Weider VB320 User's Manual
Contents
1. Slide the SLIDING SEAT ADJUSTER 8 with the SEAT 6 first onto the upper Tubing Section of the Main Frame Assemble the 3 8 X 3 4 THUMB SCREW 56 into 56 the Welded Nut on Werer Ng the bottom of the e Sliding Seat Adjuster to help secure the assembly PAGE 7 WEIDER SPORTING GOODS STEP 3 FRAME ASSEMBLY PART NAME 43 3 8 X 3 HEX HEAD BOLT 50 3 8 FLAT WASHER 51 3 8 LOCK WASHER 152 3 8 NYLON LOCK NUT 53 3 8 X 2 3 4 HEX HEAD BOLT 165 2 SQUARE PLASTIC INSERT CAP 1 WELDED U BRACKET UPPER 51 CROSS MEMBER oc LOWER DH cross MEMBER 65 65 FOOT O O Press 2 SQUARE PLASTIC INSERT CAPS 65 into the feet of the UPRIGHT 1 Press 2 SQUARE PLASTIC INSERT CAPS 65 into each end of the FRONT SUPPORT 3 Assemble the FRONT SUPPORT 3 into the bottom of the MAIN FRAME 2 Leg by first assembling a 3 8 FLAT WASHER 50 onto a 3 8 X 2 3 4 HEX HEAD BOLT 53 and then bolting through the Main Frame and then the Front Support Assemble another 3 8 FLAT WASHER 50 onto the Bolt and secure with a 3 8 NYLON LOCK NUT 51 L Attach the MAIN FRAME 2 to the Cross Members of the UPRIGHT 1 using two 3 8 X 3 HEX HEAD BOLTS 43 to bolt through the lower tubing section of the Main Frame and then through the lower Cross Member of the Upright Assemble 3 8 LOCK WASHERS 51 onto the Bolts and then secure with 3 8 NYLON LOCK2. to a designated Weider facility or an authorized service station for repairs if Warranty repair or replacement is made at a Weider facility the Equipment will be returned to you at Weider s expense If Warranty repair or replacement is made at a service station arrangements for the return of the Equipment must be made directly with the service station and are made at your expense
3. ICTORY 32 CLUB SERIE S 4 SERIAL NUMBER DECAL weider OWNER S MANUAL MADE IN CANADA Congratulations on selecting a WEIDER Fitness Product You have just joined thousands of health conscious men and women in the growing family of WEIDER customers We are committed to providing excellent service and customer satisfaction We invite you to call us with any questions you may have concerning this product Our customer service representatives are here to serve you and provide helpful information Call us toll free at 1 800 225 0653 Monday Friday 7 00 AM 6 00 PM CST Extended Seasonal Hours Dec 1 Feb 28 Monday Friday 7 00 AM 9 00 PM Saturday 9 00 AM 5 00 Sunday 12 00 PM 4 00 PM Thank you again for choosing WEIDER We appreciate having you as a customer and hope this product will provide years of enjoyable service PRINTED IN CANADA WEIDER SPORTING GOODS INC 900 West St John Olney IL 62450 USA PAGE 1 WEIDER SPORTING GOODS ee 1 1 Introduction 2 Bolt Scale Sheet 3 4 5 6 10 SC 11 IMPORTANT SAFETY PRECAUTIONS WARNING To reduce the risk of serious injury read the important safety precautions before using this equipment CAUTION DO NOT ASSEMBLE OR USE THIS EQUIPMENT ON A NON MAR SURFACE 1 Read all instructions in this manual before using this equipment 2 Use this equ
4. NUTS 52 E Attach the upper tubing section of the MAIN FRAME 2 to the upper Cross Member of the UPRIGHT 1 by assembling the Main Frame section into the Welded U Bracket on the Upright Bolt using a 3 8 X 3 HEX HEAD BOLT 43 a 3 8 LOCK WASHER 51 and a 3 8 NYLON LOCK NUT 52 PAGE 8 WEIDER SPORTING GOODS STEP 4 LEG CURL ASSEMBLY PART NAME 5 16 FLAT WASHER 5 16 NYLON LOCK NUT 5 16 X 2 1 4 HEX HEAD BOLT 3 8 NYLON LOCK NUT 3 8 X 2 3 4 SHOULDER BOLT 3 8 X 3 4 THUMB SCREW 1 2 O D X 7 16 LONG METAL SPACER WEIGHT STOP 3 4 ROUND PLASTIC INSERT CAP 1 3 4 SQUARE PLASTIC INSERT CAP 1 ROUND PLASTIC COVER CAP W 15 ANGLE 1 ROUND PLASTIC INSERT CAP LOCKING PIN h See W 1 lech 1 sch sch Lob C Press 1 3 4 SQUARE PLASTIC INSERT CAPS 67 into the ends of the top tubing of the LEG CURL 10 Press a 1 3 4 SQUARE PLASTIC INSERT CAP 67 into the top of the LEG CURL ADJUSTER 11 Press a 1 ROUND PLASTIC INSERT CAP 69 into the forward end No hole near this end of the WEIGHT PIN 15 C Assemble the 1 X 14 1 2 WEIGHT PIN 15 through the angled hole in the front side of the LEG CURL 10 Secure in place by first assembling a 5 16 FLAT WASHER 40 and a 1 2 OD X 7 16 LONG METAL SPACER 60 onto a 5 16 X 2 1 4 HEX HEAD BOLT 42 and then bolting through the side of the Leg Curl Assemb
5. ST BAR TOOLS REQUIRED FOR ASSEMBLY 1 Two adjustable crescent wrenches or a combination of 1 2 and 9 16 box end wrenches 2 Phillips Screwdriver 3 Flat Blade Screwdriver 4 Hammer SdV2 JILSYId JNWNOS LAN X901 NOTAN 8 2 LNN 1901 NOTAN 9L S OH OH SJIJHSYM LV SdY93 JILSYId ANNOY W E SMO19S PLEH PUNOJ pue S30 SBELLIE So PE H X H 9L S 103 p sn eq UE JLIJS 9 L 4 N z 2 A a SONIHSNG GO 2 b SM219S DESaH PUNOJ A0 SzOg SHejUeD S3108 PEOH X H 8 S 40 P SN 9q ULI 3189S aaue NAITIWAC ANWAAOINWH NZOSA PAGE 6 WEIDER SPORTING GOODS STEP 1 BACKREST amp SEAT ASSEMBLY PART NAME QTY 50 3 8 FLAT WASHER 2 514 3 8 LOCK WASHER 6 54 3 8 X 1 1 4 HEX HEAD BOLT 6 O Begin by attaching the SEAT 6 to the top of the SLIDING SEAT ADJUSTER 8 Assemble a 3 8 LOCK WASHER 51 and then a 3 8 FLAT WASHER 50 onto two 3 8 X 1 1 4 HEX HEAD BOLTS 54 and then bolt up through the Adjuster and into the Seat L Attach the BACKREST 4 fo the top of the SLIDING SEAT ADJUSTER 8 by first assembling a 3 8 LOCK WASHER 51 onto four 3 8 X 1 1 4 HEX HEAD BOLTS 54 and then bolt up through the Adjuster and into the Backrest STEP 2 ATTACHING SEAT amp BACKREST 54 PART NAME QTY 56 3 8 X 3 4 THUMB SCREW 1 C Orient the MAIN FRAME 2 so that the Tubing Section with the Welded Bracket is on the bottom
6. aimer applies during and after the warranty period Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you _ Weider is not responsible for damage to the Equipment caused by accident theft misuse abuse abnormal use or conditions neglect or modifications This Warranty gives you specific legal rights and you may have other rights which vay from state to state CLAIM PROCEDURE lf you discover a defect or malfunction during the period to which this Warranty applies you must follow this procedure Write to Parts Service Weider Sporting Goods 900 West St John Street Olney Illinois 62450 In your letter state your full name and address the reason why you believe there is a defect or malfunction subject to this warranty and the date and conditions under which the defect or malfunction occurred To obtain warranty you must include in your letter a copy of the sales receipt or other proof of date of purchase of the Equipment otherwise no warranty will be issued Upon receipt of your letter Weider will make a preliminary determination of its responsibility to repair or replace under this Warranty PARTS SERVICE 1 800 225 0653 if Weider denies responsibility it will explain its decision in writing if Weider accepts responsibility to repair or replace the item or part under the warranty it will notify you in writing to bring or ship the Equipment
7. ipment only as described in this Assembly Manual 3 Position the Home Gym on a level surface 4 inspect and tighten all parts each time this equipment is used Replace any worn parts immediately 5 Always hold the handle bars when exercising 6 Keep hands away from moving parts other than the designated handles 7 Keep small children away from this equipment during use 8 Do not allow small children to play on this equipment unattended 9 Wear appropriate workout attire including running or aerobic shoes WARNING Before beginning this or any exercise program consult your physician This is especially important for individuals over the age of 35 or persons with pre existing health problems Read all instructions before using Weider assumes no responsibility for personal injury or property damage sustained by or through the use of this product PAGE 2 WEIDER SPORTING GOODS INTRODUCTION Thank you for choosing the Weider VICTORY CLUB SERIES 320 Your Home Gym is designed and engineered to give you many hours of weight and aerobic conditioning This manual is provided to help you understand the simple assembly adjustments and use of the Home Gym In addition to assembly instructions it also contains maintenance tips and parts information Please take time to read all the information contained in this manual and after assembly is completed keep it for future reference ADJUSTABLE UPRIGHTS LEFT SIDE BACKRE
8. le another 5 16 FLAT WASHER 40 onto the Bolt and secure with a 5 16 NYLON LOCK NUT 41 C Press a 1 ROUND PLASTIC COVER CAP WITH 15 ANGLE 68 onto the rear extended portion of the WEIGHT PIN 15 The 15 side of the Cap should be oriented to the angle of the Weight Pin C Slide the WEIGHT STOP 63 over the Weight Pin flared side out WELDED 4 BRACKETS o C Press 3 4 ROUND PLASTIC INSERT CAPS 66 into the ends of the 3 4 X 17 3 4 PAD BARS 7 Apply a small amount of liquid dish detergent 9 to each Pad Bar and slide on one 3 3 4 X 8 FOAM ROLLER 9 The detergent helps in the assembly of the Foam Rollers and when it dries it acts as an adhesive C Assemble the PAD BARS 7 into the two larger access holes in the LEG CURL 10 Assemble another 3 3 4 X 8 FOAM ROLLER 9 onto each Pad Bar O Assemble the LEG CURL 10 into the Welded Brackets of the LEG CURL ADJUSTER 11 using a 3 8 X 2 3 4 SHOULDER BOLT 55 and a 3 8 NYLON LOCK NUT 52 PAGE 9 WEIDER SPORTING GOODS Cl Slide the LEG CURL ADJUSTER 11 down into the top of the MAIN FRAME 2 Leg Secure into one of the two positions using a LOCKING PIN 70 to pin through the Main Frame and the Leg Curl Adjuster Secure in place by bolting through the front of the Leg with a 3 8 X 3 4 THUMB SCREW 56 STEP 5 ADJUSTABLE UPRIGHTS QTY Ka Press a 1 1 4 ROUND PLASTIC INSERT CAP 64 in
9. sted up or down by pinning through the Bracket of the Seat with a 3 8 X 3 1 2 L PIN 71 and securing with a 3 8 SPRING CLIP 57 O The BACKREST 4 can be adjusted into a horizontal position or with the aid of the BACKREST BAR 14 into an inclined position BRACKET 57 BRACKET 57 4 6 BACKREST HORIZONTAL POSITION 4 BACKREST 14 BACKREST 6 BAR INCLINED POSITION Weider Sporting Goods Inc warrants this item of equipment to be free from defects in material and or workmanship for a period of 90 DAYS from the date of the original purchase retail mail order or otherwise for use Weider also warrants the frame of this item of equipment to be free from defects in material or workmanship for a period of THREE YEARS from the date of original purchase In the event of a defect in material or workmanship during the warranty period Weider will repair or replace at its option the Equipment or frame under the conditions of this Warranty Weider will do so at its expense for the cost of labor and materials but not for mailing except as noted LIMITATIONS EXCLUSIONS AND OTHER RIGHTS Weider disclaims liability for any and all implied warranties except as set forth to the contrary herein Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you Weider disclaims liability for indirect incidental or consequential damages This discl
10. to the Handles 2 of the ADJUSTABLE UPRIGHTS 12 Apply a small amount of liquid dish detergent to each Handle and slide on a 5 LONG FOAM GRIP 13 The detergent helps in the assembly and also acts as an adhesive when it dries C Slide the ADJUSTABLE UPRIGHTS 12 down into the top of the UPRIGHT 1 The height of the Adjustable Upright can be adjusted by inserting the LOCKING PIN 70 into the Upright Post and then into one of the position holes on the Adjustable Upright The Adjustable Uprights may also be used at the inner positions on the back of the Upright SEE DETAIL A C By placing the BACKREST BAR 14 into the Welded Brackets located on the front of the UPRIGHT 10 the BACKREST 4 can be 4 sel inclined i o STT mme o BRACKET w LL WELDED BRACKET 1 See D DETAIL A PAGE 10 WEIDER SPORTING GOODS STEP 6 ADJUSTING SEAT amp BACKREST PART NAME 57 A SPRING CLIP 71 3 8 X 3 1 2 L PIN ES C The BACKREST 4 and SEAT 6 have several optional positions The Backrest and Seat can be moved forward or back on the SLIDING SEAT ADJUSTER 8 Align the hole locations in the MAIN FRAME 2 with the holes in the Sliding Seat Adjuster and lock in place with a 3 8 X 3 1 2 L PIN Gu and a 3 8 SPRING CLIP 57 LI The SEAT 6 can be adju
Download Pdf Manuals
Related Search