Sea Gull Lighting 75435-962 Installation Guide
Contents
1. from illustration when ordering parts CANOPY E BEFORE YOU BEGIN Carefully remove the fixture from the carton and check that all parts are included as shown in Figure 1 Be careful not to misplace any of the screws or parts which are needed to install this fixture U lt CAP NUTS E INSTALLATION STEP 1 Secure mounting bar A to outlet box with outlet box screws not supplied DIFFUSER F STEP 2 FIGURE 1 NOT SUPPLIED A Use a listed wire connector to connect the fixture hot wire black wire or round and smooth tracer to the supply hot wire B Use a listed wire connector to connect the fixture common wire white wire or square and rigid to the supply common wire C Gently try to remove the wires from the connector If you can remove the wires carefully re do the wiring connection Make sure no bare wires can be seen outside wire connectors gt STEP 4 After wires are connected tuck them carefully inside outlet box STEP 3 Raise the canopy G to the ceiling so mounting screws B protrude GROUNDING INSTRUCTIONS The green grounding screw D is to je Hales seed oe Segure in place by threading Cab nats be inserted into the hole with two raised dimples provided on the E onto mounting screws B mounting bar A Wrap the ground wire from the fixture if supplied and the ground wire from the outlet box bare metal or green S 5 insulated wire around the green grounding screw D on t2. Na Installation And Safety Instructions HC 1491 il li hbj Line art shown may not exactly match the fixture enclosed However the installation instructions do apply to sta gu ig mg this fixture Fill in Item Number on Carton and File This Sheet For Future Reference ITEM 112108 IMPORTANT SAFETY INSTRUCTIONS SUPPLY e Be sure the electricity to the system you are working on is turned GROUND WIRE off either the fuse removed or the circuit breaker set at off e Use of other manufacturers components will void warranty listing OUTLET BOX and create a potential safety hazard SCREWS e If you are unclear as to how to proceed contact a qualified electrician Al e You don t need special tools to install this fixture ar D ar BAR A e Be sure to follow the steps in the order given e Read instructions carefully FIXTURE e Save these instructions MOUNTING GREEN GROUNDING SCREWS B IF SUPPLY WIRES ARE LOCATED WITHIN 3 OF BALLAST USE WIRE SCREW D WIRE RATED FOR AT LEAST 90 C CONNECTORS CLEANING aoa f f FIXTURE To clean wipe fixture with a soft cloth Clean glass with a mild soap GROUND WIRE Do not use abrasive materials such as scouring pads or powders an pat D 2 ie Q e o o o lt oO O o ne D 5 ORDERING PARTS Keep this sheet for future reference and in case you need to order replacement parts Parts for this fixture can be ordered from place of purchase Be sure to use exact wording
3. he Install lamps not supplied mounting bar A If uninsulated ground wire is on the mounting bar connect the ground wire from the fixture if supplied and the outlet box to it using a small wire connector not supplied NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER Raise diffuser F to canopy E and twist into place to secure SUPPLY WIRES
Download Pdf Manuals
Related Search