POWERNAIL 445FSFLEXPRW Instructions / Assembly
Contents
1. Step 6 Disconnect air when clearing jams servicing or when tool is not in use 7 Use only clean dry regulated air not to exceed 120 psi 8 Never use oxygen or other Loading Unloading bottled gasses explosion may occur 9 Do not tie down alter or remove Safety Trigger Model 445FS in use2. POWERNAIL USA Operation and Safety Guide I ka i Pneumatic Stapler Model 445FS Vendor Website www powernail com Support Phone No 800 323 1653 Installation of hardwood flooring using a 15 gage 1 2 crown staple SAFETY TOPICS Tool Operation i Read and understand all safety a V Connect air source regulated at 90 psi instructions and tool labels before y Operating 2 Make sure flooring strips are together tightly 3 Place nailer on tongued edge of flooring Air pressure not to exceed 120 psi Please visit www powernail com Pull safety trigger and strike the plunger with rubber end of the mallet The nailer will drive and set the nail at the correct 45 degree SAFETY CHECKLIST angle 1 Operators and others in work Loading Unloading Tool ee ee ae tion protection Use safety glasses with Loading Slide a clip of nails into the end of the nail channel feed slot side shields Pull back the black nail pusher past the nails and let go Tension is now applied to the nails for use Unloading Pull back on the black nail pusher and hold 3 l 2 Only use rubber end of mallet to strike the plunger Tilt nailer back until nails slide out of nail channel 3 To avoid accidental discharge attach air hose first before loading nails in channel 4 NEVER point tool at yourself or others in the work area 5 Only connect air to an unloaded tool and always keep tool pointed in a safe direction
Download Pdf Manuals
Related Search