the great outdoors by Minka Lavery 72436-261 Instructions / Assembly
Contents
1. INSTALLATION INSTRUCTIONS ltem 72436 261 READ AND SAVE THESE INSTRUCTIONS WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER AVERTISSEMENT COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR ASSEMBLING THE FIXTURE Fig 1 1 Remove loop A ring B rubber washer C top cap D cup E and cover F 2 Remove nipple G and remove cover H 3 Insert back glass J and side glass l into the lamp body P and secure with clips L 4 Open door M insert front glass N and secure with clips O 5 Replace cover H over tube K and secure with nipple G 6 Replace cover F followed by cup E cap D rubber washer C and secure with ring B and loop A POST THE FIXTURE Fig 2 7 Shut off the power at the fuse box or circuit breaker box avertissement couper le courant au niveau des fusibles ou du disjoncteur and remove the old fixture including the mounting hardware 8 Carefully unpack your new fixture and lay out all the parts in a clear area Take care not to misplace any small parts necessary for installation 9 Pull the black white and ground wires out of post S CONNECTING THE WIRES Fig 3 10 While supporting the lantern connect electrical wires as shown in Fig 3 If your post has a ground wire green or bare copper connect the fixture ground wire to it If not consult your electrician for proper grounding After the wires are connected tuck them carefully insi2. de the post cup Q Align the lantern with post S and secure with screws R Fig 2 11 Install the light bulbs not included in accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE n Fig 3 Your installation is now complete Return power and test the fixture WIRES WIRES WIRES Smooth E Ribbed Bare x Copper Ground Note Illustration Fig 1 Fig 2 on this manual is for installation purposes only It may or may not be identical to the fixture purchased Green Ground american lighting pa association Intertek
Download Pdf Manuals
Related Search