Kenroy Home 93317ORB Instructions / Assembly
Contents
1. MODEL 955170 PACKING 4 5 12 5 ASSEMBLY ASSEMBLY RING amp 5 FOR 55 SHADE STYROFOAM 12 KGS 9 5 51 7 ASSEMBLY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS FIXTURE SHOULD TAKE APPROXIMATELY 10 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED TOOLS YOU WILL NEED THE FOLLOWING TOOLS OR EQUIPMENT LADDER SCREWDRIVER ADJUSTABLE WRENCH WIRE CUTTERS AND PLIERS UNPACK THE FIXTURE YOU SHOULD HAVE RECENED THE FOLLOWING WITH SWIVEL 3 12 1 6 EXTENSION TUBES SOCKET ASSEMBLY METAL SHADE GLASS SHADE AND SOCKET RING PROTECT THE FINISH PLACE ALL PARTS A SOFT SURFACE MOUNTING HARDWARE PACKAGE 4 8 32 x 1 1 4 SCREWS 2 NUTS MOUNTING PLATE GREEN GROUND SCREW 3 WIRE CONNECTORS AND 2 FINIALS XTENSION TUBES FIXTURE ASSEMBLY 1 FEED WIRE UP THROUGH TUBING AND WORKING UPWARDS TOWARD CANOPY AS SHOWN 2 SCREW EXTENSION TUBE TO TOP OF THE SOCKET ASSEMBLY USE ANY SINGLE LENGTH OF EXTENSION TUBE OR SECTIONS OBTAIN DESIRED LENGTH REMOVE NIPPLE FROM EXTENSION TUBE IF NEEDED 3 SCREW EXTENSION TUBE TO SWIVEL ON CANOPY SOCKET STOP COMPLETE INSTALLATION I2. NSTRUCTIONS ON ASSEMBLY NEXT PAGE BEFORE PROCEEDING FINAL ASSEMBLY 1 PLACE THE METAL SHADE GLASS SHADE OVER THE SOCKET AND SECURE WITH THE SOCKET RING 2 INSTALL 100 MAXIMUM MEDIUM BASE TYPE NOT INCLUDED INTO THE SOCKET 3 RESTORE POWER YOUR FIXTURE IS NOW READY FOR USE AVAILABLE PART LASS SHADE 93317GS GLASS SHADE 93317GS REPLACEMENT PART w OOCKET RING 03 2014 93317ORB ASSEMBLY INSTRUCTIONS SUPPLY GROUND WIRE OUTLET BOX WHITE SUPPLY WIRE WIRE CONNECTORS 5 PCS BLACK SUPPLY WIRE CEILING j WHITE OR RIBBED BLACK OR SMOOTH i FIXTURE WIRE FIXTURE WIRE FIXTURE GROUND WIRE MOUNTING PLATE 8 32 SCREWS SUPPLIED WITH BOX 2 8 32 1 1 4 SCREW GREEN GROUND 5 ANOPY NAL 2 PCS 1 SWIVEL EXTENSION TUBE INSTALLATION INSTRUCTION READ AND SAVE THESE INSTRUCTIONS CAUTION TO AVOID POSSIBLE ELECTRIC SHOCK MAKE SURE THE ELECTRICITY IS SHUT OFF AT THE MAIN PANEL IF YOU ARE REPLACING AN EXISTING FIXTURE FIRSTLY TURN THE FIXTURE OFF NEXT TURN THE WALL SWITCH OFF FINALLY GO TO THE MAIN FUSE OR BREAKER BOX IN YOUR HOME TURN THE FUSE OR BREAKER TO THE OFF POSITION SOME TYPES OF FUSES MUST BE UNSCREWED TO SHUT OFF THE POWER ALL WIRING MUST BE DONE IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRIC CODES F YOU ARE NOT FAMILIAR WITH WIRING YOU SHO
3. ULD USE A QUALIFIED ELECTRICIAN THIS FIXTURE IS INTENDED TO BE MOUNTED TO A UL LISTED OUTLET BOX CAPABLE OF SUPPORTING THE FIXTURE COMPLETE FIXTURE ASSEMBLY INSTRUCTIONS FIRST SEE PREVIOUS 1 SCREW 2 8 32 1 1 4 SCREWS INTO THE MOUNTING PLATE MAKING SURE THAT THEY LINE UP WITH THE HOLES IN THE CANOPY ATTACH THE MOUNTING PLATE TO THE CEILING OUTLET BOX USING THE TWO SCREWS PROVIDED WITH THE OUTLET BOX NOTE IF THE SCREWS WITH THE OUTLET BOX ARE TOO SHORT USE THE 2 8 32 x 1 1 4 SCREWS PROVIDED IN THE MOUNTING HARDWARE PACKAGE 2 CONNECT THE WHITE OR RIBBED FIXTURE WIRE TO THE WHITE SUPPLY WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTORS PROVIDED THE BLACK OR 5 FIXTURE WIRE TO THE BLACK SUPPLY WIRE IN THE SAME MANNER INSTALL THE FIXTURE GROUND WIRE UNDER THE GREEN GROUND SCREW ON THE MOUNTING PLATE THEN CONNECT THE FIXTURE GROUND WIRE TO THE SUPPLY GROUND WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTOR PROVIDED 5 THE WIRES CAREFULLY INSIDE THE OUTLET BOX SPREAD THE ELECTRICAL SPLICES SO THAT THE BLACK WIRES ARE ON ONE SIDE OF THE OUTLET BOX AND THE WHITE WIRES ARE ON THE OTHER SIDE 4 RAISE THE FIXTURE TO THE CEILING AND SECURE IN PLACE WITH 2 FINIALS 5 SEE PREVIOUS PAGE FOR FINAL ASSEMBLY INSTRUCTIONS 03 2014 93317ORB INSTALLATION
Download Pdf Manuals
Related Search