Martha Stewart Living 1914700400 Instructions / Assembly
Contents
1. 3 ASSEMBLE THE BOTTOM PANEL e ROTATE 4 CAM BOLTS K INTO THE HOLES IN THE BOTTOM PANEL E e PLACE CAM BOLTS K INTO THE HOLES IN THE SIDE PANEL B C AND ATTACH USING 4 CAM LOCKS L 4 ASSEMBLE THE TOP PANEL A e ROTATE 4 CAM BOLTS K INTO THE HOLES IN THE TOP PANEL A e PLACE CAM BOLTS K INTO THE HOLES IN THE SIDE PANEL B C AND ATTACH USING 4 CAM LOCKS L 6 8 2212 5 ASSEMBLE THE ADORNING PANEL F e ATTACH THE ADORNING PANEL F TOP PANEL A USING 2 SCREWS N 6 ASSEMBLE THE BACK PANEL 0 e ATTACH THE BACK PANEL D USING 14 SCREWS 7 8 N 7 ASSEMBLE THE SHELF SUPPORTS T e INSERT 8 SHELF SUPPORTS 1 INTO THE HOLES IN THE SIDE PANEL B C H 8 ASSEMBLE THE SHELVES e PUT THE SHELVES ONTO THE SHELF2. HOME DECORATORS COLLECTION BF 25172 MARTHA STEWART LIVING MUDROOM NARROW CREDENZA 30 Hx20 Wx16 D INV 19147 ASSEMBLY INSTRUCTIONS Made In China 1 8 Thank you for purchasing this quality product Be sure to check all packing material carefully for small parts which may have came loose inside the carton during shipment Count all parts and material hardware then compare with parts list to be sure all parts are present are missing or damaged phone Department for efficient and speedy service If any parts fax or mail to our Customer Service Please indicate the model number and code letter of part s needed IMPORTANT NOTE Follow instructions listed below in proper sequence as numbered to assure fast easy and correct assembly PARTS LIST A TOP PANEL 1PC LEFT SIDE PANEL 1PC C RIGHT SIDE PANEL 1PC D BACK 1 BOTTOM 1 F ADORNING PANEL 1PC G wee ACROSS PANEL 1PC H SHELVES 2PCS SHELF 50 5 48 5 J VY CAM TOOL 1PC K CAM BOLTS 12PCS L Fab 1 0 5 12 5 2 8 7 5 8 N 8mm 1 5 8
3. 5 5 14 5 SCREWS 2PCS SCREWS 8PCS P PLATES 2PCS NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE NOTE e UPON OPENING THOROUGHLY CLEAN ALL WOOD SURFACES TO REMOVE DUST AND DIRT THAT MAY HAVE SETTLED ONTO FINISH DURING SHIPMENT IN ORDER EM WITH AT TO PREVENT DAMAGE DURING ASSEMBLY PLEASE ASSEMBLE THIS IT LEAST TWO PEOPLE NOTE TURN THE CAM BOLT SCREWS UNTIL THEY ARE TIGHT THE SHOULDER SHOULD BE AGAINST THE SURFACE OF THE PART __ SHOULDER HOW TO USE THE CAM TOOL NOTE e THE ARROWS ON THE HIDDEN CAM LOCKS SHOULD POINT TO THE CAM BOLTS 4 8 ASSEMBLE THE LEFT SIDE PANEL e ROTATE 2 CAM BOLTS K INTO THE HOLES IN THE LEFT SIDE PANEL e PLACE CAM BOLTS K INTO THE HOLES IN THE ACROSS PANEL G AND ATTACH USING 2 CAM LOCKS L 2 ASSEMBLE THE RIGHT SIDE PANEL e ROTATE 2 CAM BOLTS K INTO THE HOLES IN THE RIGHT SIDE PANEL e PLACE CAM BOLTS K INTO THE HOLES IN THE ACROSS PANEL G AND ATTACH USING 2 CAM LOCKS L 5 8
4. SUPPORTS 1 8 8
Download Pdf Manuals
Related Search