NewAge Products 32287 Installation Guide
Contents
1. 8 Large Washer 16 Lock Washers 2 2 5 Wall Screw N JEn 27 ijo 4 5 8 Wood Screw 24 GAGE STEEL RTA TOOL CABINET i NEED MORE INFORMATION TRY WWW NEWAGEPRODUCTS COM on 1 877 306 8930 For ANSWERS TO COMMONLY ASKED QUESTIONS 24 GAGE STEEL RTA TOOL CABINE 1 Use the M5 screw and M5 nut to 2 Assemble the left and right assemble the two back panels side panel with the same screw and nut D Goes on the outside of A and C goes on the outside of B 4 Flip the cabinet over Use M8 screw washer and M8 nut to assemble the adjustable legs on the bottom panel 5 Turn the cabinet back upwards and assemble drawers See drawn assembly instructions on next page 3 Panel E sits on the outside of A and B and on the inside the same for panel F 6 To install drawers line up runners on the side of the drawer with the track on the inside of the cabinet and guide it into place NEED MORE INFORMATION TRY WWW NEWAGEPRODUCTS COM or 1 877 306 8930 For ANSWERS TO COMMONLY ASKED QUESTIONS 24 GAGE STEEL RTA TOOL CABINE DRAWER ASSEMBLY 1 Bend the two sides of DRAWER BOTTOM Y upwards to create the side walls The Steel Metal Runners should be on the outside of the drawer EE 2 Insert the edge of Z with 3 notches into the back of DRAWER BOTTOM Y usin2. resulting from improper handling or shipping of products or products damaged by accident misuse abuse fire flood improper installation acts of God neglect corrosion modification or mishandling 3 Products damaged by improperly loading beyond the specified maximum weight capacity outlined in the instructions provided with the product 4 Repairs or replacement when your product is used in other than normal single family household use such as a commercial environment or handled in any way inconsistent with the installation instructions included with the product 5 Cosmetic damage including scratches dings dents or cracks in paint that do not affect the structural or functional capability of the product Surfaces damaged due to chemical interaction resulting in corrosion of paint or metal Replacement parts for NewAge products outside Canada and the United States Replacement keys or locking mechanisms Loss of product contents due to left fire flood accident or acts of God 0 Shipping or freight fees to deliver replacement products or to return defective products 1 Any labor costs during the limited warranty period DISCLAIMER OF IMPLIED WARRANTIES LIMITATION OF REMEDIES IMPLIED WARRANTIES INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED T
3. 24 GAGE STEEL RTA TOOL CABINE 01 READ THIS FIRST BEFORE UNPACKING CABINET ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL AS PER THESE INSTRUCTIONS FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY AND VOIDS PRODUCT WARRANTY AND MANUFACTURER S LIABILITY WARNING DO NOT OVERLOAD CABINETS CABINETS ARE DESIGNED TO CARRY THE FOLLOWING MAXIMUM WEIGHT CAPACITIES PARTS AND HARDWARE SUPPLIED WITH BASE CABINET QTY ITEM IMAGE 1 Locking Rod E 47 M5 Frame Screw DO NOT LEAVE CHILDREN UNATTENDED NEAR CABINETS 47 M5 Frame Nut 362 WHEN FULLY LOADED CABINETS ARE HEAVY AND THERE IS A RISK OF CABINETS OR ITEMS TIPPING IF IMPROPERLY OPENED CABINET SHOULD BE MOUNTED TO WALL TO AVOID INJURY WARNING EXCESSIVE WEIGHT HAZARD Use two or more people to move assemble or install cabinet or locker Failure to do so can result in back or other injury UNPACKING OF THE CABINET Begin by placing the cabinet on a sound level surface e Remove all cardboard and foam packaging material e Remove clear plastic bag Dispose recycle all packaging materials Remove and verify all the contents in the box See Parts and Hardware Supplied List NEED MORE INFORMATION TRY WWW NEWAGEPRODUCTS COM on 1 877 306 8930 For ANSWERS TO COMMONLY ASKED QUESTIONS 4 Adjustable Leg cQ 16 M8 Leg Screws lt 16 8 Leg Screw Nut 18
4. O ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS LASTS SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE NEED MORE INFORMATION TRY WWW NEWAGEPRODUCTS COM on 1 877 306 8930 For ANSWERS TO COMMONLY ASKED QUESTIONS
5. by shifting the cabinet slightly 6 Place a small magnetic level on top of the wall cabinet and adjust the orientation of the cabinet to bring it to a level position 0 7 Once leveled using the supplied mounting hardware fasten 2 5 V cabinet mounting lag bolt with a large washer through the cabinet and into the stud This can be done by hand with a 7 16th socket wrench or a cordless power drill with a 7 16th socket attachment Do not over tighten bolts Once the fender is sitting tightly flush with the backside of the cabinet stop 8 Repeat Step 6 three additional times with the remaining mounting hardware to install the wall cabinet You will only repeat this one more time for the locker as it only has 2 mounting lag bolts WALL AND LOCKER CABINET WALL MOUNTING INTO CONCRETE BLOCK MASONRY WALL NOTE Masonry Hardware NOT Included REQUIRED HARDWARE 2 4 x Ya Tapcon Concrete Anchor 4 Or 10 x 2 Screw with 3 16 masonry plug 4 1 Place the wall cabinet into position tight against the supporting wall 2 Open the doors and locate the perforated mounting strip on the top and bottom of the backside of the cabinet 3 Place a small magnetic level on top of the wall cabinet and adjust the orientation of the cabinet to bring it to a level position 4 Using a hammer drill drill 4 pilot holes through the perforated strip in the backside of the cabinet and through the wall 5 Usin
6. g a mallet to wedge into place Make sure all the notches at tops and sides of Y are snapped into notches on Z PRODUCIS INC Below is what it will look like when Z has fit into the notches along the side and bottom of Y Notch Notch 3 Insert the edge without the ridge of DRAWER PANEL W at the other side of DRAWER BOTTOM Y You may use a mallet to apply force Note Drawer bottom must rest on the inside of DRAWER PANEL W 4 Insert the SUPPORT PANEL X at the back of the DRAWER PANEL W be sure to insert this with the ridges edge upwards Bang into place with a mallet Once it passes the notches it s locked in NEED MORE INFORMATION TRY WWW NEWAGEPRODUCTS COM on 1 877 306 8930 For ANSWERS TO COMMONLY ASKED QUESTIONS 24 GAGE STEEL RTA BASE CABINE a 9 ASSEMBLY INSTRUCTIONS ENABLING LOCKING MECHANISM 1 Locate black vertical locking column attached to back inside of cabinet this slides up and down Push upwards to expose small CABINET LEVELING ae for all cabinets except for wall cabinet i 1 Place a small magnetic level onto the top of the cabinet to verify the levelness of the cabinet 2 If the floor slopes and the cabinet is not level lift the adjustable sleeve on the leg and adjust the cabinets height adjustable leveling leg by turning the nut on top of the cabinet s foot up or down to bring the cabinet to a level position This may req
7. g either the 2 4 x 14 Tapcon Concrete Anchor or 10 x 2 Screw with 3 16 masonry plug method and the supplied fender washers fasten the cabinet directly to the wall This application requires a cordless power dill with a 2 Philips bit for ease of installation 6 Repeat Step 3 4 three additional times with the remaining mounting hardware THANK YOU for your purchase Please give us a call or visit us online if you have any other questions or comments Give us your feedback for a chance to WIN Take our quick 2 minute survey and enter for your chance to win something FREE from NEWAGE Visit the website for details at www newageproducts com NEW GE 2E INC THE ORGANIZED GARAGE 201 Chrislea Road Vaughan ON Canada 1 877 306 8930 www NEWAGEPRODUCTS com NEED MORE INFORMATION TRY WWW NEWAGEPRODUCTS COM or 1 877 306 8930 For ANSWERS TO COMMONLY ASKED QUESTIONS NEWAGE PRODUCTS INC STEEL CABINETRY WARRANTY 1 YEAR LIMITED MANUFACTURER WARRANTY NEWAGE For one year from the date of purchase when this product is installed operated and maintained according to the instructions attached to or furnished with the product NewAge Products Inc will replace the defective product or parts if the part fails as a result of defective materials or workmanship NEWAGE PRODUCTS INC WILL NOT PAY FOR 1 Service calls to correct the installation of any NewAge products or to instruct you how to use or install them 2 Damage
8. tracks The drawer should slide back into place Push the drawer fully into the cabinet then pull it out to full extension If the drawer does not stop at full extension or feels loose the drawer has not been put back into the drawer slides properly Ensure both drawer slides attached to the drawer are running along the drawer slides attached to the frame of the cabinet NEED MORE INFORMATION TRY WWW NEWAGEPRODUCTS COM or 1 877 306 8930 For ANSWERS TO COMMONLY ASKED QUESTIONS 24 GAGE STEEL RTA TOOL CABINET 9 a MOUNTING CABINETS INTO DRYWALL STUDDED WALL WARNING ALL CABINETS MUST BE MOUNTED TO STUDS BEFORE LOADING THE CABINETS WITH ITEMS Each locker or base cabinet must be mounted to the wall with at least two of the provided mounting screws Each wall cabinet must be mounted with four screws 1 Using a stud finder locate the studs in the wall where the wall cabinet is to be placed 2 Once studs are located using a pencil and a level mark a vertical line to indicate stud location ES 3 Place the cabinet into position tight against the supporting wall 4 Open the doors and locate the perforated mounting strip on the top and bottom of the backside of the cabinet Note the cabinet has a perforated strip of holes at the top and bottom of the cabinet the locker only has a perforated strip at the top of the cabinet 5 Align the previously marked stud lines with a perforated hole
9. uire Bo one 2 Locate Locking Rod and insert the tip of the bent end into hole 3 The cabinet must be adjusted front to back and side to side 4 Donot put items in the cabinet until the leveling process is complete MOUNTING OF THE WORKTOP optional for base cabinets NOTE Base Cabinet Drawers must be removed prior to mounting Worktop Pull each drawer out to full extension simultaneously depress the left lock up and right lock down in each slider 3 Locate the locking device at the top inside of tool cabinet and while pulling out the drawer The drawer will slide out of the locate the thin slit between the locking device Remove the pin tracks ready to remove See the diagram to note where the attached to the cabinet lock and set aside Do not discard Using locks are on the drawer slides the other end of the Lock Rod with a hole through it align this with the lock hole 1 Place the Worktop on top of both the base cabinet 2 Align the Worktop so that it is flush with the side of the base 4 Once holes are aligned insert the pin through both to lock into cabinet place between lock slit 3 Using the supplied Worktop hardware fasten screws through the cabinet top into the Worktop A cordless power drill is required to drive the screws into the Worktop 5 Test the lock Locking device is now ready 4 Put drawers back into base cabinet by aligning them with the ball bearing slides drawer
Download Pdf Manuals
Related Search