Minka Lavery 6622-613 Installation Guide
Contents
1. INSTALLATION INSTRUCTION FOR FIXTURE 6622 613 6623 613 6624 613 READ AND SAVE THESE INSTRUCTIONS WARNING SHUT OFF THE POWER AT FUSE OR CIRCUIT BREAKER MOUNTING THE FIXTURE Shut off the power supply at the fuse box or circuit breaker box Remove the old fixture from wall 1 Including the old cross bar Carefully unpack your new fixture and lay out all the parts in a clear area Take care not to lose any small parts necessary for installation Attach the mounting plate A to the outlet box using the outlet box screws B The side of the mounting plate marked GND must face out Follow the wiring instructions carefully See Fig 2 Attach the fixture back plate D over the mounting plate A well and secure with mounting screws E at 2 top and bottom Put the glass shade I spacer ring F over the socket J and secure with socket ring G using the socket ring tool C Install the bulb in accordance with fixture s specifications DO NOT EXCEED THE MAXMUM WATTAGE RATING Wiring See fig 2 Connect the electrical wires as follows Connect the black wire from the fixture to the black HOT house wire Connect the white wire from the fixture to the white Neutral house wire Make sure all the wire nuts were secured You may wrap the connections with electrical tape If your outlet box has a ground wire Green or Bare Copper connect fixture s ground wire to it Other wise attach the bare copper fixture wire2. to the green ground screw on the mounting plate Tuck the wire connections neatly into the wall junction box GROUND HOUSE WIRES GREEN OR BARE COPPER GROUND Your installation is now complete Return power to the juction box and test the fixture BOX SCREW B Fig 1 m SOCKET RING G MOUNTING PLATE A SPACER RING F GLASS SHADE SOCKET RING J american lighting association lb Intertek
Download Pdf Manuals
Related Search