Martha Stewart Living 1363400410 Instructions / Assembly
Contents
1. EAST TWO PEOPLE NOTE TURN THE CAM BOLT SCREWS UNTIL THEY ARE TIGHT THE SHOULDER SHOULD BE AGAINST THE SURFAGE OF THE PART HOW TO USE THE CAM TOOL ER ARROW NOTE THE ARROWS ON THE HIDDEN CAM LOCKS SHOULD POINT TO THE CAM BOLTS 4 10 1 ASSEMBLE THE LEFT SIDE PANEL ROTATE 1 CAM BOLT H INTO THE HOLE IN THE LEFT SIDE e PLACE CAM BOLT H INTO THE HOLE IN THE PANEL F AND ATTACH USING 1 CAM LOCK I 2 ASSEMBLE THE RIGHT SIDE ROTATE 1 CAM BOLT H INTO THE HOLES IN THE RIGHT SIDE PLACE CAM BOLT H INTO THE HOLE IN THE PANEL F AND ATTACH USING 1 CAM LOCK I 5 10 3 ASSEMBLE THE TOP PANEL A e ROTATE 4 CAM BOLTS H INTO THE HOLES IN THE TOP PANEL A e PLACE CAM BOLTS H INTO THE HOLES IN THE PANEL B C AND ATTACH USING 4 CAM LOCKS I 4 ASSEMBLE THE UP ADORNING PANEL ATTACH THE UP ADORNING PANEL E TO PANEL A B C USING 4 SCREWS O 6 10 5 ASSEMBLE THE BACK PANEL 6 ATTACH THE BACK PANEL G USING 26 SCREWS K 6 ASSEMBLE CIRCINAL WOOD L INSERT THE CIRCINAL WOOD L INTO THE HOLES IN PANEL B C WHEN INSTALLED PLS PUT THE CIRCINAL WOOD L IN IT FROM THE LEFT SIDE PANEL B THEN PUT IT INTO THE RIGHT SIDE PANEL C WHEN DISMANTLED PLS REMOVE THE RIGH2. HOME DECORATORS COLLECTION BF 25066 HUTCH WITH REMOVABLE CLOTHING ROD amp ADJUSTABLE SHELVES INV 13634 ASSEMBLY INSTRUCTIONS Made In China 1 10 Thank you for purchasing this guality product Be sure to check all packing material carefully for small parts which may have came loose inside the carton during shipment Count all parts and material hardware then compare with parts list to be sure all parts are present If any parts are missing or damaged phone fax or mail to our Customer Service Department for efficient and speedy service Please indicate the model number and code letter of part s needed IMPORTANT NOTE Follow instructions listed below in proper sequence as numbered to assure fast easy and correct assembly PARTS LIST TOP PANEL 1PC RIGHT SIDE PANEL 1PC SHELVES 2PCS C BACK PANEL 1PC CAM BOLTS 6PCS J 5 8 CAM TOOL 1PC SCREWS 34PCS CIRCINAL WOOD 1PC 2 10 6mmx 3 4 8mmx 1 1 2 Ww v SHELF SUPPORTS 8PCS SCREWS 4PCS SCREWS 4PCS P 7mmx 7 8 SCREWS 4PCS HOOKS 4PCS PLATES 2PCS GECKOS 4PCS PLASTIC BELTS 2PCS CAM LOCKS CAPS 4PCS NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE 3 10 e OPENING THOROUGHLY CLEAN ALL WOOD SURFACES REMOVE DUST AND DIRT THAT MAY HAVE SETTLED ONTO FINISH DURING SHIPMENT IN ORDER TO PREVENT DAMAGE DURING ASSEMBLY PLEASE ASSEMBLE THIS ITEM WITH AT L
3. T SIDE PANEL C FIRST 7 10 7 ASSEMBLE THE SHELF SUPPORTS M AND CAM LOCK CAPS U ATTACH 4 CAM LOCKS I USING 4 CAM LOCK CAPS U INSERT 8 SHELF SUPPORTS M INTO THE HOLES IN THE PANEL 8 ASSEMBLE THE SHELVES D PLACE THE SHELVES D ONTO THE SHELF SUPPORTS M 8 10 Warning The anti tip hardware must be used as part of assembly 9 ASSEMBLE THE HOOKS Q AND PLATE R ATTACH 2 HOOKS Q USING 4 SCREWS N IN THE PREDRILLED HOLES OF REAR TOP PANEL ATTACH 2 PLATES R TO SIDE PANEL B C USING 8 SCREWS K 9 10 10 ASSEMBLE THE ANTI TIP HARDWARE DRILL 4 HOLES INTO THE WALL PLEASE REFER TO THE REAR TOP PANEL S HOLES DISTANCE AND HEIGHT PUT 4 GECKOS S INTO HOLES IN THE WALL AND ROTATE 4 SCREWS P INTO THE GECKOS S CONNECT THE TWO HOOKS Q WITH A PLASTIC BELT T 10 10
Download Pdf Manuals
Related Search