Vinotemp VT-WINEDISP4SS Use and Care Manual
Contents
1. A PROUD HERITAGE OF EXPERIENCE amp QUALITY 8 9 P 4 BOTTLE WINE DISPENSER DISPENSER amp PRESERVER VT WINEDISP4SS OW NER S MANUAL YOUR WINE DISPENSER This wine dispenser can be used for storage and or service The unit has a glass door and a soft interior light to elegantly display your wine SERVING WINES Storing wines at the proper temperature is important To preserve them as long as possible wine should be stored at approximately 55 Fahrenheit However the chart below suggests the optimal drinking temperature for the different styles of wine C F Wine Style 19 66 Armagnac Brandy Cognac 79 48 Vintage Sparking 46 General Operating I nstructions Remove all external and internal packaging from your wine dispenser Be sure that all parts have been included before discarding any packaging materials You may want to keep the box and packing materials for use at a later date Upon receipt and inspection of unit the supply cord must be replaced if it is damaged Contact our customer service at 1 800 777 8466 or info vinotemp com Let the unit rest UNPLUGGED for 24 hours once you have placed in your home e Please fully read the instruction manual e Save these instructions Please read and follow all safety rules and operating instructions before using To r2. 2014 Vinotemp International All rights reserved
3. it will light up when power is on Check for power at the outlet and fuse Check the wirings and connections at the power switch and power board a Wine tube leak b Spout loose c Empty bottle No power to the outlet Incorrect and loose wirings Unit running high temperature or continually Temperature is too high Temperature is too low Compressor running but not cooling Noisy operation 17621 South Susana Road Improper door seal Ambient temperature is too high Improper condenser air flow Refrigeration system problems Temperature setting is too high Displayed temperature is correct but inside temperature is high Temperature sensor is faulty Unit is iced Power board 15 faulty Display Control board is faulty Poor evaporator air flow Faulty evaporator fan Refrigerant leakage Refrigeration system restricted Installation area not firm Screws nuts and metal parts may be loose Fan blade is hitting other parts Fan is faulty Compressor is faulty Check the door opening and gasket Check the installation location Check the fan and clearance Call customer service Lower temperature setting Temperature sensor is touching the cold panel Insert the sensor in a cup of iced water to see if it displays 32 Unplug unit to defrost Change the power board Change display control board Check for any restrictions Check to see if the fan is turning Call ser
4. between 45 and 65 NSF approved plastic components sanitary stainless steel spouts and electronic valves keep wines clean and prevent any drips from spouts Easily dispense the perfect glass of wine at any time with just the touch of a button temperature display temperature setting temperature amp portion setting wine dispensing wine dispensing amp button cleaning button top panel ight switch amp stainless steel SN 7 portion calibration spout face panel anti UV door Bottle Capacity ff a 16 35 x 17 45 x 24 55 Note Argon and Nitrogen gas cartridges gas weight of approximately 14 grams are not included Suitable standard gas cartridges are non refillable and have a threaded neck size 1 gt 20 and minimum length of 13mm The cartridge must have a diameter not exceeding 45mm and a length not to exceed 140mm 17621 South Susana Road Rancho Dominguez California 90221 info vinotemp com INSTALLATION INSTRUCTIONS BEFORE USING YOUR UNIT e Remove all packing material before using your wine dispenser Check to be sure the appliance is in good condition Use a soft dry cloth to wipe down the outside of the wine dispenser thoroughly e Before connecting your wine dispenser to the power source let the unit stand upright for 24 hours This will reduce the possibility of a malfunction in the cooling system from handling during transportation LOCATING YOUR UNIT e This wine preserver disp
5. horizontally positioned at an angle more than 45 or turned upside down Place the appliance on a solid level surface Allow for proper clearance on all sides of the unit Designed for freestanding installation only The wine dispenser is an electrical appliance To avoid injury or death from electrical shock do not operate the unit with wet hands while standing on a wet surface or while standing in water Allow the unit to stand upright for 24 hours prior to initially plugging it in This unit is designed for indoor household use only Any other use will void the warranty WARNING Risk of child entrapment and suffocation Before you throw away this or any old unit take off the door Leave the shelves in place so that children may not easily climb inside WARNING Gas cartridge contents under pressure Do not puncture or incinerate Keep away from heat and out of direct sunlight Keep away from sharp objects that could puncture chamber Do not store in an enclosed vehicle Do not discharge towards face or body KEEP OUT OF REACH OF CHILDREN 17621 South Susana Road Rancho Dominguez California 90221 iInfo vinotemp com ELECTRICAL CONNECTION A WARNING ELECTRIC SHOCK HAZARD Disconnect electric supply from appliance before servicing Replace all panels before operating Failure to do so could result in death or electrical shock To avoid the risk of electrical shock property damage personal injury or death The power c
6. LESHOOTING Dispensing System Possible Causes One canister only Canister gasket unaligned bad a Align change or install the gasket dispensing 1 or 2 or missing bottles gas Canister not tightened Turn the canister clockwise all the way leaking escaping Gas tube broken Change the gas tube Gas tube not tightened at the Check for these connections regulator or valve Regulator leak Check for gas escaping at the regulator Gas valve stuck open If gas continues to escape from the gas tube check for gas valve and wirings Bottle not tightened Check the plug fixer Unit not Argon Nitrogen leak If none of the spouts dispense wine dispensing check for canister pressure gauge or turn the canister slightly counter clockwise to see if any gas escapes turn clockwise to re tighten then check for gas leaking as instructed above Defective pressure regulator If none of the spouts dispense wine the canister has pressurized gas check the regulator Bottle neck not tightened or Press dispense button to check if gas is defective plug escaping from the plug or fixer Defective gas solenoid valve or Press the dispense button to see if gas is incorrect wiring escaping out of the gas tube Defective wine solenoid valve Switch the questionable valve to a or incorrect wiring working spout and check to see if problem still exists Incorrect or loose wirings Check all wirings and connections defective power board
7. air estimation of damages for it would be impracticable or extremely difficult to fix the actual damages Should these charges remain unpaid for 30 calendar days from the billing date your unpaid invoice will be forwarded to a collections firm and will be reported to consumer credit reporting agencies until paid The above terms and conditions are the only ones governing this transaction and Seller makes no oral representations of any kind These Terms and Conditions can only be modified in writing signed by both Purchaser and Seller SERVICE IMPORTANT Upon receipt and inspection of unit the supply cord must be replaced if it is damaged Contact our customer service at 1 800 777 8466 or info vinotemp com The manufacturer has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice WARNING Please do not place the unit within reach of children For adult use only Contact Iinfo vinotemp com with any questions or visit www vinotemp com 3049078 CONFORMS TO UL STD 250 CERTIFIED TO CSA STD C22 2 No 63 93 17621 S Susana Road Rancho Dominguez CA 90221 www vinotemp com Vinotemp 15 a registered trademark of Vinotemp International All products features and services are Subject to change without notice We cannot guarantee the accuracy of the contents of this document We disclaim liability for errors omissions or future changes
8. cabinetry for a period of 12 twelve months For Designer Series units parts and labor for a period of 12 twelve months from date of sale compressor parts 5 years Thermoelectric Units 90 ninety days including Wine Coolers Beer Dispensers Humidor Portofino Wood Cellars and Refrigerators Wine Mate Split and Ducted Systems and other installed products and parts only for 1 year no labor Other Wine Mate Cooling Systems are 5 years parts 1 year labor Wine Accessories Racking Systems and Other items are not warranted There is no warranty on parts purchased separately If a purchaser claims a product is defective they must obtain a letter from a qualified refrigeration technician at the customers cost to verify that the unit was installed properly with proper ventilation and the unit is truly malfunctioning due to manufacture defect Removal or re installation of unit is not included in warranted costs Purchaser s exclusive remedy is limited at Seller s option to repair or replace defective part s with either new or reconditioned part s Purchaser is responsible for shipping the unit pre paid to designated facility and Seller will pay return shipping charges in the continental United States for items repaired under warranty within 12 twelve months from date of sale Since the natural variation in texture density grain color tone and shade of wood is unavoidable Seller does not guarantee the texture color tone or shad
9. e of the wood nor does seller guarantee the colorfastness of wood or against peeling chipping cracking or scratching Note Unfinished wood is subject to warping all wood surfaces must be sealed before placing cellar into service Improper repair or placement of the unit will void the warranty Any third party repair facility must be pre approved in writing by Seller before providing replacement parts under warranty IL Romanzo units Warranty 90 ninety days Replacement part 12 twelve months from the date of sale Non New Units Scratch amp Dent Refurbished Floor Models warranty for compressor units is 90 days from your dated invoice and 30 days for thermoelectric units parts for function only not cosmetic defects These units are refurbished and sold as is Purchaser assumes risks to the quality and performance of goods and assumes the costs of all necessary service or repair not covered herein Element Grills via Element Products LLC grills have a 1 year parts warranty and a thirty day limited parts warranty on grill accessories Warranty period is from the date of sale not from shipping nor delivery This Limited Warranty does not cover damage due to such things as accident misuse abuse mishandling neglect acts of God fires earthquakes floods high winds government war riot or labor trouble strikes lockouts delay of carrier unauthorized repair or any other cause beyond the control of the Seller whether similar or d
10. egister your product visit http www vinotemp com Warranty aspx Register your warranty within 10 days of receiving the unit Please be sure to retain your proof of purchase 17621 South Susana Road Rancho Dominguez California 90221 info vinotemp com TABLE CONTENTS IMPORTANT SAFELY INSTRUCTIONS cscwrororssuasaormanneraaweranunacemanuenaaweamsareenan 5 ELECTRICAL CONME CRON na bens 6 PARTS AND SPECITICATIONS 7 8 OPERATING YOUR WINE DISPENSER 8 AND MAINTENANCE 10 CLRCULT DIAGRAM TEA 11 PROBLEMS YOUR WINE DISPENSER 12 TERMS OF SALE AND WARRANTY aes 14 SERVICES MIPOR TANT NOVICE 16 IMPORTANT SAFETY INSTRUCTIONS Read and follow all instructions before use Do not operate this or any other appliance with a damaged cord Always unplug the app
11. enser is designed for freestanding installation only recommended that this unit be kept a location with an ambient temperature range of 45 F 90 F Not intended for garage or basement installation e Place your wine dispenser on a solid level surface other than carpet This will ensure vibration and noise free operation Use the adjustable legs to ensure that the unit 15 level Leave a5 inch clearance on all sides of the unit This is to ensure proper air circulation OPERATING YOUR WINE DISPENSER LOADING amp UNLOADING ARGON NITROGEN INERT GAS BOTTLE Press and hold the wine dispensing button to empty remaining gas the cartridge Unplug the unit Rotate the cover upwards to access the gas cartridge Pull the cartridge out of the unit and turn it counter clockwise to loosen Place a new cartridge and align it to the neck thread of the regulator To properly position the cartridge rotate once clockwise and once aligned continue to turn clockwise to tighten 6 Push the cartridge back into the dispenser and close the cover Note It is normal that a little gas escapes when the gas cartridge Is being tightened to the regulator open cover pull out ATTACHING 8 REMOVING WINE BOTTLES 1 Unscrew lower part of bottle fix nut and place it on the neck of desired wine boitle 2 Slide bottle upward with gas and wine tube inside the bottle 3 Fi
12. es resulting from the carrier s inability to safely and or adequately use the building elevator to lift the goods Any claim for damages incurred during shipment by the carrier of the goods are insured and handled directly with the carrier and must be noted at time of delivery Any damages due to manufacture defects will be handled directly with Seller subject to the Limited Warranty below If the item is damaged by the freight company Purchaser may cancel the order only by paying for freight costs both ways and a 35 restocking fee All sales are final and unless authorized in writing by the Seller Purchaser not return the goods under any circumstance Purchaser refuses to accept the goods under any circumstance the Purchaser is liable for the return and cost of freight both ways and if Seller does take back the goods there will be a restocking service fee that is 35 of the purchase price of the goods product must be in original packaging If Purchaser returns goods claiming that the goods are defective and goods are found to be in working condition by the Seller Purchaser is liable for the return and cost of freight both ways plus restocking service fee that is 35 of the purchase price of the goods Built to Order products including Cabinets Racking and Accessories are non returnable Purchaser must notify Seller of non conforming goods within four days of delivery after which time all goods are deemed accepted If an o
13. issimilar to the foregoing Seller is not responsible for any damages caused to Purchaser s property resulting from the goods This limited warranty applies only inside the Continental US Alaska Puerto Rico Hawaii and other territories countries are not warranted Purchaser understands and acknowledges that the goods sold here are wine cellars cigar humidors and or other similar units which house wine or cigars or other items Purchaser assumes all risk of using these units including risk of spoilage humidity variations temperature variations leaks fire water damage mold mildew dryness and similar and any other perils that might occur Seller is not responsible for incidental or consequential damages and there are no warranties expressed or implied which extend beyond the Limited Warranty described above Warranty and liability are non transferable The implied warranties of merchantability and of fitness for a particular purpose are hereby expressly disclaimed Some states do not allow the exclusion of incidental or consequential damages or a waiver of the implied warranties of fitness and or merchantability so the above limitations may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Seller disclaims any indemnification for claims of infringement of any intellectual property of protectable nature In the event of any dispute between Seller and Purchaser ari
14. liance before performing any care or maintenance Exercise caution and use reasonable supervision when appliance is used near children Never allow children to operate play with or crawl inside the appliance Keep packing materials away from children Do not clean the appliance with flammable fluids Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance The flumes can create a fire hazard or explosion To clean only use mild detergents or glass cleaning products Do not use solvent based cleaning agents or abrasives Do not operate with housing panels removed or damaged When disposing of refrigerated appliances special handling is required It is the consumer s responsibility to comply with federal and local regulations when disposing of this product Do not attempt to repair or replace any part of your appliance unless it is specifically recommended this manual All other servicing should be referred to a qualified technician Locate the unit away from direct sunlight and sources of heat stove heater radiator etc Do not use this appliance for anything other than its intended purpose Do not store food in the cooler Do not place any other appliance on top of the unit For adult use only Do not lift or carry the wine dispenser by the cord Do not plug in to the power socket before setup is complete When positioning or if moving the appliance ensure that it is not set
15. n control settings in 1 02 increments until you reach your desired setting Calibrating the portion lf the amount of wine dispensed varies additional calibration may be used to correct the dispensed portion of wine To calibrate the portion control setting press and hold the 9 button until the display shows H3 and the previously set portion control amount begins to flash Using the Yor 4 buttons you can increase or decrease the portion control settings if necessary Once you have checked the portion control setting press the to dispense wine and verify the amount poured Note You may need to repeat this procedure several times until the correct portion is dispensed 17621 South Susana Road Rancho Dominguez California 90221 iInfo vinotemp com SETTING THE TEMPERATURE The temperature display will show the current temperature inside the unit To set a temperature press and hold the 4 button till the display shows 1 and the displayed temperature starts to flash Once the temperature display starts to flash use the buttons to select your desired temperature For your wine to stay fresh up to 45 days wine bottles must be closed and the unit preservation system must be properly sealed to prevent deterioration Keep wine at proper temperature in unit LED Light _ The LED light can be switched or by pressing the CARE AND MAINTENANCE IMPORTANT Always unplug
16. or control board Dispensing Argon Nitrogen low If all spouts are dispensing wine slowly interrupted or slow check the gas pressure and install a new canister if necessary Gas tubes kinked or twisted Press dispensing button to see if gas is escaping out of the gas tube slowly Bottle neck not tightened Check the bottle plug and fixer for escaping gas Gas solenoid valve restricted Remove bottle press dispensing button to see if gas is escaping out of the gas Wine solenoid valve restricted tube Switch the to a working spout to check Wine spurting or Wine tube is restricted Check for any restrictions spitting Bottle is near empty and there Change the empty wine bottle out for a full is too much gas in the boitle one Gas pressure 15 too high Replace the pressure regulator Wine solenoid valve is dirty Clean solenoid valves Dispensing System a Check for debris if constant dripping use warm water to flush the system b Spout loose Push the spout to tighten if there is intermittent dripping Wine dripping a Solenoid valve seal leak Check the wine tube Push the spout to tighten Change the empty bottle out for a full bottle Wine divided a Clean out debris Too many bubbles Argon Nitrogen pressure is too Replace the pressure regulator high Cooling system Power cord unplugged a Check the power cord Power switch off Turn the switch
17. ord must be plugged into 3 prong grounding type wall receptacle GROUNDING TYPE grounded in accordance with the National WALL RECEPTACLE Electrical Code ANSI NFPA 70 latest edition and local codes and ordinances It is the personal responsibility of the consumer to have the proper 3 prong wall receptacle installed by a qualified electrician e DO NOT UNDER ANY CIRCUMSTANCE REMOVE THE POWER CORD GROUNDING PRONG e A separate adequately fused and grounded circuit should be available for this appliance Do not remove any grounding wires from individual components wile servicing unless the component is to be removed and POWER SUPPLY CORD replaced It is extremely important to WITH 3 PRONG replace all grounding wires when GROUNDING PLUG components are replaced e DO NOT USE A GROUND FAULT INTERRUPTER GFI e A DEDICATED 15 AMP CIRCUIT IS HIGHLY RECOMMENDED Electrical Cord We strongly recommend against the use of an extension cord However if you still elect to use an extension cord it is necessary that it be a properly rated UL listed 3 wire grounding type appliance extension cord with a 3 blade grounding plug and a 3 slot receptacle PARTS AND SPECIFICATIONS This refrigerated wine dispenser displays stores and dispenses 4 opened wine bottles keeping them fresh from oxidation for up to 45 days Wines can be maintained at a chosen storage and serving temperature
18. rder has been placed and production has started cancellation of your order will be a 15 charge If Purchaser tenders payment with a check that has insufficient funds NSF or stops payment on a check or credit card for any reason Purchaser agrees to pay for all costs associated with the Seller s collection or litigation of such a claim including without limitation general and special damages court costs and attorneys fees Finance charges begin the date of invoice Collection fees plus NSF fee of 50 will be added to your invoice which you agree to promptly pay Title to the goods does not pass until payment is received in full by Seller and Seller retains a security interest in the goods until they are paid for in full however from deliver Purchaser will insure the goods and for any damages caused by the goods eighteen percent 18 annual rate Purchaser assumes and must immediately pay any credit card arbitration fees which the credit card companies charge during a dispute Any disputes not resolved within 30 days from the invoice date will be reported to credit reporting agencies LIMITED WARRANTY Seller warrants that the goods will be free of defects in materials and workmanship as follows Furniture style wood wine cabinets made in the U S all cooling unit parts for a period of 5 five years cabinetry and labor uninstalled for a period of 12 twelve months Metal cabinet wine units parts and labor for cooling system and
19. sing out of or relating to these terms and conditions or to the goods sold generally Purchaser must first file a written claim with Seller within ten days of the occurrence giving rise to the claim and wait an additional thirty days for a response before initiating any legal action The sale and all terms are subject to California law Any legal proceeding arising out of or relating to these terms and conditions or to the goods sold Purchaser shall bring solely and exclusively in the County of Los Angeles no event may Purchaser initiate any legal proceeding more than six months after the occurrence of the event giving rise to the dispute Seller may make non payment claims until debt is paid in full HONEST FEEDBACK In an effort to ensure fair and honest public feedback and to prevent the publishing of libelous content any form your acceptance of this sales contract prohibits you from taking any action that negatively impacts Seller its reputation products services management or employees unless you have first communicated with Seller your statement claim has been substantiated or validated by a judgment Should you not follow this process Seller in its sole discretion will provide you a seventy two 72 hour opportunity to retract the content in question If the content remains whole or part you will immediately be billed US 2 500 as liquidated damages representing a f
20. t bottle mouth into silicon plug If bottle mouth is larger lift upper part of bottle fix nut to free silicon plug completely and ease bottle mouth into the silicon plug first 4 Tighten lower part of bottle fix nut to the upper part 5 Press the dispensing button to allow wine out check to see if gas leakage will occur Reconnect tighter if needed so gas does not escape 6 Place wine fully in refrigerated cabinet and close door POWER SWITCH BUTTLE FIX NUT PRESSURE GAUGE SILICON PLUG GAS TUBE WINE TUBE WINE Once the wine dispenser is positioned and plugged in turn the power on OO D OD DISPENSING WINE The wine dispenser features two sets of two dispensing buttons each positioned directly above its corresponding wine bottle spout The two dispensing button options are Press and hold button over the desired spout to begin dispensing wine into your glass Wine will continue to be dispensed until the button is released gt Press the 2 button to dispense wine 102 increments Press it once to dispense 102 twice to dispense 202 and so forth Resetting the 1 oz portion control setting The 1 preset portion control setting can be reset by the user To set the portion control press and hold the y outton until the display shows H2 and the previously set portion amount begins to flash Using the 4 2 7 you can increase decrease the portio
21. vice technician to check for loss of refrigerant Call service technician to check for restrictions Make sure unit is level and on flat solid surface Check to see if the noise is coming from the fan mount compressor mount or loose tubing Check the blade clearance Check to see if the fan blade is broken or if the motor is making noise Call customer service Rancho Dominguez California 90221 13 info vinotemp com TERMS OF SALE AND WARRANTY Vinotemp International Corp Seller and the person or entity that acquires these goods from Seller Purchaser hereby fully agrees to the following terms and conditions of the sale Shipping fees are the responsibility of the Purchaser whether freight prepaid or freight collect Seller assumes no responsibility for the goods sold to the Purchaser once the goods have left the Seller s premises including but not limited to late delivery by the carrier or for events caused by any difficulty carrier incurs in attempting to fit the goods into the Purchaser s designated location due to the size of the goods or any other reason Purchaser assumes all responsibility for delivery payment of freight access measurement installation hook up wiring moving and storage of the goods The transportation of all goods is subject to the terms and conditions which the Carrier imposes on Purchaser including but not limited to additional charges imposed per flight of stairs and or additional charg
22. your wine dispenser before cleaning or performing maintenance Never use harsh cleansers or scouring pads to clean any part of the wine dispenser CLEANING To clean the stopper dispenser and solenoid valve 1 Fill a bottle with clean warm water and place the stopper dispenser onto the bottle 2 Press and hold the button to begin dispensing the warm water start the automatic cleaning setting press the portion button 5 times and then hold until the display begins to flash and shows CL 4 Continue to dispense and flush the system until dry argon comes from the spout CIRCUIT DIAGRAM Wine Dispensing E Dispensing Wine Dispensing Switch H7 fixer ine bottle Wine solenoid F a spout B valve B Safety valve Wine tube Gas valve B Wine bottle Gas valve T Gas tube Nine bottle A Gas regulator ine spout Gas cartridge F le to CECODOL 17621 South Susana Road Rancho Dominguez California 90221 1 11 PROBLEMS WITH YOUR WINE DISPENSER Most common problems can be solved easily saving you the cost of a possible service call Try the suggestions below to solve the problem before contacting Vinotemp at info vinotemp com TROUB
Download Pdf Manuals
Related Search