OWT Ornamental Wood Ties 56645 Installation Guide
Contents
1. Www OZCOBuildingProducts com 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs Truss Base Fan 10 12 Truss Tie Item 56620 Kit Includes 1 Truss Base Fan 10 12 a Number of Truss Accent Kits Required 2 5 Sold Separately e Truss Tie For Truss Roof Pitch 10 12 e Designed For Connection Material gt 5 7 e Truss Accents Lag Bolts amp Hex Cap Nuts Sold Separately e 3 16 Thick Galvanized amp Power Coated Steel www OZCOBuildingProducts com patent pending Truss Base Fan 10 12 criss Truss Tie Installation Guide General Guidelines e Materials are heavy and bulky minimum of 2 people are required for most installations e Brace and tie off large beams and posts until all connections are made e Wear proper safety equipment e Check with local authorities and home owners association before construction e Check for underground and or hidden utilities that could be damaged e Be sure to use the right tool for the job e Plan ahead and have the required hardware fasteners and tools close at hand before starting the installation Steps 1 Locate the plate in the correct location 2 Aclamp or similar device can be helpful to keep all parts tight and in place 3 Remove threaded covers from all Hex Cap Nuts a Insert Lag Bolts into Cap Nuts b OWT Lag Bolts require a 3 8 Hex Bit 4 Position the Truss Accent on the truss plate and attach with lag bolts2. bane a e 07 60 BUILDING PRODUCTS www OZCOBuildingProducts com 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs 6x6 Post Base Laredo Sunset Item 56608 Replacement Parts Kit Includes 1 Post Base a 4 Decorative Plates b 8 Hex Cap Nuts c 8 2 Lag Bolts d e Adjustable 5 Up To 6 Sq e Base Elevates Post From Ground Contact e Flexible Mounting Options e Post Attachment Hardware Included e 3 16 Thick Galvanized amp Power Coated Steel www OZCOBuildingProducts com patent pending 6x6 Post Base w Laredo Sunset Installation Guide General Guidelines e Materials are heavy and bulky minimum of 2 people are required for most installations e Brace and tie off large beams and posts until all connections are made e Wear proper safety equipment e Check with local authorities and home owners association before construction e Check for underground and or hidden utilities that could be damaged e Be sure to use the right tool for the job e Plan ahead and have the required hardware fasteners and tools close at hand before starting the installation Steps 1 Locate and Level the base plate 2 Mount base plate 3 If adding an accent medallion drill all holes in the decorative plates using 3 16 drill bit Locate tip of drill bit on dimple 4 Remove threaded covers from all Hex Cap Nuts a Insert Lag Bolts into Cap Nuts b 3 8 Hex Bit
3. 5 Repeat for all hardware locations 6 Replace Threaded Covers until flush with edge of the nut 7 HINT Use tread lock on Threaded Covers in accessible areas Use and Care This hardware may not be suitable for every situation or installation application A design professional should be consulted to ensure the specific installation application meets local building code requirements If hardware becomes dirty clean with soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt or salt water bane a e 07 60 BUILDING PRODUCTS O I Www OZCOBuildingProducts com 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs Star 23s OD Ornamental Hardware Item 56623 HLL i Replacement Parts Kit Includes 10 2 OD Star a 10 6 x 13 4 Wood Screw b e 2 Od Decorative Star With Center Hole e Aluminum Casting Powder Coated Black www OZCOBuildingProducts com patent pending Star 27 OD wns Ornamental Hardware Installation Guide Steps 1 Position star in desired location 2 Check to make sure that screw is not too long for your installation location 3 Tighten screw Use and Care This hardware may not be suitable for every situation or installation application A design professional should be consulted to ensure the specific installation application meets local b
4. 2 Butt Joint Plates a Number of Truss Accent Kits Required 2 Sold Separately e Truss Tie For Butt Joint e Designed For Connection Material gt 5 72 e Truss Accents Lag Bolts amp Hex Cap Nuts Sold Separately e 3 16 Thick Galvanized amp Power Coated Steel www OZCOBuildingProducts com patent pending Butt Joint Plate Truss Tie Installation Guide General Guidelines e Materials are heavy and bulky minimum of 2 people are required for most installations e Brace and tie off large beams and posts until all connections are made e Wear proper safety equipment e Check with local authorities and home owners association before construction e Check for underground and or hidden utilities that could be damaged e Be sure to use the right tool for the job e Plan ahead and have the required hardware fasteners and tools close at hand before starting the installation Steps 1 Locate the plate in the correct location 2 Aclamp or similar device can be helpful to keep all parts tight and in place 3 Remove threaded covers from all Hex Cap Nuts a Insert Lag Bolts into Cap Nuts b OWT Lag Bolts require a 3 8 Hex Bit 4 Position the Truss Accent on the truss plate and attach with lag bolts 5 Repeat for all hardware locations 6 Replace Threaded Covers until flush with edge of the nut 7 HINT Use tread lock on Threaded Covers in accessible areas Use and Care This hardware may not be suitable for every s
5. 3 Remove threaded covers from all Hex Cap Nuts a Insert Lag Bolts into Cap Nuts b OWT Lag Bolts require a 3 8 Hex Bit 4 Position the Truss Accent on the truss plate and attach with lag bolts 5 Repeat for all hardware locations 6 Replace Threaded Covers until flush with edge of the nut 7 HINT Use tread lock on Threaded Covers in accessible areas Use and Care This hardware may not be suitable for every situation or installation application A design professional should be consulted to ensure the specific installation application meets local building code requirements If hardware becomes dirty clean with soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt or salt water bane a e 07 60 BUILDING PRODUCTS O I Www OZCOBuildingProducts com 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs Truss Base Fan 8 12 Truss Tie Item 56619 Replacement Parts Kit Includes 1 Truss Base Fan 8 12 a Number of Truss Accent Kits Required 2 5 Sold Separately e Truss Tie For Truss Roof Pitch 8 12 e Designed For Connection Material gt 5 7 e Truss Accents Lag Bolts amp Hex Cap Nuts Sold Separately e 3 16 Thick Galvanized amp Power Coated Steel www OZCOBuildingProducts com patent pending Truss Base Fan 8 12 nss Truss Tie Installation Guide General
6. OWT Truss Ties e Includes 4 Hex Cap Nuts Lag Bolts Sold Separately e 3 16 Thick Galvanized amp Power Coated Steel www OZCOBuildingProducts com patent pending Truss Accent sense Laredo Sunset Installation Guide General Guidelines e Materials are heavy and bulky minimum of 2 people are required for most installations e Brace and tie off large beams and posts until all connections are made e Wear proper safety equipment e Check with local authorities and home owners association before construction e Check for underground and or hidden utilities that could be damaged e Be sure to use the right tool for the job e Plan ahead and have the required hardware fasteners and tools close at hand before starting the installation Steps Locate the tabs of the Truss Accent with the truss plate Remove threaded covers from all Hex Cap Nuts Insert Lag Bolts sold separately into Cap Nuts OWT Lag Bolts require a 3 8 Hex Bit Install the lag bolts Replace Threaded Covers until flush with edge of the nut HINT Use tread lock on Threaded Covers in accessible areas NOORWN Note Truss Accents are intended to be used in conjunction with OWT Truss Plates Use in any other manner is not recomme Use and Care This hardware may not be suitable for every situation or installation application A design professional should be consulted to ensure the specific installation application meets local building code
7. Use the HIGH holes on both sides c Be sure that both plates are evenly spaced on both sides of base plate d If adjustment is necessary use RUBBER hammer to position 6 Attach the opposite side plates using LOWER holes Pro Technique If installing the post base close to an obstruction install a Decorative Plate to the post on an accessible side Once the plate is installed dislodge the Decorative Plate from the base and rotate the post so the installed plate is facing the obstruction Use and Care This hardware may not be suitable for every situation or installation application A design professional should be consulted to ensure the specific installation application meets local building code requirements If hardware becomes dirty clean with soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt or salt water bn a 07 60 BUILDING PRODUCTS O O Www OZCOBuildingProducts com 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs Post To Beam 2 Laredo Sunset Item 56610 Replacement Parts Kit Includes 2 Post Ledge Base a 8 Hex Cap Nuts c 2 Top Cover Plates b 4 3 Lag Bolts d 4 2 Lag Bolts e e 2 Piece Design Allows The Base To Be Mounted Before Beam Is Positioned e Accommodates Beams Up To 1 Thick Without Dado 4 Thick Beams Require 2 Dado e Includes Hardware For Stand
8. and Marketing by LiquidFly Designs 112 Hex Cover Nut Ornamental Hardware Item 56621 Kit Includes 10 Hex Cap Nuts a Replacement Parts Decorative Hardware Conceals Lag Screws e Lag Screws Sold Separately www OZCOBuildingProducts com patent pending 112 Hex Cover Nut ee Ornamental Hardware Installation Guide Steps 1 Remove threaded covers from all Hex Cap Nuts 2 Insert Lag Bolts into Cap Nut 3 OWT Lag Bolts require a 3 8 Hex Bit 4 Replace Threaded Covers until flush with edge of the nut 5 HINT Use tread lock on Threaded Covers in accessible areas Use and Care This hardware may not be suitable for every situation or installation application A design professional should be consulted to ensure the specific installation application meets local building code requirements If hardware becomes dirty clean with soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt or salt water DENER e 07 60 BUILDING PRODUCTS O I Www OZCOBuildingProducts com 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs Hammered Dome Cap Nut Ornamental Hardware Item 56622 Replacement Parts Kit Includes 10 Hammered Dome Cap Nuts a Decorative Hardware Conceals Lag Screws e Aluminum Casting e Powder Coated Black e Lag Screws Sold Separate
9. c Replace Threaded Covers until flush with edge of the nut d HINT Use tread lock on Threaded Covers in accessible areas 5 Center the wooden Post on Base Plate If installing with an obstruction see Pro Technique below a Attach Decorative plates on opposite sides b Use the HIGH holes on both sides c Be sure that both plates are evenly spaced on both sides of base plate d If adjustment is necessary use RUBBER hammer to position 6 Attach the opposite side plates using LOWER holes Pro Technique If installing the post base close to an obstruction install a Decorative Plate to the post on an accessible side Once the plate is installed dislodge the Decorative Plate from the base and rotate the post so the installed plate is facing the obstruction Use and Care This hardware may not be suitable for every situation or installation application A design professional should be consulted to ensure the specific installation application meets local building code requirements If hardware becomes dirty clean with soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt or salt water DERE 07 0 UED enO O AAT S ERa 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs 8x8 Post Base Laredo Sunset Item 56609 Ornamental Wood Ties Replacement Parts Kit Includes l Post Base a a Ti Decor
10. requirements If hardware becomes dirty clean with soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt or salt water Corresponding Products The Number of Truss Accent Kits Required Is Indicated By The Number Next To This Icon 90 Flush Inside 2 45 Flush Inside 2 90 Flush Outside 2 Butt Joint 2 Item 56615 Item 56611 Item 56614 Item 56613 T Tie Plate 3 Truss Base Fan 8 12 2 5 Truss Base Fan 10 12 2 5 Item 56612 a Item 56619 Item 56620 atman oy o EUDANN 1 1 BUILDING PRODUCTS O O AAT e ERa 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs T Tie Plate Truss Tie Item 56612 Kit Includes 2 T Tie Plates a Number of Truss Accent Kits Required 3 Sold Separately e Truss Tie For 90 Deg T Joint e Designed For Connection Material gt 5 2 e Truss Accents Lag Bolts amp Hex Cap Nuts Sold Separately e 3 16 Thick Galvanized amp Power Coated Steel www OZCOBuildingProducts com patent pending Truss Accent ens Truss Tie Installation Guide General Guidelines e Materials are heavy and bulky minimum of 2 people are required for most installations e Brace and tie off large beams and posts until all connections are made e Wear proper safety equipment e Check with loc
11. Guidelines e Materials are heavy and bulky minimum of 2 people are required for most installations e Brace and tie off large beams and posts until all connections are made e Wear proper safety equipment e Check with local authorities and home owners association before construction e Check for underground and or hidden utilities that could be damaged e Be sure to use the right tool for the job e Plan ahead and have the required hardware fasteners and tools close at hand before starting the installation Steps 1 Locate the plate in the correct location 2 Aclamp or similar device can be helpful to keep all parts tight and in place 3 Remove threaded covers from all Hex Cap Nuts a Insert Lag Bolts into Cap Nuts b OWT Lag Bolts require a 3 8 Hex Bit 4 Position the Truss Accent on the truss plate and attach with lag bolts 5 Repeat for all hardware locations 6 Replace Threaded Covers until flush with edge of the nut 7 HINT Use tread lock on Threaded Covers in accessible areas Use and Care This hardware may not be suitable for every situation or installation application A design professional should be consulted to ensure the specific installation application meets local building code requirements If hardware becomes dirty clean with soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt or salt water bane a e 07 60 BUILDING PRODUCTS O I
12. al authorities and home owners association before construction e Check for underground and or hidden utilities that could be damaged e Be sure to use the right tool for the job e Plan ahead and have the required hardware fasteners and tools close at hand before starting the installation Steps 1 Locate the plate in the correct location 2 Aclamp or similar device can be helpful to keep all parts tight and in place 3 Remove threaded covers from all Hex Cap Nuts a Insert Lag Bolts into Cap Nuts b OWT Lag Bolts require a 3 8 Hex Bit Position the Truss Accent on the truss plate and attach with lag bolts Repeat for all hardware locations Replace Threaded Covers until flush with edge of the nut 7 HINT Use tread lock on Threaded Covers in accessible areas oak Use and Care This hardware may not be suitable for every situation or installation application A design professional should be consulted to ensure the specific installation application meets local building code requirements If hardware becomes dirty clean with soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt or salt water bane a e 07 60 BUILDING PRODUCTS O I Www OZCOBuildingProducts com 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs Butt Joint Plate Truss Tie Item 56613 Replacement Parts Kit Includes
13. ard 2 Beam Installations e 3 16 Thick Galvanized amp Power Coated Steel www OZCOBuildingProducts com patent pending Post To Beam 2 usss Laredo Sunset Installation Guide General Guidelines e Materials are heavy and bulky minimum of 2 people are required for most installations e Brace and tie off large beams and posts until all connections are made e Wear proper safety equipment e Check with local authorities and home owners association before construction e Check for underground and or hidden utilities that could be damaged e Be sure to use the right tool for the job e Plan ahead and have the required hardware fasteners and tools close at hand before starting the installation Steps 1 Measure and mark the post at the location where the BOTTOM edge of the beam will be 2 If adding an accent medallion drill all holes in the decorative plates using 3 16 drill bit Locate tip of drill bit on dimple 3 Remove threaded covers from all Hex Cap Nuts a Insert Lag Bolts into Cap Nuts b OWT Lag Bolts require a 3 8 Hex Bit c Replace Threaded Covers until flush with edge of the nut d HINT Use tread lock on Threaded Covers in accessible areas 4 Attach angled base to post with the shorter lag screws assuring that it is mounted level 5 Rest beam on Angle Base and position the Cover Plate so the tabs on the Angle Base engage with the Cover Plate a If attaching 4 beam to post you must dado the post 2 with s
14. ative Plates b Hex Cap Nuts c E e Adjustable 7 2 Up To 8 Sq e Base Elevates Post From Ground Contact e Flexible Mounting Options e Post Attachment Hardware Included e 3 16 Thick Galvanized amp Power Coated Steel www OZCOBuildingProducts com patent pending 8x8 Post Base tienes Laredo Sunset Installation Guide General Guidelines e Materials are heavy and bulky minimum of 2 people are required for most installations e Brace and tie off large beams and posts until all connections are made e Wear proper safety equipment e Check with local authorities and home owners association before construction e Check for underground and or hidden utilities that could be damaged e Be sure to use the right tool for the job e Plan ahead and have the required hardware fasteners and tools close at hand before starting the installation Steps 1 Locate and Level the base plate 2 Mount base plate No image necessary 3 If adding an accent medallion drill all holes in the decorative plates using 3 16 drill bit Locate tip of drill bit on dimple 4 Remove threaded covers from all Hex Cap Nuts a Insert Lag Bolts into Cap Nuts b 3 8 Hex Bit c Replace Threaded Covers until flush with edge of the nut d HINT Use tread lock on Threaded Covers in accessible areas 5 Center the wooden Post on Base Plate If installing with an obstruction see Pro Technique below a Attach Decorative plates on opposite sides b
15. aw b WARNING lag screws provided with the 2 Post to Beam kit are not long enough for 4 installations 6 Attach Cover Plate with lag bolts 7 Install Decorative Medallion Use and Care This hardware may not be suitable for every situation or installation application A design professional should be consulted to ensure the specific installation application meets local building code requirements If hardware becomes dirty clean with soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt or salt water bane a e 07 60 BUILDING PRODUCTS O I Www OZCOBuildingProducts com 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs Rafter Clips 2 Laredo Sunset Item 56617 Replacement Parts Kit Includes 10 2 Rafter Clips a 20 10x1 hex screws b UT ah Ba TTT Ks e Attractive Sturdy Angle Bracket Can Be Used In A Wide Range Of Projects e Decorative Bracket Cutout Makes Exact Location Easy To Establish e Offset Hole Pattern For Unobstructed Back To Back Mounting e Includes Hardware For Attaching 2 Rafters e Galvanized amp Power Coated 12 Ga Steel www OZCOBuildingProducts com patent pending Rafter Clips 2 ssr Laredo Sunset Installation Guide General Guidelines e Materials are heavy and bulky minimum of 2 people are required for most installations e Brac
16. e and tie off large beams and posts until all connections are made e Wear proper safety equipment e Check with local authorities and home owners association before construction e Check for underground and or hidden utilities that could be damaged e Be sure to use the right tool for the job e Plan ahead and have the required hardware fasteners and tools close at hand before starting the installation Steps 1 Measure along beam and make vertical 72 long vertical marks from top edge of beam 2 Position the Rafter Clip so that the bend is flush with top of the beam and the point of the diamond shaped cut out is centered on the marks 3 Install screw into the beam 4 Repeat for all other rafter locations 5 Center the rafter on the beam and Rafter Clip 6 Install screw into rafter Pro Technique If the installation requires the brackets to be mounted on both sides of the same board be sure to inspect the brackets to orientate the holes so the attachment hardware does not collide NOTE The fastener holes are offset on each bracket Use and Care This hardware may not be suitable for every situation or installation application A design professional should be consulted to ensure the specific installation application meets local building code requirements If hardware becomes dirty clean with soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt o
17. h soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt or salt water bane a e 07 60 BUILDING PRODUCTS O I Www OZCOBuildingProducts com 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs 45 Flush Inside Truss Tie Item 56611 Kit Includes 2 Flush Inside 45 Deg Plates a Number of Truss Accent Kits Required 2 Sold Separately e Truss Tie For 45 Deg Inside Joint e Designed For Connection Material gt 5 2 e Truss Accents Lag Bolts amp Hex Cap Nuts Sold Separately e 3 16 Thick Galvanized amp Power Coated Steel www OZCOBuildingProducts com patent pending 45 Flush Inside e Truss Tie Installation Guide General Guidelines e Materials are heavy and bulky minimum of 2 people are required for most installations e Brace and tie off large beams and posts until all connections are made e Wear proper safety equipment e Check with local authorities and home owners association before construction e Check for underground and or hidden utilities that could be damaged e Be sure to use the right tool for the job e Plan ahead and have the required hardware fasteners and tools close at hand before starting the installation Steps 1 Locate the plate in the correct location 2 Aclamp or similar device can be helpful to keep all parts tight and in place
18. have the required hardware fasteners and tools close at hand before starting the installation Steps 1 Locate the plate in the correct location 2 Aclamp or similar device can be helpful to keep all parts tight and in place 3 Remove threaded covers from all Hex Cap Nuts a Insert Lag Bolts into Cap Nuts b OWT Lag Bolts require a 3 8 Hex Bit 4 Position the Truss Accent on the truss plate and attach with lag bolts 5 Repeat for all hardware locations 6 Replace Threaded Covers until flush with edge of the nut 7 HINT Use tread lock on Threaded Covers in accessible areas Use and Care This hardware may not be suitable for every situation or installation application A design professional should be consulted to ensure the specific installation application meets local building code requirements If hardware becomes dirty clean with soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt or salt water bane a e 07 60 BUILDING PRODUCTS O I Www OZCOBuildingProducts com 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs 90 Flush Inside Truss Tie Item 56615 Kit Includes 2 Flush Inside 90 Deg Plates a Number of Truss Accent Kits Required 2 Sold Separately e Truss Tie For 90 Deg Inside Joint e Designed For Connection Material gt 5 72 e Truss Accents Lag Bolts a
19. iamond shaped cut out is centered on the marks 3 Remove threaded covers from all Hex Cap Nuts a Insert Lag Bolts into Cap Nuts b OWT Lag Bolts require a 3 8 Hex Bit c Replace Threaded Covers until flush with edge of the nut d HINT Use tread lock on Threaded Covers in accessible areas 4 Install Lag Bolts into the beam 5 Repeat for all other rafter locations 6 Center the rafter on the beam and Rafter Clip 7 Install Lag Bolts into rafter Pro Technique If the installation requires the brackets to be mounted on both sides of the same board be sure to inspect the brackets to orientate the holes so the attachment hardware does not collide NOTE The fastener holes are offset on each bracket Use and Care This hardware may not be suitable for every situation or installation application A design professional should be consulted to ensure the specific installation application meets local building code requirements If hardware becomes dirty clean with soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt or salt water Sane a 07 60 BUILDING PRODUCTS O O Www OZCOBuildingProducts com 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs Truss Accent Laredo Sunset Item 56616 Replacement Parts Kit Includes 2 Truss Accent Plates a 4 Hex Cap Nuts b e Accent Plate For All
20. ituation or installation application A design professional should be consulted to ensure the specific installation application meets local building code requirements If hardware becomes dirty clean with soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt or salt water bane a e 07 60 BUILDING PRODUCTS O I Www OZCOBuildingProducts com 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs 90 Flush Outside Truss Tie Item 56614 Replacement Parts Kit Includes 2 Flush Outside Plates a Number of Truss Accent Kits Required 2 Sold Separately e Truss Tie For 90 Deg Outside Joint e Designed For Connection Material gt 5 72 e Truss Accents Lag Bolts amp Hex Cap Nuts Sold Separately e 3 16 Thick Galvanized amp Power Coated Steel www OZCOBuildingProducts com patent pending 90 Flush Outside Truss Tie Installation Guide General Guidelines e Materials are heavy and bulky minimum of 2 people are required for most installations e Brace and tie off large beams and posts until all connections are made e Wear proper safety equipment e Check with local authorities and home owners association before construction e Check for underground and or hidden utilities that could be damaged e Be sure to use the right tool for the job e Plan ahead and
21. ly e Fits Hardware Up To 0 60 Diameter www OZCOBuildingProducts com patent pending Hammered Dome Cap Nut ns s2 Ornamental Hardware Installation Guide Steps 1 Remove threaded covers from all Dome Cap Nuts 2 Insert Lag Bolts into Cap Nut 3 OWT Lag Bolts require a 3 8 Hex Bit 4 Replace Threaded Covers do not over tighten 5 HINT Use tread lock on Threaded Covers in accessible areas Use and Care This hardware may not be suitable for every situation or installation application A design professional should be consulted to ensure the specific installation application meets local building code requirements If hardware becomes dirty clean with soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt or salt water DENER e 07 60 BUILDING PRODUCTS O I Www OZCOBuildingProducts com 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs
22. mp Hex Cap Nuts Sold Separately e 3 16 Thick Galvanized amp Power Coated Steel www OZCOBuildingProducts com patent pending 90 Flush Inside s Truss Tie Installation Guide General Guidelines e Materials are heavy and bulky minimum of 2 people are required for most installations e Brace and tie off large beams and posts until all connections are made e Wear proper safety equipment e Check with local authorities and home owners association before construction e Check for underground and or hidden utilities that could be damaged e Be sure to use the right tool for the job e Plan ahead and have the required hardware fasteners and tools close at hand before starting the installation Steps 1 Locate the plate in the correct location 2 Aclamp or similar device can be helpful to keep all parts tight and in place 3 Remove threaded covers from all Hex Cap Nuts a Insert Lag Bolts into Cap Nuts b OWT Lag Bolts require a 3 8 Hex Bit 4 Position the Truss Accent on the truss plate and attach with lag bolts 5 Repeat for all hardware locations 6 Replace Threaded Covers until flush with edge of the nut 7 HINT Use tread lock on Threaded Covers in accessible areas Use and Care This hardware may not be suitable for every situation or installation application A design professional should be consulted to ensure the specific installation application meets local building code requirements If hardware becomes dirty clean wit
23. r salt water bane a e 07 60 BUILDING PRODUCTS O I Www OZCOBuildingProducts com 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs Rafter Clips 4 Laredo Sunset Item 56618 Kit Includes 10 4 Rafter Clips a 20 1 Lag screws b 20 Hex Cap Nuts c e Attractive Sturdy Angle Bracket Can Be Used In A Wide Range Of Projects e Decorative Bracket Cutout Makes Exact Location Easy To Establish e Offset Hole Pattern For Unobstructed Back To Back Mounting e Includes Lag Bolts amp Hex Cap Nuts For 2 Material Or Thicker e Galvanized amp Power Coated 12 Ga Steel www OZCOBuildingProducts com patent pending Rafter Clips 4 usss Laredo Sunset Installation Guide General Guidelines e Materials are heavy and bulky minimum of 2 people are required for most installations e Brace and tie off large beams and posts until all connections are made e Wear proper safety equipment e Check with local authorities and home owners association before construction e Check for underground and or hidden utilities that could be damaged e Be sure to use the right tool for the job e Plan ahead and have the required hardware fasteners and tools close at hand before starting the installation Steps 1 Measure along beam and make vertical 72 long vertical marks from top edge of beam 2 Position the Rafter Clip so that the bend is flush with top of the beam and the point of the d
24. uilding code requirements If hardware becomes dirty clean with soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt or salt water DENER e 07 60 BUILDING PRODUCTS O I Www OZCOBuildingProducts com 2012 OZCO Building Products All Rights Reserved Design and Marketing by LiquidFly Designs Star 3 72 OD Ornamental Hardware Item 56624 A MIIRAN Replacement Parts Kit Includes 10 3 OD Star a 10 6 x 13 4 Wood Screw b 3 3 Od Decorative Star With Center Hole e Aluminum Casting Powder Coated Black www OZCOBuildingProducts com patent pending Star 3 OD wns Ornamental Hardware Installation Guide Steps 1 Position star in desired location 2 Check to make sure that screw is not too long for your installation location 3 Tighten screw Use and Care This hardware may not be suitable for every situation or installation application A design professional should be consulted to ensure the specific installation application meets local building code requirements If hardware becomes dirty clean with soap and water Avoid abrasions to surface and touch up any scrapes with paint Rinse with fresh water if hardware comes in contact with ice salt or salt water DENER e 07 60 BUILDING PRODUCTS O I Www OZCOBuildingProducts com 2012 OZCO Building Products All Rights Reserved Design
Download Pdf Manuals
Related Search