Home

Alpine USA256 Instructions / Assembly

image

Contents

1. Limited Warranty Information Thank you for choosing an Alpine product We aim to please with our wide range of products including Fountains Birdbaths Statuary Pond Supplies amp More All of our products are constructed from the highest quality materials In the event that we have not achieved our usual standard of excellence we will repair or replace at our discretion within the warranty period A valid proof of purchase with the purchase date clearly indicated must be provided Photos of defective merchandise will also be required to help distinguish the actual cause of the defect Please read below for a detailed description of warranty coverage eWater Damage Alpine products are not manufactured to withstand extreme temperatures Improper storage that allows water to freeze within a product may cause damage and is considered negligence and will therefore not be covered under this warranty The use of hard water and or caustic cleaners can affect the paint or other finishes Failure to keep the unit clean and use of such additives cleaners will also void the warranty Please note for fountains it is normal for some splashing to occur and protecting the immediate surfaces is not the responsibility of Alpine Corporation ePaint amp Color Retention and or Loss The use of water will cause natural erosion to the color This area can be touched up using standard paint The paint is designed to protect the entire finish against br
2. This includes any and or all defects arising out of freezing water damage hard water damage failure to keep the unit clean and free of harmful addi tives such as bleach chlorine etc which affects the paint and or parts This warranty also does not cover any additional charges or installation removal disposal and or shipping costs or conse quential damage associated with any warranty claim Alpin CORPORATION Alpine CORPORATION USA256 Boy with Wheel Fountain Assembling amp Using Your Product Unpack all components carefully Please check to ensure all parts have been removed from the packaging Decide on a suitable location to begin assembling Parts 1 Fountain Base 1 2 Bronze Boy Decoration 1 3 Water Wheel Decoration 1 4 Submersible Pump 1 ASSEMBLY INSTRUCTIONS 1 Place the fountain base on a smooth amp level surface 2 Align Bronze Boy decoration with opening on side of fountain base making sure the opening aligns with placement peg step 1 3 Before securing Connect the vinyl tubing to the water pump and then place inside the fountain Adjust the flow control to the lowest setting to avoid splashing until the fountain is completely assembled step 1 4 Feed the pump cord out of the basin of the fountain 5 Align water wheel with opening slot and press in to place step 2 6 Gently pour water into the fountain being careful not to overflow and cause splashing Make sure the wate
3. eakdown of color As with any product all finishes with time will gradually fade and discolor The warranty will only cover against severe or complete fading within the first year from date of purchase with the above exclusion eProcedure Service Should a warranty claim be needed you should contact the retailer from whom you pur chased the product If that is not an option you can contactAlpine Corporation at www alpine4u com When contacting Alpine Corporation you must be prepared to show proof of purchase provide photographs and any other information needed to validate your claim This maybe necessary to dis tinguish between a partial or complete replacement of a defective product The warranty does not cover any items with multiple parts the warranty will ONLY cover the individual component of the unit item that may be defective Replacement parts can be made available to a consumer through the original selling party or an approved parts retailer If this is not an option contact our customer service department eNot Covered Under Warranty The limited warranty will NOT cover cases of damages due to 1 Damages caused in Transit 2 Inadequate care and or neglect 3 Environmental and or natural elements 4 Immersion in water unless specified 5 Improper Installation Storage and or Maintenance This warranty is void if the product has been damaged by accident misuse negligence improper installation and or modifications have occurred
4. fully grip the impeller and gently pull the impeller rotor assembly out of the pump housing e Rinse the impeller rotor assembly and clean the cavity with clean water If break age or damage is found contact your local retailer for part eFountain Care eWe recommend to use Alpine s all natural cleansing formula toeliminate foam lime scale and calcium buildup fight mineral deposits leave water crystal clear help prevent staining remove organic contaminants and treat discolored water This formula will help prevent pump damage due to hard water build up i For small sized fountains holding water up to 7liters of water we recommend Alpine Item PPL100 ii For larger sized fountains holding water over 7liters of water we recommend Alpine Item PPL102 iii For more information please visit www alpine4u com Caution o Always unplug the pump from the electrical outlet before cleaning amp handling o Uses with clean water only do not place the fountain and or parts in any other liquid o Periodically change water amp clean the pump to keep free from micro organisms o Disconnect and store the unit in a dry place if not in use for an extended period of time o Do not operate with water above 90 F or 30 C o Do not lift carry or pull the pump by the power cord o Do not exceed the maximum voltage amp wattage on transformer o NEVER LET THE PUMP RUN DRY
5. r completely submerges the pump and the water flows smoothly during operation step 3 8 Plug the transformer into your local power supply Make sure that there is no water around the transformer and always keep the power source in a dry place step 4 NOTE We recommend that you use distilled water to prevent scale build up The first time you operate the pump it can take up to 5 minutes for the air to be completely expelled and water begins to flow properly WATER MUST BE FILLED TO SUBMERSE PUMP COMPLETELY BEFORE USING Trouble Shooting amp Caution If you have any questions and or problems please contact the retail store you pur chased this fountain elf your pump fails to run e Check the circuit breaker or try a different outlet to make sure the pump is receiving electrical power e Check the pump discharge and tubing for any kinks and or obstructions e Any buildup obstructing the water flow can be flushed with a garden hose e Check the rotor by removing the front cover amp plate to access the impellor area Turn the rotor and make sure that the rotor is not jammed or broken elf your pump spews e Check the water level to make sure the pump is completely submerged and there if enough water in the basin to operate your fountain Not having enough water will cause your pump to spew elf your pump is making abnormal loud noises Disconnect the pump from the electrical power supply and remove the front cover amp plate e Care

Download Pdf Manuals

image

Related Search

Related Contents

Bulletin municipal - Juin 2010  SureLock SLGDL7 Installation Guide  Après la 3e, rentrée 2015  AEROPLUS 6 D (deutsch) - Kröber Medizintechnik  AlphaVUE User`s Manual - Birmingham Data Systems  Version PDF    Hypertec HYNEP61001 Network Card User Manual  QUICK GUIDE  Mise en page 1 - Formulaire de contact, cliquer ici  

Copyright © All rights reserved.
Failed to retrieve file