VTech T2308 User's Manual
Contents
1. vtech Innovation Beyond Technology User s Manual www vtechphones com Model t2308 la Technology Part Check List Parts Check List To purchase replacement batteries visit i Handset us on the web at www vtechphones com 2 Base Unit or call VTech Communications at 3 Telephone line cord 800 595 9511 In Canada go to 4 Battery www vtechcanada com or call VTech 5 Power Adapter Electronics at 1 800 267 7377 6 User s manual TELEPHONE BATTERY POWER ADAPTOR USER S MANUAL LINE CORD 2 Installation TELEPHONE WALL JACK T AC ELECTRICAL OUTLET Setting Up Your phone 1 Choose an area near an electrical outlet and a telephone wall jack 2 Plug the AC power adapter into an electrical outlet and the DC connector to the power jack on the bottom of the base unit Insert the cord in the channel guide CAUTION Use only the AC adapter shipped with your phone It is specifically designed for this product Connect power to the base unit before placing the handset in the cradle 3 CHARGE THE HANDSET BATTERY BEFORE USE The battery recharge automatically whenever the handset is in the base unit The battery must be charged for at least 16 hours before using your phone for the first time 4 Connect the telephone line cord Insert one end of the telephone line cord into the phone jack on the bottom of the base unit Plug2. adopted by ACTA A compliant telephone cord and modular plug is provided with this product It is designed to be connected to a compatible modular jack that is also compliant An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines See Installation Instructions in the user s manual The Ringer Equivalence Number REN is used to determine how many devices you may connect to your telephone line and still have them ring when you are called The REN for this product is encoded as the 6 and 7 characters following the US in the product identifier e g if is 03 the REN is 0 3 In most but not all areas the sum of all RENs should be five 5 0 or less For more information please contact your local telephone company This equipment may not be used with Party Lines If you have specially wired alarm dialing equipment connected to your telephone line ensure the connection of this equipment does not disable your alarm equipment If you have questions about what will disable alarm equipment consult your telephone company or a qualified installer 20 Technical Specifications Enhanced 2 4GHz Technology Your phone operates on a dual band transmission that combines the best of 2 4GHz and 900MHz technologies providing enhanced performance over standard cordless telephones Crystal controlled PLL synthesizer Base 2410 2 2418 9 MHz Handset 912 75 917 10 MHz Base 912 75 917 10 MHz Handset
3. the other end into a telephone wall jack Make sure the plugs snap securely into place Insert the cord in the channel guide 5 CHECK FOR A DIAL TONE After the battery is charged pick up the handset and press the TALK key You should hear a dial tone If not see TROUBLESHOOTING NOTE NEED HELP This book has all the feature operation and troubleshooting you need to install and operate your new VTech phone Please take the time to review thoroughly to ensure proper installation and the bene fit of this VTech innovative and feature rich product You can also visit our website at www vtechphones com for support shop ping and everything new at VTech In Canada please visit www vtechcanada com VTech toll free 1 800 595 9511 In Canada dial 1 800 267 7377 Important Before using this telephone you must read important safety instructions on page 19 Installation Installing the Battery 1 Slide the battery cover off by gently pressing on the recessed area with a downward motion 2 Unplug and remove the old battery Do not dispose of the old battery ina trash compactor or fire it could explode 3 With the red and black wires at the bottom of the battery angle the top of the battery into the compartment under the claws Next press the lower end of the battery down so it is held in place by the lower claw Now plug the connector into the socket located below the battery Slip the battery wires into the guide
4. 2410 2 2418 9 MHz Maximum power allowed FCC and IC Actual operating range may vary according to environmental conditions at the time of use Handset 185mm X 53mm X 39mm Base 108mm X 88mm X 123mm Handset 106 grams Base 133 grams Handset Self contained nickel cadmium rechargeable battery supply 3 6V nominal 300mAh capacity Power Adapter 6V AC 220mA Speed Dial 10 Memory locations 16 digits per location Frequency Control Transmit Frequency Receive Frequency Channels Nominal Effective Range Power Requirements 22 Important Safety Instructions When using your telephone equipment basic safety precautions should always be followed to reduce the risk of fire electric shock and injury including the following 1 Read and understand all instructions 2 Follow all warnings and instructions marked on the product 3 Unplug this product from the wall outlet before cleaning Do not use liquid or aerosol cleaners Use a damp cloth for cleaning 4 Do not use this product near water for example near a bath tub kitchen sink or swimming pool 5 Donot place this product on an unstable surface such as a table shelf or stand The product may fall causing serious damage 6 Slots and openings in the back or bottom of the base unit and handset are provided for ventilation To protect them from overheating these openings must not be blocked by placing the product on a soft surface such as a bed sofa or
5. hours For optimum daily performance return the handset to its base when not in use e Reset the base Unplug the unit s electrical power Wait for 15 seconds then plug it back in Allow up to one minute for the handset and base to reset cannot get a dial First try all the suggestions above tone Move the handset closer to the base You might have moved out of range Your line cord might be malfunctioning Try installing a new line cord If the previous suggestions don t work disconnect the base unit from the telephone jack and connect a different phone If there is no dial tone on that phone either the problem is in your wiring or local service Contact your local telephone company 10 Operating Instructions Making Calls Pick up the handset and press TALK When you hear a dial tone dial the number The handset in use charging LED will illuminate while the handset is in use If you make a mistake when dialing press OFF to hang up then press TALK to get the dial tone again You must always press TALK before you can dial a call on the handset Answering Calls When an incoming call is ringing the LED on the handset will flash To answer a call when the handset is in the base simply pick up the handset To answer a call when the handset is off of the base press any key on the handset except OFF Disconnecting To end a call either place the handset back in the base or press OFF Changing C
6. in Memory for details Channel Key e Pressing the CHAN key when the handset is in use will activate a channel change to the next clear channel e This is used if you are experiencing noise or interference on the current channel MEM KEY While in programming mode press MEM to confirm your selection The sequence for dialing a speed dial number is TALK MEM number button 0 9 PROG KEY Press the PROG to enter programming mode Tone Key e In PULSE dialing mode this key is used to switch to temporary TONE dialing mode HANDSET LOCATOR CE Handset Locator Button e Press the HANDSET LOCATE key to page the handset This is useful to help find a missing handset e Press it second time or place the handset back in the base to cancel a page e The base will ring the handset for one minute before ending the page automatically e The handset can also cancel the page by pressing the OFF key Operating Instruction Programming The Ringer Type You can choose from four ringer styles or turn the ringer off To change the ringer setting first begin with the phone in idle off mode Then e Press PROG e Press the key e Press a key 1 through 4 to select a ringer type Or press 5 to turn the ringer off e Press the MEM key to confirm Checking The Ringer To check which ringer is currently programmed e Press PROG e Press the key e Press 0 e Press the MEM key to confirm Memory Dialing Your
7. phone can store up to 10 different phone numbers that you can dial just by pressing TALK MEM and the memory location number Programming Speed Dial Numbers Begin with the handset in idle off mode Then 1 Press PROG 2 Press the number of the memory location 0 9 you wish to store the number in 3 Using the dial pad dial the number you want to store maximum of 16 digits The number can be entered manually or by using REDIAL If you wish to store the most recently dialed number as a speed dial entry 4 Press MEM to save Speed Number Dialing 1 Press TALK 2 Press MEM and the memory location number key 0 9 For example to dial the number you assigned to key 8 you would press TALK MEM 8 To Change or Replace a Speed Dial Number To change or replace a stored number in speed dial memory simply enter the new number following the Programming Speed Dial Numbers instructions 8 Troubleshooting If you have difficulty operating your phone the suggestions below should solve the problem If you still have difficulty after trying these suggestions call VTech Communications at 1 800 595 9511 In Canada call VTech Telecommunications Canada Ltd at 1 800 267 7377 Problem Suggestion My phone doesn t Make sure the power cord is plugged in work at all e Make sure the telephone line cord is plugged firmly into the base unit and the telephone wall jack e Charge the battery in the handset for at least 16
8. rug This product should never be placed near or over a radiator or heat register This product should not be placed in any area where proper ventilation is not provided 7 This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply in your home consult your dealer or local power company 8 Donotallow anything to rest on the power cord Do not install this product where the cord may have anyone walking on it 9 Never push objects of any kind into this product through slots in the base or handset as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock Never spill liquid of any kind on the product 10 To reduce the risk of electric shock do not disassemble this product but take it to an authorized service facility Opening or removing parts of the base or handset other than specified access doors may expose you to dangerous voltages or other risks Incorrect reassembling can cause electric shock when the product is subsequently used 11 Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock 12 Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions A When the power supply cord or plug is damaged or frayed B If liquid has been spilled onto the product C If the product h
9. will be given the opportunity to correct the problem and the telephone company is required to inform you of your right to file a complaint with the FCC Your telephone company may make changes in its facilities equipment operation or procedures that could affect the proper functioning of this product The telephone company is required to notify you if such changes are planned If this product is equipped with a corded or cordless handset it is hearing aid com patible If this product has memory dialing locations you may choose to store emergency telephone numbers e g police fire medical in these locations If you do store or test emergency numbers please e Remain on the line and brie y explain the reason for the call before hanging up e Perform such activities in off peak hours such as early morning or late evening Industry Canada This equipment complies with regulations RSS210 and CS 03 of Industry Canada Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device The term IC before the certification registration number only signifies that the Industry Canada technical specifications were met The Ringer Equivalence Number REN for this terminal equipment is 0 1 The REN is an indication of the maximum number of devices allowed to be connected to a telepho
10. ECOMMUNICATIONS LTD Printed in China 91 000397 020 000 ISSUE 0 vtech Innovation Beyond Technology in
11. TELEPHONE LINE CORD FROM THE WALL Then pull the unit out by the unplugged cord 16 Troubleshooting Problem get noise static Suggestion e Press the CHAN button while on a call or weak signal even until the interference has been eliminated when I m near the e Other electronic products can cause base interference with your cordless phone Try installing your phone as far away from these types of electronic devices as possible wireless routers radios radio towers pager towers cell phones intercoms room monitors televisions personal computers kitchen appliances and other cordless phones e Microwaves operate on the same frequency as your phone It is normal to experience static on your phone while the microwave is running Do not install this phone in the same outlet or near the microwave e If your phone is plugged in with a modem or surge protector plug the phone or modem surge protector into a different location If this solves the problem re locate your phone or modem farther apart from one another or use a different surge protector e Relocate your phone to a higher location The phone will likely get better reception not installed in a low area e If the other phones in your home are having the issue the problem is in your wiring or local service Contact your local telephone company charges may apply 13 Troubleshooting Problem Suggestion e Press the CHAN button while on a cal
12. as been exposed to rain or water D If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation E If the product has been dropped and the base and or handset has been damaged F If the product exhibits a distinct change in performance 13 Avoid using a telephone other than cordless during an electrical storm There is a remote risk of electric shock from lightning 14 Do not use the telephone to report a gas leak in the vicinity of the leak 15 Only put the handset of your telephone next to your ear when it is in normal talk mode SAVE THESE INSTRUCTIONS 19 FCC ACTA and IC Regulations If this equipment is malfunctioning it must be unplugged from the modular jack until the problem has been corrected Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents For repair procedures follow the instructions outlined under the Limited Warranty If this equipment is causing harm to the telephone network the telephone company may temporarily discontinue your telephone service The telephone company is required to notify you before interrupting service If advance notice is not practical you will be notified as soon as possible You
13. ce with your cordless phone Try installing your phone as far away from these types of electronic devices as possible wireless routers radios radio towers pager towers cell phones intercoms room monitors televisions personal computers kitchen appliances and other cordless phones e Your line cord might be malfunctioning Try installing a new line cord 14 Your phone cordless telephone contains sophisticated electronic parts so it must be treated with care Avoid rough treatment Place the handset down gently Save the original packing materials to protect your telephone if you ever need to ship it Avoid Water Your telephone can be damaged if it gets wet Do not use the handset outdoors in the rain or handle it with wet hands Do not install your base unit near a sink bathtub or shower Electrical Storms Electrical storms can sometimes cause power surges harmful to electronic equipment For your own safety use caution when using electric appliances during storms Cleaning your telephone Your telephone has a durable plastic casing that should retain its luster for many years Clean it only with a soft cloth slightly dampened with water or a mild soap Do not use excess water or cleaning solvents of any kind Remember that electrical appliances can cause serious injury if used when you are wet or standing in water If your base unit should fall into water DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND
14. ect the handset battery if applicable Wait a few minutes Connect power to the base Re install the battery Wait for the handset to re establish its link with the base To be safe allow up to one minute for this to take place 12 Troubleshooting Problem My handset does not ring when I receive a call Maintenance Suggestion e Make sure you have the ringer activated Refer to the section s on ringer selection in this User s Manual e Make sure the telephone line cord is plugged firmly into the base unit and the telephone jack Make sure the power cord is plugged in e You may be too far from the base unit e Charge the battery in the handset for at least 16 hours For optimum daily performance return the handset to its base when not in use e You may have too many extension phones on your telephone line to allow all of them to ring Try unplugging some of the other phones e The layout of your home or office might be limiting the operating range Try moving the base to another location preferably on an upper floor e If the other phones in your home are having the issue the problem is in your wiring or local service Contact your local telephone company charges may apply e Test a working phone at the phone jack If another phone has the same problem the problem is the phone jack Contact your local telephone company charges may apply e Other electronic products can cause interferen
15. et and none of the keys or buttons work e Make sure the power cord is plugged in 15 Warranty Statement What does this limited warranty cover The manufacturer of this VTech product VTech Communications warrants to the holder of a valid proof of purchase Consumer or you that the product and all accessories provided by VTech in the sales package Product are free from material defects in material and workmanship pursuant to the following terms and conditions when installed and used normally and in accordance with operation instructions This limited warranty extends only to the Consumer for Products purchased and used in the United States of America What will VTech Communications do if the Product is not free from material defects in materials and workmanship during the limited warranty period Materially Defective Product During the limited warranty period VTech authorized service representative will repair or replace at VTech option without charge a Materially Defective Product If we repair this product we may use new or refurbished replacement parts If we choose to replace this product we may replace it with a new or refurbished product of the same or similar design VTech will return repaired or replacement products to you in working condition VTech will retain defective parts modules or equipment Repair or replacement of Product at VTech option is your exclusive remedy You should
16. expect the repair or replacement to take approximately 30 days How long is the limited warranty period The limited warranty period for the product extends for ONE 1 YEAR from the date of purchase if we repair or replace a Materially Defective Product under the terms of this limited warranty This limited warranty also applies to repaired or replacement Products for a period of either a 90 days from the date the repaired or replacement Product is shipped to you or b the time remaining on the original one year warranty whichever is longer What is not covered by this limited warranty This limited warranty does not cover 1 Product that has been subjected to misuse accident shipping or other physical damage improper installation abnormal operation or handling neglect inundation fire water or other liquid intrusion or 2 Product that has been damaged due to repair alteration or modification by anyone other than an authorized service representative of VTech or 3 Product to the extent that the problem experienced is caused by signal conditions network reliability or cable or antenna systems or 4 Product to the extent that the problem is caused by use with non VTech electrical accessories or 5 Product whose warranty quality stickers Product serial numbers plates or electronic serial numbers have been removed altered or rendered illegible or 6 Product purchased used serviced or shipped for repair fro
17. hannels If you notice interference when using your handset press CHAN to switch to a clear channel This function is only available when you are on a call Tone Pulse Setting Your phone is preset at the factory for TONE dialing If you have rotary service press PROG MEM to switch to PULSE dialing If you want to switch back to touch tone service press PROG MEM to switch to TONE dialing Temporary Tone If you have a rotary pulse telephone service TONE PULSE setting is set to PULSE First dial the call normally Then activate the temporary tone feature by pressing TONE You can then press the numbers or symbols you need and your phone will send the proper signals To end the call press OFF or place the handset back in the base The phone will automatically go back to rotary pulse service Operating Instruction Storing Pauses in Memory To insert a pause in a phone number press REDIAL PAUSE Each pause entered will be four seconds in length If your phone is connected to a PBX you can store the PBX access number and a pause before the phone number For example to store 9 PAUSE 555 1234 in memory location 8 do the following 1 Press PROG Press 8 Press 9 Press REDIAL PAUSE Dial 555 1234 Press MEM DARY N Redial To redial the last number you called press TALK then press REDIAL Storing a Redial Number into Speed Dial To store the last number you dialed as a speed dial number pres
18. l until the interference has been eliminated Other electronic products can cause interference with your cordless phone Try installing your phone as far away from these types of electronic devices as possible wireless routers radios radio towers pager towers cell phones intercoms room monitors televisions personal computers kitchen appliances and other cordless phones Microwaves operate on the same frequency as your phone It is normal to experience static on your phone while the microwave is running Do not install this phone in the same outlet or near the microwave If your phone is plugged in with a modem or surge protector plug the phone or modem surge protector into a different location If this solves the problem re locate your phone or modem farther apart from one another or use a different surge protector Relocate your phone to a higher location The phone will get better reception not installed in a low area If the other phones in your home are having the issue the problem is in your wiring or local service Contact your local telephone company charges may apply My calls fade or cut in and out while I m using my handset hear other calls while using my phone Disconnect your base unit from the telephone jack and plug in a regular telephone If you still hear other calls the problem is probably in your wiring or local service Call your local telephone company hear noise in the hands
19. le for any indirect special incidental consequential or similar damages including but not limited to lost profits or revenue inability to use the product or other associated equipment the cost of substitute equipment and claims by third parties resulting from the use of this product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you 18 FCC ACTA and IC Regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission FCC rules These requirements are intended to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in ac cordance with the instructions may cause harmful interference to radio communica tions However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an
20. located below and to the left of the socket 4 Replace the battery cover by sliding it into place 5 The new battery must be charged before using your telephone Place the handset in the base unit to allow it to charge for at least 16 hours Battery Care and Performance After your battery is fully charged you can expect the following performance Operation Operating time While in use talking up to 4 hours While not in use standby up to 4 days Handset is off the base unit or charger but not in use e Battery power is consumed whenever the handset is off the base unit or charger even when the handset is not in use The longer you leave the handset off the base unit or charger the shorter you can actually talk on the handset Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use e Once the battery is fully charged you do not have to charge it again until G__I is displayed or flashes This will maximize the battery life pe CAUTION To reduce the risk of fire or injury read and follow these instructions 1 Use only the VTech battery supplied or equivalent Do not open or mutilate the battery Released electrolyte is corrosive and may cause damage to the eyes or skin It may be toxic if swallowed 3 Exercise care in handling batteries in order not to short the battery with conducting materials such as rings bracelets and ke
21. m outside the United States or used for commercial or institutional purposes including but not limited to Products used for rental purposes or 7 Product returned without valid proof of purchase see 2 below or 8 Charges for installation or set up adjustment of customer controls and installation or repair of systems outside the unit How do you get warranty service To obtain warranty service in the United States of America call 1 800 595 9511 for instructions regarding where to return the Product Before calling for service please check the users manual A check of the Product controls and features may save you a service call 17 Warranty Statement e Except as provided by applicable law you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of Product s to the service location VTech will return repaired or replaced product under this limited warranty to you transportation delivery or handling charges prepaid VTech assumes no risk for damage or loss of the Product in transit e If the Product failure is not covered by this limited warranty or proof of purchase does not meet the terms of this limited warranty VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity You must pay for the cost of repair and return shipping costs for the repair of Products that are not c
22. ne interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five The RBRC Seal The RBRC seal on the nickel cadmium battery indicates that VTech Communications Inc is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives when taken out of service within the United States and Canada The RBRC program provides a convenient alternative to placing used nickel cadmium batteries into the trash or municipal waste which may be illegal in your area VTech participation with RBRC makes it easy for you to drop off the spent battery at local retailers participating in the RBRC program or at authorized VTech product service centers Please call 1 800 8 BATTERY for information on Ni Cd battery recycling and disposal bans restrictions in your area VTech s involvement in this program is part of its commitment to protecting our environment and conserving natural resources RBRC is a registered trademark of Rechargeable Battery Recycling Corporation 21 VTECH TELECOMMUNICATIONS LTD A member of THE VTECH GROUP OF COMPANIES Distrubuted in the U S A by VTech Communications Inc Beaverton Oregon Distributed in Canada by VTech Communications Canada Ltd Suite 200 7671 Alderbridge Way Richmond B C V6X 1X9 Copyright 2005 for VTECH TEL
23. outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment To ensure safety of users the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product This product has been tested and found to comply with the FCC criteria The handset may be safely held against the ear of the user The base unit shall be installed and used such that parts of the user s body other than the hands are maintained at a distance of approximately 20 cm 8 inches or more If you choose to use a clipping device please make sure to only use the supplied VTech belt clip FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical require ments adopted by the Administrative Council for Terminal Attachments ACTA The label on the back or bottom of this equipment contains among other things a product identifier in the format US AAAEQ TXXXxX This identifier must be provided to your local telephone company upon request The plug and jack used to connect this equipment to premises wiring and the tele phone network must comply with applicable Part 68 rules and technical requirements
24. overed by this limited warranty What must you return with the Product to get warranty service 1 Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty 2 Include valid proof of purchase sales receipt identifying the Product purchased Product model and the date of purchase or receipt and 3 Provide your name complete and correct mailing address and telephone number Other Limitations e This warranty is the complete and exclusive agreement between you and VTech It supersedes all other written or oral communications related to this Product VTech provides no other warranties for this product The warranty exclusively describes all of VTech responsibilities regarding the product There are no other express warranties No one is authorized to make modifications to this limited warranty and you should not rely on any such modification State Law Rights This warranty gives you specific legal rights and you may also have other rights which vary from state to state Limitations Implied warranties including those of fitness for a particular purpose and merchantability an unwritten warranty that the product is fit for ordinary use are limited to one year from date of purchase Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you In no event shall VTech be liab
25. r phone as far away from these types of electronic devices as possible wireless routers radios radio towers pager towers cell phones intercoms room monitors televisions personal computers kitchen appliances and other cordless phones 11 Troubleshooting Problem The battery will not hold a charge The in use charging light is off Common cure for electronic equipment Suggestion e Make sure the battery is plugged into the handset e Be sure to use the AC power adaptor provided with your phone e Charge the battery in the handset for at least 16 hours For optimum daily performance return the handset to its base when not in use e Your phone might be malfunctioning Please refer to the Warranty section of this users manual for further instruction e Clean the handset and base charging contact each month using a pencil eraser or cloth e Make sure the power and line cord are plugged in correctly and firmly e Reset the base Unplug the unit s electrical power Wait for 15 seconds then plug it back in Allow up to one minute for the handset and base to reset e Your phone might be malfunctioning Please refer to the Warranty section of this user s manual for further instruction If the unit does not seem to be responding normally then try putting the handset in its base If it does not seem to respond do the following in the order listed Disconnect the power to the base Disconn
26. s PROG a location number 0 9 REDIAL MEM Troubleshooting Problem Suggestion cannot dial out e Make sure you have a dial tone before dialing The handset may take a second or two to find the base and produce a dial tone This is normal Wait an extra second before dialing Make sure your phone is set to the correct dial mode for the type of service that you have pulse or touchtone Refer to the Installation section of this user s manual to set the dial mode If the other phones in your home are having the issue the problem is in your wiring or local service Contact your local telephone company charges may apply Eliminate any background noise Noise from a television radio or other appliance may cause the phone to not dial out properly If you cannot eliminate the background noise first try muting the handset before dialing or dialing from another room in your home with less background noise My handset beeps four times and isn t performing normally Make sure the power cord is securely plugged into the base Plug the unit into a different working outlet not controlled by a wall switch Move the handset closer to the base You might have moved out of range Reset the base Unplug the unit s electrical power Wait for 15 seconds then plug it back in Allow up to one minute for the handset and base to reset Other electronic products can cause interference with your cordless phone Try installing you
27. ys The battery or conductor may overheat and cause burns 4 Do not dispose of the battery in a fire it might explode 3 Handset Features IN USE CHARGING LED VOLUME KEYS MEM KEY PROG KEY ON FLASH KEY OFF KEY REDIAL PAUSE KEY CHANNEL KEY 4 In Use Charging LED e Lights when the handset is on an active call e Flashes in unison with an incoming ring e Flashes quickly during programming mode e Flashes slowly when the battery is low e illuminates steadily when the handset is charging in the base TALK Flash Key e Press the TALK key to make a call e Ifyou are currently on a call and hear a call waiting tone press TALK to switch to the second call Press TALK again to return to the original call Volume Keys e Adjusts the volume of what you hear through the handset e While on a call press the or key to adjust the listening volume The handset will emit a double beep when the maximum or minimum volume level has been reached Off Key e Press the OFF key to exit all modes of operation Redial Pause Key e When you hear the dial tone press REDIAL to call the last number dialed on your phone e Itcanalso be used to store the last number dialed into speed dial memory See Storing a Redial Number into Speed Dial for details 5 Handset and Base Features e You can store pauses into your speed dial numbers See Storing Pauses
Download Pdf Manuals
Related Search