GE CW9000SJSS Use and Care Manual
Contents
1. Control Knob The warming drawer controls are hidden with the drawer shut Open the drawer The controls are on the right side of the front frame To use the warming drawer press the ON OFF switch to the ON position Slide the moisture selector control to the open or closed setting See the Moisture Selector section ON Signal Light The ON signal light is located below the ON OFF switch and glows when the ON OFF switch is in the ON position It stays on until the ON OFF switch is moved to the OFF position Moisture Selector The moisture selector is located on the inside front of the drawer To keep foods moist slide the moisture selector control away from the control knob This closes the vent and seals the moisture inside the drawer With the vent closed hot foods stay moist and soft In this setting condensation may occur around the inside edge of the drawer 49 80507 6 Turn the control knob to the desired setting 140 160 F 160 195 F 195 230 F The ON signal light is visible through the light viewer in the drawer front panel when the drawer is closed This is a reminder that the heat is on To keep foods crisp slide the moisture selector control to the right towards the control knob This opens the vents and allows the moisture to escape With the vents open it is normal for moisture to collect on surfaces above the warming drawer SOUNQe EVWWaid NAM JHL ONBN USING THE WARMING DRA2. The following products and more are available Accessories 27 Wide Custom Panel Kit ZXD27B 30 Wide Custom Panel Kit ZXD30B 30 Monogram Pro Panel Kit ZXD9030P Parts Wire Rack WB48X10045 Cleaning Supplies CitruShine Stainless Steel Wipes WX10X10007 CERAMA BRYTE Stainless Steel Appliance Cleaner PM10X311 How to Remove Protective Shipping Film and Packaging Tape Carefully grasp a corner of the protective shipping film with your fingers and slowly peel it from the appliance surface Do not use any sharp items to remove the film Remove all of the film before using the appliance for the first time To assure no damage is done to the finish of the product the safest way to remove the adhesive from packaging tape on new appliances is an application of a household liquid dishwashing detergent Apply with a soft cloth and allow to soak NOTE The adhesive must be removed from all parts It cannot be removed if it is baked on 49 80507 6 Features Not all features are on all models Appearance may vary Warming Drawer Moisture Selector on back of panel ie Control Knob O ON OFF Switch L Rating Plate P ON Signal Light Viewer Lens ON Signal Light The warming drawer will keep hot cooked foods at serving temperature Always start with hot food Do not use to heat cold food other than proofing yeast dough crisping crackers chips or dry cereal
3. cutout e A2 minimum clearance between oven and warming drawer cutouts are required Additional clearance may be required if 2 x 4 blocks are used to support runners or solid floor of the oven above The warming drawer may be supported by either a solid bottom 2 x 4 or 2 x 2 runners INSTALLING ANTI TIP BRACE gt AWARNING ant tip precautions The anti tip brace must be installed to prevent the drawer from tipping forward when opened and loaded Failure to do so could result in personal injury 2 x 4 or equivalent runners a 30 gt The support must be level and rigidly mounted flush with the bottom edge of the cutout There is no way to level the drawer once it has been installed Be sure supports are level The entire weight of the drawer is supported by the runners or solid floor and must be capable of supporting 150 lbs Install 2x4 or 2x2 anti tip brace against rear cabinet wall 9 from floor to bottom of brace 2x4 or 2x2 runners or solid bottom __ 49 80507 6 Installation Instructions INSTALLING WARMING DRAWER 1 Slide the left corner into opening and push power cord into the hole leading to the outlet location Thread the cord through as drawer is being pushed back into the opening If the outlet is installed inside the opening plug the cord into the outlet In this location the excess power cord should be coiled and taped to
4. Check to be sure that oven supports above the warming drawer location do not obstruct the required interior 231 2 depth and 9 4 height ILE Allow 5 8 overlap on all sides 29340 NOTE Additional clearance between cutouts may be required Check to be sure that oven supports above the warming drawer location do not obstruct the required interior 23 2 depth and 91 4 height ACAUTION IN CANADA THIS DRAWER IS NOT APPROVED FOR INSTALLATION UNDER A DOUBLE OVEN NOTE If you are installing in frameless cabinets it may be necessary to install 1 2 wide cleats to accept drawer mounting screws See drawer to find exact locations of mounting screws When installed under a wall oven Warming drawers are suitable for installation below only certain specified wall oven models See the label attached to the top of the warming drawer for suitable models NOTE Electrical receptacle can be installed as shown for countertop installations Do not install receptacle above the top of the warming drawer cutout 15 SNOLLOMLISNI NOLIVTIVISNI INSTALLATION INSTRUCTIONS 16 Installation Instructions INSTALLING CABINET SUPPORT 2 x 4 or equivalent runners e 22 a 27 gt IMPORTANT When installed below a single or double oven check to be sure that any oven supports above the cutout do not obstruct the 231 2 required depth of the warming drawer
5. be located within reach of the drawer s 56 long power cord Locate the receptacle in an adjacent cabinet within 42 of the right side or within 16 of the left side or Arecessed receptacle may be located on the right side of the cutout 7 maximum from the back of the cabinet In this location the excess power cord should be coiled and taped to the right side of the unit PRE INSTALLATION CHECKLIST A When preparing warming drawer cabinet make sure the inside of the cabinet and the warming drawer do not interfere with each other see sections on preparing cabinet REMOVE PACKAGING MATERIALS Failure to remove packaging materials could result in damage to the appliance Remove all packing 49 80507 6 a4 7 Recessed receptacle 7 max from rear on right side Drill 12 2 hole for power cord for left or right side outlet location IMPORTANT Please read carefully The power cord of this appliance is equipped with a 3 prong grounding plug that mates with a standard 3 prong grounding wall receptacle to minimize the possibility of electric shock The customer should have the wall receptacle and circuit checked by a qualified electrician to make sure the receptacle is properly grounded and has the correct polarity e Where a standard 2 prong wall receptacle is encountered it is the personal responsibility and obligation of the customer to have it replaced with a properly grounded
6. surfaces near the opening and crevices around the warming drawer door Do not heat unopened food containers Pressure could build up and the container could burst causing an injury Do not use aluminum foil to line the warming drawer bottom Foil can trap heat or melt resulting in damage to the product and a shock or fire hazard Avoid scratching or impacting glass doors or control panels Doing so may lead to glass breakage Do not cook on a product with broken glass Shock fire or cuts may occur The purpose of the warming drawer is to hold hot cooked foods at serving temperature greater than 140 F Bacteria will grow in food while it is below 140 F Therefore always start with hot food cold food cannot be heated or cooked in the warming drawer SAVE THESE INSTRUCTIONS 49 80507 6 A WARNING KEEP FLAMMABLE MATERIALS AWAY FROM THE WARMING DRAWER Failure to do so may result in fire or personal injury Do not store or use flammable materials in or near Do not let cooking grease or other flammable a warming drawer including paper plastic pot materials accumulate in or near the warming holders linens wall coverings curtains drapes and drawer Grease in the warming drawer or near gasoline or other flammable vapors and liquids the warming drawer may ignite m Never wear loose fitting or hanging garments while using the appliance These garments may ignite if they contact hot surfaces causing severe burns
7. the right side of the unit Make sure the cord does not get trapped by the drawer NOTE Insure that the power cord does not contact the hot surfaces on the bottom of ovens cooktops or any other appliance 2 Push the drawer back until the front flange is 4 Drill pilot holes through the holes in the flush to the cabinet front overlapping frame one on each corner 3 Open the drawer fully 5 Drive wood screws provided into each corner 49 80507 6 SNOLLOMILISNI NOLIVTIVISNI 18 Notes 49 80507 6 Notes 49 80507 6 19 20 Troubleshooting tips Before you call for service Save time and money Review the charts on the following pages first and you may not need to call for service Problem Possible Cause What To Do Warming drawer will A fuse in your home may be blown or the Replace the fuse or reset the circuit breaker not work circuit breaker tripped Controls improperly set See the Using the warming drawer section Drawer does not slide Ball bearings out of alignment Fully extend the drawer and push it all the smoothly or drags way in See the Care and cleaning section Drawer over loaded or load unbalanced Reduce weight to less than 50 pounds Redistribute drawer contents Excessive Liquid in warming drawer Remove liquid condensation Uncovered foods Cover food with lid or aluminum foil Temperature setting too high Reduce temperature setting Incorrect Moisture Selector setting Se
8. 3 prong wall receptacle Do not under any circumstances cut or remove the third ground prong from the power cord DO NOT USE AN EXTENSION CORD OR ADAPTER PLUG WITH THIS APPLIANCE FOLLOW NATIONAL ELECTRICAL CODES AND ORDINANCES parts from warming drawer including lifting up the warming drawer to confirm all packaging is removed Remove Installation Instructions from literature pack and read them carefully before you begin Be sure to place all literature Owner s Manual Installations etc in a safe place for future reference SNOLLOMLISNI NOLIVTIVILSNI 13 INSTALLATION INSTRUCTIONS Installation Instructions PREPARING CABINET BELOW A COUNTERTOP Install 2x4 or 2x2 anti tip block against rear cabinet wall 9 from floor to bottom of block Electrical outlet flush with side of cabinet 7 max Electrica outlet 16 max from left side ias 231 2 Min ad Electrical outlet 42 max from right side TETE ooo a 11 2 Cabinet top Install a solid barrier below a cooktop see Note Dimension A 27 Drawer 30 Drawer NOTE When installing the warming drawer below a cooktop a solid barrier must be installed at least 1 from the lowest point of the bottom of cooktop burner box to the top of cutout Use any Install a solid barrier and a 1 4 min air gap above warming ACAUTION 14 d IN CANADA THIS DRAWER IS NOT a APPROVED FOR INSTALLATION UNDER A COOKTO
9. A WARNING N THE EVENT OF A FIRE TAKE THE FOLLOWING STEPS TO PREVENT INJ URY AND FIRE SPREADING m Do not use water on grease fires Never pick up m If there is a fire in the warming drawer smother a flaming pan the fire by closing the warming drawer door and turning the warming drawer off or by using a multi purpose dry chemical or foam type fire extinguisher WARMING DRAWER SAFETY INSTRUCTIONS m Stand away from the warming drawer when m Place warming drawer racks in desired location opening the warming drawer door Hot air or while warming drawer is cool If rack must be steam which escapes can cause burns to hands moved while warming drawer is hot do not face and or eyes let pot holder contact hot heating element in m Keep the warming drawer vent unobstructed warming drawer m Keep the warming drawer free from grease m Do not leave items such as paper cooking buildup Grease in the warming drawer may ignite utensils or food in the warming drawer when not in use Items stored in a warming drawer can ignite SAVE THESE INSTRUCTIONS 49 80507 6 NOLIWARIOANI ALIS o S 52 Oc 2 f Q S TS a Oc coy oO xe E 53 o 6 oe ro oo oc Ys os c oO Bo O O 3 pae O 5 0 oo ae 2 g 2 0 Ns Thank You for your purchase of a GE Brand appliance For customers in the United States Register Your Appliance Register your new appliance on line at your convenience www geappliances com s
10. P e When installed the front face of the warming drawer will be nearly flush with cabinetry doors or drawer fronts e Drawer overlaps will conceal cut edges on all sides of the opening The rough opening for the drawer must be Depth 231 2 minimum from inside back to front of cabinet frame Width 251 2 for 27 wide models 281 2 for 30 wide models Height 91 4 5 minimum above floor or 1 above toekick 231 4 from floor to bottom of cutout is recommended for under countertop installation solid material such as 1 4 thick plywood Allow at least 1 4 air gap between the barrier and the top of the warming drawer See label on top of the wa rming drawer for approved cooktop models Installation below a cabinet drawer The warming drawer may be installed beneath a cabinet drawer In this installation a solid barrier should be installed above the warming drawer to block access Use any solid material such as 1 4 thick plywood Allow at least 1 4 air gap between the barrier and the top of the warming drawer Observe the 5 min above the floor or 1 above the toekick min installation height NOTE If you are installing in frameless cabinets it may be necessary to install 1 2 wide cleats to accept drawer mounting screws See drawer to find exact locations of mounting screws When installed under a cooktop Warming drawers are suitable for installation below
11. WER Operating Tips Operating Tips Rack m Rack will fit from front to back m Preheat with the rack in place m Using the rack allows for double stacking of items When Using The Warming Drawer Do not line the warming drawer with aluminum foil m Allow time for the drawer to be preheated LOW 8 minutes MED 15 minutes HIGH 20 minutes NOTE It is not necessary to preheat the drawer for proofing Food in heat safe glass and glass ceramic pans may need higher thermostat setting as compared to food in metal pans m Repeated opening of the drawer allows the hot air to escape and the food to cool Allow extra time for temperature inside the drawer to stabilize after adding items To Warm Serving Bowl And Plates To warm serving bowls and plates set the control on LOW mu Use only heat safe dishes Double stacking items with the rack in position m With large loads it may be necessary to use a higher thermostat setting and cover some of the cooked food items m Food should be kept hot in its cooking container or transferred to a heat safe serving dish m Aluminum foil may be used to cover food to prevent it from drying out A CAUTION a Plastic containers or plastic wrap will melt if in direct contact with the drawer Melted plastic may not be removable and is not covered under your warranty m Remove serving spoons etc before placing containers in warming drawer m When holding hot cooked foods and wa
12. anty gives you specific legal rights and you may also have other rights which vary from state to state To know what your legal rights are consult your local or state consumer affairs office or your state s Attorney General Warrantor General Electric Company Louisville KY 40225 49 80507 6 Thank You for your purchase of a GE Brand appliance For customers in Canada All warranty service provided by our Factory Service Centres or an authorized Customer Care technician For service call 1 800 361 3400 Please have serial number and model number available when calling for service Mabe Electric Warming Drawer Warranty For one year from the date of the original purchase Any part of the warming drawer which fails due to a defect in materials or workmanship During this limited one year warranty Mabe will also provide free of charge all labor and in home service to replace the defective part What GE will not cover m Service trips to your home to teach you how to use the product m Improper installation delivery or maintenance a Failure of the product if it is abused misused modified or used for other than the intended purpose or used commercially Replacement of house fuses or resetting of circuit breakers m Damage to the product caused by accident fire floods or acts of God EXCLUSION OF IMPLIED WARRANTIES Damage to finish such as surface rust tarnish or small blemishes not reported within 48 h
13. ave parts or accessories sent directly to their homes VISA MasterCard and Discover cards are accepted Order on line today 24 hours every day or by phone at 800 626 2002 during normal business hours Instructions contained in this manual cover procedures to be performed by any user Other servicing generally should be referred to qualified service personnel Caution must be exercised since improper servicing may cause unsafe operation Accessories Looking For Something More Real Life Design Studio GE supports the Universal Design concept of products services and environments that can be used by people of all ages sizes and capabilities We recognize the need to design for a wide range of physical and mental abilities and impairments For details of GE s Universal Design applications including kitchen design ideas for people with disabilities check out our Website today For the hearing impaired please call 800 TDD GEAC 800 833 4322 Contact Us If you are not satisfied with the service you receive from GE contact us on our Website with all the details including your phone number or write to General Manager Customer Relations GE Appliances Appliance Park Louisville KY 40225 GE offers a variety of accessories to improve your cooking and maintenance experiences To place an order visit us online at www GEApplianceParts com U S or www GEAppliances ca Canada or call 800 626 2002 U S 800 661 1616 Canada
14. ectric GEAppliances com Safety Information 2 Warranty 4 Assistance Accessories 6 Using The Warming Drawer Features operi eeeiondeeawed cashes ta 7 Operating TipS ce eee iasa 8 Care and Cleaning Cleaning The Warming Drawer 11 Installation Instructions 12 Troubleshooting Tips 20 Write the model and serial numbers here Model Serial You can find them on a label located on the backside of the lower drawer front In Canada contact us at www GEAppliances ca Owner s Manual amp Installation Instructions CW9000 P 7000 PW9000 49 80507 6 01 15 GE IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING Read all safety instructions before using the product Failure to follow these instructions may result in fire electrical shock serious injury or death A WARNING IMPORTANT SAFETY NOTICE All warming drawers can tip and injury could result if not properly installed To prevent accidental tipping of the warming drawer attach it to the wall with an anti tip brace as described in the Installation Instructions A WARNING GENERAL SAFETY INSTRUCTIONS m Use this appliance only for its intended purpose m Do not touch the heating elements or the interior as described in this Owner s Manual Be sure your appliance is properly installed and grounded by a qualified installer in accordance with the
15. ervice_and_support register Timely product registration will allow for enhanced communication and prompt service under the terms of your warranty should the need arise You may also mail in the pre printed registration card included in the packing material GE Electric Warming Drawer Warranty GEAppliances com All warranty service is provided by our Factory Service Centers or an authorized Customer Care technician To schedule service on line visit us at www geappliances com service_and_support or call 800 GE CARES 800 432 2737 Please have serial number and model number available when calling for service Servicing your appliance may require the use of the onboard data port for diagnostics This gives a GE factory service technician the ability to quickly diagnose any issues with your appliance and helps GE improve its products by providing GE with information on your appliance If you do not want your appliance data to be sent to GE please advise your technician not to submit the data to GE at the time of service For the period of one year from the date of the original purchase GE will provide any part of the cooktop which fails due to a defect in materials or workmanship During this limited one year warranty GE will also provide free of charge all labor and in home service to replace the defective part What GE will not cover m Service trips to your home to teach you how to use ma Damage to finish such as surface rust tarn
16. ing the highest setting on the bottom of the drawer Food Type Setting Selector Setting and items needing less heat on the rack HIGH OPEN Bread hard rolls OPEN Fried foods HIGH OPEN E Tips m Leave food uncovered m Do not use plastic containers or plastic wrap m Preheat prior to use according to recommended times 49 80507 6 sdij bunesedO AMW ONIARIVIV IHL ONISN USING THE WARMING DRAWER Operating Tips 10 Operating Tips Temperature Selection Chart for Moist Foods To keep several different foods hot set the temperature to the food needing the highest setting Place the items needing the highest setting on the bottom of the drawer and items needing less heat on the rack Control Moisture Food Type Setting Selector Setting Beef medium and well done MED CLOSED Cooked cereal Fish seafood e f o oray cream saes meo aoso ham f o omw f o MED MED MED MED Pancakes waffles HIGH a USDA FSIS recommends an internal temperature of 145 F as the minimum doneness for beef Use a portable meat thermometer to check internal temperatures Tips Cover food with lid or aluminum foil Do not put water in the warming drawer Do not use plastic containers or plastic wrap Preheat prior to use according to recommended times 49 80507 6 Cleaning The Warming Drawer Be sure the controls are in the OFF position and all surfaces are cool before cleaning any part of the warming drawe
17. ish or the product small blemishes not reported within 48 hours of m Improper installation delivery or maintenance delivery a Failure of the product if it is abused misused a Incidental or consequential damage caused by modified or used for other than the intended purpose possible defects with this appliance or used commercially Damage caused after delivery m Replacement of house fuses or resetting of circuit Product not accessible to provide required service breakers m Service to repair or replace light bulbs except for m Damage to the product caused by accident fire LED lamps floods or acts of God EXCLUSION OF IMPLIED WARRANTIES Your sole and exclusive remedy is product repair as provided in this Limited Warranty Any implied warranties including the implied warranties of merchantability or fitness for a particular purpose are limited to one year or the shortest period allowed by law This warranty is extended to the original purchaser and any succeeding owner for products purchased for home use within the USA If the product is located in an area where service by a GE Authorized Servicer is not available you may be responsible for a trip charge or you may be required to bring the product to an Authorized GE Service location for service In Alaska the warranty excludes the cost of shipping or service calls to your home Some states do not allow the exclusion or limitation of incidental or consequential damages This warr
18. only certain specified cooktop models See the label attached to the top of the warming drawer for suitable models A solid barrier and air gap between cooktop and warming drawer is required See Note above 49 80507 6 Installation Instructions PREPARING CABINET BELOW WALL OVENS INSTALLATION BELOW A SINGLE OVEN 231 2 Min 2x2 or 2x4 anti tip block against rear wall 9 from 2 floor to bottom i H of block ios a ii ACAUTION IN CANADA THE WALL OVEN IS ONLY APPROVED FOR Vy INSTALLATION WITH A BOTTOM he CUTOUT AT A MINIMUM OF 1 Min above toekick or 32 5 FROM THE FLOOR adjust to oven installation height INSTALLATION BELOW A DOUBLE OVEN 2x2 or 2x4 anti gt tip block against rear wall 9 from floor to bottom of block 1 Min above toekick e When installed the front face of the warming drawer will be nearly flush with cabinetry doors or drawer fronts e Drawer overlaps will conceal cut edges on all sides of the opening The rough opening for the drawer must be Depth 231 2 minimum from inside back to front of cabinet frame Width 251 2 for 27 wide models 281 2 for 30 wide models Height 91 4 Allow 2 minimum between oven and drawer cutouts for clearance of overlaps 49 80507 6 Allow 5 8 overlap on all sides NOTE Additional clearance between cutouts may be required
19. ours of delivery Incidental or consequential damage caused by possible defects with this appliance Damage caused after delivery Product not accessible to provide required service Service to repair or replace light bulbs except for LED lamps Your sole and exclusive remedy is product repair as provided in this Limited Warranty Any implied warranties including the implied warranties of merchantability or fitness for a particular purpose are limited to one year or the shortest period allowed by law Warrantor Is Not Responsible For Consequential Damages Warrantor Mabe Canada Inc 49 80507 6 Q o D n D D Q D a e e o D n D 5 9 D Q D s gt D o 5 lt aseyoind jeulBll0 y Jo JOOlqd Asay zd1 9 1 UNOA ajdeys ASSISTANCE ACCESSORIES Have a question or need assistance with your appliance Try the GE Appliances Website www geappliances com service_and_support 24 hours a day any day of the year For greater convenience and faster service you can now download Owner s Manuals order parts or even schedule service on line Schedule Service Expert GE repair service is only one step away from your door Get on line and schedule your service at www geappliances com service_and_support Or call 800 GE CARES 800 432 2737 during normal business hours Parts and Accessories Individuals qualified to service their own appliances can h
20. provided installation instructions Do not attempt to repair replace or clean any part of your warming drawer unless it is specifically recommended in this manual All other servicing should be transferred to a qualified technician Before performing any service disconnect the power supply at the household distribution panel by removing the fuse or switching off the circuit breaker Do not leave children alone children should not be left alone or unattended in an area where an appliance is in use They should never be allowed to climb sit or stand on any part of the appliance ACAUTION Do not store items of interest to children in cabinets above a warming drawer children climbing on the warming drawer to reach items could be seriously injured Use only dry pot holders moist or damp pot holders on hot surfaces may result in burns from steam Do not let pot holders touch hot heating elements Do not use a towel or other bulky cloth in place of pot holders Never use your appliance for warming or heating the room surface of the warming drawer These surfaces may be hot enough to burn even though they are dark in color During and after use do not touch or let clothing or other flammable materials contact any interior area of the warming drawer allow sufficient time for cooling first Other surfaces of the appliance may become hot enough to cause burns Potentially hot surfaces include the warming drawer vent opening
21. r Painted Or Enameled Surfaces Use soap and warm water to thoroughly clean Rack Clean the rack with detergent and water After cleaning rinse the rack with clean water and dry with a clean cloth ONINVAD ANV RIVO Stainless Steel Do not use a steel wool pad it will scratch the surface To inquire about purchasing cleaning products including To clean the stainless steel surface use warm sudsy stainless steel appliance cleaner or polish read the water or a stainless steel cleaner or polish Always wipe Assistance and Accessories sections at the beginning of the surface in the direction of the grain Follow cleaner this manual instructions for cleaning the stainless steel surface Control Knob The control knob may be removed for easier cleaning The knob can be cleaned in a dishwasher or it may also Make sure the knob is in the PROOF position and pull it be washed with soap and water Make sure the inside of straight off the stem for cleaning the knob is dry before replacing Replace the knob in the PROOF position to ensure proper placement JemMeiq Bulle yL Buiueap 49 80507 6 1 il INSTALLATION INSTRUCTIONS Installation Warming Drawer Instructions BEFORE YOU BEGIN Read these instructions completely and carefully gt IMPO RTANT Save these instructions for local inspector s use IMPO RTANT observe all governing codes and ordinances e Note to Installer Be sure to leave these instructions wi
22. rming empty serving dishes at the same time place the serving dishes on the high rack position and the food on the m Place the empty dishes on the rack to raise them off the bottom of the drawer If you want hotter dishes or want to heat fine china please check with the manufacturer of the dishes for their maximum heat tolerance Preheat empty serving dish while preheating the drawer bottom of the drawer A CAUTION Dishes may be hot Use pot holders or mitts when removing hot dishes 49 80507 6 Operating Tips To Proof Yeast Bread Dough Yeast dough can be proofed in the warming drawer m Place your dish on the warming drawer bottom You must always turn the control knob to LOW then immediately back to PROOF m Close the vent m Lightly oil the top of the dough in a bowl large enough to double the dough size Cover with a cloth m Preheating not required for proofing m Check the dough height in 40 minutes Add time as needed The dough should remain in the drawer until it has doubled in size and a slight depression remains when the surface is touched gently with a finger To Crisp Stale Items m Place food in low sided dishes or pans m Check crispness after 45 minutes Add time as needed m Preheat on LOW setting and open the vent Temperature Selection Chart for Crisp Foods To keep several different foods hot set the temperature to the food needing the highest setting Place the items Control Moisture need
23. t the Moisture Selector to the open vent setting to allow venting No heat in the PROOF Room temperature may prevent the Turn the knob to LOW then back to PROOF setting thermostat from tripping on Food dries out Moisture escaping Cover food with lid or aluminum foil 49 80507 6
24. th the Consumer Note to Consumer Keep these instructions for future reference Product failure due to improper installation is not covered under the Warranty AWARNING This appliance must be properly grounded AWARNING Insure that the power cord does not contact the hot surfaces on the bottom of ovens cooktops or any other appliance e ATTENTION INSTALLER Proper installation is the responsibility of the installer and product failure due to improper installation is NOT covered under warranty PKD915 PTD915 CW9000 PJ 7000 and PW9000 MATERIALS YOU WILL NEED 2 x 4 or 2 x 2 lumber for runners and brace ah Wood screws and adhesive or other hardware for installing runners or shelf to support warmer drawer Runners must be level rigidly mounted and capable of supporting 150 pounds TOOLS REQUIRED Hand Saw Pe WZ Safety Glasses Drill and Measuring Tape 1 16 Bit cre Level Phillips Screwdriver E gt Cut Resistant Gloves 49 80507 6 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS GROUNDING THE APPLIANCE IMPORTANT Please read carefully FOR PERSONAL SAFETY THIS APPLIANCE MUST BE PROPERLY GROUNDED This warming drawer must be supplied with 120V 60Hz and connected to an individual properly grounded branch circuit and protected by a 15 or 20 amp circuit breaker or time delay fuse Rating plate A properly grounded 3 prong receptacle should
Download Pdf Manuals
Related Search