Builders Edge 060010637001 Installation Guide
Contents
1. 6 Window Header Header Installation Instructions Kit Contains 1 pc Window Header 1 pc Window Header Base 12 pcs Shutter Loks screws quantity is dependent on header length Window Header Base Window Header Step 1 Begin by removing the Window Header from the Window Header Base This can be accomplished by disengaging the locking tabs Figure 1 at right shows the location of these tabs Note Depending on the size of your Window Header Kit there may be more or less locking tabs To release the locks start in the middle of the Header Assembly and pull the wall of the Header away from the Header Base Continue this process working your way to the ends of the Window Header Assembly Step 2 Draw horizontal line 1 8 Remove the Window Header from the Window Header Base by above window trim disengaging the lock tabs See Figure above Drawa horizontal line 1 8 above the window trim This line will be used to properly space the Window Header from the window trim See Figure 2 at right 01 24 01 PAPC9166 1 0055 Step 3 Center the Window Header Base over the window and spaced 1 8 above the window trim Use the elongated slots in the Header oN Base and attach the base to the house using AIP the screws provided Alternatively the Hae preferred method is to use Shutter Loks a The raised portions of the Header Base with the round holes receive the Shutter Loks W Attach Shutter Loks by drilling 1 4 ho2. les into W the wall Be sure not to fasten the screws or o Shutter Loks too tightly to allow for expansion and contraction See Figures 3A and 3B at right Screw Application Shutter Lok Application Length Min of screws 4358 8 Note CORRECT INCORRECT Figures 4A amp 4B at right show cross sections of the Window Header in place In some instances the Window Header may rock on the high point of the siding To overcome this problem insert the screws or Shutter Loks into the wall evenly See Figure 4A at right Insert the screws or Shutter Loks evenly working between top and bottom Step 4 With the Window Header Base securely fastened to the wall attach the Window Header by snapping it into place See Figure 5 at right
Download Pdf Manuals
Related Search