Zanussi Z1162TRM Use & Care Manual
Contents
1. Instructions for the use and care of Z1142TRM Z1162TRM refrigerators Installation Foreword If you are discarding an old refrigerator that has a lock on the door please ensure that the lock is made unusable to avoid accidents to young children Electricity Supply The appliance is for operation on a 220 240 V 50 Hz supply so be sure that your electricity supply voltage is within the range marked on the nameplate located inside the cabinet Earthing WARNING THIS APPLIANCE MUST BE EARTHED The manufacturer declines any liability should this safety measure not be observed If the plug that is fitted to your appliance is not suitable for your socket outlet it must be cut off and the appropriate plug fitted The cut off plug should be disposed of to prevent the hazard of electric shocks in case it should be plugged into a 13 Amp socket in another part of your home Electrical connection IMPORTANT The wires in this mains lead are coloured in accordance with the following code GREEN AND YELLOW EARTH BLUE NEUTRAL BROWN LIVE If you fit your own plug the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug this is what you have to do Connect the green and yellow earth wire to the terminal in the plug which is marked with the letter E or the earth symbol or coloured green or green and yellow Connect the bl2. an hour replace the previously removed food into the compartment When defrosting it is not necessary to remove the foods from the inner door and cabinet of the refrigerator Important A temperature rise of the frozen food packs during defrosting may shorten their storage life Never use sharp metal tools to scrape off frost from the evaporator as you could thereby damage it Maintenance Prior to undertaking any maintenance operation be sure to unplug the appliance from the wall socket as a safety precaution Clean out the interior periodically with lukewarm water and some bicarbonate of soda the cabinet exterior with a Silicone wax spray the condenser and the motor compressor with a brush or a vacuum cleaner During periods when the appliance is not in use take the following precautions unplug the refrigerator from the power supply remove all foodstuffs from the refrigerator clean the interior and all accessories leave the door ajar to facilitate the circulation of air in the interior of the cabinet so as to prevent unpleasant odours from lingering in the appliance Servicing Should service be required for this appliance contact your local Service Agent but before requesting service the following simple checks may save you inconvenience and expense Check that the plug is firmly in the wall socket Check that there is an electricity supply to the socket by plugging in another appliance Turn the thermostat
3. knob to the coldest setting If the motor still does not run contact your Service Agent Door reversal directions ciz Before carrying out the operations described below pull out the mains plug from the wall socket Proceed as follows a To take off the table top first remove the two rear fixing screws 1 then slide it out from slots 7 b Remove the upper hinge 2 c Slide out the door 8 d Remove pivot 8 from hinge 2 and refit it in the corresponding hole on the opposite side e Replace the hinge 2 on the opposite side f Unscrew foot 5 and remove hinge 4 replace the door refit both the foot and the hinge on the opposite side g Refit the table top h Remove the handle 6 and refit it on the opposite side fixing holes are already provided Positioning the table top The appliance is delivered with the table top fixed flush with the door If a different positioning is required remove the two rear fixing screws 1 displace the table top to the new location secure the screws 1 Zanussi Elettrodomestici spa ZANUSSI GUARANTEE CONDITIONS This guarantee is in addition to your statutory and other legal rights which will not be excluded or in any way diminished by the return of the enclosed card We IAZ International UK Ltd guarantee that if within twelve months of the date of the purchase this ZANUSSI appliance or any part thereof is proved to be defe
4. ctive by reason only of faulty workmanship or materials we will at our option repair or replace the same FREE OF ANY CHARGE for labour materials or carriage on condition that e The appliance has been correctly installed and used only on the electricity supply stated on rating plate e The appliance has been used for normal domestic purposes and in accordance with the manufacturer s operating and maintenance instructions e The appliance has not been serviced maintained repaired taken apart or tampered with by any person not authorised by us e The appliance is still in the possession of the original purchaser e Any appliance or defective part replaced shall become our property This guarantee does not cover any damage caused during transportation or the replacement of any light bulbs or removable parts of glass or plastic Should you require service on your Zanussi appliance consult the enclosed list for your nearest Zanussi network centre If the product is under first year guarantee then you will be required to produce proof of date of purchase to the engineer If it is under 5 year cover then you must show your cover card to the engineer Please ensure that the enclosed pre addressed card is stamped completed in full and forwarded to IAZ International UK Ltd to enable the guarantee to be recorded Also complete the space below as your own record of the guarantee GUARANTEE RECORD Applianc
5. e purchased from on Guarantee card no _ Model no f Serial no __ These details may be taken from your Guarantee Record Card Your name Address 23292 7300 CFZ 678910 1112 84 Made in Italy GFP Pn
6. helves with any protective material such as paper cardboard or plastic which may obstruct the air circulation through them To help you use your refrigerator correctly here are some useful hints Row meat beef pork lamb amp wild fowl wrap in polythene bags and place on the first shelf under the star compartment Meat can only be stored safely in this way for two or three days at the most Cooked food cold cuts jelly etc these should be well covered and can be stored on anyone of the shelves Fruit amp vegetables these should be thoroughly cleaned and placed in the bottom drawers Butter amp cheese these should be placed in special airtight containers or wrapped in aluminium foil or polythene bags to exclude as much air as possible Milk bottles these should have a cap and should be stored in the bottle rack on the door Drink chiller For models incorporating a drinks dispenser The container for cooling drinks which is located on the inner door or depending on the model of appliance on the ceiling of the fridge compartment can easily be removed from its runners for filling To pour out a drink press the glass upwards against the tap arms Upon removing the glass the tap turns itself off To clean the container we recommend that you rinse it several times with hot water after letting the water cool down inside the container itself It also helps for a thorough cleaning of the con
7. its initial position in order to permit a higher cold air flow into the refrigerator cabinet Frozen food storage Net frozen food storage volume Model Z1142TRM 9 litres Model Z1162TRM 10 5 litres Total gross capacity Model Z1142TRM 140 litres Model Z1162TRM 160 litres The refrigerators model Z1142TRM Z1162TRM have a storage compartment marked with the 2 star symbol 4 which due to the low temperature reached 12 C is suitable for medium term storage of frozen foods i e 1 month unless otherwise stated by the manufacturer Do not exceed the storage limits for the rating of the frozen food packets given by the manufacturer Attention Do not put carbonated liquids fizzy drinks etc into the amp star compartment Water ices if consumed immediately after removal from the freezer can possibly result in a low temperature skin burn condition If there is a power failure during the storage of frozen food do not open the door during the whole time of the failure If the freezer is fully loaded the frozen food will not be affected if the power cut is of short duration a temperature increase can shorten its storage life otherwise it is recommended to consume the food within a very short time Fresh food refrigeration To obtain the best performance do not store warm food or evaporating liquids in the refrigerator do cover or wrap the food particularly if it has a strong flavour do not cover the s
8. r and a little bicarbonate of soda one teaspoonful to one quart of water Do not use soap or detergent as the smell might linger Dry thoroughly Operation Refrigerator Starting up Temperature Regulation Insert the plug into the wall socket Open the refrigerator door and turn the thermostat knob to be found on the upper right side of the inner liner clockwise beyond the position stop to start the appliance Temperature adjustment is obtained by turning the thermostat knob to the required setting A medium setting is generally the most suitable However the thermostat knob setting should be adjusted depending on the inner temperature of the refrigerator which in turn depends on a number of factors such as the ambient temperature the number of times the door is opened the quantity of food stored and the location of the appliance Turn the knob clockwise to higher numbers to obtain a lower temperature or anticlockwise if a less cold temperature is required Cold air flow control from the star compartment to refrigerator cabinet The conveyor to be found under the e star compartment can be adjusted in order to get a correct temperature balancing between the Ge star compartment and the refrigerator cabinet When the ambient temperature is lower than 25 C 77 F slightly raise the conveyor and push it all the way in When the ambient temperature is higher than 25 C 77 F return the conveyor to
9. tainer to add a spoonful of baking soda to the rinsing water Turn the dispenser tap on and off a number of times to allow sugar deposits from soft drinks or sweet wines to dissolve Empty the container and rinse with clean water Defrosting While in operation the star evaporator compartment becomes progressively covered with frost This frost which acts as an insulator and thus prevents the cold from reaching the food should be removed whenever the thickness of the frost exceeds 1 4 To carry out complete defrosting proceed as follows When no foods are stored in the e star compartment Place the plastic tray supplied with the appliance on the first shelf in correspondence with the drain hole on the conveyor Push the button at the center of the thermostat knob When defrosting is completed operation is resumed automatically After defrosting remove the water collected in the tray When foods are stored in the x star compartment Place the pastic tray supplied with the appliance on the first shelf in correspondence with the drain hole on the conveyor Remove from the compartment any stored food and wrap it in several layers of newspaper and put it in a cool place Pull out the plug from the wall socket Leave the doors open When defrosting is completed dry thoroughly Remove the water collected in the tray Replace the plug in the socket and after letting the appliance run for at least half
10. ue neutral wire to the terminal in the plug which is marked with the letter N or coloured black Connect the brown live wire to the terminal which is marked with the letter PL or coloured red The plug moulded on to the cord incorporates a fuse For replacement use a 13 Amp BS 1862 fuse Only ASTA approved fuses should be used The fuse cover carrier must be replaced in the event of changing fuse The right fuse cover carrier colour is the one shown by the coloured insert at the base of the plug The plug must not be used if the fuse cover carrier is lost A replacement cover carrier must be obtained from Zanussi Service Agents whose addresses are listed on the attached Zanussi Service and Spares Nationwide This appliance complies with E E C directive NO 76 889 of 4 11 76 relative to radio interference suppression Some models have the main terminal board of the type shown in fig 1 To gain access to the terminals of the supply cable remove the lid from the terminal board by releasing the two catches A and B Fig 1 with the aid of a small blade screwdriver Fig 1 Location and levelling Place the appliance away from heat sources and in such a way that air can circulate freely to the back and around the top of the cabinet Level by adjusting the special levelling feet on the bottom of the cabinet Before using Remove all securing tapes Wash inside the appliance with lukewarm wate
Download Pdf Manuals
Related Search