Builders Edge 010140060010 Installation Guide
Contents
1. Shutter Lok Installation Instructions For use on any surface including wood aluminum vinyl stucco hardboard brick or masonry Required for Installation e Electric drill 1 4 drill bit hammer and Shutter Loks Step Place the shutter next to the window and mark desired location against the wall or window See Figure 1 at right Step 2 For smaller sizes use four Shutter Loks per shutter For large sizes 55 and over use six Shutter Loks per shutter Step 3 To help ensure proper alignment mark or pre drill holes using a 1 4 drill bit into the shutter before attaching it to the wall Step 4 With the shutter in location against the wall drill through the shutter into the wall surface 3 1 4 deep Make sure you drill holes deep enough so the Shutter Lok doesn t bottom out Step 5 Grasp the Shutter Lok supporting shank and push it through the shutter hole and into the wall surface Tap the Shutter Lok gently with a hammer to snug the shutter against the siding Do not over tighten or this will cause the shutter to dimple top of shutter N window ua S Y Y lj N N ly N lj N Y 7 Y 7 N Y 7 Y 7 N N N Y N N N 7 7 N N N Four Shutter Lok Application Six Shutter Lok Application Note To remove shutters do not attempt to pull o2. ut the Shutter Loks Simply use a pair of snips and slide them behind the shutter to cut the Shutter Lok off at the shank
Download Pdf Manuals
Related Search