Minka Lavery 6757-206 Installation Guide
Contents
1. INSTALLATION INSTRUCTION 6757 206 For Flush Mount Ceiling WER MOUNTING THE FIXTURE Fig 1 Shut off the power at the circuit breaker box Remove old fixture and all hardware from Junction Box Junction Box Ceiling Carefully unpack your new fixture and lay out all the parts on a clear area Take care not to lose any small parts necessary for installation Thread the two Studs A about 1 4 into the pre drilled holes in the Mounting strap spaced the same distance apart as the holes in the fixture B Attach the Mounting strap to the Junction Box with the two Junction Box Screws as shown The side of the Mounting strap marked GND must face out While holding the column assembly towards the ceiling comnect the electrical wires as Shown in Fig 2 making sure that all wire nuts are secured You may have to wrap the connections with electrical tape If your outlet has a ground wire green or bare copper connect the fixture ground wire to it Otherwise connect fixture s ground wire directly to the Mounting strap with the green screw provided After wires are connected tuck them carefully inside the Junction Box Put lamp body B on to the junction box aligning screws on mounting strap with mounting holes in canopy and lock it securely with ball nut C 7 Install the light bulbs in accordance with the fixture s specifications NOTE DO NOT EXCEED THE SPE2. CIFIED WATTAGE Place the glass shade E into the metal trim F Hook the end of arm D to the hook on the lamp body B and the metal trim F then attach the finial G to the bottom of the metal trim F 10 Attach the crystal H to the finial G Cs FIXTURE FIXTURE WIRES WIRES White or Bare Your installation is now complete Return power to the hee Ribbe junction box and test the fixture Copper HOUSE Ground HOUSE WIRES WIRES White Green or Neutral Bare Copper Ground Listed
Download Pdf Manuals
Related Search