Minka Lavery 6813-66 Instructions / Assembly
Contents
1. INSTALLATION INSTRUCTION FOR 6813 66 681 3 34 For Wall Mount Light Fixtures T BREAKER PREPARATION Fig 1 Shut off power at the fuse box or circuit breaker box If necessary Remove old fixture and all mounting hardware from wall junction box 2 Carefully unpack your new fixture and lay out ail the parts on a clear area Take care not to loose any small parts necessary for installation MOUNTING THE FIXTURE Fig 1 3 Position the circular strap B through the fixing holes onto the wall and make marks drill pilot holes for wood screws C into the wall then insert ihe plastic anchor A into the holes 4 Secure circular strap B to outlet box not provided with outlet screws D then secure the outlet box with wood screws C into plastic anchors A in the wall NOTE The holes of the circular strap with anchors must be upward CONNECTING THE WIRES Fig 2 4 Connect the fixture wires to the junction box wires as shown in Fig 2 Make sure all wire connectors are secure and do not easily pull off with a slight Fig 2 f tug If there is no Green Ground Wire from the i junction box connect the Fixture Ground Wire to FIXTURE i eatin the Circular Strap with the Green Screw provided Back ve eniT 5 Tuck these wire connections neatly into the wall renee junction box Ground COMPLETING THE INSTALLATION 6 Raise the mounting base E allowing for the mounting scre2. ws F to protrude through the holes on the mounting base E and then secure with the screws F by wrench 7 Place the glass G over the socket H and secure with the retaining ring 1 8 Install the proper light bulbs for your fixtures DO NOT EXCEED THE SPECIFIED WATTAGE f House WIRES 1 f Gieenor bore Copper Ground Neutral Return the power to the junction box and test the fixture Your installation is now complete
Download Pdf Manuals
Related Search