Angelo Decor AD40169 Use and Care Manual
Contents
1. TROUBLESHOOTING Always disconnect the pump from the power supply before handling If the pump optional water feature fail to operate e Check to make sure the power cord is plugged in and the receptacle has stable power supply running to it e Check to ensure water level is above sensor e Check the tubing for kinks or obstructions e Check if water feature outlet or tubing is clean and clear e Check the front cover of pump for obstructions If water flow has not returned e Remove front cover and impeller cover to access rotor area e Rotate the rotor to ensure it is not broken or jammed Remove the rotor to check it is free from any debris e Rinse the cover and re assemble LIMITED WARRANTY These components are warranted to the original user against defective materials and workmanship for a period of 12 months Our limited warranty does not cover any costs associated with the installation or removal of products subject to warranty claims or the cost of return The warranty will commence from the date of purchase Replacement liability is limited to any part or parts of the unit which have failed due to defective material or workmanship Proof of purchase is required for all claims against the limited warranty This warranty does not extend to damage of the product or part resulting from accident misuse alteration neglect abuse improper installation or normal wear and tear to the product s This limited warranty extends only t2. from pond Do not pump heated liquids or water that is above 40 C Always operate the pump completely submerged Disassemble the unit periodically to clean mineral deposits and build up of debris inside the impeller and rotor Clean components when visibly soiled or a drop in performance is noted Use a cloth or soft brush white vinegar or mild soap when cleaning Do not operate this pump below 4 C as FREEZING DAMAGE MAY OCCUR lf temperature is likely to fall below 4 C remove the pump from the pond ensure all water is removed from the pump and the unit is completely dry and stored in a frost free place
3. o the original user of the product For more information on this and other products please visit our web site www angelodecor com PLEASE DO NOT RETURN THIS UNIT TO THE STORE To contact us regarding this unit your options include Email customersupport angelodecor com Phone 780 453 6646 Fax 780 453 6620 Angelo D cor International Inc 15840 118 Avenue Edmonton AB T5V 1C4 SP SS V2 01 08 14 Safe Stop Fountain Pump ANGELO Instruction Manual SP650 SP850 Dacor THANK YOU FOR BUYING AN ANGELO DECOR PRODUCT PACKAGE CONTENTS Y2 Output 3 3 Output Fountain Pump 3M 10 Power Cord SP650 5M 15 Power Cord SP850 IMPORTANT BEFORE YOU BEGIN This pump is intended for use in free standing fountains and water features in clean water applications It is not compatible with salt water lt should be installed properly in to these features based on this instruction manual to ensure this feature works as intended The Safe Stop feature uses a sensor designed to detect improper water levels preventing your pump from running dry and overheating Sensor Water level must be at or above the level of the sensor for the pump to resume operation A few seconds delay may result after adding water QUESTIONS PLEASE DO NOT RETURN THE ITEM TO THE STORE Please visit our website www angelodecor com for more information and videos on how to assemble and properly use your pr
4. oduct WARNING SAFETY AND ELECTRICAL CONNECTIONS The pump is supplied with 3 core electrical cable permanently connected and sealed to the motor The cable cannot be replaced Pump should be discarded if cord is damaged e Connect pump to a ground fault circuit interrupter GFCI receptacle e Do not connect to any voltage other than that stated on the pump Alternate power supply will cause immediate damage Always unplug or disconnect from power supply before putting hands in the water while equipment is being handled in any way g Do not use the cable to lift the pump as this may cause damage e Keep cord away from high temperatures or any element that may cause physical damage PLACEMENT OF PUMP IN WATER FEATURE The pump must always be placed in a standing position Pump should never be allowed to sit on its side as this will disable the Safe Stop feature A slight forward tilt will help the intake at the front of the pump to remain fully submersed keeping air pockets out of the water line Placing a small stone under the back of the pump or securing the power cord ee to affect this tilt is highly recommended A N A loop in the connected tubing shown right will also help the Safe Stoo feature to operate at peak efficiency Bottom of water feature CARE AND MAINTENANCE Before attempting any adjustments always disconnect the pump from the power supply and remove
Download Pdf Manuals
Related Search