Pegasus 4185-CP Installation Guide
Contents
1. Converto Cat No A Shower Unit 4185 A BARCLAY INSTALLATION INSTRUCTIONS Package Contains Tub Spout 185 S Gooseneck Riser Pipe 185 R Wall Support Bracket w Screws 185 WS Shower Head 1003 Tools Needed e Phillips Screwdriver Level 1 4 Drill Bit e Wrench Wood Screws Set Screw e 1 Before beginning any work be sure to shut off the water supply 2 Remove your present tub spout by using an open end wrench and turning counter clockwise You will see a pipe protruding from the wall which is either half inch or three quarter inch If it is a half inch pipe then installation will require the use of the 3 4 X 1 2 face bushing that is already attached to the spout If the pipe is three quarter inch then the face bushing should be removed from the spout 3 Thread the new tub spout on the pipe Turn clockwise as far as you can by hand Then carefully use a wrench and turn once more Be sure to pad the chrome before using the wrench to prevent damage to the finish NOTE It might be desirable to shorten the pipe nipple protruding from the wall so the new spout is flush to the wall 4 Assemble shower head to gooseneck riser pipe 5 Slip the wall bracket over the straight end of the riser pipe Carefully slide the bracket to the appropriate position approximately half way up the rod and tighten the set screw provided 6 Assemble riser pipe to the riser coupling assembly on the spout by tightening the couplin2. g nut After hand tightening fasten securely by using a wrench 7 Secure wall support bracket to the wall using the wood screws provided 8 Turn on water supply 12 4 07 P 8472441234 www barclayproducts com
Download Pdf Manuals
Related Search