Minka Lavery 1010-44-PL Installation Guide
Contents
1. connect the House Ground ty Wire 2 to the Fixture Ground Wire 9 using Wire ee Oe eae Connector 7 connect the White Supply Wire 3 to the SWHITE SUPLY WINE ioe White Fixture Wire 8 connect Black Supply Wire 4 to ABLACK SUPPLY WIBE 12 KEY HOLE SLOT the Black Fixture Wire 10 using Wire Connectors 7 5 DRILLED HOLES 13 SOCKET Carefully tuck all wires back into the Outlet Box 1 See 6 ANCHOR 14 ANCHOR SCREWS Fig 2 7 WIRE CONNECTORS 15 TUBE NOT INCLUDED 5 Feed the four Anchor Screws 14 through the narrow part las Sait eee of the Keyhole Slots 12 Tighten the Anchor Screws 14 into the Ceiling Anchors 6 until the Fixture Body 11 is Fig 2 flush with the ceiling Wines WRES WIRES 6 Install the Fluorescent Tube 15 into the Sockets 13 Shon fis Reseo fis Copper Please follow the wattage label located on the fixture ae body Do not exceed the recommend wattage 7 To install the Acrylic Lens 16 carefully slide the lens to the end cap which is fixed making sure the lens is way to the end of the end cap Pull the other end cap which is Neutral Grono moveable outward and put the Acrylic Lens down Then the Acrylic Lens 16 will be hold by the end cap Refer to process 2 B AW MPLETED american J gt INSTALLATION IS NOW CO CB Aa y R 1g Listed association PDF created with pdfFactory Pro trial version www pdffactory com2. INSTALLATION INSTRUCTIONS For Model 1010 44 PL WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER CAUTION Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock Fig 1 GENERAL Process 1 O All electrical connections must be in accordance with local and national electrical code N E C standards If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instruction ASSEMBLY AND INSTALLATION 1 Take the fixture out of the box Remove the Acrylic Lens 16 from the fixture and place aside on a flat surface to avoid damage to the lens To remove the lens pull one end cap outward and then remove the acrylic lens from the fixture Refer to process 1 Then take the cardboard out from the End Cap 2 Pull the Supply Wires 3 amp 4 and House Ground Wire 2 out from the Outlet Box 1 3 Position your fixture over the Outlet Box 1 Mark the location of the four Keyhole Slots 12 located on the Fixture Body 11 Be sure to mark only the narrow part of the Keyhole Slots 12 Remove the Fixture Body 11 from the ceiling Drill the four Holes 5 using the appropriately sized drill bit Insert the provided Ceiling Anchors 6 into the holes 4 Make the wiring connections
Download Pdf Manuals
Related Search