American Standard 8344012.004 Installation Guide
Contents
1. for leaks IF WALL MOUNTING PLATE 3 is not Operate HANDLES to flush water fastened to a wall support within the lines thoroughly wall use wall anchors with MOUNTING SCREWS 5 Turn HANDLES to OFF position and replace AERATOR 1 Mark mounting hole location on wall and fasten MOUNTING PLATE 3 to wall with Thread ESCUTCHEONS 2 MOUNTING SCREWS 5 provided against finished wall E To change direction of handle rotation proceed as follows Turn HANDLE to OFF position Remove HANDLE SCREW and HANDLE a Remove SPRING CLIP 1 a Lift STOP WASHER 2 turn 90 and replace Replace SPRING CLIP 1 Replace HANDLE and HANDLE SCREW If spout drips operate handles several times from OFF to ON position Do not force handles turn only 90 CARE INSTRUCTIONS DO SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER DRY WITH A SOFT COTTON FLANNEL CLOTH DO NOT DO NOT CLEAN THE PRODUCT WITH SOAPS ACID POLISH ABRASIVES HARSH CLEANERS OR A CLOTH WITH A COARSE SURFACE M965049 Rev 1 12. Installation Instructions Exposed Wall Mount 8344 012 002 Sink Faucet with Top Brace 8344 012 004 Thank you for selecting American Standard the benchmark of fine quality for over 100 years To ensure that your installation proceeds smoothly please read these instructions carefully before you begin Certified to comply with ANSI A112 18 1M M965049 Rev 1 1 RECOMMENDED TOOLS IA Channel Locks Adjustable Wrench Plumbers Putty or Caulking Phillips Screwdriver ROUGHING IN DIMENSIONS FINISHED WALL 12 1 2 317mm BACKFLOW PREVENTER FEMALE ROUGH IN FINISHED WALL m Prepare water supply lines per Roughing in Dimensions Install 1 2 NPT SUPPLY NIPPLES evi ORES 1 2 NPT FEMALE THREADS J 1 2 NPT SUPPLY NIPPLE 1 2 to 1 2 FINISH INSTALLATION Slide COUPLING NUTS 5 onto INLET SHANKS 3 Thread ESCUTCHEONS 2 fully onto INLET SHANKS 3 Thread INLET SHANKS 3 onto SUPPLY NIPPLES 1 Distance between INLET SHANK 3 outlets must be 8 to match the VALVE Insert RUBBER WASHERS 4 into INLET SHANK 3 Attach VALVE 6 to INLET SHANKS 3 Tighten both COUPLING NUTS 5 firmly E Attach SPOUT BRACE 1 to SPOUT 2 f gal Turn HANDLES TO OFF POSITION and WALL MOUNTING PLATE 3 with the jf SPOUT BRACE SCREWS 4 provided I Slowly turn water supplies on and Sy check all connections
Download Pdf Manuals
Related Search