Minka Lavery 5551-477 Installation Guide
Contents
1. Fig 1 Supply Mounting Box Fixture Ground Wire plate Screw wire A C Outlet Box B Supply wire Fixture Mounting Ground Wire screw Fig 2 MIN 90 C SUPPLY CONDUCTORS FIXTURE 3 FIXTURE 3 FIXTURE x WIRES WIRES WIRES Black or White or io Bare Sett cose ee ous o HOUSE U F WIRES WIRES WIRES R lighting Black White Green or Tat Hot Neutral Bare Copper Ground Listed association2. INSTALLATION INSTRUCTIONS FOR 5551 477 For Wall Mount Fixture WARNING MOUNTING THE FIXTURE SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER Installation see fig 1 1 Disconnect power at main electrical panel before installation 2 Attach the mounting plate to the junction box using two junction box screw The side of the mounting plate marked GND must face out 3 Guide fixture wires through hole in center of mounting plate 4 Follow wiring instructions carefully see fig 2 5 Mount fixture by aligning mounting holes in fixture back plate with mounting screws and threading ball nuts C onto mounting screws 6 Hold the glass shade A through the lamp body B and then secure the glass shade in Place by turning the glass shade in arrow direction 7 Install the light bulbs in accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING Wiring see fig 2 1 Connect the electrical wires as follows Connect the Black wire from the fixture to the black house hot Wire Connect the white wire from the fixture to the white neutral house wire Make sure all wire nuts are secured You may wrap the connections with electrical tape If your outlet box has a ground wire green or bare copper connect fixture s ground wire to it Otherwise attach the bare copper fixture wire to the green ground screw on the mounting plate 2 Tuck the wire connections neatly into the wall junction box
Download Pdf Manuals
Related Search