Vinotemp VT-CAVE150 SD Use and Care Manual
Contents
1. A PROUD HERITAGE OF EXPERIENCE amp QUALITY WINE CELLAR VINOCELLIER SMALL AND LARGE MODELS Owner S Manual WWW VINOTEMP COM YOUR WINE CELLAR This unit can be used for Storage and or Service The unit has a glass door and soft interior light that you can leave on to elegantly display your wine SERVING WINES Storing wines at the proper temperature is important To preserve them as long as possible wine should be stored at approximately 55 Fahrenheit However the chart below suggests the optimal drinking temperature for the different styles of wine F Wine Style 66 Armagnac Brandy Cognac Full Bodied Red wines Shiraz Tawny Port Medium Bodied Red Wines Amontillado Sherry Light Bodied Red Wines Full Bodied White Wines Medium Bodied White Wines Ros Light Bodied White Wines Vintage Sparkling Fino Sherry 7 Non Vintage Sparkling E 8 a 17621 South Susana Road Rancho Dominguez California 90221 info vinotemp com General Operating Instructions Remove all packaging and labels from your wine cellar Be sure that all parts have been included before discarding any packaging materials You may want to keep the box and packing materials for use at a later date Upon receipt of unit and inspection the supply cord must be replaced if it is damaged Contact our customer service at 1 800 777 8466 e Let the unit rest UNPLUGGED for 24 hours once you have it placed in your home2. SMALL MODEL Cooling System R134a RA 0 17621 South Susana Road Rancho Dominguez California 90221 info vinotemp com IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance basic precautions should be followed to reduce the risk of fire electric shock and personal injury 1 Use this appliance only as described in this manual Other users are not recommended as it may cause fire electric shock or personal injury 2 This product is intended for household and commercial use 3 To protect against electric shock do not immerse unit plug or cord in water or other liquids Keep away from children Unplug from the outlet when not in use when moving from one location to another or before cleaning 6 To disconnect the appliance grip the plug and pull it from the wall outlet Never pull by the cord 7 Do not operate the appliance in the presence of explosive and or flammable fumes 8 Do not place the appliance or any of its parts near an open flame cooking or other heating appliance 9 Do not operate the appliance with a damaged cord or plug If the product malfunctions or if it is dropped or damaged in any manner do not use 10 The use of attachments is not recommended and may be hazardous 11 Place the unit on a dry level surface 12 Unit is not designed for use in a garage or basement 13 Do not operate if the housing is removed or damaged 14 A loose fit between the AC outlet receptacle an
3. Seller and the person or entity that acquires these goods from Seller Purchaser hereby fully agree to the following terms and conditions of the sale Shipping fees are the responsibility of the Purchaser whether freight prepaid or freight collect Seller assumes no responsibility for the goods sold to the Purchaser once the goods have left the Seller s premises including but not limited to late delivery by the moving carrier or for events caused by any difficulty carrier incurs in attempting to fit the goods into the Purchaser s place of business or residence due to the size of the goods or otherwise Purchaser assumes all responsibility for delivery payment of freight access measurement installation hook up wiring moving and storage of the goods The transportation of all goods is subject to the terms and conditions which the moving carrier imposes on Purchaser including but not limited to additional charges imposed per flight of stairs and or additional charges resulting from the carrier s inability to safely and or adequately use the building elevator to lift the goods to an upper floor Any claim for damages incurred during shipment by the carrier of the goods are insured and handled directly with the carrier and must be noted at time of delivery Any damages due to manufacture defects will be handled directly with Vinotemp International subject to the limited warranty All sales are final and unless authorized in writing b
4. black metal grill fastened to the back of your wine cabinet 2 Completely clean the inside of your wine cabinet once a year taking care to ensure that you have unplugged and unloaded it use water and a non caustic cleaning product and make sure to rinse well Hygrometry You cabinet is equipped with an exclusive ARTEVINO system enabling the creation inside your wine cabinet of the correct humidity level required to perfectly seal the corks in your bottles On installation it is important to pour the equivalent of a small glass of water on the floor of the cabinet to start up the heat dynamic pump process Thereafter it is important to add water from time to time The long life of your wine cabinet depends on regular monitoring especially of anything that may appear abnormal and informing us of any anomalies found nay Saving Tips Install your cabinet in an appropriate place and within the recommended temperature range e Keep the door open for as short a time as possible e Ensure that the door seal is in good condition and not damaged If it is damaged contact your Vinotemp dealer 17621 South Susana Road Rancho Dominguez California 90221 infoQOvinotemp com 12 TROUBLESHOOTING Vibrations e Check to make sure the wine cellar is on a level surface The door will The wine cellar is not on a level surface not close The racks are out of position properly A bottle is too long Unit has no Check the wall outle
5. amp IMPORTANT NOTICE Upon receipt of unit and inspection the supply cord must be replaced if it is damaged Contact our customer service at 1 800 777 8466 The Manufacturer has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice WARNING Please do not place the unit within reach of children For adult use only Contact info vinotemp com with any questions or visit www vinotemp com WwWwWwW VINOTEMP COM Unotemp 17621 S Susana Road Rancho Dominguez CA 90221 www vinotemp com Vinotemp is a registered trademark of Vinotemp International All products features services and information in this document are subject to change without notice We cannot guarantee the accuracy of the contents of this document We disclaim liability for errors omissions or future changes 2011 Vinotemp International All rights reserved
6. to receive the pre cut cards delivered with your cabinet helping you to identify the position of your favorite wines at a glance Storage Shelf configuration e Install the shelf in the selected location e Place a wooden locking pin in each of the two holes located on the right and left of the upper face approximately 15 cm in front of the shelf these pins butt up against the heat shaped wall and avoid all accidental shelf movement See diagram e Start by placing the bottles in the rear recesses with the base of the bottle towards the back e Continue by placing the bottles in the front recesses facing them in the opposite direction e Continue stacking the bottles in this way making sure that no bottle touches the rear wall A storage shelf can hold a maximum of 6 layers each of 13 bottles this representing 78 Standard Bordeaux bottles 100kg Presentation shelf configuration e Install the shelf in the selected location e Place a wooden locking pin in each of the two holes located on the right and left of the upper face approximately 15cm in front of the shelf these pins butt up against the heat shaped wall and avoid all accidental shelf movement See diagram e Start by placing the bottles in the rear recesses with the base of the bottles towards the back 6 Standard Bordeaux bottles e Continue stacking the bottles on the rear recesses 7 6 7 6 26 Standard Bordeaux bottles making sure that no bottle touches t
7. all cooling unit parts for a period of 5 five years cabinetry and labor uninstalled for a period of 12 twelve months from date of sale For the metal cabinet wine units parts and labor for cooling system and cabinetry for a period of 12 twelve months from date of sale Thermoelectric Units 90 ninety days from the date of sale including Wine Coolers Beer Dispensers Humidor Portofino Wood Cellars and Refrigerators Wine Mate Split Systems and installed products are parts only for 1 year no labor Other Wine Mate Cooling Systems are 5 years parts 1 year labor Wine Accessories and Racking Systems are not warranted For a scratch and dent refurbished unit warranty is 3 months from your dated invoice parts for function only not cosmetic There is no warranty on parts purchased separately Removal and re installation of unit is not included in warranted labor Purchaser s exclusive remedy is limited at Seller s option to repair or replace defective part s with either new or factory reconditioned part s Purchaser is responsible for shipping the unit pre paid to designated facility and Seller will pay return shipping charges in the continental United States for items repaired under warranty within 12 twelve months from date of sale Since the natural variation in texture density grain color tone and shade of wood is unavoidable Seller does not guarantee the texture color tone or shade of the wood nor does seller guarantee the co
8. bove The implied warranties of merchantability and of fitness for a particular purpose are hereby expressly disclaimed Some states do not allow the exclusion of incidental or consequential damages or a waiver of the implied warranties of fitness and or merchantability so the above limitations may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state In the event of any dispute between Seller and Purchaser arising out of or relating to these terms and conditions or to the goods sold generally Purchaser must first file a written claim with Seller within ten days of the occurrence giving rise to the claim and wait an additional thirty days for a response before initiating any legal action The sale and all terms are subject to California law Any legal proceeding arising out of or relating to these terms and conditions or to the goods sold generally shall be brought solely and exclusively in the County of Los Angeles In no event may Purchaser initiate any legal proceeding more than six months after the occurrence of the event giving rise to the dispute The above terms and conditions are the only ones governing this transaction and Seller makes no oral representations of any kind These Terms and Conditions can only be modified in writing signed by both Purchaser and Seller 10 10 17621 South Susana Road Rancho Dominguez California 90221 infoQOvinotemp com 14 SERVICE
9. d plug may cause overheating and a distortion of the plug Contact a qualified electrician to replace loose or worn outlet 15 This appliance is designed to be built in fully recessed or free standing 16 The wine cellar is intended for use in a controlled ambient location such that the ambient temperature does not exceed 90 F 32 C 17 Locate the unit away from direct sunlight and sources of heat stove heater dishwasher refrigerator radiator etc ole IMPORTANT Any work carried out on the cooling unit must be done by a professional refrigerator technician who must check the circuit for leaks before switching the appliance back on Likewise any work carried out on the electrical circuit must be done by a qualified technician WARNING To reduce the risk of fire electric shock or personal injury unplug or disconnect the appliance from the power supply before servicing CORD INSTRUCTIONS A For your protection this unit is equipped with a 3 conductor cord set that has a molded 3 prong grounding oo type plug and should be used in combination with a de Broan Conducir properly connected grounding type outlet as shown in figure A Not for use with an extension cord ve a Grounding Prong www V I N O T E M P COM INSTALLATION INSTRUCTIONS 1 Carefully remove all of the packaging around your wine cabinet 2 Place your wine cellar on a solid flat surface that is strong enough to Support the unit when f
10. ds again the controller Will come back to its original position e For transport purposes cabinets may ship with the electronic controller in hidden position 17621 South Susana Road Rancho Dominguez California 90221 10 info vinotemp com TEMPERATURE CONTROL During operation the value displayed on the control panel when the keys are not being pressed is always the temperature inside the cabinet Temperature Adjustment Order Process 1 If you want to increase both the upper and lower settings it is essential that you adjust the upper setting first SET2 then the lower setting SET1 2 When you want to lower both settings lower and upper it is essential that you adjust the lower setting SET1 first then the upper setting SETZ2 The temperature inside the cabinet can be selected by adjusting the two thermostat values in the following way Adjusting the upper set temperature SET2 1 Press the SET2 button for a second to display the upper set point code 2 Then click on Probe Prog button to display the upper set point value 3 Increase the value with by pressing the button with the DOWN arrow SET1 or decrease it by pressing the button with the UP arrow SET2 4 Hold down the Probe Prog button to confirm the new value Adjusting the lower set temperature SET1 Press the button for a second and repeat the procedure described above NOTE The cabinet is delivered with the set points
11. e Please fully read the instruction manual Please read and follow all safety rules and operating instructions before using WwWwWwW VINOTEMP COM TABLE OF CONTENTS RAR TS AND SPECIFICATION Sarien 5 IMPORTANT SABE ANSTRUCTION Sta Aa 7 CORD INS RU GLO NS teu rrr eee e 7 INSTALLATION INSTRUCTIONS 00 O E VE be KE 8 LAYOUT AND LOADING RECOMMENDATIONS si i NSiy Ek nab D R KAD Wa SE N ii 9 SECURITY LOCK suk ai kek saa arm Sa kak Aba De A An Aa 10 ELECTRONIC CONTROLLER DISPLAY TY o sis san ku akan ake eza hi AWAN A WE daa Wad ka AA Waa tam Wak WA 10 TEMPERATURE CONTROL rara 11 TEMPERATURE ALARM oi A io 11 CLEANING AND CARE sas A 12 EVERYDAY CABINET CARE TI Saco 12 TROUBLESHOOTING vais anio A 13 TERMS OF SALE AND WARRANTY as 14 SERVICE SC IMPORTANT NOTICE s AAA 15 17621 South Susana Road Rancho Dominguez California 90221 info vinotemp com PARTS AND SPECIFICATIONS El a El 1 Cabinet Body 2 Hinge 3 Door 4 Universal shelf storage and or presentation configuration 5 Hygrometry 6 Lock 7 Thermodynamic pump opening 8 Rigidity Bar not present on all models 9 Universal shelf sliding configuration 10 Adjustable foot 4 11 Wire shelf not present on all models 12 Storage tray 13 Temperature display position may vary for glass door models 14 Temperature adjustments WwWwWwW VINOTEMP COM LARGE MODEL Approx 267 71 25 x 26 8 x 26 8 RBA 0 R134a
12. he rear wall e To present the bottles place them in an upright position on the front of the shelf Maximum capacity 6 Traditional Bordeaux bottles In presentation configuration a shelf can hold a maximum of 38 Traditional Bordeaux bottles Sliding shelf configuration e Install the shelf in the selected location e Place a wooden locking pin in each of the two holes located on the right and left of the upper face approximately 4cm to the rear of the shelf when the shelf is slid forward these pins stop it from sliding completely out of the cabinet See diagram e Start by placing the bottles in the rear recesses with the base of the bottles towards the back e Continue by placing the bottles in the front recesses facing them in the opposite direction A sliding shelf can only hold one layer of bottles maximum of 13 Traditional Bordeaux bottles In order to enjoy optimum accessibility when setting up the cabinet in a mixed layout we recommend that shelves to be used as sliding shelves are located in the middle section of the cabinet WWwW VINOTEMP CO SECURITY LOCK As a security measure the lock on your wine cellar works on a double movement system The key should be pushed inward and turned at the same time to operate For Glass Door Cabinets Only e If you push upwards on the electronic controller it will be hidden in the ceiling of the cabinet and display will not be visible e If you push upwar
13. lorfastness of wood or against peeling chipping cracking or scratching Note Unfinished wood is subject to warping all wood surfaces must be sealed before placing cellar into service Improper placement of the unit will void the warranty By Vinotemp in writing any third party repair facility must be pre approved before providing parts free of charge This limited warranty does not cover damage due to such things as accident misuse abuse mishandling neglect acts of God fires earthquakes floods high winds government war riot or labor trouble strikes lockouts delay of carrier unauthorized repair or any other cause beyond the control of the Seller whether similar or dissimilar to the foregoing Seller is not responsible for any damages caused to Purchaser s property resulting from the good This limited warranty applies only inside the Continental US Alaska Puerto Rico and Hawaii are not warranted Purchaser understands and acknowledges that the goods sold here are wine cellars cigar humidors and or other similar units which house wine or cigars Purchaser assumes all risk of using these units including risk of spoilage humidity variations temperature variations leaks fire water damage mold mildew dryness and similar and any other perils that might occur Seller is not responsible for incidental or consequential damages and there are no warranties expressed or implied which extend beyond the Limited Warranty described a
14. pre programmed at 53 6 F for the upper set point SET2 and at 51 8 F for the lower set point SET1 These parameters were set for optimal everyday use of the cabinet Recommended temperature range setting is between 50 F and 57 F TEMPERATURE ALARM Two types of alarms can appear on the setting display e HI indicates that the temperature inside the cabinet is too high e LO indicates that the temperature is too low Both alarms mean that the cabinet is malfunctioning The alarm signal automatically disappears once the temperature returns to normal Important You will need to wait approximately 48 hours before you notice the effects of the temperature change WwWwWwW VINOTEMP COM CLEANING AND CARE e Always unplug the wine cellar before cleaning e Do not use benzene scrubbing brushes or chemical cleaners as these will damage the unit Use only a mild nonabrasive cleanser to clean the exterior of the cabinet e Clean the stainless steel door and handle by wiping with a warm water and baking soda solution The solution should be about 2 tablespoons of baking soda to a quart of water e Wash the racks with a mild detergent solution e Always dry all the parts with a clean dry cloth before plugging the wine cellar back into the receptacle EVERYDAY CABINET CARE TIPS The following few operations enable you to obtain optimum operation and an extended life cycle 1 Regularly remove dust twice a year from the condenser
15. t for power Make sure the outlet is not controlled by power a wall switch The inside e Make sure the cooling vents are not obstructed temperature e The room may be too hot If the ambient temperature is 90 F or higher the unit can have difficulty chilling adequately does not seem e When using the unit for the first time it can take up to 24 hours to reach correct the desired temperature e It may not be plugged into the wall socket e Make sure the wall socket is functional by testing another electrical appliance in the power socket The unit does not operate e Allow at least 24 hours for the internal temperature to adjust e If the room temperature is above 90 F the unit can have difficulty cooling Humidity does not affect the cooling ability of the unit e To achieve accurate temperature control the unit should not be used of operated in any of the following locations o In a sunny place Power is ON o In a room with poor air circulation such as a garage closet near but the unit another heat producing appliance such as a dishwasher oven or gt HL refrigerator will not cool With an outlet shared with a refrigerator as the refrigerator will drain power from the wine cellar o Ina cabinet or closet e Make sure the cooling vents are not obstructed e Ifthe lower compartment does not cool check if the fan on the middle board is not running WWwW VINOTEMP CO TERMS OF SALE AND WARRANTY Vinotemp International
16. ully loaded 3 Allow a minimum 4 inch space between the wall and the back of the cabinet 4 Open the door and make sure all components are intact 5 Release the cord and plug the power cord into a standard electrical outlet Aligning Your Wine Cellar In order for you to level off your cabinet as easily as possible it is equipped with 4 adjustable feet However we recommend that you tighten the back feet to the maximum and use the front feet to create a level Important Placement Notes o Select a well ventilated area for best performance o This wine cellar is designed to be free standing only and operated indoors Do not place the unit in a moist location or near a heat source including other major appliances or direct sunlight Do not plug unit into the same outlet as a refrigerator or microwave Do not place heavy objects on top of the unit Important WAIT 48 HOURS BEFORE PLUGGING IN THE CABINET Should you need to move your cabinet never tilt it more than 45 and always tilt sideways on the side that the electrical cable comes out right hand side when looking at the cabinet 17621 South Susana Road Rancho Dominguez California 90221 info vinotemp com LAYOUT AND LOADING RECOMMENDATIONS Each shelf can be used as a storage presentation or sliding shelf Each of your wine cabinet s shelves has 13 recesses for bottles enabling you to place your bottles in total safety Also all shelves have a label slot designed
17. y the Seller Purchaser may not return the goods under any circumstance If Purchaser refuses to accept the goods under any circumstance the Purchaser is liable for the return and cost of freight both ways and if Seller does take back the goods there will be a restocking charge that is 35 of the purchase price of the goods Product must be in original packaging Built to Order products including Cabinets Racking and Accessories are non returnable Purchaser must notify Seller of non conforming goods within four days of delivery after which time all goods are deemed accepted If an order has been placed and production has started cancellation of your order will be a 15 charge If Purchaser tenders payment with a check that has insufficient funds NSF or stops payment on a check or credit card for any reason Purchaser agrees to pay for all costs associated with the Seller s collection or litigation of such a claim including without limitation extra damages court costs and attorneys fees Finance charges begin the date of invoice Collection fees plus NSF fee of 50 will be added to your invoice which you agree to promptly pay Title to the goods does not pass until payment is received in full by Seller and Seller retains a security interest in the goods until they are paid for in full LIMITED WARRANTY Seller warrants that the goods will be free of defects in materials and workmanship as follows Furniture style wood wine cabinets
Download Pdf Manuals
Related Search