KRAUS KPF-1602-KSD-30CH Installation Guide
Contents
1. J In order to maintain your faucets original finish simply rinse with warm clean water and blot dry with a clean N soft cloth only Avoid using corrosive detergents polishers scrapers or any other abrasive materials In case a buildup of dirt or mineral deposits should occur gently remove it using a mild detergent or a mixture of vinegar with water to soften the build up and clear it away Rinse thoroughly and immediately with water to assure no detergent remains on the surface and dry with a soft cloth At Kraus your satisfaction with quality and durability of our products is extremely important to us Therefore we hope for you to keep our recommendation as a reminder in order to prolong the lifespan of your faucet J Contact us toll free at 1 800 775 0703 or visit our website at www kraususa com Copyright 2008 2009 Kraus USA Inc2. J te ip Sp Cia 0 2 MODEL KPF 1602 Product Description and Measurements Installation Instruction Single Lever Pull Out Sink Mixer Thank You Dear Valued Customer Kraus would like to take this opportunity to thank you for purchasing Kraus products It is our sincere hope that you are completely satisfied with your new purchase We welcome any questions or comments you may have and look forward to assisting you in the future Sincerely Kraus customer service department Prior To Installation Steps 1 Unpack your new product and ensure that all the parts are contained in the packaging 2 Keep the product in its original box until you are ready to install it 3 Shut off the water supply if replacing a previously installed faucet 4 Observe all plumbing and building codes in your area 5 It is recommended that installation of the product be done by a professional plumber Installation Steps Shut off all water supply prior to installation Situate the sprayer holder 7 onto the faucet body 10 Tighten the sprayer holder 7 with the screw 8 Screw on the sprayer 1 onto the connector 3 Make sure that a black rubber washer is attached to the end of the hose prior to attaching the aerator head Place the metal ring 11 onto the faucet body 10 above the countertop Unscrew the brass nut 16 from the brass screw 13 Place the faucet on the coun
3. tertop If the countertop is thin or the faucet is being mounted on the sink itself place the countertop extender 18 from underneath the countertop and tighten it onto the brass screw Optional 9 Place the rubber washer 15 and then the metal washer 14 from underneath the countertop 10 Insert the brass screw 13 into the faucet tighten it 11 Screw the brass nut 16 onto the brass screw 13 12 Screw in the hot and cold waterlines 17 and attach them to the water supply 13 Connect metal spring 4 to faucet body 10 a OND Contact us toll free at 1 800 775 0703 or visit our website at www kraususa com Copyright 2008 2009 Kraus USA Inc bs A p3 Cia U2 Specification Parts List Parts List Quantity Sprayer Rubber Seal Connector Spring Rubber Seal Fixing Ring Sprayer Holder Screw Spout Faucet Body Metal Ring Rubber O Ring Brass Screw Metal Washer Rubber Washer Brass Nut Hot amp Cold Water Lines LC aD K OA ERRERERRR Faucet Extender optional SNAASSSHV SSS Faucet Extender optional Flush the pip Front View Top View Bottom View Contact us toll free at 1 800 775 0703 or visit our website at www kraususa com Copyright 2008 2009 Kraus USA Inc a ip Sp Cia 0 2 MODEL KPF 1602 Installation Instructions Down Cold water Care amp Maintenance
Download Pdf Manuals
Related Search