Ultra Protect GS-3ESL Instructions / Assembly
Contents
1. Begin by recognizing the parts included in your new 3 step Ultra Protect Egress Escape Ladder kit Top Side Rail includes 2 Bottom Side Rail includes 2 Ladder Rung includes 3 Ladder Rung Safety Tape includes 3 Carriage Bolt 20 x 1 Includes 6 20 Wing Nut Includes 6 10 x 1 Self Tapping Sheet Metal Screw Includes 2 No tools required for assembly Installation tools Power Drill 3 8 Hex Driver Bit 1 8 Drill Bit sheet metal screw pilot hole optional Assembly and Installation Instructions Begin by selecting one of each of the Top Side Rail and Bottom Side Rail Slide the two pieces together lining up the thru holes keeping the top and bottom bends facing the same direction Repeat this with the remaining set of rails Next select a ladder rung and a carriage bolt Put the carriage bolt thru the rung holding the bolt head into the square hole Push the bolt thru the side rail connection and install a wing nut onto the carriage bolt and tighten securely Repeat this step with the remaining side rail assembly Install the remaining Ladder Rungs using the remaining carriage bolts and wing nuts and tighten securely Install the rung anti slip safety tape to the top of the rung stepping surface being careful to center the tape on the rung both vertically and horizontally The ladder is now fully assembled To install your new Ultra Protect Egress Escape Ladder simply hook the ladder onto the top rim of the window2. well Using a drill with a hex driver bit attach the ladder to the window well thru the holes in the bottom rails using the two 10 x 1 Self Tapping Sheet Metal Screw Thank you for choosing our product For support e mail customerservice dyneproducts com
Download Pdf Manuals
Related Search