Hampton Bay CBW1703/3BRZ Installation Guide
Contents
1. ASSEMBLY INSTRUCTION SKU 252 768 Note Please consult a qualified electrician if you are not certain of the installation CAUTION Before starting the installation disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box Caulk to mounting surface at top and sides 1 Fasten cross bar onto outlet box using 2 outlet box screws 2 Screw the nipple into the bushing and fasten it by tightening the hex nut 3 Using two pliers twists open the links at the both ends of the chain Hook one to the top loop and the other to bottom loop and then close the links 4 Weave the fixture wires and ground wire up through the bottom loop though the chain links through the top loop and through the canopy 5 Connect the wires white to white and black to black Cover the connections using the wire connectors provided Tie the ground wires from outlet box and from fixture to the ground screw on the cross bar 6 Place the canopy over the mounting screws on the cross bar all the way to the ceiling and fasten it with the lock nuts provided until the canopy is held firmly against the ceiling 7 Install the bulbs included 8 Place decorative pan glass shade and decorative cover the nipple onto the fixture and fasten them with finial Outlet Box Wire Connector lt ady Cross Bar air E Outlet Box Screw anopy lt lt gt Lock Nut Mounting Screw 5 Chain amp Top Lo2. op gt Bottom Loop Tube Bulb Bushing Hex Nut Nipple Decorative Pan Glass Shade Decorative Cover lt Finial
Download Pdf Manuals
Related Search