Verilux VP02 User's Manual
Contents
1. installation instructions on page 8 e Close supervision is recommended when this lamp is used by or near children or others who may not understand the need for these precautions Do not leave the lamp unattended during use This product may cause interference with radios cordless telephones or devices that use a wireless remote control such as televisions This lamp has been tested and found to comply with Part 18 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This lamp generates uses and can radiate radio frequency energy and if not used in accordance with the instructions may cause harmful interference to radio communications If interference occurs try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the lamp and receiver e Connect the lamp into an outlet on a circuit different from that to which the receiver is connected e Move the lamp out of the line of sight of the remote control receiver e Consult the dealer or an experienced radio TV technician for help Note This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0 45 30 MHz 4 SET UP INSTRUCTIONS Unpacking Please r2. NETIILIDX The Healthy Lighting Company Portable Deluxe vPo2 Natural Spectrum Lamp IMPORTANT SAFETY INSTRUCTIONS CAUTION e TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT DISMANTLE THERE ARE NO SERVICEABLE PARTS INSIDE e TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE The exclamation point within an equilateral triangle alerts the user to the presence of important operating and maintenance instructions in this owner s guide WARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR PERSONAL INJURY e Turn off unplug and allow to cool before replacing bulb or cleaning e Light bulbs get HOT quickly Do not touch the bulb while the lamp is on e Do not look directly at the lighted bulb e Do not operate the lamp in close proximity to flammable or combustible vapors such as aerosol spray products or where oxygen is being administered e Use only the type of bulb and maximum wattage indicated by Verilux e Never cover the lamp when it is in operation IMPORTANT SAFETY INSTRUCTIONS Read these instructions before using this lamp Keep these instructions for future reference Heed all warnings Follow all instructions Do not use this lamp in damp humid or wet locations For indoor use only Clean only with dry cloth Do not block any ventilation openings ees 2 eS SS MS Do not place near any heat sources such as radiators heat register
3. REPLACEMENT Bulb removal amp replacement REMOVAL 1 Unplug lamp from power source 2 To access the bulb remove the grid diffuser by depressing the tab and lifting it out see page 6 3 Firmly hold the bulb base B and pull bulb C from the socket in an outward motion REPLACEMENT 1 Unplug lamp from power source 2 Firmly hold base B and push bulb C into the socket A 3 Be sure bulb is firmly seated in the socket see below and snapped into the metal bulb clip D 4 Replace grid diffuser Correctly Seated Bulb Incorrectly Seated Bulb TROUBLESHOOTING Before requesting service on your Verilux lamp please read the following e Make sure all power connectors cords and plugs are inserted fully and securely e Be sure the bulb is securely seated in the socket See page 8 e Make sure there is power to the wall outlet or try another outlet not connected to a dimmer PROBLEM Light won t come on CHECK Has the plug come loose SOLUTION Insert plug securely into wall outlet Is the bulb old Check the bulb for blackening darkening at the ends an indicator of bulb life and replace bulb See www VeriluxStore com Is the bulb connected securely to the socket Be sure the bulb is securely seated into the socket repeat the bulb installation process Blackening darkening at ends of bulb Is the bulb new Sometimes when a new bulb is turned on for th
4. e first time the ends will darken but this will fade after a few minutes Is the bulb old With older bulbs darkening of the ends indicates end of bulb life This doesn t affect operation except to reduce the amount of light available since the phosphor in that area has become inactive Bulb replacement is recommended Light flickers Has the plug come loose Insert plug securely into wall outlet Is the bulb connected securely to the socket Be sure the bulb is securely seated into the socket repeat the bulb installation process Is the lamp connected to a dimmer switch Connect lamp plug only to wall outlet without a dimmer switch CARE amp CLEANING Your Verilux lamp is made from high quality materials that will last for many years with a minimum of care Clean only with a soft dry cloth DO NOT USE SOLVENTS OR CLEANERS CONTAINING ABRASIVES OR AMMONIA WARNING To prevent risk of shock or personal injury when cleaning lamp make sure you have turned off and unplugged the lamp and allow sufficient time for the bulb to cool Please visit our web site at www Verilux com NET IUX The Healthy Lighting Company 340 Mad River Park Waitsfield VT 05673 1 888 544 4865 Printed in Taiwan for Verilux Inc VP02 MAN Rev2 Copyright 2007 Verilux Inc All rights reserved
5. emove all packaging material Check the carton for the items pictured below Note For your convenience the bulb has been pre installed in the socket However it may have loosened during transit Please check to be sure it is fully seated in the socket see page 8 E a L L 4 L B JIL ALL OG SET UP INSTRUCTIONS Attaching the Parabolic Grid Diffuser 1 Remove protective packing from bulb 2 Remove grid diffuser from protective plastic bag 3 Insert plastic pegs at bottom of grid diffuser into openings near bulb socket and snap tab into place 4 Plug lamp into a standard 110 120V outlet simply open the lamp to switch it on and begin enjoying the benefits of Verilux Natural Spectrum light Note please allow a few minutes for the bulb to warm up to full illumination Note if bulb does not illuminate instantly please refer to the troubleshooting section of this manual CORD INSERTION The lamp cord may be stored completely or partially within the cavity at the back of the lamp To insert the cord simply close the lamp place it on a level surface with its face down turn the cord in a vertical position and insert the cord into the back of the lamp until all or part of the length of the cord is inserted When it is fully inserted the plug may be locked into the slot at the base of the insertion opening to avoid having the cord fall out during transit BULB
6. s stoves or other apparatus including amplifiers that produce heat 10 Do not defeat the safety purpose of the polarized plug A polarized plug has two blades with one wider than the other The wider blade is provided for your safety If the provided plug does not fit in your outlet consult an electrician for replacement of the obsolete outlet 11 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where it exits from the lamp 12 Only use attachments accessories specified by the manufacturer 13 Unplug this lamp during lightning storms or when unused for long periods of time 14 If the lamp has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen onto the lamp the lamp has been exposed to rain or moisture does not operate normally or has been dropped it should not be operated There are no user serviceable parts within this lamp SAVE THESE INSTRUCTIONS GENERAL PRECAUTIONS e Do not use with power supply voltage other than 120V AC e Avoid placing the lamp in areas that are dusty humid moist lack ventilation or are subject to constant vibration e Not for use with light dimmers timers motion detectors voltage transformers or extension cords e Do NOT use lubricating agent in bulb assembly e The light bulb may become loose during transit To reinstall the light bulb see the bulb
Download Pdf Manuals
Related Search