Edsal UR1872 Instructions / Assembly
Contents
1. Parts List Uprights Braces Woodboard RMF _UR1836 8 RLSU36 10 RMF1i8 0 RMB36 UR2436 8 RLSU36 10 RMF24 10 RMB36 UR1848 8 RLSU36 10 RMF18 10 RMB48 UR2448 8 RLSU36 10 RMF24 10 RMB48 UR1860 SK 8 RLSU36 10 RMF18 10 RMB60 UR2460 SK 8 RLSU36 UR3660 SK 8 RLSU36 UR1872 SK 8 RLSU36 UR2472 SK 8 RLSU36 UR3672 SK 8 RLSU36 ___ 10 RMF36 10 RMB72 Contact Information Should you have any comments or problems with the assembly of this unit please contact Edsal Manufacturing at 773 475 3000 and request Customer Service or customerservice edsal com Edsal Manufacturing has made every effort to assure that all units are complete and undamaged However should your unit have damaged or missing parts replacements can be obtained directly from Edsal Manufacturing at 773 475 3000 and asking for Customer Service or customerservice edsal com To obtain replacement parts please provide the following information Model Part amp Description Location Purchased Date Purchased www edsal com The Innovative Source For Storage Systems amp Workplace Furniture Edsal Manufacturing Company 4400 South Packers Avenue Chicago IL 60609 add woodboard if purchased with the kit to the level Assemble top post on battom post by using two 2 braces and two 2 beams One 1 rivet from each beam and to the level ___Part list and contact information on back2. eams see Top Lightly figure C Skip one hole form the bottom of posts and tap lightly to seat rivets Bottom Post Woodboard previously built level see figure D then continue working by Tap Lightly i Tap Post adding a second level using two 2 braces and two 2 j K 1i Continue by adding woodboard if purchased with kit to the 8 f beams in the post slots of your desired location Again place DE rPe the rivets of the braces and beams into slots of the post then tap lightly to properly seat the rivets see figure B Again Figure C brace must be placed in the top hole of the bottom post and the bottom hole of the top post see figure E After all beams and braces are in place tap lightly to properly seat the rivets Again add woodboard if purchased with the kit Continue by adding the fourth and fifth level by using two 2 braces and two 2 beams per level in the post slots of your desired location Again place the rivets of the braces and beams into the slots of the post and tap lightly to properly seat the rivets Add the remaining woodboard if purchased with the kit to complete the assembly process i en i Es
3. side Safety Instructions These units should be placed on a level surface Failure to do so can result in poor performance or create a possible safety hazard This unit sho uld be securely anchored to a wall or floor with suitable fasteners which are not included Do not use purpose Do not stand on any part of the unit or use it as a evel and always keep the heavier loads near the bottom Use this product for anything other than the manufacturers intended ladder Do not overload Evenly distribute the weight on each care when working with metal parts General Instructions Assembly is done with the rivets of the beams and bra the beams and braces to seat the rivets between the hammer head and the engaged ces fitting into the slots of the uprights A rubber mallet may be used on properly A hammer can also be used providing one uses a cloth or block of wood parts to prevent damage Tap gently and be sure that the rivets are straight and fully Assembly Instructions Braces Upright RMF Top Post Figure D Used for all units Used for all units Used for all units Assemble two 2 post with one 1 brace Skipping one slot from the bottom of each post see figure A place the rivets into the slots of each post with the flat part of the brace facing up and tap lightly to properly seat the rivets see figure B Repeat with two 2 post and one 1 brace Figure B Assemble the two 2 post units with two 2 b
Download Pdf Manuals
Related Search