Minka Lavery 1355-177 Installation Guide
Contents
1. INSTALLATION INSTRUCTION FOR FIXTURE 1355 177 WARNING SHUT OFF THE POWER AT FUSE OR CIRCUIT BREAKER ASSEMBLY THE FIXTURE FIG 2 1 Carefully unpack your new fixture and lay out all the parts on a x FIXTURE LOOP K clear area Take care not to lose any small parts necessary for ir oo installation e UPPER COLUMN 2 Thread the nipple H into the coupling B tightly 3 Put the column A upper column I over the nipple H in order and secure with knob nut J GLASS SHADE G 4 Thread the fixture loop K onto the nipple H well Wa gd LUMN A 5 Adjust the arms to its desired position per fig 4 shown SOCKET l koi 6 Thread the glass shade G into the socket cup E well SOCKET CUP oe iis 7 Install the light bulbs in accordance with the fixture s ard 5 VELING specifications DO NOT EXCEED THE MAXIMUM WATTAGE JN ae aoe RATING l LEO 8 Thread the finial D over the nipple C till snug g AL D MOUNTING THE FIXTURE FIG 1 1 Shut off the power supply at the fuse box or circuit breaker box Remove the old fixture from ceiling Including the cross bar 2 Thread the nipple l into the collar loop J until snug 3 Thread the other end of nipple l into the cross bar F until snug 4 Place lock washer E over the end of nipple l protruding through cross bar F and thread hex nut D onto nipple until tight 5 Take this crossbar assembly and mount to ceiling outlet box A using outlet box screw H tightl2. d onto collar loop J k WIRES eee protruding through canopy WHITE GREEN OR BAR NEUTRAL COPPER GROUND Your installation is now complete Return power to the junction box and test the fixture a r U D american SO lighting Listed association
3. y The side of cross bar marked with GND must face out 6 Use a pair of pliers to open one end link of the chain and connect to the fixture loop K Close the link 7 By measuring determine correct number of links needed for proper hanging height Using pliers disconnect and discard remaining chain 8 Lace the fixture wires through the chain 9 Slip collar ring L over the chain then do the same with canopy M 10 Open the other end link of the chain and connect to the collar loop F Close the link 11 Feed the fixture wires through the collar loop J and nipple 1 and pull until taut CONNECTING THE WIRE See fig 3 1 Take the black wire from the ceiling outlet box and the smooth wire leg from the fixture and twist bare ends together Twist wire connector onto end of wire until snug 2 Repeat same process with white junction box wire and ribbed wire leg of fixture wire NOTE Twist wire together in the same direction then twist the wire connector onto wire 3 If your outlet box has a grounding wire Green or bare copper Attach this wire and the bare copper wire from the Fig 3 fixture together as step 1 If outlet box has no ground wire FIXTURE FIXTURE gt Attach the bare copper fixture wire to the green ground screw WIRES F WIRES BLACK OR GREEN OR on the cross bar smoor OA RIBBED BARE 4 Tuck these wires connectors neatly into the ceiling out let box GROUND and raise the collar ring L and threa
Download Pdf Manuals
Related Search