Home

Frigidaire FGDS3065PF Use and Care Manual

1. Burner caps Recessed areas Burner head Figure 13 Placing burner caps correctly Do not place flammable items such as plastic salt and pepper shakers spoon holders or plastic wrappings on the cooktop when it is in use These items could melt or ignite Potholders towels or wooden spoons could catch fire if placed too close to the range cooktop Do not place aluminum foil or any material that can melt on the range cooktop If these items melt they may perma nently damage the cooktop surface md IMPORTANT e Do not cook with the surface control knob left in the LITE position The electronic ignitor will continue to spark if the control knob setting remains in the LITE position e When setting any surface control knob to the LITE position all electronic surface ignitors will spark at the same time However only the surface burner you are setting will ignite e Never place or straddle a cooking utensil over two different surface cooking areas at the same time This can cause uneven heating results e Inthe event of an electrical power outage the surface burners can be lit manually Use caution when lighting surface burners manually To light a surface burner hold a lit match to the burner head then slowly turn the surface control knob to LITE After burner lights push in and turn knob to desired setting BEFORE SETTING OVEN CONTROLS Oven vent location The oven vent is located in the rear of the cookto
2. Make sure the oven and oven racks are completely cool when trying to assemble or disassemble the Effortless Oven Rack system Never pick up hot oven racks or parts self clean 27 1 steam clean bake delay time start 13 A 19 quick probe preheat timer on off set clock o0 o Gallery Model above Professional Model below 10 11 steam self clean ciean delay bake start O me set timer Oclock O on off o0 of Steam Clean Use for steam clean function for quick cleaning of oven Self Clean Use to select self clean function Delay Start Use to program a delayed time bake or delayed self cleaning cycle start time Bake Time Use to enter the length of baking time Set Clock Use along with the numeric keypad to set the time of day Timer on off Use to set or cancel the timer Timer does not start or stop the cooking process Oven Light Use to turn the oven light on and off Oven Lockout Use to lock the oven door and the control panel Bake Use to select the bake cooking feature Broil Use to select broil cooking feature Convect Use to select between convection bake convection roast and convection broil some models 16 conv keep convert Obake convect broil AR my powerplus Ocon slow Eie P Na preheat bake broilgconvect warm start 12 13 14 15 16 17 18 19 20 OVEN CON
3. The oven will turn on and begin heating Press and hold both the bake time and delay start keys for at least 3 seconds SAb will appear in the display Once SAb appears in the display the oven control will no longer beep or display any further changes and the oven is properly set for the Sabbath feature 6 The oven may be turned off at any time by first pressing off this will turn the oven off only OVEN CONTROLS 7 To turn off the Sabbath feature press and hold both the bake time and delay start keys for at least 3 seconds SAb will disappear from the display amp NOTE e You may change the oven temperature once baking has started by pressing bake and the numeric keys for the new temperature For example to change from 350 F to 425 F press 4 2 5 Then press start twice e Only the following controls will function after setting the Sabbath feature numeric keypad bake start and off All other features will not function once the Sabbath feature is properly activated e The display will not show temperature changes or sound any audible tones when the oven is set with the Sabbath feature A CAUTION Food Poisoning Hazard Do not let food sit for more than one hour before or after cooking Doing so can result in food poisoning or sickness Foods that can easily spoil such as milk eggs fish meat or poultry should be chilled in the refrigerator first Even when chilled they should not stand in the oven for
4. To stop cooking at any time press off Slow cook can be changed between Hi and Lo settings by pressing slow cook to toggle between the two settings Press start to activate the new setting OVEN CONTROLS Setting Warm Keep Warm Warm keep warm is best for keeping oven baked foods warm for serving after cooking has finished The warm keep warm key turns on the feature and will maintain an oven temperature of 170 F 77 C This feature will keep oven baked foods warm for serving up to 3 hours after cooking After 3 hours the warm keep warm feature will turn the oven off The feature may be used without any other cooking operations or can be set to turn on automatically after a bake time or delay start Warm keep warm tips e Always start with hot food Do not use the warm keep warm feature to heat cold food e Food in heat safe glass and glass ceramic containers may need higher temperature settings compared to food in regular containers e Avoid repeated openings of the oven it will allow hot air to escape and the food to cool e Aluminum foil may be used to cover food to increase moisture content To set warm keep warm 1 Arrange interior oven racks and place food in oven 2 Press warm keep warm HLd will appear in the display 3 Press start If start is not touched within 25 seconds the request to turn on the feature will be canceled 4 To turn off warm keep warm feature at any time press off
5. 1 Press and hold S for 3 seconds 2 After 3 seconds door Loc will appear a tone will sound and the word DOOR and the lock icon will flash in the display until the oven door has completely unlocked Do not attempt to open the oven door while the door is unlocking This could harm the motor door latch 3 The oven is now fully operational Oven Light The oven is equipped with two oven lights The oven lights will turn on automatically when the oven door is opened The oven light may be turned on when the door is closed by using the oven light key on the control panel The light will stay off until the door unlocks amp NOTE The oven light will not operate during the self clean function To toggle the oven lights on and off 1 Press Q 2 The interior oven lights are covered with a glass shield The glass shield must be in place whenever the oven is in use To change the interior oven lights see Replacing the oven light on page 41 22 Setting Preheat The powerplus preheat quick preheat feature is used when a recipe calls for preheating the oven When the preheat stage ends a tone will sound indicating when to place the food in the oven Preheat can be programmed for temperatures between 170 F to 550 F and is not necessary when roasting or cooking casseroles For batter and dough based goods such as cakes pastries and breads use the regular bake or convection function for best results To set the
6. Bacon hi Biscuits lo Casseroles med Empty Dinner plates lo Fish Seafood med Hamburgers hi Pancakes Waffles med Pastries Pies Rolls hard lo Pizza Potatoes baked hi Poultry hi Roasts Beef Pork med OVEN CONTROLS Arranging Warmer Drawer Rack Positions The warmer drawer rack can be set in two positions to accommodate foods and any items that need to be warmed or kept warm The rack must be placed in the vertical position in one of two ways In the upright position Figure 36 to allow low profile food items to be placed both under and on top of the rack for example rolls or biscuits on top of the rack and a casserole dish under Upright Position Figure 36 Warmer drawer rack set upright In the downward position Figure 37 to allow the placement of light weight food items and empty dish ware for example rolls or pastries and dinner plates Downward Position Figure 37 Warmer drawer rack in down position 33 OVEN CONTROLS Restoring Factory Default Setting Your appliance is programmed with default control settings Over time users may make changes to these settings The following options have settings that can be modified and may have been changed since the appliance was new e 12 or 24 hour display mode e Continuous bake or 6 hour energy savings mode e Silent or audible control e Oven temperature display F or C e Oven temperature adjustments offsets e Stored recipes e Cancel
7. Press start The actual internal oven temperature will be displayed 5 A beep will sound once the oven temperature reaches 375 F and the display will show 375 6 When the oven is preheated place food in oven amp NOTE Once the oven has reached the set temperature the oven will cycle on and off to maintain a consistent set tempera ture During preheat and when oven is heating to maintain the set temperature the bake element indicator will appear in the oven icon on some models or the bake element indicator light will be lit on some models Pressing off at any time will stop the feature To change the bake temperature example changing from 375 F to 425 F 1 After the oven has already been set to bake at 375 F and the oven temperature needs to be changed to 425 F press bake The display will show 375 Press 4 2 5 using the numeric keys Press start The change is accepted and the oven temperature will increase to the new set temperature When the oven temperature rises to the new set temperature of 425 the control will beep OVEN CONTROLS Baking Tips For best bake results Figure 22 Rack positions Fully preheat the oven before baking items like cookies cakes biscuits and breads When using any single rack position the rack so that the food is in the center of the oven For best results when baking cakes using two oven racks place racks in positions 2 and 4 See Figure 22 W
8. please visit the web at www star k org The Sabbath feature may only be used with the bake function Once the oven is properly set using bake with the Sabbath feature active the oven will remain on until cancelled The Sabbath feature overrides the factory preset 6 hour energy saving feature If the oven light is needed during the Sabbath press Oven light before activating the Sabbath feature Once the oven light is turned on and the Sabbath feature is active the oven light will remain on until the Sabbath feature is turned off If the oven light needs to be off be sure to turn the oven light off before activating the Sabbath feature md IMPORTANT It is advised to not activate any cooking function other than bake while the Sabbath feature is active To program the oven to begin baking immediately and activate the Sabbath feature example baking at 350 F 1 Be sure that the clock is set with the correct time of day 2 Place the food in the oven Press bake 350 appears in the display Press start The actual oven temperature appears in the display 3 If you desire to set the oven control for a bake time or delayed bake time do so at this time If not skip this step and continue to Step 5 For delay start or bake time instructions see page 24 Remember the oven will turn off after using bake time or delay start and may only be used once during the Sabbath Jewish holidays The maximum bake time is 5 hours and 59 minutes
9. temperature must be done when the oven is inactive The probe is not required to be connected to the probe recep tacle when setting this option OVEN CONTROLS To set the oven to continue cooking after reaching the target temperature 1 Press probe key and hold for 6 seconds 2 Press self clean key and toggle until Continu appears as shown in Figure 33 then press start to accept GZ DE ap Luin iu Figure 33 Probe set to continue cooking To set the oven to automatically stop cooking and start warm once reaching target temperature 1 Press probe key and hold for 6 seconds 2 Press the self clean key and toggle until CAnCEL appears as shown in Figure 34 then press start to accept Figure 34 Probe set to cancel cooking Probe too hot message When the message Prob Too Hot flashes in the display the probe temperature has exceeded 250 F 121 C If the probe is not removed this message may continue until the sensor reaches 300 F 149 C or higher and oven will automatically turn off amp NOTE During cooking the internal food temperature will display by default To see the target temperature press the probe key once After 6 seconds the display will revert to the internal food temperature To assure accuracy do not remove the probe from the food or receptacle until the desired internal temperature is reached If the probe is removed from the receptacle only the probe feature will cancel b
10. the directions described above If the 24 hour time of day mode was chosen the clock will display time from 0 00 through 23 59 hours Setting Continuous Bake or 6 Hour Energy Saving The timer on off and self clean keys control the contin uous bake or 6 hour energy saving features The oven control has a factory preset 6 Hour Energy Saving feature that shuts off the oven if the oven control is left on for more than 6 hours The oven can be programmed to override this feature for Continuous Baking To set the control for continuous bake or 6 hour energy saving 1 Press and hold timer on off for 6 seconds 2 After 6 seconds 6Hr OFF or StAY On will appear in the display and the control will beep once 3 Press self clean to switch between the 6 hour energy saving and continuous bake features 4 Press start to accept the change display will return to time of day or press off to reject the change Note 6Hr OFF indicates the control is set for the 6 hour energy saving mode StAY On indicates the control is set for the continuous bake feature Temperature Display Fahrenheit Celsius The broil and self clean keys control the Fahrenheit F or Celsius C temperature display modes The oven control can be programmed to display temperatures in F or C The oven is preset at the factory to display in F To change display from F to C or C to F 1 To tell if the display is set for F or C press broil and
11. Some foods cook faster saving time and energy Figure 24 Air circulation in convection function Setting Convection Bake This mode of cooking enables you to obtain the best results when baking with multiple pans and racks The oven can be programmed for convection baking at any temperature between 170 F to 550 F with a default temperature of 350 F To set the oven for convection bake and temperature to 375 F 1 Arrange interior oven racks 2 Press convect CONVECT and BAKE will flash and 350 will appear in the display If a convection bake of 350 F is needed press start 3 Press 3 7 5 Convect and bake will keep flashing and 375 will appear in the display 4 Press start The actual oven temperature and the fan icon will be displayed A beep will sound once the oven temperature reaches 375 F and the display will show 375 CONVECT BAKE and the fan icon 5 Place food in oven OVEN CONTROLS Convection baking tips e Fully preheat the oven before baking items like cookies cakes biscuits and breads e If your recipe cooking temperature has already been converted for convection baking there is no need to reduce your oven temperature If not you can easily reduce using the Convection Convert feature Please see Setting Convection Convert on page 26 for further instruction on temperature conversion e When using any single rack position the rack so that the food is in the center of the
12. continue cooking with meat probe option amp NOTE If you choose to restore factory default settings all of the above user preferences will be restored to their original settings factory default The oven temperature offset will reset and any stored recipes will be cleared To restore oven control to factory default settings 1 When the oven is in idle and no cooking function is in operation press and hold the 7 key until the acceptance tone sounds about 6 seconds 2 Press start The control is now reset to default settings 34 Adjusting Oven Temperature The temperature in the oven is pre set at the factory When first using the oven be sure to follow recipe times and temperatures Do not use oven thermometers such as those should in grocery stores to check the temperature settings inside the oven These thermometers may display temperatures that vary widely from the actual temperature If you think the oven is cooking too hot or too cool for the temperature you select you can adjust the actual oven temperature to be more or less than what is displayed Before adjusting test a recipe by using a temperature setting higher or lower than the recommended temperature The baking results should help you to decide how much of an adjustment is needed To adjust the oven temperature higher 1 Press bake for 6 seconds UPO 0 will appear in the display 2 To increase the temperature use the number keys to enter the desi
13. hold for 6 seconds 550 will appear broil will flash in the display and a beep will sound If F appears the display is set to show temperatures in F If C appears the display is set to show temperatures in C 2 Press self clean to switch between F or C display modes The display will show either F or C 3 Press start to accept the change or press off to reject the change Setting Control for Silent Operation The delay start and self clean keys control the silent control feature The silent control operation feature allows the oven control to be operated without sounds or beeps whenever necessary If desired the control can be programmed for silent operation and later returned to operate with the normal sounds and beeps OVEN CONTROLS To change control from normal sound operation to silent control operation 1 To set oven for normal or silent operation press and hold delay start will appear and DELAY will flash in the display After 6 seconds bEEP On or bEEP OFF will appear in the display 2 Press self clean to switch between normal sound operation and silent operation mode The display will show either bEEP On or bEEP OFF If bEEP On appears the control will operate with normal sounds and beeps If bEEP OFF appears the control is in the silent operation mode 3 Press start to accept the change or press off to reject the change amp NOTE The control will always beep at the end of a minute tim
14. inside the empty warmer drawer compartment See Figure 44 77 Left hand channel Right hand channel si Figure 46 Channel alignment 3 While holding the warmer drawer level and square using the warmer drawer handle push do not force the warmer drawer all the way into the outer compart ment glide channels all the way into the range Open the warmer drawer again to verify the glides have seated 4 Ifyou do not hear the levers click or the bearing glides do not feel seated remove the warmer drawer and repeat Steps 1 through 3 again This will minimize possible damage to the bearing glides Removing and Replacing the Oven Door A CAUTION The door is heavy For safe temporary storage lay the door flat with the inside of the door facing down To remove oven door 1 Open oven door completely horizontal with floor See Figure 47 2 Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door See Figure 48 A tool such as a small flat blade screwdriver may be required 3 Firmly grasp both sides of oven door along the door sides Do not use the oven door handle See Figure 49 4 Close the door to approximately 10 degrees from the oven door frame 5 Lift the oven door hinge arms over the roller pins located on each side of the oven frame See Figure 49 To replace oven door 1 Firmly grasp both sides of oven door along the door s
15. of 375 F 1 Arrange oven racks and place food in the oven 2 Press convect The display will show 350 and convect and bake will flash 3 Press convect again The display will show 350 and convect and roast will flash 4 Enter the desired roasting temperature using the number keys i e 3 7 5 Press start The actual oven temperature will be displayed Convect roast and the fan icon will be displayed The bake broil and convection elements will also cycle for a better heat distribution Convection roasting tips e Use a broiler pan and grid as well as a roasting rack available by mail order The broiler pan will catch grease drippings and the grid will help prevent spatters The roasting rack will hold the meat Make sure the roasting rack is securely seated on the grid in the broiler pan Do not use the broiler pan without the grid or cover the grid with aluminum foil e Pull the rack out to the stop position before removing food Position food fat side up on the roasting rack e Do not open the oven door often Doing so will reduce the temperature in the oven and may increase the cooking time necessary for best results e It s not recommended to roast chicken on a roasting rack Use a deep pan and place on rack position 1 offset rack OVEN CONTROLS Setting My Favorites Recipe some models The my favorites key allows the user to save a recipe to be recalled at any time The recipe may be for any baki
16. of the burner head Be sure both burner caps are seated firmly and rest level on the burner head before operating Check the fit for each cap using the same method for the round burner caps by gently sliding each cap from side to side Please note that the burner cap lips should not move out of recessed areas of the burner head Dual burner head some models Burner cap 5 Burner cap lip S Burner head Burner caps Recessed areas Dual burner head using two burner caps Figure 5 10 IMPORTANT Please note that the burner cap should not move off the center of the burner head when sliding from side to side e Check and be sure that all oval style some models burner caps are correctly in place on oval burner heads e Do not use the surface burners without the burner caps and burner grates properly installed Missing pieces or improper installation may lead to spills burns or damage to your range and cookware e Make sure the burner grates are properly placed on the cooktop before using the surface burners Figure 6 The grates are designed to rest inside the recess on the cooktop e To install burner grates place grates flat side down and align into the cooktop recess e Grates should rest flush against each other and against the sides of the recess Figure 6 Proper grate installation BEFORE SETTING SURFACE BURNERS Using Proper Cookware A CAUTIO
17. oven e For best results when baking cakes using two oven racks place racks in positions 2 and 4 See Figure 25 e When baking using two oven racks position cookware as shown in Figure 26 Allow at least 2 inches 5 cm of space between cookware for proper air circulation e Dark or dull bakeware absorbs more heat than shiny bakeware It may be necessary to reduce oven temper ature and cook time to prevent overbrowning of some foods Dark bakeware is recommended for pies Shiny bakeware is recommended for cakes cookies and muffins e Do not open oven door too often Doing so reduces oven temperature and may extend cooking time e Most baked goods except cakes should be baked on pans with no sides or low sides to allow air to circulate it CENE Figure 25 Rack positions Figure 26 Pan spacing amp NOTE The convection fan will start as soon as the oven is set for convection bake The display shows an icon of rotating fan within a square indicating that the convection fan is operating The bake broil and convection elements will also cycle for a better heat distribution Pressing off will stop the feature at any time 25 OVEN CONTROLS Setting Convection Convert Convection convert automatically converts a standard baking recipe for convection baking When set properly this feature is designed to display the actual converted reduced temperature in the
18. place pan to allow for 2 to 4 of air space 5 1 cm to 10 2 cm on all sides of pan e Place a marked glass measuring cup filled with water on the center of the oven rack If the water level is uneven refer to the installation instruc tions for leveling the range e Be sure to allow 2 to 4 of air space 5 1 cm to 10 2 cm on all sides of each pan in the oven e Do not use pans that are dented or warped e Set oven temperature 25 F 13 C higher than suggested and bake for the recommended time e Be sure to remove all pans from the oven except the ones to be used for baking e Open oven door only after shortest recommended baking time BEFORE YOU CALL Solutions to Common Problems Before you call for service review the following list It may save you time and expense Possible solutions are provided with the problem listed Problem Solution Poor baking results Many factors effect baking results Use proper oven rack position Center food in the oven and space pans to allow air to circulate Preheat oven to the set temperature before placing food in the oven Try adjusting the recipe s recommended temperature or baking time See Adjusting oven temperatures on page 23 if you feel the oven is too hot or cold If your oven is cooking poorly or self clean is performing badly perform the following check Press Broil Press START Place your hand near the handle on the oven door Between the door and
19. position before turning or removing food e Always use a broiler pan and its grid when broiling It keeps grease away from the high heat of the broil element e Donot use the broil pan without the insert Do not cover the broil pan insert with foil The exposed grease could catch fire If using a searing grill available by mail order preheat the grill for 5 to 10 minutes before placing your meat Broil one side until the food is browned turn and cook on the second side Season and serve e Convection broiling is generally faster than conventional broiling Check for doneness at the minimum recom mended time Setting Convection Roast This mode is best for cooking tender cuts of beef lamb pork and poultry Use this mode when cooking speed is desired Convection roasting gently browns the exterior and seals in the juices Convection roasting uses the bake element convection element broil element and fan to circulate the heat evenly and continuously within the oven The oven can be programmed for convection roasting at any temperature between 170 F to 550 F with a default temperature of 350 F A WARNING Should an oven fire occur do not open oven door turn off the oven If the fire continues throw baking soda on the fire or use a fire extinguisher Do not put water or flour on the fire Flour may be explosive and water can cause a grease fire to spread and cause personal injury To set a convection roast temperature
20. preheat temperature for 350 F 1 Arrange the interior oven racks 2 Press powerplus preheat quick preheat The display will show 350 3 Press start 350 and PREHEAT will be displayed while the oven is preheating 5 Press off when baking is complete or to cancel the preheat feature To change preheat temperature while oven is preheating ex changing from 350 F to 425 F 1 Press powerplus preheat quick preheat The display will show 350 Enter the new preheat temperature Press 4 2 5 3 Press start The display will show 425 When baking is complete press off amp NOTE e Once the oven reaches the set temperature the control beeps and the word PREHEAT turns off The bake feature will display the set oven temperature and will continue cooking at the set bake temperature e When oven is preheated place food in the oven During preheat the convection fan is active during the first rise in temperature to allow oven to reach its target temperature faster e The bake broil and convection elements will also cycle for a better heat distribution Setting Bake Bake controls normal baking If a rapid preheating is preferred refer to Setting Preheat on page 22 The oven can be programmed to bake at any temperature from 170 F to 550 F To set the bake temperature to 375 F 1 Arrange interior oven racks Press bake The display will show 350 2 3 Press 3 7 5 using the numeric keys 4
21. the control panel you should feel a rush of air on your hand If so your unit is functioning properly and you have had a Power Failure in your home If no air stream is present call a service technician to replace your cooling fan Appliance is not level Be sure floor is level strong and stable enough to adequately support range If floor is sagging or sloping contact a carpenter to correct the situation Poor installation Place oven rack in center of oven and place a level on the oven rack Adjust leveling legs at base of appliance until the rack is level Kitchen cabinet alignment may make range appear not level Be sure cabinets are square and have sufficient room for appliance clearance Cannot move appliance easily Appliance must be accessible for service Cabinets not square or are built in too tight to allow clearance for appliance Contact builder or installer to make appliance accessible Carpet interferes with appliance Provide sufficient space so appliance can be lifted over carpet Entire appliance does not work For models with a power cord make sure power cord is plugged properly into outlet If electricity to home is working check fuse box or breaker Call your local electric company for service outage information Service wiring is not complete Call 1 800 4 MY HOME for assistance Oven portion does not operate The time of day is not set The oven clock must first be set in order to operat
22. the room temperature steam clean will not start Be sure the oven is cool Remove all racks and oven accessories Scrape or wipe loose debris from the oven bottom Pour 8 oz 235 ml distilled or filtered water onto the oven bottom See Figure 38 Close the oven door Figure 38 Add 8 ounces of distilled water 4 Press steam clean StCn will show in the display See Figure 39 L ECN Figure 39 Steam clean selected 5 Press start 36 6 Steam clean is a 20 minute cycle Time remaining is shown in the display 7 An alert will sound at the end of the cycle and the End message will show in the display Press off to return to the clock 8 When the steam clean cycle is complete stand to the side of the oven out of the way of escaping vapor when opening the oven door The cycle includes a cool down period so you may immediately use a soft cloth or sponge to remove any remaining water 9 Wipe oven cavity and bottom Do not clean oven door gasket See Figure 40 Figure 40 Clean around the oven door gasket For best results clean oven immediately after the cycle is complete Steam clean works best for soils on the oven bottom Removal of especially stubborn or baked on soils may require a manual cleaning Some condensation or water vapor may appear close to the oven vent This is normal The oven gasket may become damp do not wipe dry Open door to about 10 it should stop a few
23. the way into the probe receptacle while the oven is still cool The recep tacle is located on the upper left front oven cavity wall See Figure 29 3 When the probe is set an acceptance tone will sound the probe icon will illuminate and the actual probe temperature appears in the display See Figure 32 Close the oven door Figure 32 Probe set showing probe temperature 4 Press probe key once Enter the desired target food temperature using the numeric keys and set tempera ture for food type The minimum setting is 140 F 60 C the maximum is 210 F 99 C Default is 170 F 77 C Press start to accept the target temperature Set for quick preheat bake convect bake convect roast or convect convert and if necessary adjust the oven temperature accordingly 7 The control will provide three beeps when the internal target temperature is reached The oven will automati cally change to a warm setting HLd and the actual probe temperature will alternate in the display Warm will maintain the oven temperature at 170 F 77 C for 3 hours unless otherwise cancelled To stop cooking at any time press off To set the preferred oven operation once the probe reaches the target temperature The oven is preset to automatically stop cooking and start the warm feature when probe sensor reaches the target temperature This may be set to continue cooking if desired Setting the options once the probe reaches the target
24. to be adjusted in or out in the rack position to match the length of the connector arm 17 BEFORE SETTING OVEN CONTROLS door connector bracket Figure 19 Connector arm door connection 5 While holding the connector arm in place twist the connector arm so the ends of the connector arm point upwards See Figure 20 The connector arm should now be locked into position 6 Repeat steps 4 and 5 for the other connector arm End should point up as explained in Step 5 End should point up as explained in Step 5 Figure 20 Left amp right brackets pointing up 7 Once both connector arms are properly in place be sure to test the oven rack operation by gently closing the oven door The oven rack should move in and out of the oven freely when the door is opened or closed See Figure 21 18 connector arm connector arm left and right door connector brackets with connector arm ends shown in locked position pointing upwards Figure 21 Effortless oven rack after assembly A CAUTION Remove all oven racks and accessories before starting a self clean cycle If the oven racks are left in the oven during the self clean cycle the gliding ability of the Effortless Oven Rack system will be damaged and oven racks will lose their shiny finish and may turn blue Remove all oven racks and clean according to instruc tions provided in the Care amp Cleaning section of this manual
25. with the default 12hr display mode the Delay Start for a Self Clean can only be programmed to start up to 11 hours and 59 minutes after the time showing in the display Be sure to set the time of day to the current time before programming To set a Delay Start Self Clean to begin 12 or more hours the maximum is 23 hours and 59 minutes after the time of setting the Self Clean be sure to first set the control to the 24 hour display mode To set the control for the self cleaning cycle to start at a delayed time and shut off automatically example 3 hour self clean cycle to start at 4 30 1 Be sure the clock is set with the correct time of day and the oven door is closed Press self clean CLn and 3 00 HR will show in the display The control will automatically clean for a 3 hour period If a 2 or 4 hour clean time is desired press self clean multiple times to toggle between 2 3 or 4 hours Press start door Loc will appear a beep will sound and the word DOOR and the lock icon will flash The letters CLn will remain on in the display As soon as the control is set the motor driven oven door lock will begin to close automatically Once the door has been locked the word DOOR and the lock icon indicator light will quit flashing and remain on Press delay start Enter the desired start time using the number keys 4 3 0 Press start DELAY DOOR and the A icons will remain on The control will start the self clea
26. Clock Time 12 Hr 24 Hr 1 00 Hr Min 0 00 Min 12 59 Hr Min 23 59 Hr Min Delay Start 12 Hr 24 Hr 1 00 Hr Min 0 00 Min 12 59 Hr Min 23 59 Hr Min Bake Time 12 Hr 24 Hr 0 01 Min 0 01 Min 5 59 Hr Min 5 59 Hr Min Self Clean Time 2 hours 4 hours The features listed show the minimum and maximum time or temperature settings allowable Setting the Clock The set clock key is used to set the clock The clock may be set for 12 or 24 hours display operation The clock is preset at the factory for 12 hour display When the oven is first plugged in or when the power supply to the oven has been interrupted the timer in the display will flash The clock must be set for the oven to operate To set the clock example below for 1 30 1 2 Press set clock The display will show CLO Press 1 3 0 on the keypad to set the time of day to 1 30 CLO will stay in the display Press start CLO will disappear and the clock will start 20 Setting 12 or 24 Hour Time of Day Display 1 2 3 Press and hold set clock for 6 seconds The display will show CLO Continue holding the key until 12Hr dAY or 24Hr dAY appears in the display and the control beeps once Press self clean to switch between the 12 and 24 hour time of day display The display will show either 12Hr dAY or 24Hr dAY Press start to accept the change or press off to reject the change Note If the clock need to be reset to the correct time follow
27. FRIGIDAIRE All about the Product Record and Registration Important Safety Instructions Before Setting Surface Burners Setting Surface Burners Before Setting Oven Controls www frigidaire com USA 1 800 944 9044 TABLE OF CONTENTS oy aa 2 OvenContiolSenee cisce re ede ee eee gt Here 3 Cae aA CEANN en eee ee eee ee hs a RN 9 Before a oulcall EEEE e cc ee aa a 0 13 Waitai Ee T e www frigidaire ca Canada 1 800 265 8352 ELOZ AON Y A8Y ZOSLOGBEEL PRODUCT RECORD AND REGISTRATION Need Help 0 000 c eee eee ees 2 Product Registration 0 00 eee eee 2 Product Record and Registration 2 Important Safety Instructions 00 00 ee 3 Before Setting Surface Burners 00 0000 9 Setting Surface Burners 0 00 c eee ee eee 13 Before Setting Oven Controls 000005 15 Oven Controls 0 e eee 19 Care and Cleaning 00 e eee e ee eee 40 Before You Call 22 66 ccceecs eevee eevee eee ene 44 Warranty 2 2225 scsceeeee edema ene ee eeea eens 47 Questions For toll free telephone support in the U S call 1 800 944 9044 For online support and Internet production information visit http www frigidaire com 2 2012 Electrolux Home Products Inc Thank you for choosing Frigidaire Important This Use and Care Guide is part of our commit ment to customer satisfaction and product quality throughout
28. LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE If You Need Keep your receipt delivery slip or some other appropriate payment record to establish the warranty period Service should service be required If service is performed it is in your best interest to obtain and keep all receipts Service under this warranty must be obtained by contacting Electrolux at the addresses or phone numbers below This warranty only applies in the USA and Canada In the USA your appliance is warranted by Electrolux Major Appliances North America a division of Electrolux Home Products Inc In Canada your appliance is warranted by Electrolux Canada Corp Electrolux authorizes no person to change or add to any obligations under this warranty Obligations for service and parts under this warranty must be performed by Electrolux or an authorized service company Product features or specifications as described or illustrated are subject to change without notice USA Canada 1 800 944 9044 1 800 265 8352 Electrolux Home Products Inc 2 Electrolux Electrolux Canada Corp 10200 David Taylor Drive 5855 Terry Fox Way Charlotte NC 28262 Mississauga Ontario Canada L5V 3E4 47
29. N Do not place plastic items such as salt and pepper shakers spoon holders or plastic wrappings on top of the range when it is in use These items could melt or ignite Pot holders towels or wood spoons could catch fire if placed too close to a flame Do not operate the burner for an extended period of time without cookware on the grate The finish on the grate may chip without cookware to absorb the heat Important Do not place aluminum foil or any material that can melt on the range cooktop If these items melt they may damage the cooktop For best cooking results cookware should have flat bottoms that rest level on the burner grate Before using cookware check for flatness by rotating a ruler across the bottom of the cookware Figure 7 Figure 7 Checking pan for flat bottom Please note The size and type of utensil used and the amount and type of food being cooked will influence the burner flame setting needed for best cooking results Cookware Material Types The most popular materials available are Aluminum Excellent heat conductor Some types of food will cause it to darken Anodized aluminum cookware resists staining amp pitting Copper Excellent heat conductor but discolors easily Stainless Slow heat conductor with uneven cooking results Durable easy to clean and resists staining Cast Iron A slow heat conductor however will retain heat very well Cooks evenly once cooking temperature is reac
30. NSTRUCTIONS GROUNDING INSTRUCTIONS con t A WARNING Avoid fire hazard or electrical shock Failure to follow this warning may cause serious injury fire or death For models without factory supplied power cord For personal safety this appliance must be properly grounded For maximum safety the power cord must be plugged into an electrical outlet that is the correct voltage is correctly polarized and properly grounded in accordance with local codes Is the personal responsibility of the consumer to have the appropriate outlet with the correct properly grounded wall recep tacle installed by a qualified electrician It is the responsibility and obligation of the consumer to contact a qualified installer to assure that the electrical installation is adequate and is in conformance with all local codes and ordinances See the installation instructions packaged with this appliance for complete installation and grounding instructions This appliance allows for conversion to Liquefied Petroleum L P Gas A WARNING Personal injury or death from electrical shock may occur if the conversion to L P gas is not made by a qualified installer or electrician A WARNING Any additions changes or conversions required in order for this appliance to satisfactorily meet the application needs must be made by a qualified tech nician Conversion to L P Gas If L P conversion is needed contact your local L P Gas provider for
31. TROLS 7 warm start convert cook 0 off Warm Keep Warm Use to keep food and dishes warm until served Probe Use to monitor internal temperature of food My Favorites some models Use to program and save favorite recipes settings Quick Preheat Gallery Model Powerplus Preheat Professional Model Use to raise oven to preheat temperature Convect Convert Use to convert regular recipe temperature to convection recipe temperature Slow Cook some models Use for cooking foods requiring long cooking times with lower temperatures Start Use for starting all cooking features Numeric Keypad Use to enter temperatures and times Off Use to turn off any oven function entered except time of day and minute time 19 OVEN CONTROLS Maximum and minimum time and temperature settings Feature Mode Minimum Temp Time Maximum Temp Time Preheat 170 F 77 C 550 F 288 C Bake 170 F 77 C 550 F 288 C Broil 400 F 205 C 550 F 288 C Convection Bake 170 F 77 C 550 F 288 C Convection Roast 170 F 77 C 550 F 288 C Convection Broil 400 F 205 C 550 F 288 C Slow Cook Lo 225 F 108 C Hi 275 F 135 C Warm 170 F 77 C 3 hours Steam Clean 170 F 77 C 20 minutes Meat Probe Lo 140 F 60 C Hi 210 F 99 C Timer 12 Hr 24 Hr 0 01 Min 0 01 Min 11 59 Hr Min 11 59 Hr Min
32. To set warm keep warm to turn on automatically 1 Arrange interior oven racks and place food in oven Set the oven properly for bake time or delay start For delay start instructions see page 24 For bake time instruc tions see page 24 2 Press warm keep warm If no key is touched within 25 seconds the request to turn on the feature will be canceled 3 Press start HLd will disappear and the temperature will be displayed The warm keep warm is set to turn on automatically after timed bake has finished 4 To turn the feature off at any time press off 29 OVEN CONTROLS Cooking with Meat Probe A CAUTION Do not use kitchen utensils to pull on the probe cable or handles Always insert and remove the probe using the provided handles as shown in Figure 29 and always use a pot holder to protect hands from possible burns In some models the probe receptacle is found at the top left side of the oven cavity Use the probe feature for best results when cooking foods such as roasts hams or poultry For meats like poultry and roasts using a probe to check internal temperature is the safest method to ensure properly cooked food The probe feature when set correctly will signal an alert when the internal food temperature reaches the desired set target temperature When active the probe displays the internal food tempera ture which is visible in the display during the cooking process This eliminates any guesswork or t
33. ace of 2 4 inches 5 10 cm around the cookware for proper air circulation Be sure pans and cookware do not touch each other the oven door sides or back of the oven cavity Hot air must be able to circulate around cookware for even heat to reach the food 15 BEFORE SETTING OVEN CONTROLS Type of oven racks Oven Rack Descriptions e Flat oven racks or the flat handle oven rack may be used for most cooking needs and may be placed in most oven rack positions e The offset oven rack some models provides addi tional stepdown positions from the standard flat rack design The offset design positions the base of the rack about of a rack position lower than the flat rack and may be used in most oven rack positions e The half oven rack some models design comes with a removable section that allows for taller cooking utensils e The Effortless Oven Rack some models is described in the Effortless Oven Rack system section on page 17 mA IMPORTANT All oven racks should be removed before a self clean operation Racks left in the oven during the high heat of the self clean function can easily discolor The ability of the racks to easily slide in and out along the rack positions may also be affected Effortless Oven rack Figure 15 Variety of oven racks 16 BEFORE SETTING OVEN CONTROLS Effortless Oven Rack system Some models are equipped with a special oven rack system that aut
34. assistance The L P conversion kit is provided with this appliance and is located on the lower rear back side panel of the range Before installing the kit be sure to read the L P Installation Instructions and follow them carefully when making the installation BEFORE SETTING SURFACE BURNERS Control locations of the gas surface burners Your built in range is equipped with gas surface burners with different BTU ratings The ability to heat food quicker and in larger volumes increases as the burner size increases The small simmer burner some models is best used for simmering delicate sauces etc This burner is located at the right rear burner position on the cooktop Figure 1 The standard burner can be used for most surface cooking needs The standard burners are located at the left front and left rear positions on the cooktop The power burners are best used for bringing large quanti ties of liquid rapidly up to temperature or when preparing larger quantities of food The POWER burner is located at the right front position on the cooktop Regardless of size always select cookware that is suitable for the amount and type of food being prepared Select a burner and flame size appropriate to the pan Never allow flames to extend beyond the outer edge of the pan Burner locations Figure 1 md IMPORTANT Do not allow spills food cleaning agents or any other material to enter the gas orifice holder open
35. at may ignite or a pan that has boiled dry may melt Glazed cooking utensils Only certain types of glass glass ceramic ceramic earthenware or other glazed utensils are suitable for cook top service without breaking due to the sudden change in temperature Check the manufacturer s recom mendations for cook top use When you are flaming foods under a ventilating hood turn the fan on IMPORTANT INSTRUCTIONS FOR USING YOUR OVEN Never use your appliance for warming or heating the room Use care when opening oven door lower oven door or warmer drawer Some models Stand to the side of the oven when opening the door of a hot oven Let hot air or steam escape before you remove or replace food in the oven Keep oven vent ducts unobstructed Touching surfaces in this area when the oven is on may cause severe burns Do not place plastic or heat sensitive items on or near the oven vent These items can melt or ignite Placement of Oven Racks Always place oven racks in desired location while oven is cool If rack must be moved while oven in hot do not let potholders contact hot heating element in oven Use potholders and grasp the rack with both hands to reposition Do not let potholders contact the hot heating elements in the oven Remove all cookware and utensils before moving the rack Do not use a broiler pan without its insert Broiler pans and inserts allow dripping fat to drain away from the high heat of t
36. ature The automatic timer of delayed start will turn the oven on and off at the time you select in advance To program the oven for a delayed start time with the bake function example baking at 375 F for 30 minutes starting at 5 30 1 Be sure that the clock is set with the correct time of day 2 Arrange interior oven rack and place the food in the oven 3 Press bake The display will show 350 Enter the desired temperature in this example 375 F 3 7 5 using the numeric keys 5 Press start The actual oven temperature will appear in the display 6 Press bake time and enter 3 0 using numeric keys 7 Press start 8 Press delay start 9 Enter the desired start time pressing 5 3 0 10 Press start When a delayed baking function starts the set oven temperature will appear Delay bake and the current time of day will appear in the display When the desired start time is reached the actual oven temperature appears in display and delay disappears The oven starts to bake at the previ ously selected temperature Convection Cooking Multiple rack baking may increase cook time for some foods but the overall result is time saved Some food may cook faster and more evenly with convection bake Convection baking cycles the bake broil and convection elements with a fan to circulate the heat evenly and continu ously within the oven See Figure 24 Benefits of convection cooking e Multiple rack baking e
37. automatically 1 Be sure the clock is set with the correct time of day and the oven door is closed 2 Press self clean CLn and 3 00 HR will show in the display The control will automatically clean for a 3 hour period default self cleaning cycle time If a 2 or 4 hour clean time is desired press self clean multiple times to toggle between 2 3 or 4 hours 3 Press start door Loc will appear a beep will sound and the word DOOR and the icon will flash CLn will remain on in the display 4 As soon as the control is set the motor driven oven door lock will begin to close automatically Once the door is locked the DOOR indicator light and icon will stop flashing and remain on and the oven icon will appear in the display Allow about 15 seconds for the oven door to lock completely Figure 41 Clean around the oven door gasket 38 When the self clean cycle is completed 1 HOT will appear in the display The time of day the word DOOR and the icon will remain in the display 2 Once the oven has cooled for approximately 1 hour door OPn will appear and the word DOOR and the lock icon will flash until the door unlocks The door can be opened and the display will show the time of day To stop or Interrupt a self cleaning cycle If it becomes necessary to stop or interrupt a self cleaning cycle due to excessive smoke or fire in the oven 1 Press off 2 The oven door can only be opened afte
38. be used in or around any part of the oven e Do not clean the oven door gasket The door gasket is essential for a good seal Care should be taken not to rub damage or move the gasket e Some birds are extremely sensitive to the fumes given off during the self clean cycle of any oven Move birds to another well ventilated room GROUNDING INSTRUCTIONS For models equipped with power cord A WARNING Avoid fire hazard or electrical shock Failure to follow this warning may cause serious injury fire or death For personal safety this appliance must be properly grounded For maximum safety the power cord must be plugged into an electrical outlet that is the correct voltage is correctly polarized and properly grounded in accordance with local codes For personal safety this appliance must be properly grounded For maximum safety the power cord must be plugged into an electrical outlet that is the correct voltage is correctly polarized and properly grounded in accor dance with local codes Power supply cord with 4 prong grounding plug 240V grounded wall receptacle It is the responsibility and obligation of the consumer to contact a qualified installer to assure that the elec trical installation is adequate and is in conformance with all local codes and ordinances See the installation instructions packaged with this appliance for complete installation and grounding instructions IMPORTANT SAFETY I
39. body parts Painted decorative trims Surface burners Burner grates Easy Care Stainless Steel some models Stainless Steel Oven interior Procelain Porcelain enamel broiler pan and insert available by mail order Door liner and body parts Oven racks Oven door Recommendation Use hot soapy water and a cloth Dry with a clean cloth Using a soft cloth clean with mild dish detergent and water or a 50 50 solution of vinegar and water Follow by rinsing the area with clean water dry and polish with a soft cloth Glass cleaners may be used if sprayed on a soft cloth first Do not spray liquids directly on the oven control and display area Do not use large amounts of water on the control panel excess water on the control area may cause damage to the appliance Do not use other liquid cleaners abrasive cleaners scouring pads or paper towels they will damage the finish To remove control knobs turn to the OFF position grasp firmly and pull straight off the shaft To replace knobs after cleaning line up the flat sides of both the knob and the shaft then push the knob into place See Cleaning the cooktop and surface burners for special instructions on page 41 Your oven finish may be made with stainless steel some models Clean the stainless with warm soapy water using a clean sponge or cloth Rinse with clean water and dry with a soft clean cloth Do not use any store bought cleaners like stainless stee
40. ce when it is shipped from the factory Service calls to repair or replace appliance light bulbs air filters water filters other consumables or knobs handles or other cosmetic parts Surcharges including but not limited to any after hour weekend or holiday service calls tolls ferry trip charges or mileage expense for service calls to remote areas including the state of Alaska Damages to the finish of appliance or home incurred during installation including but not limited to floors cabinets walls etc Damages caused by services performed by unauthorized service companies use of parts other than genuine Electrolux parts or parts obtained from persons other than authorized service companies or external causes such as abuse misuse inadequate power supply accidents fires or acts of God DISCLAIMER OF IMPLIED WARRANTIES LIMITATION OF REMEDIES CUSTOMER S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR REPLACEMENT AS PROVIDED HEREIN CLAIMS BASED ON IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW BUT NOT LESS THAN ONE YEAR ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR
41. ckets screws or any other part of the oven Remove the oven door from any unused oven if it is to be stored or discarded Be sure to have an appropriate foam type fire extinguisher available visible and easily acces sible located near the appliance IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR USING YOUR COOKTOP A WARNING Use Proper Flame Size Adjust flame size so it does not extend beyond the edge of the utensil The use of undersized utensils will expose a portion of the burner flame to direct contact and may result in ignition of clothing Proper relationship of utensil to flame will also improve efficiency Know which knob controls each surface burner Place a pan of food on the burner before turning it on and turn the burner off before removing the pan Always turn knob to the full LITE position when igniting top burners Visually check that burner has lit Then adjust the flame so it does not extend beyond the edge of the utensil Utensil handles should be turned inward and not extend over adjacent surface burners To reduce the risk of burns ignition of flammable materials and spillage due to unintentional contact with the utensil the handle of the utensil should be posi tioned so that it is turned inward and does not extend over adjacent surface burners Never leave surface burners unattended at high heat settings Boil overs cause smoking and greasy spill overs th
42. d splatters will cause excessive smoking Oven control panel beeps and displays any F or E code error Oven control has detected a fault or error condition Press Clear off key to clear the error code Try Bake or Broil function If the F or E code error repeats turn OFF power to appliance wait 5 minutes and then repower appliance Set clock with correct time of day Try Bake or Broil function again If fault recurs press Clear off to clear and call 1 800 4 MY HOME for assistance Soil not completely removed after Self Clean Self Clean was interrupted Review instructions in Self Clean section Excessive spills on oven bottom Clean before starting Self Clean Failure to clean soil from the oven frame the door liner outside the oven door gasket and the small area at the front center of the oven bottom These areas are not in the self cleaning area but get hot enough to burn on residue Clean these areas before starting the self cleaning cycle Burned on residue can be cleaned with a stiff nylon brush and water or a nylon scrubber Be careful not to damage the oven gasket If your oven is cooking poorly or self clean is performing badly perform the following check Press Broil Press START Place your hand near the handle on the oven door Between the door and the control panel you should feel a rush of air on your hand If so your unit is functioning properly and you have had a Power Failure in your home If no air stream is p
43. dentification of surfaces for example oven vent openings and surfaces near these openings oven doors and windows of oven doors md IMPORTANT Read and follow the below instructions and precau tions for unpacking installing and servicing your appliance Remove all tape and packaging before using the oven Destroy the carton and plastic bags after unpacking the oven Never allow children to play with packaging material Proper installation is essential Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the National Electrical Code ANSI NFPA No 70 latest edition and local electrical code require ments In Canada install in accordance with CSA Standard C22 1 Canadian Electrical code Part 1 and local electrical code requirements Install only per installation instructions provided in the literature package for this oven User Servicing Do not repair or replace any part of the appliance unless specifically recom mended in the manuals All other servicing should be done only by a qualified technician This reduces the risk of personal injury and damage to the oven Ask your dealer to recommend a qualified techni cian and an authorized repair service Know how to disconnect the power to the oven at the circuit breaker or fuse box in case of an emergency Never modify or alter the construction of an oven by removing the leveling legs panels wire covers anti tip bra
44. display Convection convert may only be used with a convection bake cooking mode It can be used with a delay start and bake time For delay start instructions and bake time instructions see page 24 If convection conversion is used with the bake time and delay start features CF check food will be displayed when 75 of the bake time complete At this time the oven control will sound three long beeps at regular intervals until baking time is finished The control will display End and continue to beep at regular intervals until off is pressed To set the oven for convection bake with a standard baking recipe temperature of 400 F 1 Arrange interior oven racks 2 Press convect Convect and bake will flash and 350 will appear in the display 3 Pres 400 Convect and bake will keep flashing and 400 will appear in the display Press start Set bake time or delay start if needed For delay start or bake time instructions see page 24 6 Press convect convert and the oven temperature displayed will be 25 F lower than the original set temperature of 400 F The actual oven temperature and the fan icon will be displayed A beep will sound once the oven temperature reaches 375 F and the display will show 375 CONVECT BAKE and the fan icon 7 Place food in the oven amp NOTE When using a bake time under 20 minutes the convec tion convert will not beep and display the CF message Pressing off will stop the feature a
45. e the oven See Setting the Clock on page 20 Be sure oven controls are set properly See Oven Control Functions on page 14 and review instructions for the desired cooking function in this manual or see Entire appliance does not operate in this checklist Oven light does not work Be sure the oven light is secure in the socket See Replacing the oven light on page 41 Flames inside oven or smoking from oven vent Excessive spills in oven Grease or food spilled onto oven bottom or oven cavity Wipe up excessive spills before starting oven If flames or excessive smoke are present when using Broil see Convection Cooking on page 25 Oven racks discolored or do not slide easily Oven racks left in oven cavity during Self Clean Always remove oven racks from oven cavity before starting a self clean cycle Clean by using a mild abrasive cleaner following manufacturer s instructions Rinse with clean water dry and replace in oven 45 BEFORE YOU CALL Oven smokes excessively when broiling Incorrect setting Follow broiling instructions in Setting Oven Controls section Meat too close to the broil element Reposition broil rack to provide proper clearance between the meat and broil element Remove excess fat from meat Cut remaining fatty edges to prevent curling but do not cut into lean Grease build up on oven surfaces Regular cleaning is necessary when broiling frequently Grease or foo
46. er and will beep when a set temperature has been reached even if the control is set to silent operation Setting the Timer The timer on off key controls the minute timer and serves as an extra timer and can be used during any of the other oven control functions To set the minute timer 1 Press timer on off will appear and timer will flash in the display 2 Press the number keys to set the desired time 3 Press start The time will begin to count down and Timer will stay in the display When the time expires End and Timer will show in the display The clock will beep three times every 30 seconds until timer on off is pressed 4 To cancel the minute timer before the set time expires press timer on off amp NOTE If start is not pressed the timer will return to the time of day after 25 seconds The timer does not start or stop the cooking process 21 OVEN CONTROLS Setting Oven Lockout Feature Thee key controls the oven lockout When active this feature automatically locks the oven door preventing the oven from being turned on It does not affect the clock timer or the interior oven lights To activate the oven lockout feature 1 Press and hold g or 3 seconds 2 After 3 seconds door Loc will appear a tone will sound and the word DOOR and the icon will flash 3 Once locked DOOR and the lock icon will stop flashing and remain visible with the Loc To reactivate normal oven operation
47. ers on some models or TURBO BOIL burner on some models are recommended for bringing large quantities of liquid to temperature and when preparing larger quantities of food To set surface burners 1 Place cooking utensil on center of surface burner grate Be sure the cooking utensil sets stable on the burner grate 2 Push the desired surface control knob in and turn coun terclockwise out of the OFF position 3 Release the surface control knob and rotate to the LITE position Visually check that the burner is lit 4 Once the burner has a flame push the control knob in and turn counterclockwise to the desired flame size Use the control knob markings and adjust the flame as needed Important e Do not cook with the surface control knob left in the Lite position The electronic ignitor will continue to spark if the control knob setting remains in the LITE position e When setting any surface control knob to the Lite position all electronic surface ignitors will spark at the same time However only the surface burner you are setting will ignite e Never place or straddle a cooking utensil over 2 different surface cooking areas at the same time This can cause uneven heating results e In the event of an electrical power outage the surface burners can be lit manually Use caution when lighting surface burners manually To light a surface burner hold a lit match to the burner head then slowly turn the surface control
48. for 2 minutes before broiling Press broil The display will show 550 Press 5 0 0 If a lower broil temperature is desired minimum broil temperature setting is 400 F press the desired temperature before continuing to Step 5 5 Press start The oven will begin to broil 500 will appear in the display 6 Broil on one side until food is browned turn and cook on the second side Season and serve Always pull the rack out to the stop position before turning or removing food 7 To stop broiling press off To ensure proper results use only Electrolux Home Products Inc approved broil pan and insert Broiler Insert Searing Broiler Pan Pan amp Insert Figure 28 Broiling accessories available at www frigidaire com Cook time Food item Rack Position Temperature 1st side 2nd side Doneness Steak 1 thick 3rd or 4th 550 F 6 00 4 00 Rare 3rd or 4th 550 F 7 00 5 00 Medium Pork Chops 3 4 thick 3rd or 4th 550 F 8 00 6 00 Well Chicken Bone In 3rd 450 F 20 00 10 00 Well Chicken Boneless 3rd or 4th 450 F 8 00 6 00 Well Fish 3rd 500 F 13 00 Well Shrimp 3rd 550 F 5 00 Well Hamburger 1 thick 3rd or 4th 550 F 9 00 7 00 Medium 28 Setting Slow Cook some models The slow cook feature is best for cooking at lower tempera tures for longer periods of time and works best for beef ribs and brisket pork roasts and poultry dishes Slow cook has t
49. he door to allow hot air or steam to escape A self cleaning oven cleans itself with high temperatures well above normal cooking temperatures which eliminate soils completely or reduces them to a fine powdered ash you can wipe away with a damp cloth What to expect during self cleaning While in self clean mode the oven heats to temperatures much higher than those used in normal cooking Sounds of metal expansion and contraction are normal Odors are normal as the food soil is being removed Smoke may appear through the oven vent If heavy spills are not wiped up before cleaning they may flame and cause more smoke and odor than usual This is normal and safe and should not cause alarm If available use an exhaust fan during the self cleaning cycle OVEN CONTROLS md IMPORTANT Adhere to the following cleaning precautions e Do not use oven cleaners or protective coatings in or around any part of the oven interior Do not clean the oven door gasket Take care not to rub damage or remove the gasket or use any cleaning substances on the oven door gasket See Figure 41 Doing so could cause damage and reduce the efficiency of the oven s performance e Clean any soil from the oven frame door liner outside the oven door gasket and the small area at the front center of the oven bottom with soap and water See Figure 41 These areas heat sufficiently to burn soil on e Remove any excessive spills from the oven cavity bef
50. he broiler Do not cover the broiler insert with aluminum foil exposed fat and grease could ignite Protective Liners Do not use aluminum foil to line surface unit drip bowls or oven bottoms except as suggested in the manual Improper installation of these liners may result in a risk of electric shock or fire Do not cook food on the oven bottom Always cook in proper cookware and always use the over racks IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR CLEANING YOUR OVEN A CAUTION Before manually cleaning any part of the oven be sure all controls are turned off and the oven is cool Cleaning a hot oven can cause burns e Clean the oven regularly to keep all parts free of grease that could catch fire Do not allow grease to accumulate e Always follow the manufacturer s recommended directions for use of kitchen cleaners and aerosols Be aware that excess residue from cleaners and aerosols may ignite causing damage and injury e Clean ventilating hoods frequently Grease should not be allowed to accumulate on the hood or filter Follow the manufacturer s instructions for cleaning hoods SELF CLEANING OVENS e Clean only the parts listed in this manual Before using self clean remove the broiler pan any food utensils and cookware from the oven Remove oven racks unless otherwise instructed e Do not use oven cleaners No commercial oven cleaner or oven liner protective coating of any kind should
51. he need to open the oven door to check the thermometer receptacle probe connector handle probe cable handle probe sensor Figure 29 Using the probe 30 md IMPORTANT e Do not store the probe inside the oven Use only the original probe provided Connecting any other probe or device could result in damage to the oven control electronics and the receptacle e Before starting self clean double check that the probe is removed from the oven interior Defrost frozen foods completely before inserting the probe Proper placement of probe in food e Insert the probe so that the probe tip rests inside the center of the thickest part of meat or food See Figure 30 For best results do not allow the probe temperature sensor to contact bone fat gristle or the cookware Insert probe tip to center of food Figure 30 Probe in thickest area of food e For bone in ham or lamb insert the probe into the center of lowest large muscle or joint e For meat loaf or casseroles insert the probe into center of food e When cooking fish insert meat probe just above the gill e For whole poultry or turkey fully insert the probe sensor into the thickest part of inner thigh just below the leg See Figure 31 Figure 31 To set probe 1 Insert the probe into the food Place prepared food on the desired oven rack position and slide into the oven 2 Plug the connector end of the probe all
52. hed Porcelain enamel on metal Heating characteristics will vary depending on base material Glass Slow heat conductor 11 BEFORE SETTING SURFACE BURNERS Operating the gas surface controls Setting proper surface burner flame size 1 Place cooking utensil on surface burner Start on the highest control setting and adjust to the desired setting Use the recommendations below as a guide for determining proper flame size for various types of cooking The size and type of utensil used and the amount of food 2 Push the surface control knob in and turn counterclock wise out of the OFF position 3 Release the knob and rotate to the LITE position being cooked will influence the setting needed Figure 8 Note All four electronic surface ignitors will spark at the same time However only the burner you Flame Size Type of Cooking are turning on will ignite High Flame e Start most foods Visually check that the burner has a flame e Bring water to a boil Turn the control knob counterclockwise to the desired e Pan broiling flame size The control knobs do not have to be set at a particular setting Use the knob indicator settings to Medium Flame e Maintain slow boil adjust the flame as needed Do not cook with the e Thicken sauces and surface control knob in the LITE position The elec gravies tronic ignitor will continue to spark if the knob is left in the LITE position Steaming foods Low Flame e Keep food
53. hen baking using two oven racks position cookware as shown in Figure 23 Allow at least 2 inches 5 cm of space between cookware for proper air circulation Dark or dull bakeware absorbs more heat than shiny bakeware It may be necessary to reduce oven temper ature and cook time to prevent overbrowning of some foods Dark bakeware is recommended for pies Shiny bakeware is recommended for cakes cookies and muffins For batter and dough based baked goods such as cakes pastries and breads use the convection function for best results Do not open the oven door often Opening the door will reduce the temperature in the oven and may increase the cooking time necessary for best results Figure 23 Pan spacing 23 OVEN CONTROLS Setting Bake Time Use bake time when setting the oven to cook for a specific length of time and shut off automatically when the time is complete When cooking time ends the oven will shut off and will beep This feature can be used with bake convection bake convection roast and slow cook modes To program the oven to begin baking immediately and to shut off automatically example Bake at 350 F for 30 minutes 1 Be sure the clock is set for the correct time of day 2 Arrange interior oven rack s and place the food in then oven Press bake 350 will appear in the display Press start The actual oven temperature will appear in the display Press bake time will appear in the d
54. ides Do not use the oven door handle See Figure 49 2 Holding the oven door at the same angle as the removal position seat the hook of the hinge arm over the roller pins located on each side of the oven door frame See Figure 49 and Figure 50 The hook of the hinge arms must be fully seated onto the roller pins 3 Fully open the oven door horizontal with floor See Figure 47 4 Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges to the locked position See Figure 48 5 Close the oven door md IMPORTANT Special door care instructions Most oven doors contain glass that can break Do not close the oven door until all the oven racks are fully in place Do not hit the glass with pots pans or any other object Scratching hitting jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later time CARE AND CLEANING Oven door hinge CNU locations EY oN Q gt Figure 47 Door hinge location Figure 48 Door hinge locks about 10 oven door Figure 49 Holding door for removal roller pin hinge arm Figure 50 Replacement and location of hinge arm and roller pin 43 BEFORE YOU CALL Solutions to Common Baking Problems For best cooking results heat the oven before baking cookies breads cakes pies or pastries etc There is no need to preheat the oven for roasti
55. in at the main source or plug the appliance back in 5 Be sure to reset the time of day on the clock Figure 43 Halogen light 41 CARE AND CLEANING Removing the Warmer Drawer To remove the warmer drawer A WARNING Electrical shock hazard can occur and result in serious injury or death Disconnect appliance from electric power before cleaning and servicing the warmer drawer 1 Turn power OFF to the appliance before removing the warmer drawer Open the warmer drawer completely On left warmer drawer rail locate black release lever and press up with finger while pulling out slightly on the oven drawer handle On right warmer drawer rail locate black release lever and press down with finger while pulling out slightly on the warmer drawer handle Figure 44 4 The warmer drawer should now be released from the rails Remove warmer oven drawer using level and square motion completely out and away from the appli ance Left hand rail and release RELEASE asyv313Y Right hand rail and release Figure 44 Removing the warmer drawer 42 To replace the warmer drawer 1 Pull the bearing glides to the front of the outer compart ment glide channels until they snap into place See Figure 43 Figure 45 Bearing glide placement 2 Carefully line up both sides of the warmer drawer glide rails to the outer compartment glide channels located
56. inches from the door frame and allow to air dry Local water sources often contain minerals hard water and will leave deposits on the oven cavity If this occurs wipe cavity with vinegar or lemon juice Use distilled or filtered water If the door is opened during the steam clean cycle a beep will sound and d 0 will show in the display Close the oven door Keep oven door closed during steam clean cycle Steam clean cannot be programmed with a delay start If steam clean results are not satisfactory run a self clean See Self Cleaning Operation on page 37 Self Cleaning Operation A CAUTION e Donotline the oven walls racks bottom or any other part of the oven with aluminum foil Doing so will block heat distribution produce poor baking results and cause permanent damage to the oven interior aluminum foil will melt to the interior surface of the oven e The health of some birds is extremely sensitive to the fumes given off during the self cleaning cycle of any oven Move birds to another well ventilated room e During the self cleaning cycle the outside of the oven can become very hot to the touch e Do not leave small children unattended near the appliance e Do not force the oven door open This can damage the automatic door locking system e Use caution when opening the door after the self cleaning cycle is completed The oven may still be very hot e Stand to the side of the oven door when opening t
57. ing Always keep the burner caps and burner heads in place whenever the surface burners are in use Assembly of the burner caps and burner grates It is very important to make sure that all of the surface burner caps and surface burner grates are installed correctly and at the correct locations 1 Remove all packing material from cooktop area 2 Discard all packing material if applicable 3 Unpack burner grates and position on the cooktop On round style burners the burner cap lip Figure 2 should fit snug into the center of burner head and rest level Refer to Figure 3 for correct and incorrect burner cap placement Once in place you may check the fit by gently sliding the burner cap from side to side Figure 4 to be sure it is centered and firmly seated When the burner cap lip makes contact inside the center of the burner head you will be able to hear the burner cap click Burner cap Burner cap lip Tmwrievew7ed sry Burner head Burner cap and burner head Figure 2 Correct burner cap Incorrect burner cap placement placement Figure 3 Proper burner cap placement Figure 4 Gently moving cap for proper placement BEFORE SETTING SURFACE BURNERS Double Ring style burners some models The Double Ring burner only operates properly with two burner caps in place Be sure the burner cap lips are posi tioned facing down towards the burner head and into the recessed areas Figure 5 on each side
58. isplay Enter the desired baking time by pressing 3 0 Press start Once the timed bake feature has started the current time of day will appear in the display Press off when baking has finished or at any time to cancel the bake time feature A bake time of 0 minute can also be entered to cancel the bake time feature and keep the oven in its current cooking mode When the timed bake finishes 1 The display will show End and the time of day and the oven will shut off automatically 2 The control will beep three times and continue to beep three times every 30 seconds until off is pressed amp NOTE Baking time can be set for any amount of time between 1 minute to 5 hrs and 59 minutes The time remaining can be shown in the timer section of the display by pressing bake time at any moment of the cooking Once bake time has started baking a beep will sound when the oven temperature reaches the set temperature 24 Setting Delay Start A CAUTION Food Poisoning Hazard Do not let food sit for more than one hour before or after cooking Doing so can result in food poisoning or sickness Foods that can easily spoil such as milk eggs fish meat or poultry should be chilled in the refrigerator first Even when chilled they should not stand in the oven for more than one hour before cooking begins and should be removed promptly when finished cooking Bake convect bake time and delay start keys control the delayed start fe
59. knob to LITE After burner lights push in and turn knob to desired setting SETTING SURFACE BURNERS e When operating the oven it is possible for residual heat from the oven to build up and over time to eventually transfer to the surface control knobs located directly above the oven door Figure 10 Proper way to set burners Do not place flammable items such as plastic salt and pepper shakers spoon holders or plastic wrappings on the cooktop when it is in use These items could melt or ignite Potholders towels or wooden spoons could catch fire if placed too close to the range cooktop Do not place aluminum foil or any material that can melt on the range cooktop If these items melt they may perma nently damage the cooktop surface Home Canning Be sure to read and observe all the following points when home canning with your appliance Check with the United States Department of Agriculture USDA website and be sure to read all the information they have available as well as follow recommendations for home canning procedures e Use only quality flat bottom canners when home canning Use a straight edge to check canner bottom e Make sure the diameter of the canner does not exceed 1 inch beyond the surface element markings or burner e Start with hot tap water to bring water to boil more quickly e Use the highest heat setting when first bringing the water to a boil Once boiling is achieved reduce heat to lowest
60. l cleaners or any other types of cleaners containing any abrasive chlorides chlorine or ammonia It is recommended to use mild dish soap and water or a 50 50 solution of water and vinegar Gentle scouring with a soapy scouring pad will remove most spots Rinse with a 1 1 solution of clear water and ammonia If necessary cover difficult spots with an ammonia soaked paper towel for 30 to 40 minutes Rinse with clean water and a damp cloth and then scrub with a soap filled scouring pad Rinse and wipe dry with a clean cloth Remove all cleaners or the porcelain may become damaged during future heating Oven racks must be removed from oven cavity Clean by using a mild abrasive cleaner following manufacturer s instructions Rinse with clean water and dry Use soap and water to thoroughly clean the top sides and front of the oven door Rinse well You may use a glass cleaner on the outside glass of the door Do not immerse the door in water Do not spray or allow water or the glass cleaner to enter the door vents Do not use oven cleaners cleaning powders or any harsh abrasive cleaning materials on the outside of the oven door Do not clean the oven door gasket On self clean models the oven door gasket is made of a woven material which is essential for a good seal Care should be taken not to rub damage or remove this gasket 40 Cleaning the cooktop and surface burners To avoid possible burns turn off all of the surface bur
61. more than 1 hour before cooking begins and should be removed promptly when finished cooking Power failure while using Sabbath feature Should you experience a power failure or interruption the oven will shut off When power is returned SF Sabbath Failure will be displayed and the oven will not turn back on automatically If your food was nearly fully cooked you may allow the trapped heat in the oven to finish the cooking process Otherwise you should remove the food when the power failure occurs because you may only start the oven once during the Sabbath Jewish holidays After the Sabbath observance turn off the Sabbath feature Press and hold both the bake time and delay start keys for at least 3 seconds SAb will disappear from the display and the oven may be used with all normal functions 35 OVEN CONTROLS Steam Clean The steam clean feature offers a chemical free and time saving method to assist in the routine cleaning of your oven Steam clean may be used before manually cleaning the oven to help loosen soils on the oven bottom md IMPORTANT Do not add ammonia oven cleaners or any other household cleaners or chemicals to the water used in the steam clean cycle Before manually cleaning any part of the oven be sure all controls are turned off and the oven is cool The oven may be hot and can cause burns To set a steam clean cycle 1 Oven should be at room temperature If the oven tem perature is above
62. ners and allow them to cool Any additions changes or conversions required in order for this appliance to satisfactorily meet the application needs must be made by an authorized qualified agency Routinely clean the cooktop Wipe with a clean damp cloth and wipe dry to avoid scratches Keeping the surface burner head ports and slots clean will prevent improper ignition and an uneven flame To clean recessed and contoured areas of cooktop If a spill occurs on or in the recessed or contoured areas blot up spill with an absorbent cloth Rinse with a clean damp cloth and wipe dry To clean burner grates e Clean when the grates are cool Use nonabrasive plastic scrubbing pad and mild abrasive cleanser e Food soils containing acids may affect the finish Clean immediately after the grates are cool Thoroughly dry grates immediately following cleaning To clean burner caps e Remove caps from burner heads after they have cooled Clean heavy soils with a plastic scrubbing pad and absorbent cloth Thoroughly dry burner caps imme diately following cleaning including the bottom and inside of cap e Do not use abrasive cleaners Do not clean burner caps in the dishwasher Do not operate surface burners without burner caps properly in place To clean the surface burner heads For proper gas flow it may be necessary to clean the burner head and slots First use a clean damp cloth to soak up any spills Remove any food from between
63. ng temperature between 170 F 77 C and 550 F 288 C Once saved the user needs only to select the my favorites key and the baking function will start automatically with the pre programmed recipe The oven can recall a cooking sequences from its internal memory which is easily acces sible from a one touch key This function can be used with bake convection bake convection roast and preheat To save a favorite example 450 F bake for 30 minutes 1 Press bake The default temperature will appear in the display Enter temperature needed i e 4 5 0 Press start Press bake time Enter time needed i e 3 0 Press start a PF en Press and hold for 3 seconds my favorites key The icon will be shown to confirm your setting has been saved 6 The bake recipe will start If you do not need it at this time press off To recall a favorite 1 Press my favorites 2 Press start amp NOTE Recalling a my favorites recipe can only be done when the oven is not in operation To overwrite a favorite To overwrite my favorites simply start a new cooking sequence and save it as shown in example above The new my favorites settings will overwrite the old ones To delete a favorite Press my favorites for 3 seconds to delete while the oven is not in operation and no cooking mode has been set The heart icon will turn off indicating that the recipe has been deleted 27 OVEN CONTROLS Setting Broil Thi
64. ng meat or baking casseroles The cooking times and temperatures needed to bake a product may vary slightly from your previously owned appli Baking Problems and Solutions Chart ance Baking Problems Causes Cookies and biscuits Cookies and biscuits put burn on the bottom into oven before the preheating time is completed Oven rack is overcrowded Dark pans absorbs heat too fast Cakes too dark on top Cakes put in oven before or bottom preheating time is _ completed Rack position too high or too low Oven too hot Cakes not done in Oven too hot center Incorrect pan size a Pan not centered in oven Cakes not level Range not level Pan too close to oven wall or rack overcrowded Pan warped Foods not done when e Oven too cool cooking time is over amp Ovenov rcrowded e Oven door opened too frequently 44 Corrections e Allow oven to preheat to desired temperature before placing food in oven e Choose pan sizes that will permit 2 to 4 of air space 5 1 cm to 10 2 cm on all sides when placed in the oven e Use a medium weight baking sheet e Allow oven to preheat to the selected temperature before placing food in the oven e Use proper rack position for baking needs e Set oven temperature 25 F 13 C lower than recommended e Set oven temperature 25 F 13 C lower than recommended e Use pan size suggested in recipe e Use proper rack position and
65. ning at the set start time for the period of time previously selected At that time the icon DELAY will go out CLn and oven icon will appear in the display OVEN CONTROLS md IMPORTANT Do not attempt to force the door open while self clean is active or when the motor door latch is unlocking or the door lock indicator is flashing Once the display is clear the oven door can then be opened and the timer will revert back to the time of day If Self Clean was active and then interrupted by a power failure or cancelled before the oven was thoroughly cleaned it may be necessary to run another Self Clean cycle When the self clean cycle is completed 1 HOT will appear in the display The time of day the word DOOR and the lock icon will remain in the display 2 When oven cools approximately 1 HOUR door OPn will appear and the word DOOR and the icon will flash until the door is unlocked amp NOTE If the oven temperature was high enough when the Self Clean was interrupted the oven control may not allow another Self Clean to be set for up to 4 hours 39 CARE AND CLEANING Cleaning Various Parts of Your Oven Before cleaning any part of the oven be sure all controls are turned off and the oven is cool Remove spills and any heavy soiling as soon as possible Regular cleaning will reduce the number of major cleaning later Surface Type Aluminum and Vinyl Painted and plastic control knobs Painted
66. ols and follow all instructions given Do not attempt to install or operate your appliance until you have read the safety precautions in this manual Safety items throughout this manual are labeled with a WARNING or CAUTION statement based on the risk type DEFINITIONS VNThis is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all safety message that follow this symbol to avoid possible injury or death A WARNING Indicates a potentially hazardous situation which if not avoided may result in death or serious injury A CAUTION Indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury md IMPORTANT Indicates installation operation maintenance or valuable information that is not hazard related amp NOTE Indicates a short informal reference Usually something written down to assist the memory or for future reference A WARNING Storage In or On Appliance Flammable materials should not be stored in an oven or near surface units This includes paper plastic and cloth items such as cookbooks plastic ware and towels as well as flammable liquids Do not store explosives such as aerosol cans on or near the oven A WARNING If the information in this manual is not followed exactly a fire or explosion may result causing property damage personal injury or death FOR YOUR SAFETY Do not store or use gasoline or othe
67. omatically extends the oven rack to assist in access to your food items This rack extends when the oven door is opened or closed md IMPORTANT Only the Effortless Oven Rack system performs best when connected and used in oven rack position 2 If the rack system is assembled with the connector arms the Effortless Oven rack may be used in oven rack positions 1 2 and 3 To assemble the Effortless Oven Rack system 1 Locate all required parts You will need the supplied oven rack Effortless Oven Rack is a flat rack with a special dark coating on the left and right rack sides and the two supplied chrome connector arms 2 Be sure the oven is completely cool before proceeding Open the oven door 3 Place the oven rack in positions 1 2 or 3 see Figure 16 to verify positions Figure 16 Rack positions Be sure the rack connector brackets are at the rear of the range and pointing towards oven bottom See Figure 17 rack connector bracket Figure 17 Bracket must be at rear of the range connector So 2 oven arm 7 ce rack aS Z K Dx KSA a 0j INT open oven arm door Figure 18 Assembly of the Effortless oven rack 4 Assemble one connector arm at a time With the oven door open and the oven rack in place install one end of the connector arm to the hole in the door connector bracket Figure 18 and the other end in the hole in the rack connector bracket Figure 18 The oven rack may need
68. operly Check that all surface burner caps are level and seated correctly on surface burner heads Incorrect L P conversion Refer to L P conversion kit instructions to correct WARRANTY Your appliance is covered by a one year limited warranty For one year from your original date of purchase Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed used and maintained in accordance with the provided instructions Exclusions This warranty does not cover the following 1 Products with original serial numbers that have been removed altered or cannot be readily determined 2 Product that has been transferred from its original owner to another party or removed outside the USA or Canada Rust on the interior or exterior of the unit Products purchased as is are not covered by this warranty Food loss due to any refrigerator or freezer failures Products used in a commercial setting Service calls which do not involve malfunction or defects in materials or workmanship or for appliances not in ordinary household use or used other than in accordance with the provided instructions Service calls to correct the installation of your appliance or to instruct you how to use your appliance Expenses for making the appliance accessible for servicing such as removal of trim cupboards shelves etc which are not a part of the applian
69. ore starting the self cleaning cycle To clean use hot soapy water and a cloth Large spills can cause heavy smoke or fire when subjected to high tempera tures Do not allow food spills with a high sugar or acid content such as milk tomatoes sauerkraut fruit juices or pie filling to remain on the surface as they may leave a dull spot even after cleaning e Do not use aluminum foil or liners in the oven These items are not made to withstand the very high temper atures of a self clean cycle and will melt e Remove all oven racks and accessories If oven racks are not removed before a self clean they will lose their special coating and will no longer slide in and out of the oven cavity effortlessly e Oven racks accidentally left in the oven during self clean may be wiped down after cooling with a high temperature cooking oil to lubricate them 37 OVEN CONTROLS Setting Self Clean Cycle Duration The self clean key controls the self cleaning feature If you are planning to use the oven directly after a self clean cycle remember to allow time for the oven to cool down and the oven door to unlock This normally takes about one hour A 3 hour self clean cycle will actually take about 4 hours to complete It is recommended to use a 2 hour self clean cycle for light soils a 3 hour cycle for average soils and a 4 hour cycle for heavy soils To set the controls for a 3 hour self cleaning cycle to start immediately and shut off
70. p When the oven is on warm air passes through this vent This venting is necessary for proper air circulation in the oven and good baking results While the oven is in operation it is normal for steam or moisture to appear near the vent Important Do not block oven vent Figure 14 Do not block oven vent location A CAUTION Always use pot holders or oven mitts when using the oven When cooking the oven interior and exterior oven racks and cooktop will become very hot which can cause burns A WARNING Protective Liners Do not use aluminum foil to line the oven bottom Only use aluminum foil as recommended in this manual Improper installation of these liners may result in risk of electric shock or fire Removing replacing and arranging flat or offset oven racks To arrange e Always arrange the oven racks when the oven is cool prior to operating the oven To remove e Pull the oven rack straight forward until it reaches the stop position Lift up front of oven rack slightly and slide out To replace e Place the oven rack on the rack guides on both sides of oven walls Tilt the front of oven rack upward slightly and slide the oven rack back into place Be sure oven racks are level before using Important Remove all oven racks and accessories from the oven before performing a self clean operation Air circulation in the oven For best results the air circulation must be optimal when baking Allow a sp
71. possible setting to maintain that boil 13 SETTING SURFACE BURNERS Setting Double Ring Burner some models The versatile Double Ring surface burner offers a complete range of gas surface settings from the same burner position At the lowest setting only the burner s inner ring is active using a smaller flame perfect for simmering The burner s outer ring when set for HI will provide a gas flame that may be used to bring a large pan of liquid to boil quickly Figure 11 Burner at highest L setting and simmer R Operating the Double Ring Burner 1 Push right front surface burner control knob in and turn counterclockwise out of the OFF position and rotate to the LITE position 2 Visually check that both inner and outer rings for the Double Ring burner are lit Figure 11 Once lit turn the control counterclockwise and adjust to the desired flame size 3 When adjusting for a low or simmer type flame setting continue to rotate the control knob counterclockwise from HI setting towards LO Figure 12 When the knob is turned close enough towards the LO setting the flame for the outer ring portion of the burner will turn off leaving only the inner burner with a flame for simmering Figure 11 Make any further flame adjustments as needed JF 7 Figure 12 Setting the double ring burner 14 Dual burner head some models Burner cap p Burner cap lip E ee ee ee ee Burner head
72. r flammable vapors and liquids in the vicinity of this or any other appliance WHAT TO DO IF YOU SMELL GAS e Do not try to light any appliance e Do not touch any electrical switch e Do not use any phone in your building e Immediately call your gas supplier from a neighbor s phone Follow the gas supplier s instructions e If you cannot reach your gas supplier call the fire department e Installation and service must be performed by a qualified installer servicer or the gas supplier IMPORTANT SAFETY INSTRUCTIONS WARNING Tip Over Hazard A e A child or adult can tip the appliance and be killed e Verify the device is engaged with the countertops or that the device has been installed to the walls of the cabinet the wall or the floor as per the installation instructions e Ensure the anti tip device is re engaged with the countertop the walls of the cabinet the wall or the floor as per the installation instructions when the appliance is moved e Do not operate the appliance without the anti tip device in place and engaged e Failure to follow these instructions can result in death or serious burns to children and adults To check if the anti tip NS bracket is installed properly use both arms to grasp the D rear edge of the appliance back Carefully attempt to tilt appliance forward When properly installed the appliance should not tilt forward Refer to the anti tip bracket ins
73. r the oven has cooled down for about 1 HOUR door OPn will appear and the word DOOR and the f icon will flash until the door is unlocked The oven door can then be opened and the timer will revert back to the time of day amp NOTE e When self clean is active you may check the time remaining by pressing the Self Clean once The remaining time will appear in the display momentarily before reverting back to the time of day e If your clock is set with the default 12 hr display mode the Delay Start for a Self Clean can only be programmed to start up to 11 hours and 59 minutes after the time showing in the display be sure to set the clock to current time before programming a delay start To set a Delay Start Self Clean to begin 12 or more hours maximum is 23 hours and 59 minutes after the time of setting be sure to first set the control in the 24 Hr display mode e If Self Clean was active and then interrupted by a power failure or cancelled before the oven was thor oughly cleaned it may be necessary to run another Self Clean cycle e f the oven temperature was high enough when Self Clean was interrupted the oven control may not allow another Self Clean cycle to be set for up to 4 hours Setting a Delay Start Self Clean Cycle The self clean and delay start keys control the delayed self clean operation The automatic timer will turn the oven on and off at the time you select in advance amp NOTE If your clock is set
74. red change For example for 30 F press 3 0 The temperature may be increased as much as 35 F 19 C 3 Press start to accept the temperature change and the display will return to the time of day Press off to reject the change if necessary To adjust the oven temperature lower 1 Press bake for 6 seconds The display will show UPO 0 2 To decrease the temperature use the number keys to enter the desired change Example 30 F 3 0 Then press self clean The temperature may be decreased as much as 35 F 19 C 3 Press start to accept the temperature change and the display will return to the time of day Press off to reject the change if necessary amp NOTE The oven temperature adjustments made with this feature will not change the self clean cycle temperature or the broil temperature The oven temperature adjustments are permanent and will stay in the unit memory unless you manually change it again or if all the controls are reset Even a power outage will not reset these changes Follow the same procedure again if you wish to change it toa different setting or use the Restoring Factory Default Setting instructions on page 34 to restore settings to their defaults Setting the Sabbath Feature For use on the Jewish Sabbath and Holidays The bake time and start keys are used to set the Sabbath feature For further assistance guidelines for proper usage and a complete list of models with the Sabbath feature
75. resent call a service technician to replace your cooling fan Convection fan does not rotate Oven door is open Convection fan will turn off if oven door is opened when Convection is active Close oven door Self Clean does not work Oven control not set properly Review instructions in Self Clean section Surface burners do not ignite Surface control knob was not completely turned to Lite Push in and turn the surface control knob to Lite until burner ignites and then turn control knob to desired flame size Burner ports are clogged With the burner OFF use a small gauge wire or needle to burner head slots and ignition ports Range power cord is disconnected from outlet electric ignition models only Be sure power cord is securely plugged into the power outlet Electrical power outage Burners may be lit manually See Operating the gas surface controls on page page 12 Surface burner flame uneven or only part way around the burner cap Burner slots or ports are clogged With the surface burner OFF clean ports with a small gauge wire or needle Moisture is present after cleaning Lightly fan the flame and allow burner to operate until flame is full Burner caps are not seated properly Check that all burner caps are level and seated correctly on burner heads Surface burner flame is too high 46 Surface control knob is set too high Adjust to lower flame setting Burner caps are not seated pr
76. s cooking poaching and stewing a Correct Incorrect Figure 9 Gas flame adjustment md IMPORTANT Never extend the flame beyond the outer edge of the utensil A higher flame simply wastes heat and energy and increases the risk of being burned by the gas flame Da In the event of an electrical power outage the surface Figure 8 amp Gas knob LITE position burners can be lit manually To light a surface burner hold a lit match to the burner head then slowly turn the surface control knob to LITE After burner lights turn the knob to desired setting amp NOTE Settings based on using medium weight metal or aluminum pans Settings may vary using other types of pans The color of the flame is key to proper burner adjustment A good flame is clear blue and hardly visible in a well lighted room Each cone of the flame should be steady and sharp Clean burner if flame is yellow orange 12 Setting Surface Controls Your gas appliance may be equipped with different sized surface burners The ability to heat food quicker and in larger volumes increases as the burner size increases It is important to select cookware that is suitable for the amount and type of food being prepared The smaller SIMMER burner on some models is best suited for simmering delicate sauces etc The standard size burners may be used for most surface cooking needs Some models are equipped with a center burner The larger POWER burn
77. s mode is best for meats fish and poultry up to 1 thick Broiling cooks by direct heat The broil key controls the broil feature An optional searing grill broiler pan and insert are available via the enclosed accessories brochure See Figure 28 The oven can be programmed to broil at any temperature from 400 F to 550 F with a default tempera ture of 550 F A WARNING If an oven fire occurs do not open the oven door turn the oven off If the fire continues use a fire extinguisher Do not put water or flour on the fire Flour may be explosive Always broil with oven door closed The broiler pan and the insert some models allow grease to drain and be kept away from the high heat of the broiler Do not use the pan without the insert Do not cover the insert with aluminum foil the exposed grease could ignite Use oven mitts when handling cookware Figure 27 Broil rack positions Broiling tips e For optimum browning preheat the broil element for 2 minutes Broil one side until the food is browned turn and cook on the second side Season and serve Table 1 Broiling recommendations e If using a searing grill preheat oven 5 to 10 minutes before grilling To set a broil of 500 F 1 Place the broiler pan insert on the broiler pan and place the food on the broiler pan insert 2 Arrange the interior oven rack and place the broiler pan on the rack Center the broiler pan directly under the broiler element Preheat
78. t any time Bake broil and convection elements will cycle for better heat distribution and faster and more even cooking Important Do not open the oven door often Opening the door will reduce the temperature in the oven and may increase the cooking time necessary for best results 26 Setting Convection Broil some models Use this mode for thicker cuts of meat fish and poultry The convection broiling gently browns the exterior and seals in the juices Convection broiling uses the broil element and a fan to circulate the oven s heat evenly and continuously within the oven The oven can be programmed for convection and normal broiling at any temperature between 400 F to 550 F with a default temperature of 550 F See Table 1 To set a convection broil temperature of 500 F 1 Arrange oven racks first Press convect The display will show 350 and convect and bake will flash 2 Press convect two more times The display will show 550 and convect and broil will flash 3 Press 5 0 0 using numeric keys Press start 500 CONVECT BROIL and the fan icon will show in the display 6 Allow oven to preheat for 2 minutes then place food in the oven amp NOTE The preheat tone will not sound for this feature When broiling in the upper rack positions use the offset rack if available Convection broiling tips e For optimum browning preheat the broil element for 2 minutes Always pull the rack out to the stop
79. tallation instructions supplied with your range for proper installation A WARNING e Do Not Leave Children Alone Children should not be left alone or unattended in the area where appliance is in use They should never be allowed to sit or stand on any part of the appli ance including the storage drawer lower broiler drawer warmer drawer or lower double oven e Stepping leaning or sitting on the door or drawers of a oven can result in serious injuries and also cause damage to the appliance Do not allow children to climb or play around the oven The weight of a child on an open over door may cause the oven to tip resulting in serious burns or other injury e Never cover any slots holes or passages in the oven bottom or cover an entire oven rack with materials such as aluminum foil Aluminum foil linings may trap heat causing a fire hazard md IMPORTANT Important Safety Notice The California Safe Drinking Water and Toxic Enforcement Act requires the governor of California to publish a list of substances known to cause cancer birth defects or other reproductive harms and requires businesses to warn customers of potential exposures to such substances Cold temperatures can damage the electronic control When using this appliance for the first time or when the appliance has not been used for an extended period of time be sure the appliance has been in temperatures above 32 F 0 C for at least 3 hours before
80. the burner slots using a small nonabrasive brush like a toothbrush and wipe up using a damp cloth For stubborn soils located in the slots use a small gauge wire or needle to clean The electrode must be carefully cleaned Take care not to hit the electrode with any thing hard or it could be damaged To clean the burner head ignition ports Each burner head has a small ignition port Figure 42 Should you experience ignition problems it may be that this port hole is partially blocked with soil With the burner head in place use a small wire gauge needle or the end of a paper clip to clear the ignition port CARE AND CLEANING ignition port slots ie TP orifice port Figure 42 Gas burner head parts Replacing the oven light A CAUTION Be sure the oven is unplugged and all parts are cool before replacing oven light The interior oven lights are located at the rear of the oven cavity and are covered with a glass shield Replacing the oven interior light bulb 1 Turn electrical power off at the main source or unplug the appliance 2 Remove interior oven light shield by turning a quarter turn Replace bulb with a new T 4 type Halogen 25 watt appliance bulb amp NOTE Do not allow your fingers to touch the new bulb when replacing This will shorten the life of the bulb Use a paper towel or cotton glove while handling the new bulb when installing Replace glass oven light shield Turn power back on aga
81. the service life of your new appliance We view your purchase as the beginning of a relationship To ensure our ability to continue serving you please use this page to record important product information Need Help Visit the Frigidaire web site at www frigidaire com Before you call for service there are a few things you can do to help us serve you better Read this Use amp Care Manual This manual contains instructions to help you use and maintain your range properly If You Received a Damaged Range Immediately contact the dealer or builder that sold you the range Save Time and Money Check the section title Before You Call This section helps step you through some common problems that might occur If you do need service help is only a phone call away Call Frigidaire Customer Services at 1 800 944 9044 Product Registration Registering your product with Frigidaire enhances our ability to serve you Register online at www frigidaire com or by dropping your Product Registration Card in the mail Record model amp serial numbers here Purchase Date Frigidaire model number Frigidaire serial number Serial Plate Location Left side of oven frame All rights reserved Printed in the USA IMPORTANT SAFETY INSTRUCTIONS CAUTIONS AND WARNINGS Read all instructions before using this appliance This manual contains important safety symbols and instructions Please pay attention to these symb
82. turning on the power to the appliance Do not attempt to operate the oven during a power failure If the power fails always turn off the oven If the oven is not turned off and the power resumes the oven will begin to operate again Once the power resumes reset the clock and oven function IMPORTANT SAFETY INSTRUCTIONS A CAUTION When heating fat or grease watch it closely Grease may catch fire if it becomes too hot Do not use water or flour on grease fires Smother fire or flame or use a dry chemical or foam type extinguisher Cover the fire with a pan lid or use baking soda Use dry potholders Moist or damp potholders on hot surfaces may result in burns from steam Do not let potholders touch hot cooking areas Do not use towels or other bulky cloths Do not heat unopened food containers Build up of pressure may cause container to burst and result in injury Wear proper apparel Loose fitting or hanging garments should never be worn while using the appliance Do not touch heating elements or interior surfaces of oven Heating elements may be hot even though they are dark in color Interior surfaces of an oven become hot enough to cause burns During and after use do not touch or let clothing or other flammable materials contact heating elements or interior surfaces of oven until they have had sufficient time to cool Other surfaces of the appliance may become hot enough to cause burns among these surfaces are i
83. uide USDA Rev June 1985 Visit the USDA Food Safety and Inspection website at www fsis usda gov 32 Setting Warmer Drawer some models To Operate the Warmer Drawer A CAUTION Your range may be equipped with a warm drawer The purpose of the warm drawer is to keep hot cooked foods at serving temperature Always start with hot food It is not recommended to heat cold food in the warmer drawer All food placed in the warmer drawer should be covered with a lid or aluminum foil to maintain quality Do not cover crisp foods Do not use plastic wrap to cover food Plastic may melt onto the drawer and be very difficult to clean Use only dish ware utensils and cookware recom mended for oven use in the warmer drawer Always use potholders or oven mitts when removing food from the warmer drawer as cookware and plates will be hot To set the warmer drawer 1 Press the warmer drawer key Figure 35 The warmer drawer indicator light will turn on Press temp to reach the desired setting The tempera tures are approximate and are designated by LO MED and HI with varying degrees of heat The indicator light will turn on and will remain on showing the selected heat setting To turn the warmer drawer off press warmer drawer The warmer drawer indicator light and the selected setting indicator light will turn off hi m med amp lo m temp a warmer drawer on o a Figure 35 Warmer dra
84. ut the oven will continue to cook If the probe is removed from the food only the probe feature will remain active and may eventually generate a probe too hot message To change the target temperature while cooking press the probe key once Use the numeric keys to change the temperature Press the start key to accept any change 31 OVEN CONTROLS Table 2 cooking temperatures Food Type USDA recommended minimum internal Internal Temp Ground meat and meat mixtures Beef Pork Veal Lamb 160 F 71 C Turkey Chicken 165 F 74 C Fresh beef veal lamb Medium rare 145 F 63 C Medium 160 F 71 C Well Done 170 F 77 C Poultry Chicken and Turkey whole 165 F 74 C Poultry Breasts Roasts 165 F 74 C Poultry Thighs Wings 165 F 74 C Duck and Goose Stuffing cooked alone or in bird 165 F 74 C Fresh Pork 165 F 74 C 160 F 71 C Ham Fresh raw 160 F 71 C Pre cooked to reheat 140 F 60 C Eggs and egg dishes Eggs Cook until yolk and white are firm Eggs dishes 160 F 71 C Leftovers and Casseroles 165 F 74 C The U S Department of Agriculture states Rare fresh beef is pop ular but you should know that cooking it to only 140 F 60 C means some food poisoning organisms may sur vive Source Safe Food Book Your Kitchen G
85. wer control A CAUTION Food Poisoning Hazard Do not let food sit for more than one hour before or after cooking Doing so can result in food poisoning or sickness Foods that can easily spoil such as milk eggs fish meat or poultry should be chilled in the refrigerator first Even when chilled they should not stand in the oven for more than 1 hour before cooking begins and should be removed promptly when finished cooking Warmer Drawer Temperature Selection Refer to the chart below for recommended settings If a particular food is not listed start with the medium setting If more crispness is desired remove the lid or aluminum foil Most foods can be kept at serving temperatures by using the medium setting When a combination of foods are to be kept warm for instance a meat with 2 vegetables and rolls use the high setting Refrain from opening the warmer drawer while in use to eliminate loss of heat from the drawer To Warm Serving Bowls and Plates Heat bowls and plates on the LO setting Place empty dishes on the rack to raise them off drawer bottom To further heat dishes or to heat fine china check with the manufacturer for maximum heat tolerance IMPORTANT The warmer drawer will turn off automatically when the oven is in a self cleaning mode The warmer drawer can be used immediately after the clean cycle is ended Warmer Drawer Recommended Temperature Settings Food item Setting
86. wo settings Lo 225 F 108 C and Hi 275 F 135 C Both settings can be used with the following options e Bake time e Bake time with delay start A WARNING Food poisoning hazard do not let food sit for more than one hour before or after cooking Doing so may result in food borne illness Slow cook tips e Slow cooking meats may result in the outside of the meat turning dark this is normal Completely thaw all frozen foods before cooking Preheating the oven is not necessary e When using a single oven rack place in oven rack so food is centered in oven Position multiple racks to accommodate size of cooking utensils when cooking multiple food items e Add any cream or cheese sauces during the last hour of cooking e Do not frequently open the oven door or leave the oven door open when checking food items The more heat that is lost the longer the food will need to cook e Cover foods to keep them moist or use a loose or vented cover to allow foods to turn crisp or brown Roasts may be left uncovered so browning can occur Cook times will vary depending on the weight fat content bone and the shape of the roast To set slow cook 1 Position oven racks and cookware in oven Close the oven door Press slow cook some models HI will appear in the oven display indicating the default setting is for high heat If a low setting is needed press slow cook again to select the LO setting and release Press start

Frigidaire FGDS3065PF Use and Care Manual

Contents

Download Pdf Manuals

Related Search

Related Contents