Minka Lavery 4462-84 Instructions / Assembly
Contents
1. 1 INSTALLATION INSTRUCTIONS For Model 4462 273 READ AND SAVE THESE INSTRUCTIONS ARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER MOUNTING THE SQUARE STRAP Fig 1 Shut off the power at the circuit breaker and remove old fixture including the crossbar Carefully unpack your new fixture and lay out all the parts on a Clear area Take care not to lose any small parts necessary for installation Attach Square Strap A to the outlet box using two outlet box Screws B The side of the Square Strap marked GND must face out CONNECTING THE WIRES Fig 2 4 At this point connect the electrical wires as follow Connect the black wire from the fixture to the black house hot wire Connect the white wire from the fixture to the white neutral house wire Make sure all wire nuts are secured You may wrap the connections with electrical tape If your outlet box has a ground wire green or bare copper connects fixture s ground wire to it Otherwise connect fixture s ground wire directly to the crossbar using the green screw provided FINISHING THE INSTALLATION Fig 1 5 After the wires are connected tuck them carefully inside the outlet box as you holding the backplate E onto the Square Strap A Adjust the hole of the Square Strap A and the backplate E to align the holes then secure them by threading the two Allen Screws D with wrench C until snug Install the bulb in accordance with the fixture2. s specification DO NOT EXCEED THE MAXIMUM WATTAGE RATING Put the glass F over the socket and twist to secure it to the fixture Your installation is now complete Return power to the junction box and test the fixture SOCKET A OUTLET BOX WALL Fig 2 i FIXTURE i FIXTURE i FIXTURE WIRES Me i WIRES a i WIRES c Black or White or EJ Bare Smooth A Ribbed A Copper 7 x Ground HOUSE HOUSE WIRES i WIRES White Green or Neutral Bare Copper Ground american lighting association
Download Pdf Manuals
Related Search