Whirlpool CAE2743BQ Instructions / Assembly
Contents
1. onto the spring bracket 15 Insert coins in the amount of the new set vend price into the coinslide and push the slide in to eject the coins If the coins do not eject look for missing parts and go back to Step 7 16 While holding the slide in insert the A coinslide into the metercase making sure A WA R N J N G the extension clears the coin funnel Fig 1 17 Pull down slightly to lock the coinslide uly into place Fig 2 Electrical Shock Hazard Plug into a grounded 3 prong outlet Do not remove ground prong Do not use adaptor Do not use an extension cord Failure to follow these instructions can result in death fire or electrical shock Fig 1 Fig 2 18 Insert the coinslide retaining bolt through the console access panel into the back of the coinslide and hand tighten the bolt to start the threads prior to using any tools to avoid stripping the coinslide or retaining bolt threads 19 Affix the proper new vend price sticker to the front of the coinslide2. COINSLIDE PRICE VEND CHANGE INSTRUCTIONS 5 Unscrew the coinslide retaining bolt with a 5 16 socket by turning counter clock wise and remove the bolt The following procedure will guide the user through changing the coinslide vend amount for a factory equipped or ESD vertical 8 coinslide The procedure will be similar for other coinslide manufacturers consult the manufacturers installation instructions If the coinslide s are installed they must be removed prior to changing the vend price If the coinslide s have not yet been installed skip to step 6 A WARNING A Electrical Shock Hazard Disconnect power before servicing Replace all panels before operating Failure to do so can result in death or electrical shock 1 Unplug unit or disconnect power 2 Unlock the metercase access panel or collar control panel lock and remove the control panel from the collar assembly 3 On single washer and dryer models lift the metercase access panel up at the back and remove 4 On mechanical stack dryer models open the console by lifting it up off the bottom mounting flange On electronic stack dryers slide the control panel to the left then carefully open the control panel by swinging the right side away from the collar 6 Push the coinslide up and then pull it forward to remove from the metercase 7 Set the coinslide and extension assembly on a level surface and remove the return spring s from th
3. e spring bracket 8 Place coins in the coinslide of the proper vend amount factory preset on coin equipped models is 1 00 and push the slide all the way in until the coins drop through the coinslide 9 With the slide still all the way inserted remove the spring bracket screw and spring bracket 10 Remove the coin inserts 2 blanks 2 functional from the coinslide are NOTE The coinslide comes with enough inserts to increase or decrease the vend price by 50 if a higher or lower vend price is desired more functional or blank inserts are necessary Inserts may be ordered from Whirlpool Corporation only for models that come factory coinslide equipped If the coinslide is other than Whirlpool factory equipped additional inserts must be ordered from the coinslide manufacturer page 13 25 US insert Whirlpool Corp Part No 8316265 Insert blank Whirlpool Corp Part No 8316264 11 Turn the coinslide upside down and remove the three screws in the insert retaining plate 12 To increase the vend price remove blank inserts and install the metal functional inserts To decrease the vend price remove functional inserts and replace with blank inserts 13 Reinstall the three insert retaining plate screws Turn the coinslide over and place unused inserts up to 4 in the slide storage Reinstall spring bracket and screw 14 Release the slide and reinstall the coinslide return spring s
Download Pdf Manuals
Related Search