Lifegard Aquatics R440801 Use and Care Manual
Contents
1. during installation and maintenance operations The product can be used in liquids with temperatures no greater than 95 F Keep these instructions in a safe place for future reference Keep out of reach of children SUBMERSIBLE PUMP WARNING To reduce the risk of electric shock use only on portable self contained fountains no larger than 5 feet in any dimension WARNING Risk of electric shock To reduce the risk of electric shock be certain that it is connected only to a properly grounded grounding type receptacle WATER LEVEL DRIP LOOP WARRANTY Lifegard Aquatics warrants to the original purchaser this product to be free from defects in material or workmanship for a period of one year from the date of purchase provided it is operated in accordance with factory instructions and operated within the environment and limitations for which it is designed Lifegard will not be liable for any labor cost of removing or replacing component parts This shall be the responsibility of the original purchaser as will be shipping charges to and from the Lifegard facility Damage incurred by improper repackaging or in shipping is not covered by this warranty Lifegard will only be responsible for repair or replacement of any of its products or parts that are found to be defective and will not bear cost of any incidental or consequential damages arising out2. of the occurrence of such defect This warranty gives you specific legal rights that vary from state to state LIFEGARD Phone 800 628 8771 Fax 800 424 1445 Email info lifegardaquatics com Web Site www lifegardaquatics com
3. LIFEGARD Quiet one Aquarium Fountain Pumps Model 200 and 400 INSTRUCTIONS Magnetically powered centrifugal pump featuring a watertight synchronous motor Requires a small but important maintenance procedure for correct functioning Every ANNAN 1 2 months remove bottom 6 sponge B and rotor A and then l wash all parts with water SAFETY STANDARDS i Make sure that the cables are fully intact before connecting the equipment to the main power supply The power cables can not be replaced or repaired Replace the entire unit if damaged WARNING make sure that the pump is disconnected unplugged before performing any maintenance in the water If the plug or main socket is wet disconnect the master switch before removing the power cable Itis vital that the product is plugged into a GFCI outlet switch Ground Fault Circuit Interrupter Do not use the equipment for purposes other than what it is intended for e Ideally extension cords should not be used If it is necessary to use one make sure that the connection is completely sealed and that the cable is suitable for external use and identical to that of the apparatus in terms of insulation and section Make a Drip Loop in the cable below the level of the plug to avoid that accidental drops of water coming into contact with the plug and socket see 1 Avoid lifting the equipment by means of the power cable
Download Pdf Manuals
Related Search