixture back plate H where it meets the wall leaving a space at bottom to allow moisture a means to escape 8 Place the back plate H into stud B and secure it 9 tightly against the wall using cap nut G Fig 1 At this point unscrew the screws I remove the top cover
Download Pdf Manuals
Related Search