Zanussi ZDTS 101 User's Manual
Contents
1. 26 ZANUSSI SS ZANUSSI www electrolux com www zanussi electrolux co uk 117972110 012008 CE2. Programme duration in Energy consumption in Water litres minutes Intensive 65 110 120 1 5 1 7 18 20 Normal 65 100 110 1 4 1 5 18 20 65 A 30 30 0 8 8 Eco 50 1 120 130 0 8 0 9 12 13 20 ZANUSSI Consumption values Programme Programme duration in Energy consumption in Water litres minutes Rinse and Hold 11 0 1 5 1 Test programme for Test Institutes Hints for test institutes Testing in accordance with EN 60704 mustbe aid dispenser have been filled with salt and carried out with appliance fully loaded and us rinse aid respectively and using the test pro ing the test programme see Consumption gramme see Consumption values values Testin accordance with EN 50242 must be carried out when the salt container and rinse Full load 9 standard place settings Amount of detergent required 5g 20 g Type B Rinse aid setting position 4 Type Ill N bi L s Upper basket without smaller bowl Upper basket with smaller bowland Cutlery basket and salad bowl salad bowl 21 cup racks position Installation Cae Lower basket A WARNING Any electrical and or plumbing work required to install this appliance should be carried out by a qualified electrician and or plumber or compe tent person Water connection A WARNIN
3. downwards so DEIGNA CING Ue NEES JAN SOUI that water cannot collect in the container Remove all left over food and debris or deep base Soften remnants of bumt food in pans Dishes and items of cutlery must not lie When loading the dishes and cutlery please inside one another or cover each other note 12 To avoid damage to glasses they must not touch Lay small objects in the cutlery basket Plastic items and pans with non stick coat ings have a tendency to retain water drops ZANUSSI these items will not dry as well as porcelain and steel items Light items plastic bowls etc must be loa ded in the upper basket and arranged so they do not move For washing in the dishwasher the following cutlery and dishes are not suitable pearls handles ture resistant Lead crystal glass Wooden platters Cutlery with wooden horn china or mother of Plastic items that are not heat resistant Older cutlery with glued parts that are not tempera Bonded cutlery items or dishes Pewter or copper items Steel items prone to rusting Items made from synthetics fibres are of limited suitability Only wash stoneware in the dishwasher if it is specially marked as being dishwasher safe by the manufacturer Glazed patterns may fade if machine washed frequently Silver and aluminium parts have a tendency to dis colour during washing Residues e g egg white egg yolk
4. flood device is activated light Close the water tap and contact your local Service 3 intermittent audible signals Force Centre 3 flashes of the end of programme indicator light 18 ZANUSSI Fault code and malfunction Possible cause and solution The programme does not start The dishwasher door has not been properly closed Close the door The main plug is not plugged in Insert the mains plug The fuse has blown in the household fuse box Replace the fuse Once these checks have been carried out Contact your local Service Force Centre quot Switch on the dishwasher The programme will ing the model Mod product number PNC continue from the point at which it was inter and serial number S N This information can rupted be found on the rating plate located on the side If the malfunction or fault code reappears con of the dishwasher door So that you always tact the Service Force Centre have these numbers athand we recommend For other fault codes notdescribed in the above you to make a note of them here chart please contact your Service Force Cen tre A a een PING ie neisuna ane e eue SN ie hat TTT The wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected The dishes are arranged in such a way as to stop water reaching all parts of the surface The baskets must not be overloaded The spray arms do notrotate freely due to incorrect arrangement of
5. poor washing results Clean fiters A Band C T mthe handle about 1 4 Remove filter A from the thoroughly under running turn anticlockwise and re base of the washing com water move filters B and C partment Replace the filters and lock by turning the handle clockwise to the stop C leaning the spray arms If residues of soil have clogged the holes in the Spray arms remove them with a cocktail stick NEVER try to remove the spray arms 16 External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth If necessary use only neutral detergents Never use abrasive products scouring pads or sol vent acetone trichloroethylene etc Internal cleaning Ensure that the seals around the door the de tergent and rinse aid dispensers are cleaned regularly with a damp cloth We recommend every 3 months to run the wash programme for heavy soiled dishes using de tergent but without dishes Prolonged periods of non operation If you are not using the machine for any pro longed period of time you are advised to 1 Unplug the appliance and then turn off the water 2 Leave the door ajar to prevent the forma tion of any unpleasant smells Environment concerns The symbol X on the product or on its packaging indicates that this product may not be treated as household waste Instead it should be taken to the appropriate collection point for the recycling of
6. the load The filters in the base of the washing compartment are dirty or incorrectly positioned Too little or no detergent has been used Where there are limescales deposits on the dishes the salt container is empty or the incorrect level of the water softener has been set The drain hose connection is not correct The salt container cap is not properly closed Rinse aid was not used The rinse aid dispenser is empty The dishes are wet and dull 19 The wash results are not satisfactory There are streaks milky spots or a bluish coating on Decrease rinse aid dosing glasses and dishes Water drops have dries onto glasses and dishes Increase rinse aid dosing The detergent may be the cause Contact the de tergent manufacturer s consumer care line If after all these checks the problem persists contact your local Service Force Centre Technical data Dimensions Width x Height x Depth cm 44 6 x 81 8 89 8 x 55 5 Electrical connection Information on the electrical connection is given on the rating plate on the Voltage Overall power Fuse inner edge of the dishwasher s door Water supply pressure Minimum 0 05 MPa 0 5 bar Maximum 0 8 MPa 8 bar Capacity place settings 9 Consumption values The consumption values are intended as a iations of the power supply and the amount of guide and depends on the pressure and the dishes temperature of the water and also by the var Consumption values Programme
7. G The dishwasher must not be connected to open water appliances or instantaneous water heat ers This dishwasher may be fed with either hot max 60 or cold water Nevertheless we ad vise you a cold water supply N WARNING Only use for connection to the water mains new hose set old hose setmustnotbe reused Ay CAUTION If the machine is connected to new pipes or pipes which have notbeen used fora long time you should run the water for a few minutes be fore connecting the inlet hose 22 Water inlet hose with safety valve Connect the inlet hose to a water tap with an external thread of 3 4 After connecting the double walled water inlet hose the safety valve is next to the tap If the water inlet hose leaks the safety valve cuts off the water supply ZANUSSI A WARNING If the water inlet hose or the safety valve is The electrical cable for the safety valve is in the damaged remove the mains plug immediately double walled water inlet hose and is live IN CAUTION Therefore do notimmerse the water inlet hose TAE orthe safety valve in water Take care when installing the water inlet hose Place the water inlet hose in such a way that itis always lower than the bottom edge of the Safety valve A water inlet hose with Safety valve MUST only be replaced by your local Service Force Centre Drain hose A X X Pe ae O o Connect drain hose to the Required height 30to 100 Ensure
8. ZANUSSI G da G User manual L ho 4 A Dishwasher x Ne ho 4 ZDTS 101 Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances Please read this user manual carefully and Keep it throughout the product life cycle as a reference document The user manual should be passed on to any future owner of the appliance Contents o 0 nu DD A QU Use of dishwasher salt 10 Use of rinse aid 11 Load cutlery and dishes 12 Useofdetergent 14 Unloading the dishwasher _______ 15 Care and cleaning _________ __ 16 Environment concerns __________ 17 What to do if 18 Technicaldata ____2_2_2_2_2_2_2_2_ 20 Consumption values _____ 20 Hints for test institutes __________ 21 Installation 22 Subject to change without notice A Safety information In the interest of your safety and to ensure the correct use before installing and first using the appliance read this user manual carefully in cluding its hints and warnings To avoid unnecessary mistakes and accidents itis im portant to ensure that all people using the appliance are thoroughly familiar with its opera tion and safety features Save these instruc tions and make sure that they remain with the appliance if itis moved orsold so thateveryone using itthrough
9. alt ter ZANUSSI IMPORTANT Immediately starta complete programme IMPORTANT Water will overflow fromthe container as saltis added AON REZ Remove any trace of salt Replace the cap tightly turning it clockwise until it stops with a click IMPORTANT Top up the special salt when the light on the control panel illuminates Use of rinse aid Open the lid Fill up with rinse aid The maximum level forfilling is which overflows Close indicated by max the lid and press until it locks 11 N caution Never fill the rinse aid dispenser with any other substances e g dishwasher cleaning agent liquid detergent This would damage the appliance Top up the rinse aid indica tor B becomes clear Adjusting the dosage of rinse aid Increase the dose if there are drops of water or lime Reduce the dose if there are whitish streaks on the spots on the dishes after washing dishes or a bluish film on glassware or knife blades DP SA V1 OS lt Open the lid Setthe dosage level The Close the lid and press un dose is factory setin po til it locks sition 4 Load cutlery and dishes Sponges household cloths and any objectthat Dishes and cutlery must not impede the can absorb water may not be washed in the rotation of the spray arms dishwasher Load hollow items such as cups glasses pans etc with the opening
10. and mustard often cause discolouring and Staining on silver Therefore always clean left overs from silver immediately if itis not to be washed Straight after use Le N Load cutlery For best re sults we recommend you to use the cutlery grid pro vided if the size and di mensions of the cutlery allow it Place knives and other items of cutlery with sharp points or edges with their handles facing upwards Risk of injury Load the lower basket Ar range serving dishes and large lids around the edge of the basket 13 FFE S y Load upper basket Light For taller items the cup items plastic bowls etc racks can be folded up must be loaded in the up wards per basket and arranged so they do not move Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper bas ket to the higher position Maximum height of the dishes in upper basket lower basket With upper basket raised 20 cm 31 cm With upper basket lowered 24 cm 27 cm IMPORTANT When the basket is in the higher position you will not be able to use the cup racks Move the front runner Refit the basket in the stops A ofthe upperbas higher position and re ket outwards and slide the place the stops A in their basket out original position 14 ZANUSSI Use of detergent IMPORTANT Observe the man
11. electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste ZANUSSI 3 Leave the inside of the machine clean Frost precautions Avoid placing the machine in a location where the temperature is below 0 C If this is unavoidable empty the machine close the ap pliance door disconnect the water inlet pipe and empty it Moving the machine Ifyou have to move the machine moving house etc 1 Unplug it 2 Turn the water tap off 3 Remove the water inlet and discharge ho ses 4 Pull the machine out together with the ho ses Avoid over tilting the machine during transpor tation handling of this product For more detailed information about recycling of this product please contact your local council your household waste disposal service or the shop where you purchased the product Packaging material The packaging materials are environmentally friendly and can be recycled The plastic com 17 ponents are identified by markings e g gt PE lt Pull the plug out of the socket gt PS lt etc Please dispose of the packaging Cut off the cable and plug and dispose of materials in the appropriate container at the them community waste disposal facilities Dispose of the door catch This prevents A CAUTION children from tra
12. er is always closed when itis not being loaded or unloaded In this way you will avoid anybody tripping over the open door and hurting themselves Do not sit or stand on the open door Child safety This appliance is designed to be operated by adults Don t allow children to use the dishwasher unsupervised Keep all packaging well away from children There is risk of suffocation Keep all detergents in a safe place out of children s reach Keep children well away from the dishwasher when the door is open Installation Check your dishwasher for any transport damage Never connect a damaged ma chine If your dishwasher is damaged con tact your supplier All packaging must be removed before use Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way Never use the dishwasher if the electrical supply cable and water hoses are damaged Control panel or if the control panel work top or plinth area are damaged such that the inside of the ap pliance is freely accessible Contact your local Service Force centre in order to avoid hazard All sides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components A CAUTION For electrical and water connection carefully follow the instructions given in specific
13. inal rinse Drying 1 cold rinse to avoid food scraps from sticking together This programme does not require the use of deter gent 1 Ideal for washing a partially loaded dishwasher This is perfect daily programme made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery 2 Test programme for test institutes First use Before using your dishwasher for the first time Ensure thatthe electrical and water connec tions comply with the installation instructions Remove all packaging from inside the appli ance Set the water softener Pour 1 litre of water inside the salt container and then fill with dishwasher salt Fill the rinse aid dispenser When using tablets that integrate rinse aid and detergent there is no need to fill up with rinse aid set the water softener add special dishwasher salt When using tablets that integrate rinse aid detergent saltfunction and other additives there is no need to fill up with special salt or rinse aid Check whether these detergents are suitable for your water hardness Follow the manufac turers instructions Set the water softener The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply which would have a det rimental or adverse effect on the operation of the appliance The higher the content of these minerals and Salts the harder your water is Water hard
14. its life will be properly informed on appliance use and safety Correct use This dishwasheris only intended for washing household utensils suitable for machine washing Do not put any solvents in the dishwasher This could cause an explosion Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket Only use products detergent salt and rinse aid suitable for dishwashers Avoid opening the door whilst the appliance is in operation hot steam may escape Do not take any dishes outof the dishwasher before the end of the dishwashing cycle After use isolate the appliance from the power supply and turn off the water supply This product should be serviced only by an authorised service engineer and only genu ine Spare parts should be used ZANUSSI Under no circumstances should you attempt to repair the machine yourself Repairs car ried outby inexperienced persons will cause injury or serious malfunctioning Contact your local Service Force Centre Always in sist on genuine spare parts General safety Dishwasher detergents can cause chemical burns to eyes mouth and throat Could en danger life Comply with the safety instruc tions of the dishwasher detergent manufacturer The water in your dishwasher is notfor drink ing Detergent residues may still be present in your machine Ensure that the door of the dishwash
15. l but Deactivation activation of the audible sig ton again programme light A becomes nals fixed and programme lightB starts flashing 1 Press the On Off button The appliance 4 After a few seconds must be in setting mode 2 Press and hold Programme selection Cancel button until programme light A programme light A turns off programme light B goes on flashing ZANUSSI End of programme light illuminates 6 To memorise the operation switch off the with fixed light indicating that the audi dishwasher ble signals are active 7 To activate again the audible signals sim 5 To deactivate the audible signals press ply follow the above operations until the again the Programme selection Cancel End of programme indicator light illumi button the End of programme light turns nates off indicating that the audible signals have been deactivated Washing programmes Degree of soil Type of load Programme description Intensive 65 Heavy soil Crockery cutlery pots e and pans Normal 65 Normal soil Crockery cutlery pots BER and pans 65 A 30 Light soil Crockery and cutlery 1 amp Normal soil Crockery and cutlery J 50 2 Rinse and Hold Any Ay Partial load to be completed later in the day Prewash Main wash 2 intermediate rinses Final rinse Drying Prewash Main wash 2 intermediate rinses Final rinse Drying Main wash Final rinse Prewash Main wash 1 intermediate rinse F
16. ness is measured in equivalent scales Clarke degrees French degrees TH Setthe water hardness to level 1 IMPORTANT If the drying results are not satisfactory we rec ommend that you 1 Fillup the rinse aid dispenser with rinse aid 2 Setthe rinse aid dosage to position 2 If you decide in future to use separated deter gents we advise that you Fillup the salt and rinse aid container Adjust the water hardness setting to the highest level and perform 1 normal washing programme without loading any dishes Adjustthe water hardness setting according to the hardness of the water in your area Adjust the rinse aid dosage and mmol l millimol per litre international unit for the hardness of water The softener should be adjusted according to the hardness of the water in your area Your local Water Authority can advise you on the hardness of the water in your area ZANUSSI Water hardness Adjusting the water hardness Use of salt setting Clarke TH mmol l manually electronically 64 88 91 125 9 0 12 5 2 level 10 yes 53 63 76 90 7 6 8 9 2 level 9 yes 46 52 65 75 6 5 7 5 2 level 8 yes 36 45 51 64 5 1 6 4 2 level 7 yes 28 35 40 50 4 0 5 0 2 level 6 yes 23 27 33 39 3 3 3 9 2 level 5 yes 18 22 26 32 2 6 3 2 1 level 4 yes 13 17 19 25 1 9 2 5 1 level 3 yes 5 12 7 18 0 7 1 8 1 level 2 yes lt 5 lt 7 lt 0 7 1 level 1 no The water softener must be set in both ways manually u
17. para graphs FP WY FE T j ae x is O Los 0D 65 65 A30 0 50 D X Cancel On Off button Programme selection cancel button Indicator lights Programme lights sS ZANUSSI Setting mode the appliance MUST be in setting mode u i Ifa programme light is illuminated and End of The appliance is in setting mode when all programme light is illuminated with fixed light programme lights are off and End of pro the last performed programme is still set gramme light flashes In this case the programme has to be cancelled IMPORTANT 1 Press and hold the Programme selection Cancel button until the light of the running programme turns off and the End of pro gramme light is flashing 2 Release the Programme selection Can cel button Always remember that when performing opera tions such as selecting a washing programme setting the water softener e deactivation activation of the audible signals Programme selection cancel button Starting the washing programme 1 Press the On Off button 2 Press the Programme selection cancel button once the light of the last performed washing pro gramme illuminates and the End of programme light flashes 3 Press the Programme selection cancel button as many times as necessary to illuminate the light corresponding to the desired programme 4 Close the dishwasher s door the programme will start automatically IMPORTANT Once the programme has sta
18. pping themselves inside When a unitis no longer being used ane endangering RENNES What to do if The dishwasher will not start or stops during solved with the help ofthe indications described operation in the chart without calling out an engineer Certain problems are due to the lack of simple Switch off the dishwasher and carry out the fol maintenance or oversights which can be lowing suggested corrective actions Fault code and malfunction Possible cause and solution continuous flashing of the start cancel indicator The water tap is blocked or furred with limescale light Clean the water tap 1 intermittent audible signal e The water tap is turned off 1 flash ofthe end of programme indicator light Turn the water tap on The dishwasher does not fill with water The filter where present in the threaded hose fitting at the water inlet valve is blocked Clean the filter in the threaded hose fitting The water inlet hose has not been correctly laid or itis bent or squashed Check the water inlet hose connection continuous flashing of thestart cancelindicator The sink spigot is blocked light Clean out the sink spigot 2 intermittent audible signals e The water drain hose has not been correctly laid or 2flashes of the end of programme indicator tis bent or squashed light Check the water drain hose connection The dishwasher will not drain continuous flashing of thestart cancelindicator Anti
19. pulling on the cable Always pull the plug The manufacturer accepts no liability for failure to observe the above safety precautions Fitting under a counter IMPORTANT Carefully follow the instructions on the enclosed template for building in the dishwasher and fit ting the furniture panel 24 A WARNING The dishwashermustbe secured againsttilting Therefore make sure that the counter it is fixed under is suitably secured to a fixed structure adjacent kitchen units cabinets wall This dishwasher is designed to be fitted under a kitchen counter or work surface No further openings for the venting of the dishwasher are required but only to let the wa ter fill and drain hose and power supply cable pass through The dishwasher incorporates adjustable feet to allow the adjustment of the height During all operations that involve accessibility to internal components the dishwasher has to be unplugged Be sure that once the appliance has been in Stalled itis easily accessible for the service engineer in the event that a repair is required Levelling Good levelling is essential for correct closure and sealing of the door When the appliance is correctly levelled the door will not catch on either side of the cabinet If the door does not close correctly loosen or tighten the adjustable feet until the machine is perfectly level See enclosed template ZANUSSI
20. rted if you want to change the selection made you must cancel the wash ing programme in progress e Cancel the washing programme in progress 1 Open the door 2 Press andhold the Programme selection cancel button until the light of the running programme turns off and the End of programme light is flash ing 3 Release the Programme selection cancel but ton 4 Switch off the machine by pressing the On Off button or selecta new washing programme check that there is detergent in the detergent dispenser Indicator lights End of programme indicator light Illuminates when the washing programme has ended gt Italso has added functions of visual signalling as the setting of the water softener deactivation activation of the audible signals intervention of an alarm due to the malfunction of the machine Salt indicator light Illuminates when the special salt has run out S Is never illuminated while a washing programme is running Audible signals Audible signals have been introduced to help indicate Factory setting audible signals activated which operations the dishwasher is performing end ofthe washing programme malfunction ofthe appliance Bo an eo gt Des LT 65 65 A 30 9 50 O Y X es Cancel Itis possible to deactivate the audible signals flashes and programme light B illuminates using the Programme selection Cancel but with fixed light ton 3 Press Programme selection Cance
21. sing the water hardness dial and electronically Setting the water softener manually see table The water softener is factory set at position 2 Set switch to position 1 or 2 Setting the water softener electronically see table The water softener is factory set at position 5 2 Ges T 65 65 A 30 50 O Hy x Cancel Press the On Off button The appliance must be in setting mode Press and hold Programme selection Cancel button until programme light A flashes and programme light B illuminates with fixed light After a few seconds programme light B turns off programme light A goes on flashing End of programme light starts flashing the number of flashes corresponds to Use of dishwasher salt eo gt es current level set The flashing is repea ted with a pause of a few seconds Examples 5 flashes pause 5 flashes pause etc level 5 4 Tochange the level press the Programme selection Cancel button Each time the button is pressed the level increases level 1 follows level 10 The End of pro gramme light indicates the new setting 5 To memorise the operation switch off the dishwasher A CAUTION Use only special salt suitable for dishwashers 10 Unscrew the cap Only before filling with Using the funnel provided salt for the first time fill pour in the salt until the the salt container with wa container is filled with s
22. thatthe hoses are When connecting the sink cm above bottom of the notkinked crushed oren drain hose to an under dishwasher tangled sink trap spigot the entire plastic membrane A must be removed F ail ure to remove allthe mem brane will result in food particles building up over time eventually blocking the dishwasher drain hose Spigot If you use a drain hose extension the total length should not be longer than 4 metres Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided 23 Electrical connection AN CAUTION Safety standards require the appliance to be earthed Prior to using the appliance for the first time ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed The fuse rating is also to be found on the rating plate Always plug the mains plug into a correctly in Stalled shockproof socket Multi way plugs connectors and extension cables must not be used This could constitute a fire hazard through over heating If necessary have the domestic wiring system socket replaced In case that the electrical ca ble has to be replaced contact your local Serv ice Force centre The plug mustbe accessible after the appliance has been installed Never unplug the appliance by
23. ufacturer s dosing and stor Only use detergents suitable for dishwashers age recommendations For programmes with pre When using detergent Close the lid wash add an additional tablets place detergent detergent dose in com tablets in compartment A Fill in the detergent in Observe the dosing lev compartment A els partmentB Detergent tablets cleaning power during short washing pro grammes Therefore please use long washing Detergent tablets from different manufacturers programmes when using detergent tablets to dissolve at different rates For this reason ensure the complete removal of detergent some detergent tablets do not attain their full residuals Unloading the dishwasher e Hot dishes are sensitive to knocks Empty the lower basket first and then the The dishes should therefore be allowed to upper one this will avoid water dripping from cool down before removing from the appli the upper basket onto the dishes in the lower ance one 15 Water may appear on the sides and the door AN CAUTION of the dishwasher as the stainless steel will When the washing programme has finished it eventually become cooler than the dishes 9 prog is recommended that the dishwasher is un plugged and the water tap turned off Care and cleaning Cleaning the filters IMPORTANT NEVER use the dishwasher without filters In correct repositioning and fitting of the filters will produce
Download Pdf Manuals
Related Search