Minka Lavery 1541-77 Instructions / Assembly
Contents
1. making sure that all wire connectors are secured If your outlet box has a ground wire green or bare copper connect the fixture s ground wire to it Otherwise connect the fixture s ground wire directly to the mounting plate using K the green screw provided FINISHING THE INSTALLATION Fig 1 S 7 Place canopy D over the mounting plate A and Spanner WRH 11 51 secure with screws B M j 8 Place the glass shade H and metal ring K over Socket Ring SKT RING 26 the socket and secure with socket ring I by using spanner J provided 9 Install light bulb not included in accordance with the fixture s specifications DO NOT EXCEED Fig 2 3 3 THE MAXIMUM WATTAGE RATING NE PAS pguse pocure C_D pocure C_D DEPASSER LA PUISSANCE NOMINALE sro Ribbed Copper MAXIMALE bu Your installation is now complete Return power to the outlet box and test the fixture HOUSE WIRES White Green Note Illustration Fig 1 on this manual is for L 5 _ C c installation purposes only It may or may not be identical to the fixture purchased iF Cc U LA 1817E2. INSTALLATION INSTRUCTIONS ltem 1541 New 08 29 2013 READ AND SAVE THESE INSTRUCTIONS WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER AVERTISSEMENT COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR HANGING THE FIXTURE Fig 1 Fig 1 f Outlet Box 1 Shut off the power at the fuse box or circuit NAA breaker If necessary remove the old fixture including the mounting hardware 2 Carefully remove the fixture from the carton and check that all parts are included as shown in the illustration 3 Attach the mounting plate A to the outlet box using mounting screws C Size 8 32N L0 5 The side of the mounting Plate marked GND must face out 4 Determine the desired hanging height and thread Rod W35 1 3 F Chain Loop rods F to metal frame G Carefully pass the W39 H 1 F HCH2012 wires through each rod as you assemble Then attach loop E by screwing onto rods F Note remove the nipple if installing with one 6 rod only 5 By measuring determine correct number of links needed for proper hanging height Using pliers disconnect and discard remaining chain then attach the chain to the loop E and the loop on canopy D Then carefully lace the fixture wires through the chain loop E and the loop of canopy D Set A 021 126102 Mounting Plate Ground Screw Mounting Screw 2 CONNECTING THE WIRES Fig 2 6 At this point connect the electrical wire as shown in figure 2
Download Pdf Manuals
Related Search