Titan Lighting TN-7549 Installation Guide
Contents
1. with copper conductor with silver conductor Note When parallel wire SPT 1 amp SPT II is used The neutral wire is square shaped or hae joz ridged and the other wire will be round in shape or smooth See Illus 7 Push fixture to ceiling carefully passing mounting screws through holes 8 Secure fixture to ceiling with knurl knot 9 Insert lamps and attach glass with trim if provided and finial2. SEMI FLUSH MOUNTING AND WIRING INSTRUCTIONS WARNING RISK OF FIRE MOST DWELLINGS BUILT BEFORE 1985 HAVE SUPPLY WIRE RATED 60 C CONSULT A QUALIFIED ELECTRICIAN BEFORE INSTALLING 1 Run wire from center stem through hole in center of canopy Secure in place with lockwasher and hexnut 2 Turn off power 3 Assemble mounting screws to outlet box Screws not provided 4 Attach mounting strap to outlet box Screws not provided 5 Grounding instructions See Illus A or B A On fixtures where mounting strap is provided with a hole and two raise dimples Wrap ground wire from outlet box around green ground screw and thread into hole B On fixtures where a cupped washer is provided Attach ground wire from outlet box under cupped washer and green ground screw and thread into mounting strap If fixture is provided with ground wire Connect fixture ground wire to outlet box ground wire with wire connector Not provided After following the above steps Never connect ground wire to black or white power supply wires A B WIRE CONNECTOR XTURE GROUND F N FIXTURE GROUND Pa OUTLET BOX CUPPED ea A GRounn WASHER finial GREEN GROUND SCREW DIMPLES GREEN GROUND SCREW 6 Make wire connections connectors not provided Reference Chart below for correct connections and wire accordingly Red Supply Wire to White Supply Wire to Clear Brown Gold or Black without tracer tracer Insulated wire other than green
Download Pdf Manuals
Related Search