VDO Dayton CD 5526 X User's Manual
Contents
1. Select option AUX ON in SAM page 15 You can connect the audio output of auxiliary equipment e g in car video system instead of a CD changer to this set fig 7 using a separate accessory cable Select option AUX ON in SAM page 15 Other connections fig 8 D3 External Display Interface EDI fig 8 You can show the content of headunit on a specific car remote display via connector D3 Contact your dealer for an EDI Box of the specific car which is sold separately MOUNTING METAL SLEEVE fig 10 Install the metal sleeve dimension 182x53 mm in the dashboard For optimal performance of the CD player the metal sleeve should be positioned horizontally between 10 and 30 Fix metal sleeve into place by pressing the metal tags outwards using a screwdriver CONNECTING THE RADIO fig 9 Ensure the battery is disconnected Insert aerial plug E in the matching socket Use hook J on back of set to secure fixing Insert power supply connector A into socket A Insert loudspeaker connector B into socket B optional Remove the protective cover from socket optional Insert the yellow line out connector C1 into socket C1 optional Insert the blue CD changer connector into socket optional Insert the green connector C2 into socket C2 The green connector slides between the yellow connector C1 and the blue connector C3 You need at least one of these2. Insert the detachable front starting with the right hand side of the set Push the detachable front until it clicks into position SECURITY LIGHT The LED flashes when the detachable front is removed when the ignition is off You can switch off the flashing warning light See MENU page 15 option LEID IDENTIFICATION NUMBER This set has a unique identification number stated on the Security This card is required as a proof of ownership when the set is stolen when the detachable front is lost or when requesting service Remove the Security card before installing the set Do not keep the Security Card in your car Depending on version AUDIO ON OFF VOLUME Press rotary knob to switch on off the set Turn to adjust the volume The volume automatically increases of decreases if the SMART Volume connection has been installed and selected see installation page Please make sure you can still hear the traffic horns sirens AUDIO SETTING e Press SOUND to select desired audio mode e Adjust the settings with the rotary knob Sound style USER FLAT JAZZ VOCAL ELECTRO Y CLASSIC ROCK BASS low notes TREBLE high notes BALANCE left right FADER rear front lt 7 SLOUD OFF LOW MID HIGH e Turn the rotary knob to adjust the selected audio mode After 5 seconds the display goes back to the last mode of operation Adjustment of Bass a
3. correct way and that you have not inserted a damaged or dirty disc Distorted sound during playback Player unable to read disc CD damaged or dirty Distorted sound during CD Changer playback Player unable to read disc CD damaged or dirty CD changer is switched to digital instead analogue CD player does not function f the weather is cold there may be some condensation on the laser Use the set in radio mode for about 5 minutes to allow the moisture to evaporate Display shows NO CD or NO DISC e Check that the CD mechanism has been loaded with disc s
4. A BEEP shall be heard Short press preset button 4 or 5 to select the previous or next option Long press the preset 4 or 5 to exit the program Switch OFF and ON the accessory ignition key to reset the unit with the new pre programmed functions By turning OFF and ON the accessory ignition key the unit will then reset it s functions to the new pre programmed functions Function list as below TUNER CASSETTE CD MP3 CHANGER VOL DOWN SP Turn down the volume LP SP VOL UP Turn up the volume LP source change scrolling source LP mute SP searchup NN pexttrack SP search down previous track 4 N Fast rewind er select preset Return to the first select disc station track PRESET return to the LP first preset scan scan station Remark This function is only supported if the car steering wheel remote control is based on analogue RC3 standard For digitae standards e g CAN or MOST please consult you deater for a suitasle adapter Depending on version SETUP It is possible to modify many of the set s default settings according to your preferences via MENU Press SAM key to enter Setup Menu e Press lt q or p to select one of the options in the menu you want to modify Adjust the Rotary Knob to select the value setting Press SAM key to exit Setup Menu The set automatically leaves this mode after 30 seconds if no k
5. connections to keep C2 in place MOUNTING RADIO This radio can be properly installed either from conventional Front Mounting or Rear Mounting depending on DIN JIN opening of the car s dashboard FRONT MOUNTING Slide the radio into the metal sleeve until the springs at either side of the radio snap into the openings of the sleeve fig 11 Finally reconnect the negative car battery terminal fig 12 REMOVING RADIO using the two U brackets supplied Remove the trimplate around the front panel Insert both U brackets into the holes on the front of the set until they lock Pull out the radio fig 13 Depending on version REAR MOUNTING fig 14 Remove the trimplate around the front panel and the side springs Select a position where the screw holes of the mounting bracket and the screw holes of the radio become aligned and tighten the screws at 2 places on each side e Only use M5 selftapping screws that are not longer than 6mm REPLACING FUSE fig 9 Replace with a 10 blade type fuse The new fuse must be of exactly this value and type otherwise the set will not be adequately protected Ignoring this procedure may lead to damage to the set which will invalidate the guarantee INTERFERENCE SUPPRESSION Most modern cars have sufficient interference suppression If you experience interference generated by the car consult your dealer FRONT PANEL PRESENTATION For illustration see
6. on version CONNECTOR A fig 2 Power supply connections A7 Connect to a permanent 12V supply This is the main power supply Ensure this connection can handle a current of 104 A4 Connect to a switched 12V supply switched on off by car ignition A8 Connect to earth car chassis This connection set up will enable you to make full use of the ON OFF LOGIC function of this set limiting the use of the set to 1 hour after removal of the ignition key If this feature does not appear to be functioning as expected you may require an adaptor cable Optional connections fig 2 SDVC Speed Dependant Volume Control Intelligent volume control which automatically adjust the volume depending on your car s speed Connect pin A1 to a signal from the speedometer of your car Some cars are already prepared for it please consult your dealer To activate the SDVC volume function see SPECIAL FUNCTIONS page 12 CONNECTOR B fig 3 Loudspeakers use 4 ohm loudspeakers only Do not connect any of the loudspeaker leads to earth or directly to a booster amplifier without high level input or via an external fader You can connect the loudspeaker leads directly to an amplifier with high level input Connecting 4 loudspeakers Front Rear Left B5 B7 Left B6 B8 Right B3 B1 Right B4 B2 CONNECTOR C1 Connector C1 for Pre out fig 4 Connect a power amplifier with 2 4 additional loudspeaker to t
7. page 3 figure A ITEM E Select preset 1 RND mn Store preset 2 SH Select preset2 ei e E Select preset 2 3 Je Select preset 3 Repeat track SON Sean rack sH Select preset 4 bip c ae SP LH Store preset SP Random track Select sound audio styles SE next style C TA ar e TA on off Push on off power Turn adjust volume BAND sH Select band x Display ID3 Display ID3 S m Ea SE Source change scrolling SAM Setup SAM Manualtuning fast forward LP Manualtuning fast rewind Select the previous WANDU SP available Go DIR 10 track Up e MP3 with DIR DIR Up 10 track up e MP3 with DIR DIR Up Select the next without SP available disc DIR 10 track down 10 track down MP3 with DIR DIR down v LP MP3 with DIR DIR down AST Auto store Brightness MUTE Mute A W Eject disc REL Release the front Note SP Short press LP Long press Depending on version 8 SECURITY For theft protection this set is provided with the following security features DETACHABLE FRONT Take the detachable front with you when leaving the car Keep itin its protective box Always apply the detachable front before starting to drive To remove the front see page 3 figure B Press REL to release the detachable front Pull out the left hand corner of the detachable front to remove the front To apply the front see page 3 figure C
8. ANNEL 2V Full detach 180x51x160mm ZN Warning To prevent short circuiting disconnect the negative car battery terminal until the set has been mounted and connected fig 1 See separate installation card Only trained specialists may install the unit Always observe correct assignment of vehicle connections Incorrect assignment of the connections may lead to damage of the unit or vehicle electrical system electronics Observe automotive industry quality standards Fire hazard When drilling care must be taken not to damage concealed wiring harnesses the fuel tank and fuel lines Never drill into supporting or safety relevant body parts INSTALLATION Connection in vehicles equipped with standard ISO connectors The radio may be installed without major preparation in vehicles equipped with ISO standard connectors Some signals may have to be adapted or connected to the ISO connectors see separate installation card Connection in vehicles without standard ISO connectors For vehicles with different connection requirements ask your dealer for an adapter cable If no adapter cable is available for your vehicle connect the radio as described see separate installation card PREPARATION Voltage and polarity The set must be connected to a 12V car battery with negative terminal to earth car chassis Installation in vehicles not fulfilling these requirements could result in malfunction damage or fire Depending
9. KOU CD 5626X CD 5526X User manual Mode d emploi Bedienungsanleitung Gebruiksaanwijzing Istruzioni d uso Instrucciones de manejo Modo de empr ego Bruksanvisning Betjeningsvejledning K ytt ohje www vdodayton com Deutsch Francais English Nederlands o IS E 42 Svenska Portugu s Espa ol Dansk Suomi CONNECTOR OVERVIEW M TN N C A A A3 M IGNITION A A Al C2 STEERING WHEEL REMOTE CONTROL ol REMOTE CONTROL INTERFACE C9 REMOTE CONTROL INTERFACE GND C10 6 ILLUMINATION SIGNAL POWER A8 GROUND B4 B5 1 Gouwen L L 13 14 15 1 12C clock 2 12C data RC3 remode control SDVC speed signal 12V permanent power 1 B 8 REAR LEFT B REAR LEFT C5 REAR RIGHT pp REMOTE AMPLIFIER Iz Pr I lily REMOTE CONTROL C2 e u AAAA amp kdB Black Tel reference White Tel audio 19 1613 10 7 4 1 Pink Tel mute Proper disposition for all scraps Please place in bins for electronic parts for environment protection CLASS 1 LASER PRODUCT coros SOUND 4 7 TA AF PRESET D TA AF PRESET eos S0UNDV V BEFORE YOU STARI Thank you for purchasing our product which has been designed and manufactured to the highest standards and subjected to rigorous testing Please read this information carefully and follow all instructions outlined below This will ensure the reliable operation and long s
10. NIT INT EVENT SPD SPEED COLOR Value Setting Rotary Knob TEL 1 TEL 2 TEL 3 1 O 1 ON OFF KM MIL SERVICE OIL TYPES BRAKE WASHER WATER SPD ON SPD OFF O G D Depending on version 16 Usage Select the TEL IN volume level Select the viewing angle of the set s display Actiate deactive the function of sire remote control Select distance unit Select the interval distance of service Select reminding event only vaild when car speed is calibrated Select SPD ON to activate the speed warning function only valid when car speed calibrated Select the warning speed figure Select the color of the button illumination TROUBLE SHOOTING There may be times when you suspect that your car radio is not functioning as you would expect it to Before calling for service please read the operating installation instructions and review the following checklists You may find that an apparent malfunction can easily be rectified Ifyou still have to send your set for service always send the complete set with detachable panel Do not try to open the set to service it yourself Audio Set does not function No Display Check fuse set and car and connections Check the operating voltage Set functions but no sound Adjust the volume of the set Check fader and balance settings Check aerial and its connection e f car phone is connected see SAM page 15 check o
11. ach track is scanned see SAM page 15 option SCANTIME DISC EJECT CD PLAYER e Press to eject the disc SPECIAL FUNCTIONS Setting the clock manually e See SAM page15 option CLOCK Note You can select 12 hour or 24 hour clock display See SAM page 15 option CLOCKSET RDS clock auto update You can select an automatic update of the clock via the RDS radio signal e See SAM page 15 option CLOCK The transmitted time via RDS can be incorrect SDVC Speed Dependent Volume Control see INSTALLATION page 5 for connection instructions To compensate for surrounding noise this function automatically increase the volume of the set with respect to the car s speed Four compensation levels can be selected Level 1 Depending on version 12 gives a small increase while level 4 gives a greater increase See SAM page 5 option S VOL to select the level until you find one which suits your car Setting the service reminder e See SAM option SERIVCE PAGE 16 You can select the service distance unit e See SAM option UINT PAGE16 You can select the inteval distance of service See SAM option INT page 16 to select the right interval distance You can select the service even e See SAM option EVENT page 16 to select the reminder event you want Note SERVICE function is only valid when car speed calibrated Speed warning You can set a safety speed wh
12. confirmation beeps Select the tuner according to European American or Asia standards Select HDS OFF to switch off RDS feature Select HEG ON to maintain regional programme Select REG AUTO to switch programme when the next signal is stronger Select HEG OFF to directly switch to the programme of the next region Select OFF to prevent the radio from returning to Altemative Frequencies Option Value Setting Usage or p Rotary Knob NEWS ON OFF Activate deactivate NEWS features MW MW ON MW OFF Select OFF to suppress MW when not required LW LW ON LWOFF Select OFF to suppress LW when not required SRCH SRCH REG SRCH LOC SRCH DX Select the right searching sensitivity TAEON DX LOCAL With local only strongest EON TA stations are selected with DX also stations with a lower fieldstrength are used MULT S MULTSON MULT OFF Select OFF guarantees reading of copyprotected discs SCN TIME SCAN5SEC SCAN 10SEC Select the scan time station or track SCAN 20SEC SCROLL SCROLL ON SCROLL ONCE Select NOSCROLL display shows running play time mode SCROLL OFF Select SCH ONCE to display the directory and the song title only once CLOCK CLOCK OFF CLOCK MAN Select CLOCK RDS to activate RDS clock or CLOCK MAN CLOCK RDS to set clock manually CLOCK 12HCLOCK Select clock format between 12h format and 24h format FORMAT 24HCLOCK SET CLOCK if CLOCK MAN selec
13. d of album is reached the playing function continues with the first track of the next album Notes on MP3 WMA The unit cannot read a music file that has a file extension other than MP3 Depending on version The unit can play up to maximum 300 tracks and support maximum 50 directories per disc The unit may not play the first tracks in the order of track number or in the order that you wrote them to the disc The unit may not play the first session if the disc contains both CD audio tracks and MP3 files When playing a disc of 8kbps or Variable Bit Rate VBR the elapsed play time in the display window may not be accurate To display up to 30 characters for a track name or artist s name ID3 Tag version 1 1 is required Characters other than uppercase lowercase letter Aa to Zz and underscore _ may not be displayed To enjoy high quality sound we recommend conversion sampling frequency of 44 1kHz and a fixed bit rate of 128kbps Make sure that a CD R CD RW is formatted as a data disc and NOT as an audio disc MP3 files are not compatible with packet write data transfer Playing a CD R or CD RW Depending on the type of CD R CD RW CD surface condition of the disc as well as the performance of the CD writer certain CD R CD RW CD may not operate normally on this unit Copy protected CD playback This CD player is able to play most of the copy protected CDs in the market CDs t
14. en your drive speed is faster than your setting safety speed the radio will remind you See SAM option SPD PAGE13 to set your safety speed Note This function is only valid when car speed is calibrated To calibrate To avoid unnecessary distraction we advise that this procedure is carried out with the help of somebody else 1 While stationary hold down the P key and SOUND key at the same time 2 The set mutes Display shows RECALIB 50KM H 30 MPH alternately 3 Now drive to 50 KM H 30 MPH Always obey the highway code and current traffic restrictions and conditions 4 Once 50KM H 30 MPH is reached press MENU key You hear a beep and display shows CALIB OK 5 Now turn the set off and then on again to return to normal operation Level 2 is chosen for SDVC off set CAR STEERING WHEEL REMOTE CONTROL G A car steering wheel remote control can be connected to operate main functions of this radio see also page 6 you can programme up to 6 buttons of your car remote control to operate your radio You can program the wire remote control following these steps Enter the SAM Select the SWRC ON Long Press the preset button 4 to start the program When it displays VOL DOWN please press the corresponding button on your remote control Whilst holding down the VOL DOWN button on the steering wheel remote control press the preset button 1 to confirm your setting
15. ervice life of your radio Keep this manual handy in your car for future reference ENVIRONMENT This booklet is printed on low chlorine recyclable paper IMPORTANT This device has been designed and produced according to applicable Safety Regulations Please read carefully the instruction manual and use the device as intended CONTENTS PAGE ize 16 mp lp E 4 INSTALLATION 5 F REPARATION 5 Vel cc ERNE 7 FRONT PANEL PRESENTACION sacada 8 SECURITY E 9 AUDI ars e usha 9 RADIO PR 10 RADIO DATA SYSTEM RADSON PM cda 10 EE 11 SPECIAL FUN TO Noain sa 12 RE 14 TROUBLE SHOOTIN Aia 17 TECHNICAL AND FUNCTION DATA Power Supply Max Power Sinus Power Illumination Steering Wheel Remote Control Changer Aux In CLOCK Current consumption off state External Display Interface EDI Speed Dependant Volume Control Preampout Front Panel Dimensions wxhxd Tel In MP3 WMA CD5526X 12V 4x35w 4x19w switchable orange green dual 2 CHANNEL 2V Full detach 180x51x160mm Note Support ed Not Supported 4 CD5626X 12V 4x45w 4x22W switchable orange green dual 4 CH
16. ey presses are made Option 4 or START SDVC TAVOL TAOFFSET TAFADE CD CDC AUX IN SILENT BEEP RADIO HEG Value Setting Rotary Knob 8 to 47 OFF 1 2 3 4 8 to 47 2 1 0 1 2 _ _ _1_ 0 1 7 2 1 0 1 2 2 1 0 1 2 2 1 0 1 2 SILENT MUTE1 MUTE3 OFF 1 2 3 4 5 EUROPE ASIA LATIN AMERICA RDS OFF RDS ON REG ON REG AUTO REGOFF ON OFF Depending on version 14 Usage Select the start up volume when power on After modification of the start up volume if the set is switched off and on within 10 minutes the start up volume reverts to the last used volume setting After modification of the start up volume if the set is switched off and on after more than 10 minutes later the start up volume is the level defined in SETUP Select the speed dependant volume contol only when connected and calibrated see SDVC Volume in INSTALLATION and SPECIAL FUNCTIONS Level 1 provides a smaller increase while level 4 provides a greater increase with respect to the car s speed Select volume level of Traffic Announcement News bulletins and Alarm messages Volume level of TA to normal radio station Ajust traffica announcement sound position Volume level of CD relative to tuner Volume level of CDC relative to tuner Volume level of AUX IN relative to tuner Select mute level Select volume level of
17. hat use copy protection schemes which are non conformance to international audio CDs standards Red Book may not be supported by this unit CHANGER PLAYBACK IF CONNECTED You can connect an analogue compatible changer to this set Check that the magazine is loaded with discs and inserted in the changer Press SOURCE to select changer as the Source Press Aor V to select the desired disc For Changer press long press A or Y to change desired directory At the end of the disc playback automatically continues with the next disc Any missing disc is automatically skipped By using an optional adapter you can also connect additional audio sources e g iPod to the radio via the changer control PREVIOUS NEXT TRACK 4 or p Short press the 4 or p button to select the desired track Playback resumes with the chosen track FAST REWIND FAST FORWARD 4 or p e Long press the or p button for more than 2 seconds to quickly move rewind or forward through the disc Normal playback resumes when you release the button RANDOM TRACK PLAYBACK e Press RND to activate deactivate Random track playback REPEAT TRACK Press RPT to activate deactivate Repeat current track SCAN TRACK The scan function enables you to listen to the first few seconds of each track Press SCN to activate deactivate Scan track e Press 4 or p to start the scanning Note You can select how many seconds e
18. his set with the RCA cable Connect Red socket to Right channel and white socket to Left channel Connect fly lead wire to Amplifier Remote on off Depending on version 6 Connector C2 fig 5 Car steering wheel remote control Main functions of this radio can be operated by the car steering wheel remote control if this remote control is based on 2 wire RC3 standard it can directy be connected A programming step described on page 13 is needed to teach in the specific functions If your car remote control is not supported by this radio please consult your dealer for specific adapter solution Use a C2 mini ISO casle to connect your car remote control to the head unit Wire of Telephone Mute If your car telephone or the car kit of your mobile phone provides a mute signal it can be used to automatically interrupt the set s sound output Connect the telephone mute wire to the Pink lead wire See SAM page 15 select option and set MUTE LO or MUTE HI according to phone type to automatically interrupt the set s sound output when using your car phone Flylead for TEL IN audio input If your car telephone or the car kit of your mobile phone proviaes audio signal You can via this cable to input the audio to the headunit Connector C3 for our analogue DVD MP3 CD changer or an Auxiliary equipment available separately You can connect our analogue DVD MP3 CD changer to this set fig 6
19. nd Treble setting is only possible when USER is selected as the sound style SOUND Whether you listen to Jazz Vocal Pop Classic or Rock music the SOUND button is the perfect setting for your choice e Press SOUND and then adjust the settings with the rotary knob to select one of the predefined sound styles USER Your own settings of bass and treble Y FLAT Original JAZZ Jazz music VOCAL Speech ELECTRO Pop music CLASSIC Classical music ROCK Rock music MUTE silence e Press MUTE key to mute demute the sound when the set is switched on Note You can adjust the mute level The volume may be louder during mute when the mute level is higher e g 12 than the current volume e g 5 See SETUP option MUTE SOURCE e Press SOURCE to select the desired source TUNER 4 CD MP3 LJ CD CHANGER RADIO WAVEBAND e Press BAND to select the desired band CM FM AST S5 LW lt MWAST AMAST MW lt AUTOMATIC SEARCH Use search tuning to automatically search for a station Press 4 to tune to a station of a lower frequency or p to a higher frequency To search for another station press the key again Note You can select the search sensitivity for FM See SAM page14 Option REG LOC DX Manual tuning if you know the frequency of the required station To switch to manual tuning Long press the search but
20. ption TEL HFREE Set mutes and display shows TEL MUTE or HRFEE but the car telephone is in used e See SAM page 15 check option HEREE The sound from the speakers is reduced automatically built in safety circuity prevents the temperature in the set from exceeding a certain level Wait for the temperature to decrease before increasing the volume Radio Cannot tune to desired station Check that the aerial is fully extended and properly connected Check that the negative terminal brown lead is connected to earth car chassis Desired station is too weak try Manual Tuning Display shows frequency not station name e Set is tuned to non RDS station RDS function is switched off Hadio mutes momentarily while display shows SEARCH and station name frequency alternately Set is checking a list of Alternative Frequencies AF for the tuned radio station as reception is weak In case no AF is transmitted for the tuned station switch off AF Depending on version Display shows NO TA and set beeps at intervals The tuned station becomes too weak to enable the reception of Traffic Announcements Use search tuning to find another station e f the TA mode is switched on search tuning only selects stations which enable the reception of Traffic Announcements CD MP3 CHANGER Display shows CD ERHR and set beeps Check that the disc have been inserted in the
21. rmations in order to offer you many advantages including PROGRAM SERVICE NAME PS Allows the radio to display the name of the station instead of its frequency AUTOMATIC RETUNING AF The set remains tuned to the current station by continually searching the best alternative frequency for best reception Note You can switch AF off Activate Deactivate AF This set continuously search for other alternative frequencies for the tuned radio station and automatically selects the best frequency for reception Long press De for more than 2 seconds to activate deactivate AF ALARM MESSAGES PTY ALARM This set automatically receives emergency messages made by the broadcaster During the messages the display shows ALARM and the station name alternately TRAFFIC ANNOUNCEMENTS TA You can activate the T modes to give priority so as to hear traffic announcements related to these subjects even if you play a CD or mute the set Activate Deactivate TA Short press BAND to select an FM band e Press to activate deactivate TA Activate Deactivate NEWS Press BAND to select an FM waveband See SAM page 15 select option NEWS set the value to ONT If you activate TA NEWS mode You will hear the Traffic Announcements News Announcements f the tuned station does not enable the reception of Traffic Announcements the display shows NO TA The radio automatically searches an appropria
22. te station News announcements may be interrupted by Traffic Announcements if the T mode is switched on Interrupting Traffic Announcement News mode If you do not wish to continue listening to a particular Traffic Announcement e Short press Da key to interrupt TA NEWS without switching off the mode The set will return to the previous operating mode Note You can switch off RDS features if not required Long press RDS key to switch off RDS All RDS related features e g TA etc will be deactivated when RDS is switch off TA EON To keep you receive the traffic information in time Note You can select the search sensitivity for TA See SAM option EON page 15 CD MP3 PLAYER and CHANGER CD PLAYBACK This CD player is suitable only for 12cm disc do not use irregular shaped CD Slide the disc into the slot with label facing upwards Playback starts If disc is already inserted Press SOURCE to select CD as the source Playback starts Compressed Audio playback On top of the usual audio playback you are able to listen to compressed music files that conform to MPEG 1 2 amp 2 5 layer 3 at bit rate up to 320kbps or Variable Bit Rate VBR or WMA decoding ver 9 or lower ID3 Tag version 1 and 2 are both supported changing Directory in MP3 Playback begins on the first file in the chosen directory Press or Y to select desired directory When the en
23. ted set the time d to adjust the hour digit p to adjust the minute digit LED ON OFF Select OFF to switch off the flashing warning light when the detachable panel is removed with ignition off LOGIC ON OFF Select ON to limit the use of the set to one hour when the car ignition is switch off select OFF to prevent the set from turning on when the car ignition is switch off only when A7 and A4 are connected correctly EDI ON OFF Select ON when external EDI Box is connected AUX ON OFF Select ON when auxiliary is connected TEL TEL OFF MUTE LO Select TEL OFF if no car phone is connected to the set MUTE HI TELINLO TELIN HI Depending on version MUTE Playback on current source is automatically interrupted when the car phone is in use Select MUTE HI or MUTE LO if only the mute line is connected to the radio see installation instructions MUTE HI Radio switches to MUTE at 12V MUTE LO Radio switches to MUTE at OV according to phone type TEL IN Playback on current source is automatically interrupted when the car phone is in use and the incoming call is played on the car speakers Select or TEL IN LO if your telephone input connected to the Radio see installation instructions TEL IN HI Radio switches to to telephone source at 12 V TEL IN LO Radio switches to telephone source at OV according to phone type 15 Option dor p TEL ANGLE SWRC U
24. ton lt q or p for more than 2 seconds will switch the tuning to manual tuning e Then press to tune to a station of a lower frequency or to a higher frequency When keys are released a time out start to count After 5 seconds time out display Auto for one second and return to automatic search PRESELECTED STATIONS Manually storing stations in a preset Five stations per band can be stored and recalled using the preset keys 1 to 5 Tune in to the desired station Press the desired preset key 1 to 5 for more than 2 seconds to store the current tuned station When storing an FM station the current Program Station Name and the AF mode are stored on the preset Some stations use alternating Program Service Name Recalling a preset Press the desired preset key 1 to 5 to recall the stored station Automatically storing stations AUTO STORE You can automatically store 5 strongest FM stations on the FM AST band or 5 strongest MW AM stations on the MW AM AST band When you use Auto Store the new stations replace any stations previously stored in the FM AST band or the MW AM AST band Press AST to activate autostore The set gives a beep and then mutes When it has finished you hear a beep followed Depending on version 10 by the station stored on preset 1 Sometimes it may not be possible to find 5 stations RADIO DATA SYSTEM RDS ON FM More and more stations broadcasts RDS info
Download Pdf Manuals
Related Search