Yamaha Drums BS-751 User's Manual
Contents
1. CAUTION Do rat place the stand on uneven suTaces The stand rmay become unstable and or overtum and result in possible injury Do nat lean on or ride upon the instrument stand The stand may move and cause a fall resulting in injury Do not rough play etc in the vicinity of the stand Bodily harm may result by falling onto the stand Rough play may also result in the instrument being overtumed Also Keep children from playing in the V cinity of the stand 8 Strong earthquakes may cause the stand to move about or overlurn Stay away from the stands during earthquakes 0 Use the stand s casters to move the instrument on flat even surfaces only Lock the casters when the instrument is not to be moved 1 On inclned rough or gravel surfaces the instru ment may overtum and or become uncontrolla2. After locking the casters loosen the wing nut on the lock side and gently rotate the bass drum Once acomfortebleplaying positionhas been achieved holdthe bass druminplace and tighten the wingnut firmiy When adjusting the angle of the bass drum make sure that both fixing plates are in place and firmly tightened The bass drum may drop and cause injury if the fixing plates are not properly secured Wing Nut WW N SS amp 2 V Stand BasatLooc Ste AA hould be performed by at le 5 Removing the bass drum 1
3. 2 Slide the base pipe into the stand base use supplied hexwrenchtofirmlytighten allnecessary bolts Place asupplied cap in the bolts holes notused There are both left and right base pipe sections There are both lock side angle adjustment fixing side and free side free rotating side stand base assemblies See the following page for more details LOCK SIDE Siand Base Free Side Base Ppe 32 40 28 36 5 HeyagonalWWrench Accessory HexagonaMWrench AcceSSory GO Tame oten Bot a cw Sprng Wesher Spring Wesner Washer Washer i
4. Q dN 8 smi Djs mn 1 Vc RI 1
5. Thank you for purchasing the YAMAHA Concert Bass Drum Stand Please read this Owners Manual throughly before use mw ASSEMBLY PROCEDURE 1 Stand Mounting Stand Base and Base Pipe Assembly 1 1 Choose the bolt holes in the stand base according to the size of bass drum to be mounted BS 752 36 40 8 RR BS 750 28 CAA 38 B BS 752 For 36 inch use bolthole BS 753 For40inch use bolt hole B BS 750 Forgg Inch use bolt hole BS 751 For32inch usebolthole Stand Base
6. 3 4 1 Loosen the wing nut on the lock side Gentlyreturn the bass drum to an upright position 2 Loosenthewing nut on the free eide slide both fixing plates to the outeide 3 Tighten the wingnut on tne lack side so that the unit does not rtate 4 Simultaneouslylift both sides of the bass drum toremoveit fromthe stand Wing Nut Retumtoanupright position k Side HRemove Wing Nut mn a
7. Bass Drum Mounting 1 4 A 2 3 B 1 With the bass drum s lug parallel to the floor mount the base drum on the stand base s pivot unit See Fig A Make sure that the line between both lugs runs through the center of the bass drum as shown in the diagram 8 Slide bothfxingplatestowerdthebassdrumbody andfimmlytighten the wngnuton the pivot unit SeeFig 2 3 IF the Yamahalogoisoffcenter see FgB remountthedrum sothat thelogois parallel to the floor 1 SAE 2 kN Wing Nut x Fng Plate ASSEMBLY PROCEDURE 4 Adjustthe angle of he bass drum
8. 8
9. 80dpose CSitook 1 SandBose Caster Lock im or PY Caster Caster 7 ASSEMBLY PROCEDURE 2 Stand Mounting Attach the Pivot Unit 1 0 2 1 Loosen the wing nut ard slide the fixing plate to the outside mount the pivot unit to the standbases pivotshaft 2 Withthepivotunitparallel tothe floor tghtenthewingnut sothattheunitdoesnotrevolve SeelllustrationbeloW Wing Nut Wing Nut Tgnen 89 Ot SNoe Rotating Pivot Peng Plate Pivot Unit Pivot Unit Paraliel Floor 3
10. ble 2 Do not run while moving the instrument The stand may become uncontroliable and crash into other objects resulting in injury Two or more persons are necessary in the assembly of the stand When adjusting the angie make sure that both fxing plates are firmly tightened and the casters are locked IF the agle is adjusted without he fixing plates firmly tightened the instrument may drop on your foot caus ing injury Do rot use the stand in tne rain If the stand becomes et use a soft dry Cloth to wipe the stand as soon as possible Aays use a soft dry cloth to clean the stand as a part of periodic maintenance Never use thinner ben zene or other similar solvents 0 ciean the STand ithoinstumentis frequently moved the bolts wil be come loose over tme Check bolts regulary and firmly WVAMAHA YAMAHA CORPORATION PO Box Hamamatsu Japan Fred in Japan
Download Pdf Manuals
Related Search