Toshiba SD2010 User's Manual
Contents
1. Using the Misc Miscellaneous setup menu Press SETUP on the remote control gt The system setup menu appears Use Default Settings DivX Registration DivX Deregistration Press A Y to select Misc then press P Press A W to select an item then press OK to access Example Use Default Settings gt The options for the selected item appears gt If the selection in the menu is greyed out that means the feature is not available or not possible to change at the current state Use P to select a setting and press OK to confirm Example No gt The setting is selected and setup is completed To exit press SETUP Restoring to original settings Setting the Use Default Settings function will reset all options and your personal settings to the factory defaults except your password and rating level In Misc press A W to select Use Default Settings then press OK gt The menu will appear Use Default Settings Yes Select this to reset to factory default settings No Select this to close the menu Use P to select a setting and press OK to confirm To exit press SETUP DivX Registration Divx registration code allows you to rent and purchase movies using the Divx VOD service from the internet For more information visit website www divx com vod In Misc press A F to select DivX Registration then press OK gt The reg2. High For High speed it will not play the converting track but it converts faster Quality Best High Medium Low Best The converted MP3 s with the biggest transfer bit rate and the biggest size High The converted MP3 s with the bigger transfer bit rate and the bigger size Medium The converted MP3 s with the normal transfer bit rate and the normal size Low The converted MP3 s with the smallest transfer bit rate and the smallest size Create ID3 On Off On Create ID3 with the converted MP3 Off Does not create ID3 with the converted MP3 Tips The player can only support up to 500 files or 198 folders If there are more than 500 files or 198 folders total in disc and USB as a result of this converting converting will be stopped and a message Too many files or folders in device will appear on the screen The total number of files in the CD which user would like Helpful hint The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs 18 Playback Feature DVD Menu Options to convert and the number of files which already stored in the USB should be less than 500 files You can find the converted MP3 files in the folder named CONVERT in the USB device For every converting a new sub directory by the name between 000 to 196 will be created Software will search for an empty slot between 000 to
3. Press SETUP Press A F to select Language then press gt Press A to highlight one of the options below then press Subtitle Select this to change the subtitle language DivX Subtitle Select this to change the DivX subtitle language Audio Select this to change the disc soundtrack language DVD Menu Select this to change the language of the disc menu Use A F to select a language and press OK to confirm Repeat steps O for other language settings IMPORTANT DVD discs and players are designed with regional restrictions Before playing a disc make sure the disc is for the same zone as your player If appears on the TV screen when a button is pressed it means the function is not available on the current disc or at the current time Playable discs Using this DVD player you can playback on the following discs Some of these discs may be incompatible DVD Video disc Digital Versatile Disc VIDEO DVDIR RW DVD Recordable Re writable DVDR DL Dual layer of DVD DVD Video format or Audio Video R o formats e g MP3 JPEG and DivX files RW CD R CD Recordable COMPACT Audio Video formats e g MP3 ose JPEG and DivX files CD RW CD Rewritable COMPACT 5 Audio Video formats e g MP3 JPEG and DivX files Audio CD Compact Disc compact Digital Audio DIGITAL AUDIO Video CD diet ideo Formats 1 0
4. not the first time registered or not registered You can select DivX Registration to get the 10 character DivX VOD Registration Code or select DivX Deregistration to get the 8 character deregistration code then use the code to register deregister the DVD player at http www divx com vod Tray Lock Press SETUP button then press the number button 2006 in sequence to lock the tray All functionality of the player and playback remain the same except for the OPEN CLOSE button After the tray is locked Tray Lock Is On will appear on the screen when OPEN CLOSE is pressed To unlock the tray just follow the same procedure as above Specifications DVD Player Outputs Supplied Accessories DVD Player Power supply 110 V 240 V AC 50 60 Hz Power Consumption 12W standby lt 1W Net weight 1 48 kg External dismensions 430 X 43 X 209 mm W H D Signal System PAL NTSC Semiconductor laser wavelength 657 790 nm 96 kHz sampling 4 Hz to 44 kHz Below measurable level less than 0 001 W PEAK Outputs Video output SCART 1 0 V p p 75 Q SCART socket x 1 Y 1 0 V p p 75 Q pin jack x 1 P B P R 700 mV p p 75 Q pin jack x 2 Supplied Accessories Remote control SE R0335 Batteries AAA The model complies with the above specifications Designs and specifications are subject to change without notice This model may not be compatible with features and or specif
5. versa Choose zero 0 for average setting Color Increase the value to enhance the colour in your picture or vice versa Choose zero 0 to balance the colour Press P to adjust the setting that best suits your personal preference Repeat steps to adjust your picture preference Press A Y to select Close and press OK to confirm JPEG Interval You can continuously playback all JPEG files automatically Set JPEG Interval to 5 Seconds 10 Seconds or 15 Seconds In Video press A W to select JPEG Interval then press P Off Plays back one file at a time 5 Seconds Plays back images in the form of a slide show at 5 seconds intervals 10 Seconds Plays back images in the form of a slide show at 10 seconds intervals 15 Seconds Plays back images in the form of a slide show at 15 seconds intervals Use A F to select a setting and press OK to confirm Helpful hint Press lt to go back to previous menu item Press SETUP to exit the menu item Using the Audio setup menu Press SETUP on the remote control gt The system setup menu appears Digital Output Language FA Video Es Night Mode Down Sampling 3D Effects 6 Rating E Misc Press A Y to select Audio then press P Press A Y to select an item then press to access Example Night Mode gt The options for the selected item appears gt If the selection in the men
6. indicated To completely reset the player unplug the AC cord from AC outlet for 5 10 seconds Troubleshooting Player does not respond to some operating Operations may not be permitted by the disc commands during playback Refer to the instructions of the disc jacket DVD Player cannot read CDs DVDs Use a commonly available cleaning CD DVD to clean the lens before sending the DVD Player for repair Menu items cannot be selected Press STOP twice before selecting system setup menu Depending on the disc availability some menu items cannot be selected Unable to select Progressive Scan on off Ensure that the output of the Video Out signal is switch to P Scan Component 20 Glossary Analogue audio An electrical signal that directly represents sound In contrast digital audio can also be an electrical signal but is an indirect representation of sound See also Digital audio Aspect ratio The width of a TV screen relative to it is height Conventional TVs are 4 3 i e the screen is almost square Widescreen models are 16 9 the screen is almost twice as wide as its height AUDIO OUT jacks Jacks on the back of the DVD System that send audio to another system TV Stereo etc Bit rate The amount of data used to hold a given length of music measured in kilobits per seconds or kbps Or the speed at which you record Generally the higher the bit rate or the higher the recording s
7. or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 12 Unplug this apparatus during lightning storms or when unused for long periods of time 13 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 14 Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 15 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus 16 Keep your fingers well clear of the disc tray as it is closing Neglecting to do so may cause serious personal injury 17 Do not place a heavy object on or step on the apparatus The object may fall causing serious personal injury and serious damage to the apparatus Sno eS eS Introduction 18 Do not use a cracked deformed or repaired disc These discs are easily broken and may cause serious personal injury and apparatus malfunction 19 If the apparatus should smoke or smell immediately disconnect the power cord from the wall outlet Wait until the smoke or smell stops then ask your dealer
8. s manual carefully and retain for future reference Should the unit require maintenance contact an authorized service location Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure To prevent direct exposure to laser beam do not try to open the enclosure Visible and invisible laser radiation when open and interlocks defeated DO NOT STARE INTO BEAM CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so Be aware that this equipment is still powered when in standby mode To disconnect this equipment completely from the mains power pull out the power plug from the wall outlet Environmental Information All unnecessary packaging has been omitted The packaging has been made easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your DVD player consists of materials which can be recycled and reused if disassembled by a specialised company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment LASER Type Semiconductor laser InGaAIP DVD AlGaAs CD Wave length 657 nm DVD 790 nm CD Output Power 5 5 mW DVD 7 0 mW VCD CD Beam
9. MAY RESULT IN HAZARDOUS RADIATION EXPOSURE Changes or modifications made to this equipment not expressly approved by Toshiba or parties authorized by Toshiba could void the user s authority to operate the equipment IMPORTANT SAFETY INSTRUCTIONS This unit has been designed and manufactured to assure personal safety Improper use can result in electric shock or fire hazard The safeguards incorporated in this unit will protect you if you observe the following procedures for installation use and servicing This unit is fully transistorized and does not contain any parts that can be repaired by the user DO NOT REMOVE THE CABINET COVER OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY Read these instructions Keep these instructions Read all warnings Follow all instructions Do not use this appliance near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 10 Only use attachments accessories specified by the manufacturer 11 Use only with the cart stand tripod bracket or table specified by the manufacturer
10. and endlessly If Repeat Single is selected Random cannot be Helpful hint The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs 17 selected and vice versa Edit Mode Program operation works only when Edit Mode is selected After finished storing the files tracks you want into the Program View list select Edit Mode again and press OK to release edit mode Program View To view tracks files in the Program View list It is disabled if the Program View list is empty Add To Program Add files tracks to the Program View list It is disabled if Edit Mode is not selected The maximum number of files tracks can be added is 30 Browser View To view files tracks in the Original View list Clear Program Delete the files tracks in the Program View list gt Select a file track or more you want to delete in stop mode y will appear besides the deleted file track Select Clear Program and then press OK It is disabled if Edit mode is not selected Preview JPEG During playback press TITLE to view a page of 9 thumbnail images e Use A V 4 P to select an image Press OK to view the selected image in full screen and subsequent images will be displayed one after another automatically See page 21 for JPEG Interval setting Press PREV d NEXT to view the previous or next thumbnail screen Zoom pict
11. channel VCD Skip to previous next chapter track ZOOM 15 18 Enlarge a picture on the TV 15 REPEAT TOSHIBA Selects various repeat mode SE R0335 RANDOM 17 16 JA B Toggles between Normal and Repeats playback from point A to B on Random playback a disc PROG 15 15 SLOW To program playback or cancel the Do a slow forward program playback 15 CLEAR USBI 19 Delete the mistyped entries or cancel To call up the DISC USB mode some functions selection menu 11 Getting Started Inserting Batteries Open the battery compartment Insert two batteries type RO3 or AAA following the indications inside the compartment Close the cover CAUTION Never throw batteries into a fire The batteries shall not be exposed to excessive heat such as sunshine fire or the like Note Be sure to use AAA size batteries Dispose of batteries in a designated disposal area Batteries should always be disposed of with the environment in mind Always dispose of batteries in accordance with applicable laws and regulations If the remote control does not operate correctly or if the operating range becomes reduced replace batteries with new ones When necessary to replace batteries in the remote control always replace both batteries with new ones Never mix battery types or use new and used batteries in combination Always remove batteries from remote control if they are dead or
12. divergence 60 degrees Where the MAINS plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable In the spaces provided below record the Model and Serial No located on the rear panel of your DVD video player Model No Serial No Retain this information for future reference WARNING RISK OF ELECTRIC SHOCK Never attempt to service this product yourself Opening and removing the covers may expose you to dangerous voltage or other hazards Failure to follow this WARNING may result in death or serious injury Refer all servicing not specified in this manual to a Toshiba Authorized Service Center E Setup E Finding a suitable location Place the set on a flat hard and stable surface Do not place the set on a carpet Do not position the set on top of other equipment that might heat it up e g receiver or amplifier Do not put anything under the set e g CDs magazines Install this unit near the AC outlet and where the AC power plug can be reached easily Space for ventilation Place the apparatus in a location with adequate ventilation to prevent internal heat build up Allow at least 10 cm 4 0 clearance from the rear and the top of the set and 5 cm 2 0 from the left and right to prevent overheating 5cm 2 0 10cm 4 0 G gt Ca ae Avoid high temperatures moisture water and dust Apparatus shall not be e
13. for movie discs with Dolby Digital mode DVD Menu Options 2 Use A F to select a setting and press OK to confirm Down Sampling You can enable and disable the digital signal for better sound output quality In Audio press A Y to select Down Sampling then press gt Off If your amplifier decoder is compatible with 96 KHz PCM select Off Sound is sampled at 96 KHz On If your amplifier decoder is not compatible with 96 KHz PCM select On Sound recorded at 96 KHz is down sampled to 48 KHz Use A to select a setting and press OK to confirm Tip When playing back disc with copyright protection the sound will be down sampled to 48 KHz even when ff select Down m off To obtain expansive virtual surround sound effects from two speakers set 3D Effects to on This enhancement sounds only output from the Analogue AUDIO OUT L R jacks of the DVD player In Audio press A W to select 3D Effects then press You can set to Off or On Use A F to select a setting and press OK to confirm Tip Only effective in playback of a DVD Video disc with Dolby Digital 5 1 bitstream Using the Rating setup menu Press SETUP on the remote control gt The system setup menu appears Parental control 8 Adult Set Password Press A Y to select Rating then press gt Press A Y to select an item then press to access Example Pare
14. from the beginning of the preceding track Helpful hint The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs a ON Playback Feature oo oo During playback pressing RETURN will return to the menu screen if PBC is on If you want to skip the index menu and playback directly from the beginning Press MENU on the remote control to turn the PBC off Playing a DivX Disc This DVD player supports the DivX movie playback that you download from your computer onto a CD R RW or DVD R RW see pages 13 14 for more information Load a DivX disc The data disc menu appears on the TV screen Press A F to select the folder and press OK to open the folder Press A F to select a file Press OK to confirm Press SUBTITLE on the remote control will turn on or off the subtitle f multilingual subtitles are embedded on the Divx disc pressing SUBTITLE will change the subtitle language during playback Tips Subtitle files with the following filename extensions srt smi sub ssa txt ass are supported but do not appear on the file navigation menu The subtitle filename sub has to be saved under the same filename as the movie avi in the same folder For example Folder A abc avi and abc sub Playing MP3 JPEG Kodak picture CD IMPORTANT You have to turn on your TV and set to the c
15. if the remote control is not to be used for an extended period of time This will prevent battery acid from leaking into the battery compartment Using the Remote Control to Operate the System Aim the Remote Control directly at the remote sensor IR on the front panel Do not put any objects between the Remote Control and DVD Player while operating the DVD Player Finding your viewing channel Press 1 0 ON STANDBY on the DVD player to turn it on Turn on the TV and set it to the correct Video In channel You should see the blue DVD background screen oo QO gt Usually these channels are between the lowest and highest channels and may be called FRONT A V IN or VIDEO See your TV s manual for more details gt Or you may go to channel 1 on your TV then press the Channel down button repeatedly until you see the Video In channel gt Or the TV remote control may have a button that chooses different video modes If you are using external equipment such as audio system or receiver turn it on and select the appropriate input source for the DVD player output Refer to the equipment user s manual for detail EE Setting up Progressive Scan feature For Progressive Scan TV only The progressive scan display twice the number of frames per seconds than interlaced scanning ordinary normal TV system With nearly double the number of lines progressive scan offers higher picture resoluti
16. may be programmed on the disc Some DVD video discs allow you to change subtitle selections only via the disc menu If this is the case press the MENU button and choose the appropriate subtitle language from the selection on the disc menu Some DVD video discs may not be played ina different audio language that you selected A prior language may be programmed on the disc Some DVD discs may not include your pre selected language In this case the DVD player automatically displays disc menus consistent with the disc s initial language setting DivX Subtitle If your DivX files include a subtitle file see page 17 for the supported file formats you may select a supported DivX subtitle language by region In Language press A F to select DivX Subtitle then press P DVD Menu Options Standard Albanian Danish Dutch English Finnish French Gaelic German Italian Kurdish Latin Norwegian Portuguese Spanish Swedish and Turkish Central European Albanian Croat Czech Dutch English German Hungarian Irish Polish Romanian Slovak Slovene and Sorbian Cyrillic Bulgarian Belorussian English Macedonian Moldavian Russian Serbian and Ukrainian Greek English and Modern Greek only Hebrew English and Modern Hebrew only Use A F to select a setting and press OK to confirm Using the Video setup menu Press SETUP on the remote control gt The system setup m
17. or time 0 cannot be input as the first number This function only apply to DVD VCD CD SVCD Press OK to confirm gt The playback skips to the selected title chapter track time When m information appears on the screen press ANGLE button on the remote control repeatedly to switch between different angles gt Playback will go to the selected angle Special DVD Features Playing a Title Press TITLE gt The disc title menu appears on the TV screen Use lt gt A or number buttons 0 9 to select a play option Press OK to confirm Changing the Audio Language For DVD Press AUDIO repeatedly to select different audio languages Changing the Audio Channel For VOD Press AUDIO to select the available audio channels provided by the disc Left Right Mix Stereo Press SUBTITLE repeatedly to select different subtitle languages Special VCD and SVCD Features For VCD with Playback Control PBC feature version 2 0 only Press MENU to toggle between PBC On and PBC Off gt If you select PBC On the disc menu if available will appear on the TV gt Use the number buttons 0 9 to select a play option Press PREV d NEXT PP to go to the previous or next track gt When PREV Md is pressed after the 5 seconds of playback playback will start from the beginning of the current track If you press the button within the 5 seconds playback will start
18. screen Press gt to navigate between the windows and A Y buttons to select files tracks or play mode items Then press OK Please refer to below steps to playback files tracks in the Program View list Select Edit Mode in the toolkit then press OK to start edit mode Select a file track or more files tracks you want in the original view list Select Add To Program in the toolkit then press OK V will disappear from screen It means that the files tracks you have selected already added into the Program View list Select Program View in the toolkit then press OK to open the file track in the Program View list that you already selected in step Press PLAY PAUSE Pil to playback all files tracks in the Program View list LI img imgbak 301 jpg i 0 ED301 ED302 ED602T ED803 EMO1 EM1071 The Toolkit has the following play mode items Filter Audio Photo Video Sets file filters Filter is not applicable to Audio CD Repeat Off Single All Off Resumes normal playback Single Repeats the current track file All Repeats all files on the current folder or all tracks on the disc Mode Normal Random This mode can also be toggled by using RANDOM button Normal Resumes normal playback Random Playbacks track file in random order gt During MP3 CD DA JPEG DivX files playback If Repeat All or Repeat Off and Random are selected all the tracks will be played randomly
19. 1 1 2 0 USE Helpful hint Press lt to go back to previous menu item Press SETUP to exit the menu item 13 Playback from disc Playback Feature Super Video CD COMPACT MSE SUPER VIDEO MP3 Disc DVD is a trademark of DVD Format Logo Licensing Corporation Because of problems and errors that can occur during the creation of DVD and CD software and or the manufacture of DVD and CD discs Toshiba cannot assure that this DVD player will successfully play every disc bearing the DVD and CD logos If you happen to experience any difficulty playing a DVD and or CD disc on this DVD player please contact Toshiba Customer Service This DVD player requires discs recordings to meet certain technical standards in order to achieve optimal playback quality There are many different types of recordable disc formats including CD R containing MP3 files Not all recordable discs will operate or produce optimal playback quality The technical criteria set forth in this owner s manual are meant only as a guide Use of CD RW for MP3 files is not recommended You must obtain any required permission from copyright owners to download or use copyrighted content Toshiba cannot and does not grant such permission Tip MPEG Layer 3 audio coding technology licensed from Fraunhofer IIS and Thomson Supported Formats MP3 tracks The file extensions have to be mp3 ISO format Maximum 8 characters display for folde
20. 1 4 1 8 forward only gt Sound will be muted To return to normal speed press PLAY PAUSE Pil Forward Reverse Searching You can fast forward or fast reverse a disc during playback and select a desired search speed For DVD VCD SVCD CD MP3 During playback press F R F F to select the required speed X2 X8 X30 X100 backward or forward gt Sound will be muted DVD VCD SVCD MP3 or intermittent CD To return to normal speed press PLAY PAUSE Pl Selecting various repeat functions Repeat play mode The repeat play options vary depending on the disc type While playing a disc press REPEAT repeatedly to choose a repeat option For DVD Repeat Chapter currently playing chapter Repeat Title currently playing title Off cancel For Video CD Audio CD Repeat Single currently playing track Repeat All entire disc Off cancel For MP3 JPEG Repeat Single currently playing file Repeat All current folder Off cancel Helpful hint The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs Playback Feature Tip For VCD2 0 SVCD discs repeat playback is not possible if the PBC mode is turned on Repeating a section within a title track You can repeat the playback of a specific segment within a title or track To do this you must mark the start and end of the segment you want While playin
21. 196 to create the new folder If there are other folders in disc or USB it will be smaller than 196 During the converting process do not pull out the USB flash memory The connection may not be available depending on the type of your USB flash drive Playing USB Flash Memory QO 19 You can play or view the data files JPEG DivX and MP3 in the USB flash memory However editing or copying the data file is not possible NY Plug the USB flash memory directly to the USB jack on the front of this unit Press USB on the remote control to call up the DISC USB mode selection menu Use A F to select USB then press OK to access the data in the drive Use A to select a desired file and press OK to start playback lt only supports FAT format FAT 12 16 32 It does not support NTFS The maximum USB flash memory capacity supported is according to FAT32 file system specification It cannot playback files whose file size exceed the FAT 32 file system specification For more playback information see Playing MP3 JPEG Kodak picture CD for details Press STOP W to stop playback Press USB on the remote control then select DISC by using OK button to exit from the menu and switch to disc mode gt You can remove the USB flash memory now Tips The unit can only support up to a maximum of 200 folders and 500 files When connecting USB jack use USB flash memor
22. Displays information on 12 TV screen during playback Point remote control to the sensor on the front panel 14 OPEN CLOSE OON STANDBY 12 14 Open close the disc tray To switch the DVD player to ON or standby mode 15 16 22 INumber Buttons Selects numbered items in a menu T SEARCH 16 Press to enter track chapter title Start playback from a designated numbers or password directly OPEN CLOSE DISF LAY ON ST ANDBY point cD T SETUPT 12 19 Enters or exits the system setup menu 15 10 button Press to enter number greater than 9 Press 10 button repeatedly to select 10 20 30 etc lt gt A V 15 17 18 Cursor buttons for moving to the left right up down To rotate the JPEG picture during playback 15 16 IMENU Enters or exits the disc menu Switches on or off the Playback Control PBC mode for VCD 2 0 SVCD only STEP Play video frame by frame PLAY PAUSE p 14 15 13 OK Starts or pauses playback Acknowledge menu selection STOP 15 Stops play 17 IRETU RN ER A RIN To go back to previous menu T oad 16 18 JTITLE Zo SUBTITLEI 16 nP Car Show title menu To access subtitle language Press to view a page of 9 thumbnail mH ANGLE 16 images during JPEG playback Switch the camera angle during SUBTITLE ANGLE playback 15 F R amp F F e AUDIO 16 Do a forward reverse search RANDOM PR Selects an audio setting DVD or an 14 16 17 PREV amp NEXT audio
23. PREV d is pressed after the 5 seconds of playback playback will start from the beginning of the current chapter track If you press the button within the 5 seconds playback will start from the Helpful hint Some discs cannot be played on this DVD player due to the configuration and characteristics of the disc or due to the condition of recording and authorizing software 14 Playback Feature 15 beginning of the preceding chapter track Press DISPLAY to display the disc information for title chapter track Use Number buttons to enter valid chapter track number directly For the track chapter numbers which are greater than 9 use 10 button Each press increases the number by 10 Then press the second digit of track Chapter number gt The playback skips to the selected chapter track Tip For VCD 2 0 SVCD discs accessing tracks using number buttons is not possible if the PBC mode is turned on Stopping playback During playback press STOP W The DVD player memorises the stopped point Press PLAY PAUSE Pll to resume playback from the location where you stopped playback elf you press STOP M again the DVD player will cancel the resume function Tips Screen saver will start automatically if the disc playback is stopped for about 2 minutes The player will automatically switch to Power Standby mode if you do not press any buttons for about 22 minutes after the disc has stopped playing
24. Program playback During playback press PROG then the OSD will appear as below For VCD Program Track 2 Track 3 Track 4 Track 5 Track 6 For DVD Program Title 1 Title 2 Title 3 Title 4 C2 fo C7 Use the A V and OK button to select your desired title chapter track in the list When you have finished programming press gt to move the cursor to the Play then press the OK button or directly press PLAY PAUSE button to start the program playback Press CLEAR or select Clear to delete one by one from last chosen track title chapter or select Clear All to clear all the programmed tracks titles chapters Press STOP twice to cancel program playback Operations for video playback DVD VCD SVCD Using the disc menu Depending on the disc a menu may appear on the TV screen once you load in the disc To select a playback feature or item eUse lt gt A or number buttons on the remote control then press OK to start playback To access or remove the menu Press MENU on the remote control This function allows you to enlarge the picture on the TV screen and to pan through the enlarged picture During playback press ZOOM repeatedly to display the picture with different scales Use A Y to pan through the enlarged picture Playback will continue Press ZOOM repeatedly to return to the original size Press SLOW during playback to select the required speed 1 2
25. TOSHIBA DVD PLAYER SD2010KE OWNER S MANUAL DIDOLBY dts LUIDOLBY ed DIGITAL Digital Out 2010 Toshiba Corporation Introduction SAFETY PRECAUTIONS This symbol is intended to alert the user of the presence of uninsulated dangerous CAUTION voltage within the product s enclosure that may be of sufficient magnitude to RISK OF ELECTRIC SHOCK constitute a risk of electric shock to people DO NOT OPEN CAUTION VISIBLE LASER RADIATION WHEN OPEN DO NOT STARE INTO BEAM The exclamation point within an equila teral triangle is intended to alert the user RISQUE DE CHOC ELECTRIQUE NE AVIS PAS OUVRIR to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER The symbol for CLASS II Double SERVICING TO QUALIFIED SERVICE PERSONNEL Insulation WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE DO NOT OPEN THE CABINET REFER SERVICING TO QUALIFIED PERSONNEL ONLY CAUTION PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER S MANUAL AND THOSE MARKED ON THE UNIT RETAIN THIS BOOKLET FOR FUTURE REFERENCE CAUTION USE OF ANY CONTROLS ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
26. VD background screen appears Tip There are some progressive scan TVs and High Definition TVs that are not fully compatible with this unit resulting in the unnatural picture when playing back a DVD VIDEO disc in the progressive scan mode In such a case turn off the progressive scan feature on both the DVD player and your TV Setting the language Choose your desired On Screen Display OSD language where available On Screen Display OSD Language The On screen language for the system setup menu will remain as you set it regardless of various disc languages OSD language COA EU E Language a ei Fran ais Deutsch Polski A Video DivX Subtitle m Audio H i ungarian o Audio DVD Menu Portugu s a Rating Bl Misc Press SETUP Press A to select Language Press to highlight OSD language then press gt Press A to select a language and press OK to confirm Subtitle DivX Subtitle Audio and DVD Menu language You can choose your own preferred language or soundtrack from Subtitle DivX Subtitle Audio and DVD Menu languages If the language selected is not available on the disc the disc s default language will be used instead 000 etting Started Playback from disc OSD language English Language Subtitle Auto DivX Subtitle Standard V English French FA Video Audio o Audio DVD Menu German Rating Polish Hungarian Portuguese 2 Misc
27. code of your unit by looking on the rear panel Some discs are compatible with more than one region or all regions Sampling frequency The rate at which sound is measured by a specified interval to turn it into digital audio data The number of samples in one second is defined as the sampling frequency The higher the rate is the better the possible sound quality Title DVD A collection of chapters on a DVD See also chapter Video CD The contents of a Video CD When playing back a Video CD with the PBC function the title menu will appear automatically Track Audio CDs and Video CDs use tracks to divide the contents of a disc The DVD equivalent is called a chapter See also Chapter
28. e played back Should be viewed only by adults due to graphic sexual material violence or language Use A F to select a rating level and press OK to confirm gt Select 8 Adult to disable parental level and allow all discs to play DVDs that are rated higher than the level you selected will not play unless you enter your four digit password Tips This feature will not limit viewing if the disc manufacturer did not code the disc VCD SVCD CD have no level indication so parental control has no effect on these type of discs This also applies to most illegal DVDs Some DVDs are not coded with a rating though the movie rating may be printed on the disc cover The rating level feature does not prohibit play of such discs Changing the Password You need to enter your four digit password to play a prohibited disc or if prompted for a password In Rating press A V to select Set Password then press OK gt You will be prompted to enter your four digit password Enter Password Use the number buttons 0 9 to enter the four digit password then press OK gt When doing this for the first time enter the default password 0000 f you forget your old four digit password enter the default password 0000 Press OK again to enter the new four digit password gt The new four digit password will now take effect Enter New Password Press OK to confirm 22 DVD Menu Options
29. e wall outlet turn on the DVD player and leave it for two or three hours After two or three hours the DVD player will have warmed up and evaporated any moisture Keep the DVD player connected to the wall outlet and moisture condensation will seldom occur Region Codes This DVD player is designed to support the Region Management System Check the regional code number on the disc package If the number does not match the player s region number see table on page 5 the player may be unable to playback the disc Tips lIt may not be possible to play CD R RW DVD R RW or DVDR DL in all cases due to the type of disc or condition of the recording If you are having trouble playing a certain disc remove the disc and try a different one Improperly formatted disc will not play on this DVD Player P Introduction Discs that can be played Region U S A and Canada regions U K Europe regions and Japan Asia Pacific Taiwan Korea Australia New Zealand Latin America Russia and India regions China Calcos Islands Walls and Futuna Islands This item incorporates copy protection technology that is protected by U S patents and other intellectual property rights of Rovi Corporation Reverse engineering and disassembly are prohibited Notes on copyright The unauthorized recording use distribution or revision of television programs videotapes DVDs and other materials is prohibit
30. e which you want to convert MP3 to and then press OK It will take a few seconds to identify the USB device Select a track or more tracks you want to convert in the original view list V will appear in front of the track s for your selection The second item of the toolkit is Select all if no tracks have been selected or Unselect all if you have choose one or more tracks Select Select all in the toolkit then press OK to select all tracks to convert Select Unselect all to clear all the tracks you have chosen and then press OK W will disappear from screen It means that the tracks you have selected already been removed from the converting list Select Speed in the toolkit then press OK to choose the converting speed Select Quality in the toolkit then press OK to select the quality of the converted MP3 Select Create ID3 in the toolkit then press OK to create or not to create ID3 with the converted MP3 It can be selected only if the CD with CD TEXT in it Select Converting start then press OK to start the converting In Convert mode you can use A V gt in remote control to select Contents to return to normal play mode toolkit to select tracks for playback see page 17 You cannot select Contents when Converting start is in progress Speed Normal High Normal Convert the track in a speed of playing it and player will play the track which is being converted while converting
31. ed under the Copyright Laws of the United States and other countries and may subject you to civil and or criminal liability DivX is a registered trademark of DivX Inc and is used under license Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Manufactured under license under U S Patent 5 451 942 amp other U S and worldwide patents issued amp pending DTS and the Symbol are registered trademarks and DTS Digital Out and the DTS logos are trademarks of DTS Inc Product includes software DTS Inc All Rights Reserved EU Conformity Statement This product is marked with CE and complies therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006 95 EC and the EMC Directive 2004 108 EC Responsible for CE marking is TOSHIBA INFORMATION SYSTEMS U K LTD Toshiba Court Weybridge Business Park Addlestone Road Weybridge Surrey KT15 2UL United Kingdom Following information is only for EU member States The use of the symbol indicates that this product may not be treated as household waste By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please c
32. enu appears Language Aspect Ratio View Mode H FA Video 3 TV System Video Out Smart Picture JPEG Interval od Audio Rating El Misc Press A W to select Video then press gt Press A Y to select an item then press to access Example Video Out gt The options for the selected item appears gt If the selection in the menu is greyed out that means the feature is not available or not possible to change at the current state Use A F to select a setting and press OK to confirm Example P Scan gt The setting is selected and setup is completed To exit press SETUP Aspect Ratio The picture shape can be adjusted to fit your TV and the format must be available on the playback disc Otherwise the TV display will not affect the picture during playback In Video press A F to select Aspect Ratio then press gt 4 3 Select this if you have a normal TV A wide screen source display with black bars on the top and bottom will be displayed on the TV screen 16 9 Select this for wide screen TV frame ratio 16 9 Use A F to select a setting and press OK to confirm Use view mode to scale an image that fits to the TV screen s width and height In Video press A W to select View Mode then press gt Helpful hint Press lt to go back to previous menu item Press SETUP to exit the menu item 2 Fill Fill the screen wi
33. for a check and repair Neglecting to do so may cause fire 20 While it is thundering do not touch the connecting cables or the apparatus SOME DOS AND DON TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but like any electrical equipment care must be taken if you are to obtain the best results and safety is to be assured So please read the points below for your own safety They are of a general nature intended to help you with all your electronic consumer products and some points may not apply to the goods you have just purchased DO read the operating instructions before you attempt to use the equipment DO ensure that all electrical connections including the mains plug extension leads and inter connections between the pieces of equipment are properly made and in accordance with the manufacturer s instructions Switch off and withdraw the mains plug before making or changing connections DO consult your dealer if you are ever in doubt about the installation operation or safety of your equipment DO be careful with glass panels or doors on equipment DON T remove any fixed cover as this may expose dangerous voltages DON T obstruct the ventilation openings of the equipment with items such as newspapers tablecloths curtains etc Overheating will cause damage and shorten the life of the equipment DON T allow electrical equipment to be exposed to dripping or splas
34. g a disc press A B at your chosen starting point Press A B again at your chosen end point gt The section will now repeat continuously To exit the sequence press A B Viewing the disc playback Information You can view the disc information Such as current title chapter track number total playing time or remaining time on the disc without interrupting the disc playback During playback press DISPLAY repeatedly on the remote control gt The available disc information appears on the TV screen with the following sequence DVD Video Time Time Title Title 1 1 Chapter Chapter 2 8 Audio Audio 1 1 MD 5 1Ch Eng Subtitle Subtitle Angle Angle 1 4 DVD 00 03 33 01 24 46 DVD DVD DVD DVD 1 8 Eng DVD DVD VCD2 0 VCD Time Time Track Track OR Time Time PBC On 00 03 33 00 05 00 VCD 3 24 VCD PBC OFF VCD PBC ON VCD PBC ON COROSEESS 00EIOSES00 DivX 3 11 DivX Time Time Track Track 1 2 Audio Audio Subtitle Subtitle Off 00 01 33 02 05 00 DivX Divx 1 1 MP3 2 Ch DivX Divx Title Chapter Track Time selection Press T SEARCH then press A F to select Time Title Chapter or Track For VCD PBC OFF Track Time desired time of the current track Disc Time desired time of the disc For DVD Title Chapter Time desired time of the disc Use the number buttons 0 9 to input a valid number
35. hing or objects filled with liquids such as vases to be placed on the equipment DON T place hot objects or naked flame sources such as lighted candles or nightlights on or close to equipment High temperatures can melt plastic and lead to fires DON T use makeshift stands and NEVER fix legs with wood screws to ensure complete safety always fit the manufacturer s approved stand or legs with the fixings provided according to the instructions DON T listen to headphones at high volume as such use can permanently damage your hearing DON T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand by mode Switch off using the switch on the equipment and make sure that your family know how to do this Special arrangements may need to be made for infirm or handicapped people DON T continue to operate the equipment if you are in any doubt about it working normally or if it is damaged in any way switch off withdraw the mains plug and consult your dealer ABOVE ALL NEVER let anyone especially children push anything into holes slots or any other opening in the case this could result in a fatal electrical shock NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry Introduction CAUTION This Digital Video Disc Player employs a Laser System To ensure proper use of this product please read this owner
36. i border for DVD are supported For DVD R and DVD RW multi border only finalized disc can be supported For DVD R and DVD RW multi border both finalized and unfinalized disc cannot be supported Starting disc playback Turn on the TV and select the video input connected to the DVD player Press ON STANDBY to turn on the DVD player Press OPEN CLOSE to open the disc tray Place a disc onto the disc tray with the label facing up then press OPEN CLOSE For double sided discs load the side which you want to play facing up Playback may start automatically If not press PLAY PAUSE Pil gt f a disc menu appears on the TV see page 15 Using the disc menu gt If the parental control was activated for the inserted disc you have to enter your four digit password see page 22 gt For more playback features see pages 14 19 Tips Do not overturn the DVD player while disc loading playing or ejecting Do not close the disc tray manually if the power is switched off Basic playback control Unless otherwise stated all operations described are based on Remote Control use Pausing playback During playback press PLAY PAUSE to pause playback and display a still picture gt Sound will be muted To resume normal playback press PLAY PAUSE again Skipping chapter track Press PREV NEXT PP to go to the previous or next chapter track during playback gt When
37. ications that may be added in the future 24 Troubleshooting WARNING Under no circumstances should you try to repair the DVD player yourself as this will invalidate the warranty Do not open the DVD player as there is a risk of electric shock If a fault occurs first check the points listed below before taking the DVD player for repair If you are unable to remedy a problem by following these guides consult your dealer or TOSHIBA for help Problem Solution No power No picture Distorted picture Picture clipped Completely distorted picture or black white picture with DVD No sound distorted sound No audio at digital output No sound and picture Disc cannot be played Picture freezes momentarily during playback No return to start up screen when disc is removed The player does not respond to the Remote Control Buttons do not work 25 Check if the AC power cord is properly connected Press the 1 0 ON STANDBY on the front of the DVD player to turn on the power Refer to your TV s manual for correct Video In channel selection Change the TV channel until you see the DVD screen Check if the TV is switched on If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly See pages 12 13 for proper progressive scan set up or deactivate the progressive scan feature as follow 1 Press OPEN CLOSE on the DVD P
38. istration code will appear Use the registration code to rent or purchase the movies from Divx VOD Registration service at www divx com vod gt Follow the instructions and download the movie from your computer onto a CD R RW or DVD R RW for playback on this DVD player Tips All the downloaded movies from DivX Registration can only be played back on this DVD player 23 Time search feature is available during DivX movie playback DivX Deregistration DivX deregistration code is used for deregistering the DVD player from the DivX VOD service through the DivX website For more information visit website www divx com vod About how to obtain DivX deregistration code and DivX registration code pls see below The DivX Registration should be selectable and the DivX Deregistration is grayed out before the DVD player is registered You can select DivX Registration and press OK on remote control to get the 10 character DivX VOD Registration Code and register the DVD player at http www divx com vod The DivX Registration is grayed out and the DivX Deregistration is selectable when the DVD player is registered for the first time You can select DivX Deregistration to get the 8 character deregistration code then deregister the DVD player at http www divx com vod Both DivX Registration and DivX Deregistration are selectable when the DVD player is deregistered
39. layer 2 When the disc tray is opened press number button 1 on the remote control for a few seconds Sometimes a small amount of picture distortion may appear depending on the disc being played back This is not a malfunction May be caused by View Mode Setting see page 20 Set to Original for normal viewing Connect DVD Player directly to the TV Make sure the disc is compatible with the DVD player Ensure that the DVD Player s setting is set to match that of the disc and your TV Adjust the volume Check that the speakers are connected correctly Check the digital connections Check if your receiver can decode MPEG 2 or DTS and if not please make sure the digital output is set to PCM Check if the audio format of the selected audio language matches your receiver capabilities Check that the cable is connected to the correct device See Connecting to television The DVD R RW must be finalized and in Video mode format Ensure the disc label is facing up Check if the disc is defective by trying another disc Wrong region code Check the disc for fingerprint scratches and clean with a soft cloth wiping from centre to edge Reset the unit by switching the player off then on again Aim the Remote Control directly at the sensor on the front of the player Reduce the distance to the player Replace the batteries in Remote Control Re insert the batteries with their polarities signs as
40. mpressing files You can copy MP3 files on CD RW R or DVD R RW discs from a computer and play back the files on this unit Multichannel DVD is specified to have each sound track constitute one sound field Multi channel refers to a structure of sound tracks having three or more channels Parental control A function of the DVD to limit playback of the disc by the age of the users according to the limitation level in each country The limitation varies from disc to disc when it is activated playback will be prohibited if the software s level is higher than the user set level PBC Video CD only Playback Control This function enables you to play back interactive software using a menu screen See also Title Progressive scan It displays all the horizontal lines of a picture at one time as a signal frame This system can convert the interlaced video from DVD into progressive format for connection to a progressive display It dramatically increases the vertical resolution PCM Pulse Code Modulation PCM is a format that converts audio into digital data It is mainly used for Audio CDs and DAT This unit can play back sounds as realistic as possible by converting even com pressed Dolby Digital and MPEG audio to PCM Region code Regions associate discs and players with particular areas of the world This unit will only play back discs that have compatible region codes You can find the region
41. ntal control gt The options for the selected item appears gt If the selection in the menu is greyed out that means the feature is not available or not possible to change at the current state Use A F to select a setting and press OK to confirm Example 8 Adult gt The setting is selected and setup is completed To exit press SETUP Rating Level settings Depending on the DVD you may be asked to change the parental level while playing the disc The rating levels are from 1 to 8 and are country dependent You can prohibit the playing of certain Helpful hint Press lt to go back to previous menu item Press SETUP to exit the menu item discs that are not suitable for your children or have certain discs played with alternative scenes In Rating press A W to select Parental control then press gt Use the number buttons to enter the four digit password then press OK See Changing the Password on this page Press OK again to list the parental level 1 Kid Safe Suitable for children 2 G General Audience recommended as acceptable for viewers of all ages 3 PG Parental Guidance suggested 4 PG 13 Unsuitable for children under 13 5 PG R Parental Guidance Recommended 6 R Restricted under 17 requires accompanying parent or adult guardian 7 NC 17 No one under 17 admitted 8 Adult DVD softwares of any grades adult general children can b
42. on and quality Before you start Ensure that you have connected this DVD player to a progressive scan TV using the Y PB PR connection see page 7 Ensure that you have completed the basic installation and set up Turn on your TV and select the video input connected to the DVD player refer to your TV user manual Press ON STANDBY on the remote control to turn on the DVD player gt The blue DVD background screen will appear on the TV Press SETUP Press A F to select Video then press gt Aspect Ratio View Mode TV System Tale Ure 1 FA Video i _ Video Out Component Smart Picture RGB n Audio a Rating B Misc Press A F to select Video Out then press P Select P Scan then press OK to confirm gt The menu will appear on the TV ve Lw Press to highlight Yes and press OK to confirm gt The reconfirmation menu will appear on the TV Helpful hint Press lt to go back to previous menu item Press SETUP to exit the menu item 12 G 600 EZE m Press to highlight Yes and press OK to confirm gt The setup is now completed and you can start enjoying the high quality picture To deactivate Progressive Scan manually Wait for 15 seconds for the auto recovery OR Press OPEN CLOSE on the DVD player to open the disc tray Press number button 1 on the remote control for a few seconds gt The D
43. onnected from the power outlet Product Overview Front and Rear panels z ON STANDBY Disc tray Turns the player on or switches it to standby Place a disc here mode 4 OPEN CLOSE gt Il PLAY PAUSE Opens or closes the disc tray Starts or pauses playback IR Sensor Points the remote control towards this sensor aSTOP Stops playback Display Shows information about the current status of the 7e oan DVD Player Input for USB flash memory MAINS Connects to a standard AC outlet SCART OUT Connects to SCART input of a TV AUDIO OUT Left Right Connects to Audio input of a TV an amplifier Y PB PR Component Video Out receiver or stereo system Connects to Y Ps PR input of a TV COAXIAL Digital audio out Connects to coaxial Audio input of a digital audio VIDEO Out CVBS equipment Connects to CVBS Video input of a TV DVD display The indicators vary depending on the kinds of disc you play DVD video disc VIDEO CD Audio CD During playback During playback During playback Example Example Example Multifunctional indicator indicates The elapsed time The elapsed time The elapsed time operating status or messages etc will be displayed will be displayed will be displayed eal may also APREA i oer OFF open Lead situation 10 Product Overview Remote Control See the page in for details 16 JDISPLAY REMOTE SIGNAL EMITTER
44. ontact your local city office your household waste disposal service or the shop where you purchased the product Lx Following information is only valid EU member States Pb Hg Cd Disposal of batteries and or accumulators The crossed out wheeled dust bin symbol indicates that batteries and or accumulators must be collected and disposed of separately from household waste If the battery or accumulator contains more than the specified values of lead Pb mercury Hg and or cadmium Cd defined in the Battery Directive 2006 66 EC then the chemical symbols for lead Pb mercury Hg and or cadmium Cd will appear below the crossed out wheeled dust bin symbol By participating in separate collection of batteries you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health For more detailed information about the collection and recycling programmes available in your country please contact your local city office or the shop where you purchased the product In conformity with the EEE Regulation Introduction Table of Contents Introduction SAFETY PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS Setup Cleaning discs Moisture Condensation Region Codes Table of Contents 1 wo OS a aS O1 Connections Connecting to television Connecting to a Stereo System Connecting to a Digital AV Receiver Connecting the power co
45. orrect Video In channel See page 12 Finding your viewing channel General Operation Load a disc gt The disc reading time may exceed 30 seconds due to the complexity of the directory file configuration gt The data disc menu and ID3 MP3 information including at least title singer and album appears on the TV screen img imgbak 301 jpg z 0 ED301 ED302 ED602T ED803 EMO1 EM1071 Press A F to select the folder and press OK to open the folder Press A to select a track file Press OK to confirm Tips If you highlight on a jpeg file a preview will appear During MP3 playback the LED will display the elapsed time of the current playback During JPEG playback the LED will display the file number Playback Selection During playback you can Press PREV i lt NEXT BI to select the previous next track file in the current folder Press PLAY PAUSE Pll repeatedly to pause resume playback For MP3 Within the first 5 seconds press PREV I lt to go back to the previous track After the first 5 seconds of playback press PREV l lt to go back to the beginning of current track During playback press d gt gt to access fast forward or fast reverse with the required speed X2 X8 X30 X100 Play modes for DivX MP3 Audio CD JPEG You are able to modify the play modes through the toolkit which appears on the right of below picture on the
46. peed the better the sound quality However higher bit rates use more space on a disc Chapter Just as a book is split up into several chapters a title on a DVD disc is usually divided into chapters See also Title Digital audio An indirect representation of sound using numbers During recording the sound is measured at discrete intervals 44 100 times a second for CD audio by an analogue to digital converter generating a stream of numbers On playback a digital to analogue converter generates an analogue signal based on these numbers See also Sampling frequency and Analogue audio Disc menu A screen display prepared for allowing of selection of images sound subtitle multi angles etc recorded on the DVD 27 Divx DivX is a codec compression de compression that can compress images to a very small amount of data Dolby Digital Asystem developed by Dolby Laboratories that compresses digital sound It works with stereo 2ch or multi channel audio DTS Digital Theater System DTS is a Multi channel surround sound system but it is different from Dolby Digital DTS format was devel oped by Digital Theater Systems Inc JPEG Joint Photographic Experts Group JPEG is a method of compressing still image files You can copy JPEG files on CD RW R or DVD R RW discs from a computer and play back the files on this unit MP3 MPEG Audio Layer 3 MP3 is a method of co
47. r Scart connection P Scan Select this when you connect your DVD player to your TV which has component video inputs that supports progressive scan Use A F to select a setting and press OK to con firm f the progressive scan feature is activated but the connected TV does not support progressive scan press number button 1 with the disc tray opened to set the video output of the DVD player to Component Smart Picture This DVD player provides four predefined sets of picture color settings In Video press A F to select Smart Picture then press gt Standard Select this for a preset standard picture setting 20 DVD Menu Options 21 Vivid Select this to make the picture brighter Cool Select this to make the picture softer Personal Select this to personalize your picture color by adjusting the brightness contrast tint and color saturation Use A F to select a setting and press OK to confirm If you select Personal then proceed to steps 0 0 gt The setup menu appears Contrast D Tint Color Close Press A F to highlight one of the following options Brightness Increase the value to brighten the picture or vice versa Choose zero 0 for average setting Contrast 4 Increase the value to sharpen the picture or vice versa Choose zero 0 to balance the contrast Tint Increase the value to darken the picture or vice 5
48. r name Maximum 15 characters display for file name Supported sampling frequencies amp corresponding bit rates 32kHz 64 320 kbps 44 1kHz 48kHz 80 320 kbps JPEG Pictures The file extensions have to be JPG or JPEG JPEG ISO format Maximum of 5760x3840 resolution can be supported Maximum file size 5 Mbytes Maximum of 500 files and 200 folders are supported When the number of files or folders reaches the maximum limit the rest of the files or folders cannot be displayed lIt can only display DCF standard still pictures or JPEG pictures such as TIFF DivX The file extensions have to be DIVX XVID or AVI DivX 3 11 4 x 5 x and 6 0 Q pel accurate motion compensation Global Motion Compensation GMC playback DivX Certified to play DivX video including premium content ABOUT DIVX VIDEO SOO DivX is a digital video format created by DivX Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play DivX Video on Demand VOD content To generate the registration code locate the DivX VOD section in the device setup menu Go to vod divx com with this code to complete the registra tion process and learn more about DivX VOD Tips Maximum 100 sessions for CD and 10 mult
49. r to the corresponding AUDIO IN jacks on the stereo system cable not supplied 2 Connections Connecting to a Digital AV Receiver AV Receiver es Lo f ma f mn O fo esea ug dP db dE db db db db db op dha ef eh ofp dh db gp R Dore Our Y Pr Receiver has a PCM Dolby Digital or MPEG decoder Select one of the video connections CVBS VIDEO IN SCART IN or COMPONENT VIDEO IN depending on the options available on your TV Connect the COAXIAL jack of the DVD player to the corresponding Digital Audio In jack on your Receiver cable not supplied Set the DVD Player s Digital Output to PCM or All depending on the capabilities of your Receiver see page 21 Digital Output Tip If the audio format of the Digital Output does not match the capabilities of your receiver the receiver will produce a strong distorted sound or no sound at all Helpful hint Before making or changing any connections make sure that all the devices are disconnected from the power outlet Connections Connecting the power cord A A fo lt de db de db db db db db db de db db db db db After everything is connected properly plug in the AC power cord to the power outlet Never make or change any connections with the power switched on Helpful hint Before making or changing any connections make sure that all the devices are disc
50. rd O N Product Overview Front and Rear panels Remote Control Getting Started O Inserting Batteries 12 Finding your viewing channel 12 Setting up Progressive Scan feature 12 13 Setting the language 13 Playback from Disc Playable discs 13 14 Playback Feature Starting disc playback 14 Basic playback control 14 15 Operations for video playback DVD VCD SVCD 15 Selecting various repeat functions 15 16 Viewing the disc playback Information 16 Special DVD Features 16 Special VCD and SVCD Features 16 17 Playing a Divx Disc 17 Playing MP3 JPEG Kodak picture CD 17 18 MP3 Converter 18 19 Playing USB Flash Memory 19 DVD Menu Options Using the Language setup menu 19 20 Using the Video setup menu 20 21 Using the Audio setup menu 21 22 Using the Rating setup menu 22 Using the Misc Miscellaneous setup menu 29 Tray Lock 23 Others eee Specifications 24 Troubleshooting 25 26 Glossary 27 ON Connections Using Component Video Jacks Y Ps Pr Connecting to television IMPORTANT You only need to make one video connection from the following options depending on the capabilities of your television Connect the DVD player directly to the television Using SCART socket IMPORTANT The progressive scan video quality is only possible when using Y Ps PR and a progressive scan TV is required Use the component video cables green blue red to connect
51. th decoded image Original Display image as its original size Height Fit Fit the screen height with image height Width Fit Fit the screen width with image width Auto Fit Automatically display the decoded image on screen at a suitable size Pan Scan Automatically display decoded image on full screen without distortion Use A F to select a setting and press OK to confirm Tip Depending on the type of disc you may not be able to view the mode as selected TV System The video standard of the DVD player output can be selected from NTSC PAL or Multi NTSC Select if your TV system is NTSC PAL Select if your TV system is PAL Multi The DVD video player automatically identifies PAL or NTSC video system of a disc Connect a multisystem TV PAL NTSC compatible to view a picture A playback picture may be distorted when detected a signal change between PAL and NTSC on the disc For the case of Progressive mode your multisystem TV must be able to support 525p and 625p With the disc tray opened you can also press number button 3 to switch between NTSC and PAL Video Out The video output of the DVD player can be selected as Component RGB or P Scan In Video press A F to select Video Out then press gt Component Select this for composite video or component video connection RGB Select this fo
52. the DVD player s Y PB PR jacks to the corresponding Component video input jacks or labelled as Y Pb Pr on the TV cable not supplied to the corresponding scart input socket on the TV OUT L R jacks of the DVD player to the cable not supplied corresponding AUDIO IN jacks on the TV cable not If your DVD player will not be connected to a Stereo supplied System or AV Receiver to hear better sound scart is Proceed to page 12 for detailed Progressive Scan set enough for both audio and video connections Up Using Composite Video Jack CVBS S VIDEO AUDIO IN VIDEO IN Use the composite video cable yellow to connect the DVD player s VIDEO CVBS jack to the video input jack or labelled as A V in Video In or Composite on the TV cable not supplied To hear the sound of this DVD player through your TV use the audio cables white red to connect AUDIO OUT L R jacks of the DVD player to corresponding AUDIO IN jacks on the TV cable not supplied Helpful hint Before making or changing any connections make sure that all the devices are disconnected from the power outlet Connecting to a Stereo System Stereo System with Left Right Audio In Jacks Select one of the video connections CVBS VIDEO IN SCART IN or COMPONENT VIDEO IN depending on the options available on your TV Use the audio cables white red to connect AUDIO OUT L R jacks of the DVD Playe
53. u is greyed out that means the feature is not available or not possible to change at the current state Use A V to select a setting and press OK to confirm Example On gt The setting is selected and setup is completed To exit press SETUP Digital Output Select this if you connect to a multichannel decoder receiver In Audio press A F to select Digital Output then press P Off To deactivate the digital audio output For example if you use the AUDIO OUT jacks to connect to a TV or stereo system PCM Select this if the connected device is not capable of decoding multichannel audio The DVD player will convert the Dolby Digital signal to PCM Pulse Code Modulation All Select this if the connected device has a built in multichannel decoder that supports one of the multichannel audio format Dolby Digital DTS Use A F to select a setting and press OK to confirm Tip When playing MPEG MP3 and set Digital Output to All the player will output PCM signals Night Mode This mode optimizes playback of sound at low volume High volume outputs will be softened and low volume outputs are brought upward to an audible level In Audio press A to select Night Mode then press gt Off Turns off night mode feature Select this to enjoy the surround sound with its full dynamic range On Select this to set low volume output This feature is only available
54. ure JPEG During playback press ZOOM repeatedly to display the picture with different scales Use A V 4 P to view the zoomed picture Rotate picture JPEG During playback press A V 4 P to rotate the picture on the TV screen A Y flip the picture vertically by 180 lt 4 rotate the picture anti clockwise by 90 gt rotate the picture clockwise by 90 Tip It may not be possible to play certain MP3 JPEG disc due to the configuration and characteristics of the disc or condition of the recording MP3 Converter MP3 converter helps you to convert the tracks in Audio CD to MP3 into an USB device When playing a CD disc make sure there is an USB device properly connected to the player E 5 Convert Ss ONV H 4 SACD CD G DTS CDs and Copy protected CDs cannot be converted to MP3 Playback Feature Some copy controlled CDs cannot be converted to MP3 Use A W 41 P in remote control to select Convert button on the screen then press OK The play state changes to STOP and there will be toolkit for MP3 converter which appears on the right of below picture on the screen You are able to convert CDA to MP3 through the toolkit Press P to navigate between the windows and A V buttons to select tracks or convert mode items then press OK Select Destination in the toolkit then press OK Then there will appear a list of devices select a USB devic
55. xposed to dripping or splashing Do not place any sources of danger on the apparatus e g liquid filled objects lighted candles Cleaning discs re eet Some problems occur because the disc inside the system is dirty frozen picture sound disruptions picture distortions To avoid these problems discs should be cleaned on a regular basis To clean a disc use a micro fibre cleaning cloth and wipe the disc from the center to the edge in a straight line Do not touch the playback side of the disc Introduction CAUTION Do not use solvents such as benzene thinner commercially available cleaners or anti static sprays intended for analog discs Since the optical unit laser of the DVD system operates at a higher power than regular DVD or CD players cleaning CDs intended for DVD or CD players may damage the optical unit laser Therefore refrain from using a cleaning CD Moisture Condensation Moisture condensation damages the DVD player Please read the following carefully Moisture condensation occurs for example when you pour a cold drink into a glass on a warm day Drops of water form on the outside of the glass In the same way moisture may condense on the optical pick up lens inside this unit one of the most crucial internal parts of the DVD player If you use the DVD player in such a situation it may damage discs and internal parts Remove the disc connect the power cord of the DVD player to th
56. y only Copy protected files are not playable The connection may not be available depending on the type of your USB flash memory Helpful hint Press lt to go back to previous menu item Press SETUP to exit the menu item This DVD Player setup is carried out via the TV enabling you to customise the DVD player to suit your particular requirement Using the Language setup menu Press SETUP on the remote control gt The system setup menu appears Re erated OSD language Subtitle FA Video DivX Subtitle Audio DVD Menu ad Audio B Rating B Misc Press A W to select Language then press P Press A Y to select an item then press to access Example OSD language gt The options for the selected item appears gt f the selection in the menu is greyed out that means the feature is not available or not possible to change at the current state Use A F to select a setting and press OK to confirm Example English gt The setting is selected and setup is completed To exit press SETUP OSD Language This menu contains various language options for the language displayed on the screen Subtitle Audio DVD Menu These menus contain various language options for Subtitle Audio and DVD Menu which may be recorded on the DVD Tips Some DVD video discs may be set to display subtitles in a different language other than your selection A prior subtitle language
Download Pdf Manuals
Related Search