Sunjoy D-GZ731PST-G Instructions / Assembly
Contents
1. Fig 11 Expand Big Fig 12 Put Shelf J on Fig 13 Secure the gazebo canopy L secure it to Screen K to the ground by using the the four corners of the lakeaS BB oblique beam and the middle beam CARE AND MAINTENANCE This gazebo is intended for decorative and sunshade purposes only and is not designed to withstand hard weather including high winds rain and snow In order to avoid damages remove accumulated water on the roof immediately or disassemble the gazebo Disassemble the gazebo in the reverse order of the assembly steps Always disassemble the gazebo completely A partially disassembled gazebo is not stable enough to resist wind and bad weather and therefore can be damaged and or cause damage Do not use bleach acid or other abrasive cleaners on the roof or frame parts Steel components of garden accessories and furniture are treated with rust inhibiting paint However due to the nature of steel surface oxidation rusting will occur if this protective coating is scratched This is a natural process To minimize this condition it is recommended that care be taken when assembling and handling the product in order to prevent the paint from being scratched Surface rust can be removed easily using a very light applicati2. 4 Long oblique beam G 4 Oblique beam H 4 Beam 4 Shelf J 4 Screen K 4 TZ 7 Big canopy L 1 Small canopy M 1 Hardware Pack 1 Fig 1 Insert Beam I into Screen K Fig 2 Insert Long oblique beam Fig 3 Insert Long oblique beam Fig 4 Insert Oblique beam H G into Oblique beam H G into the Connect tube D into Screen K Fig 5 Insert Middle beam F into Fig 6 Insert Middle beam F into Fig 7 Insert Short oblique beam Connector D then assemble the Beam I Put on the Big canopy C into Top connector B Top hook E on the connector D L and do not unfold first Fig 8 Put on the Small canopy M on small top Hardware Pack 3 Dia 6x180MM Stake Fig 9 Insert Finial A into Top Fig 10 Insert the assembled small connector B dome into Long oblique beam G by Short oblique beam C
3. Assembly Instructions ltem D GZ731PST G RRS ne RES SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble operate or install the product For technical assistance on assembly or replacement parts Please call Sunjoy Industries at 1 866 578 6569 from 8 30 AM to 5 30 PM EST Monday to Friday WARNING 1 When installing and assembling your gazebo it is recommended that 2 or more adults are involved 2 This product is intended for outdoor use only and should be placed on flat horizontal ground 3 Ensure enough clearance around the product 4 Do not use the unit during an electrical storm as there is a remote chance of getting struck by lightning 5 Do not climb on top of the gazebo Falling off the gazebo can result in serious injury possibly even death 6 Never barbecue under this gazebo or use lanterns that contain naked flames 7 This
4. on of common cooking oil If surface oxidation rusting occurs and no measures are taken to correct it the oxidation may start dripping onto the assembly surface which may cause damaging stains that may be difficult to remove If the product will not be used for a long period e g winter time it should be stored in a clean dry environment Keep the original packaging to store the gazebo Important For technical assistance on assembly or replacement parts Please call Sunjoy Industries at 1 866 578 6569 from 8 30 AM to 5 30 PM EST Monday to Friday or fax the replacement part form which is in the box to 740 283 3549 or Email customer care sunjoygroup com for assistance Made in China
5. package contains small items and plastic bags that should be kept away from children 8 Ensure that all connectors amp poles are firmly secured in position fully It is important to do so before use so as to avoid collapsing or damage to the item which could result in injury 9 WARNING Keep all flame and heat sources away from this tent fabric This tent is made with fabric that meets CPAI 84 specifications for flame resistance It is not fire proof The fabric will burn if left in continuous contact with any flame source The application of any foreign substance to the tent fabric may render the Flame resistant properties ineffective 10 WARNING Please take down the gazebo during strong wind The manufacturer or retailer is not liable for any loss of the product or other items due to the failure to take down the gazebo during strong wind 11 Hook maximum weight 26 Ibs PREPARATION Before beginning assembly of product make sure all parts are present Compare parts with package contents list If any part is missing or damaged do not attempt to assemble the product Estimated Assembly Time 10 minutes No Tools Required for Assembly Parts List Description Part Quantity Image Finial A 1 Top connector B 1 fi Short oblique beam C 4 i Connector D 1 Oe Top Hook E 1 De Middle beam F
Download Pdf Manuals
Related Search