Vigo VG15323 Instructions / Assembly
Contents
1. hours contact the dealer or distributor who sold the unit or contact VIGO directly VIGO will provide the warranty service described above when the following conditions have been met the failure is of the nature or type covered by the warranty the user has informed an authorized VIGO Agent or VIGO s warranty service department representative of the nature of the problem during the warranty period conclusive evidence e g proof of purchase or installation is provided to the foregoing by the user proving that the failure occurred or was discovered within the warranty period an authorized independent service person or company representative has been permitted to inspect the product during regular business hours within a reasonable time after the problem was reported by the user VIGOs warranty obligation shall be discharged upon tender of replacement or repair The customer s refusal to accept the tender terminates VIGO s warranty obligations Certain models are pending approval Certification may be ended by VIGO or certification agencies without notice2. VALVES AN ALLOW BOTH HOT AND COLD WATER TO RUN WAT AT LEAST ONE MINUTE EACH WHILE ER IS RUNNING CHECK FOR LEAKS ESPECIALLY AT HOOK UPS TO SUPPLY LINES TIGHTENING NUTS SLIGHTLY WILL STOP ANY MINOR LEAKS VIGO http www vigoindustries com PRESSURE REGULATOR VIGO INDUSTRIES LLC VIGO FAUCET LIMITED LIFETIME WARRANTY EFFECTIVE JANUARY 1 2010 VIGO offers the following limited warranty on each of its Faucet products the Product and the components thereof This warranty extends only to the original owner or end user for personal household use For commercial uses additional limitations apply VIGO warrants the structural components of the Product to be free from defects in workmanship and materials under normal use and service for the period commencing from the initial date of purchase by the owner or end user contractor or builder from VIGO or an authorized VIGO dealer through the lifetime of the original owner or end user VIGO warrants the cartridge component of the Product to be free from defects in workmanship and materials under normal use and service for a period of five 5 years from the initial date of purchase by the owner or end user contractor or builder from VIGO or an authorized VIGO dealer VIGO warrants the spray assembly component of the Product to be free from defects in workmanship and materials under normal use and service for a period of one 1 year from the initial
3. VIGO vco http www vigoindustries com FUNCTION BUTTON p 1 EXPANDABLE UP TO 30 SIDE VIEW SPRAY HOSE ad SW IVE L 360 FRONT VIEW TOP VIEW VG02005 THE MEASUREMENTS IN INCHES ARE ROUNDED TO THE NEAREST 1 8 PACKAGE CONTENT PLASTIC HOLDER B PRESSURE REDUCER COUNTERWEIGHT RUBBER FAUCET ASSEMBLY FLEXIBLE HOSES MAINTENANCE Your new faucet is designed for years of trouble free performance Keep it looking new by cleaning it periodically with a soft cloth Avoid abrasive cleaners steel wool and harsh chemicals as these will scratch dull and or damage the finish and or product void your warranty TOOLS NEEDED Adjustable wrench Groove joint pliers Plumber s putty Pipe tape Phillips and flat screwdrivers SAFETY TIPS If you use soldering for the installation of the faucet the seats cartridges and washers will have to be removed before using flame Otherwise warranty will be void on these parts Protect your eyes with safety glasses when cutting or soldering water supply lines Cover your drain to avoid losing parts IMPORTANT POINTS Prior to beginning installation turn off the cold and hot water lines and open the hot and cold knobs on the old faucet to release build up pressure When installing your new faucet turn the connector nuts finger tight then use one wrench to anchor the fitting and a second wrench
4. date of purchase by the owner or end user contractor or builder from VIGO or an authorized VIGO dealer Subject to the Warranty Service provision below any product reported to the authorized dealer or to VIGO as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of VIGO This warranty extends to the original owner or end user and is not transferable to a subsequent owner Neither the distributor authorized VIGO dealer nor any other person has been authorized to make any affirmation representation or warranty other than those contained in this warranty Any affirmation representation or warranty other than those contained in this warranty shall not be enforceable against VIGO or any other person VIGO reserves the right to modify this warranty at any time it being understood that such modifications will not alter the warranty conditions applicable at the time of sale of the products in question Limitations This warranty shall not apply to instances of incorrect operating procedures breakages or damages caused by fault through improper installation carelessness abuse misuse misapplication improper maintenance or alteration of the Product as well as chemical or natural corrosion accident fire flood an act of God or any other casualty Avoid abrasive cleaners steel wools and harsh chemicals as these will scratch damage and or dull the product and or finis
5. h and void this warranty The owner end user of the Product covered by the present warranty is entirely responsible for its proper installation and any applicable plumbing or electrical wiring VIGO neither installs nor supervises the installation nor hires a contractor for this purpose consequently VIGO cannot be held responsible for any default breakage or damages caused thereby or resulting thereof either directly or indirectly The owner end user must provide access to the components of the Product as described in the installation guide so that VIGO can execute the warranty specified herein If such access is not available all expenses to provide said access will be the responsibility of the owner end user This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by VIGO and all applicable rules regulations and legislation pertaining to such installations This warranty does not apply unless the VIGO Product is installed by fully insured licensed professionals Vigo strongly recommends that such licensed professionals have experience in the installation of bathroom and kitchen products Installation of certain products including without limitation glass products i e shower doors and glass sinks by an inexperienced person may result in glass breakage and consequently cause personal injury or death VIGO is not liable for personal injuries or deaths to any persons or f
6. or any direct special incidental or consequential damage loss of time loss of profits inconvenience incidental expenses labor or material charges or any other costs resulting from the use of the product or equipment or pertaining to the application of the present warranty or resulting from the removal or replacement of any product or element or part covered by this warranty EXCEPT AS OTHERWISE PROVIDED ABOVE VIGO MAKES NO WARRANTIES EXPRESSED OR IMPLIED INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR COMPLIANCE WITH ANY CODE In any case VIGO cannot be held liable for any amount over and above the purchase price paid for the Product by the owner end user contractor or builder Commercial Limitations In addition to the above conditions and limitations the warranty period for products installed for commercial applications or used in commercial ventures is one 1 year from the initial date of purchase by the owner end user contractor or builder from an authorized dealer VIGO is not responsible for loss of use or profit under any circumstances If the product is used as a display the warranty period begins when the product is placed on display This warranty gives the owner end user specific legal rights The owner end user may also have other rights which can vary from one state or province to another Warranty Service In order to obtain service provided under this warranty during regular business
7. to tighten the nut one additional turn Connections that are too tight will reduce the integrity of the system Wrap all threaded connections with Teflon tape available at your local hardware or plumbing supply store Always wrap in a clockwise direction All installations can vary depending on how your previous faucet was installed Not all necessary supplies to install your faucet are included however they are available wherever plumbing supplies are sold For additional assistance visit http www vigoindustries com ASSEMBLY NOTE INSTALLATION MUST BE DONE BY A QUALIFIED LICENSE PLU MBER 1 SHUT OFF WATER SUPPLY REMOVE THE OLD FAUCET AND FLEXIBLE HOSES CLEAN SINK SURFACE IN PREPARATION FOR THE NEW FAUCET 2 P LACE BASE RING AND RUBBER RING TO THE BOTTOM SURFACE OF THE FAUCET SCREW MALE END OF FLEXIBLE HOSES TO THE FAU 3 P CET LACE THE NEW FAUCET IN POSITION ON THE SINK FROM UNDER THE SINK PU PLASTIC HOLDER RUBBER RING METAL RING AND THREADED NUT ONTO THE PIN TIGHTEN THE NUT 4 SCREW SPRAY HOSE TO THE BRASS PIPE NOT LABELED HOT OR D ATTACH SILVER PRESSURE UCER FOR HIGH PRESSURE ES ATTACH SUPPLIED 5 CONNECT THE FEMALE END NTERWEIGHT TO THE HOSE OF THE FLEXIBLE HOSES TO THE COLD AND HOT WATER SUPPLY 6 AFTER INSTALLATION IS COMPLETE TURN ON THE WATER SUPPLY
Download Pdf Manuals
Related Search