Builders Edge 130120009020 Installation Guide
Contents
1. EXTENSION IF USED MOUNT MASTER I 0015 MIPC9075 4 30 07 Step 4 Cut the siding around the Mount Master Install the siding according to the manufacturer s installation instructions See Figure 4 at right Step 5 Install the trim ring by locking it into place See Figure 5 at right Step 6 Install the light fixture or electrical device per the manufacturer s installation instructions Be sure that all electrical product gaskets have the proper sealant See Figure 6 at right Figure 62. Mount Master Installation Instructions For use with standard and Insulated Siding Series mount blocks electician To be installed prior to siding Part No PAPC8559 CAUTION All electrical connections must be in accordance with state and local codes ordinances and the National Electrical Code If you are unfamiliar with methods of installing electrical wiring and devices secure the services of a qualified licensed Step 1 Remove the trim ring from the Mount Master Assembly See Figure 1 at right Step 2 Cut the desired opening in the Mount Master by cutting along the patterns provided on the back of the part See Figure 2 at right Step 3 Center the Mount Master over the outlet box Be sure to place tape or sealant between the Mount Master and the house Attach the Mount Master securely using an 8d nail or equivalent with a minimum of four attachments See Figure 3 at right Note The sheathing on the illustration at right has been removed for clarity The outlet box should be in contact with the under side of the Mount Master Note The use of a box extension supplied by others may be required by your local or state electrical codes Alternatively the box can be repositioned so that it contacts the underside of the mount master Note Common sense caution and care are factors which cannot be built into any product These conditions must be supplied by the person s installing the fixture
Download Pdf Manuals
Related Search