THB Bury LT 9100 User's Manual
Contents
1. 9 Making a call When the Twin Phone is switched on e g with inserted SIM card you can make a call by entering the phone number using the number keys and then establish a connection by pressing the call answering key Or simply press the call answering key once when the screen saver is shown in order to open the list of the last Dialled numbers If you now press the call answering key once a connection is established to phone the last dialled number When the phone is used for the first time the Call registers are empty In all BT profiles you also have the option to establish a connection oy ung oe 14 15 O ME D 11 12 The first steps via the menu to a phone whose number is stored in the internal pho ne book of the Twin Phone In the SIM card profile or SAP profile you can also establish a con nection to the phone whose number is stored in the external phone book In the external phone book only entries stored on your SIM card can be used Or simply enable the voice dial function by pressing and holding the call answering key You are then prompted to say a record only possible if a record was previously stored in the internal phone book 10 Answering a call If your phone shows an incoming call a symbolised telephone receiver icon will be displayed on the Twin Phone When the SIM card was inser ted or if in SAP profile only the ring tone set for the Twin Phone will sound the same ap2. You can control the system and enter data via the illuminated steering wheel remote control hereinafter referred to as SWRC The SWRC is powered by an integrated 3V lithium battery e g CR2 If the battery housed in part A of the SWRC is low after being used for a long time simply replace it with a new suitable battery 7 1 Fitting the steering wheel remote control First disconnect the parts A and B Loosen the clamping device of part B as illustrated in the picture Now place the clamping device on the steering wheel and re attach it to part B Reassemble the two parts The SWRC is now fitted Device description and installation Pairing the steering wheel remote control The Twin Phone is normally paired to the supplied SWRC when it leaves the factory This means that both devices each detect the identifier si gnal of the other device If this is not the case pair the devices as fol lows with enabled ignition On the SWRC press the ESC and the information key at the same time keys 3 and 7 see picture 8 Then place the Twin Phone in the hang up cup of your HFCK The display will now show BURY TECHNOLO GIES i e the initialising process is now running Once the initialisation has been successfully completed the screen saver is displayed Now release keys 3 and 7 of the SWRC and press the shift key to open the main menu o
3. and the use of the voice dial function depend on the respective user s voice The function will only work properly if the voice tag and the voice dial were recorded and spoken by the same person Sometimes the voice tag recording is made at a too low or too high volume depending on the background noise within the cabin Repeat the voice tag recording according to the instructions Note If a voice dial function is available with your mobile ple ase note that the mobile phone voice dial cannot be applied to the Twin Phone This is not possible as the voice tags are stored in the mobile memory yet not on the SIM card 14 2 External phone book This second menu of the phone book which can be opened with the OK key allows you to access the data stored on your SIM card The external phone book will be active as soon as a SIM card is inserted into the Twin Phone card slot or the SAP profile is activated Note gt The mobile phone book cannot be accessed In order to store entries on the SIM card select your SIM card as the storing location for phone book contacts in the settings menu of your mobile The Twin Phone is otherwise not able to access the entries gt In HF profile the external phone book is not active If the external phone book can be accessed and if you select this using the OK key up to 500 contacts stored on the SIM card will be displayed in alphabetical order The number of the entries stored on your SIM card d
4. ce E a yee ue WE SEH Ge E e SE SE SE EE A a SC EE EE F e arena a a a S A e ereonmeenaactrmancans a o A yg a cee Notes 43 44 Version 10 2006 25 0971 0 02 191006 Subject to alterations and errors expected Cf amp V BURY TECHNOLOGIES Bury GmbH amp Co KG Robert Koch Str 1 7 D 32584 L hne Hotline Tel 49 0 180 584 24 68 Hotline Fax 49 0 180 584 23 29 E Mail infoline bury com www bury com
5. electronic equipment used electrical appliances must no longer be disposed of together with normal waste since 24th March 2006 If you own a used appliance you are required to leave it at the desi gnated collection or municipal recycling stations Electrical waste will be accepted free of charge at these stations 18 3 Information about GNU General Public License GNU GPL Please note that the operating system of the navigation system you use contains free software the codes of which are however under licence Hereunder information is provided on the use reproduction distribution and processing of this software Furthermore a note on the exclusion of liability is included Due to legal circumstances the following textes are in English On the Internet sites mentioned in this user manual you have the possibility to request the re spective source codes or to download them yourself http www gnu org licenses gpl html GNU GENERAL PUBLIC LICENSE Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 59 Temple Place Suite 330 Boston MA 02111 1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software
6. file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found lt one line to give the program s name and a brief idea of what it does gt Copyright C lt year gt lt name of author gt This program is free software you can redistribute it and or modify it under the terms of the GNU General Public Li cense as published by the Free Software Foundation either version 2 of the License or at your option any later version This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public License along with this program if not write to the Free Software Foundation Inc 59 Temple Place Suite 330 Boston MA 02111 1307 USA Also add information on how to contact you by electronic and paper mail If the program is interactive make it output a short notice like this when it starts in an interactive mode Gnomovision version 69 Copyright C year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY for details type show w This is free software and you are welcome to redistribute it under certain conditions type show C for details The hypothetical commands show w and show c should show the appro
7. HERWISE STATED IN WRITING THE COPYRIGHT HOL DERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AG IS WITHOUT WARRANTY OF ANY KIND EITHER EX PRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PRO GRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 12 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMA GES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program and you want it to be of the greatest possible use to the public the best way to achie ve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to the program It is safest to attach them to the start of each source
8. N is entered three times consecu tively You will require your PUK code Personal Unblocking Key to unlock the SIM card this code is also supplied with the SIM card If an incorrect PUK code is entered ten times consecutively your SIM card will be completely blocked The display will then read SIM card locked In this case please contact your network operator for assistance in providing either a copy of your current SIM card or a new card In the SIM card profile the SIM card symbol is displayed in the top left corner of the screen saver In the top middle a small house like icon is displayed as symbol for your home network If a pyramid is displayed instead of the house symbol the telephone is operating in a different available network Furthermore the antenna symbol is displayed in the top right corner of the screen saver screen when in SIM card profile The antenna sym bol including the bars for reception quality is displayed even if no SIM card is inserted in the Twin Phone The antenna symbol indicates an unknown available network to be used in emergencies Note You can call the emergency number e g 112 in Germa ny or 999 in Great Britain directly from the Twin Phone without inserting a SIM card The easiest way to do this is to use the Twin Phone telematic keys see chapter Setup System settings Telematic keys When a SIM card is inserted the following items are enabled in the Twin Phone main menu Pho
9. PIN will be displayed unless this is enabled on your mobile 13 3 Paired devices The Paired devices submenu will show whether and with which mo bile phone your Twin Phone has been paired In the bottom of the dis play you will see a 12 digit combination consisting of digits and letters for each selected mobile This is the respective Bluetooth address of the paired mobile It is used for distinguishing purposes in the event that two mobiles of the same make with identical device names are paired with the Twin Phone 20 Ui Menu navigation Establish current connection If you confirm one of the displayed mobile names with the OK key you have two options you may now establish a current connection to the paired phone or delete the pairing If you want to establish a connection to the paired mobile select the required phone name and then confirm this with the OK key If the Twin Phone is unable to establish a connection make sure that the Bluetooth interface of your mobile was enabled and that your mobile s name is displayed In the Twin Phone either the HF profile or the SAP profile must be enabled Delete pairing In order to delete a pairing select the respective mobile which is to be disconnected from the Twin Phone Press the OK key to confirm the Delete pairing prompt The concerned mobile name is then no longer listed in the Paired de vices submenu If only one pairing has previously been realised this submenu
10. TWIN PHONE FOR UNI System 8 aie FLEE 3 AWARD a share bor innovation Ease of Use Ji LT 9100 Table of Contents Introductory mniormaton moon Des 1 General 2 2 Notes on safety 2 3 Included in delivery 3 Device description and installation Oaa 4 4 Description of the Twin Phone 4 5 Installation of the Twin Phone 6 6 Switching off and removing the phone 6 7 Steering wheel remote control 7 7 1 Fitting the steering wheel remote control 7 7 2 Key functions 8 7 3 Creating contacts and SMS 9 The first steps mnie LI 8 First use 11 9 Making a call 11 10 Answering a call 12 Menu navigation 13 11 Main menu 13 12 Bluetooth profiles 13 12 1 SIM card profile 14 12 2 SAP profile 15 12 3 Hands free profile 16 12 4 Auto profile 16 13 Bluetooth connections 17 13 1 Establishing a BT connection in HF profile 17 13 2 Establishing a BT connection in SAP profile 19 13 3 Paired devices 19 13 4 Disconnecting BT connections 20 13 5 BT setup 21 14 Phone book 22 14 1 Internal phone book 22 14 2 External phone book 25 15 Call registers 26 15 1 Dialled numbers 26 15 2 Received calls 27 15 3 Missed calls 28 15 4 Clear call registers 28 16 SMS 29 16 1 Inbox 29 16 2 Message options 29 16 3 Writing messages 30 16 4 Message settings 31 17 Settings 32 Additional information 36 18 Service and regulations 36 18 1 Service 36 18 2 Regulations 36 18 3 Information about GNU General Public License GNU GPL 37 19 Inde
11. ad Difference between records too big the records 1 and 2 are too different from each other to be identified as identical voice tags by the device In this case repeat the recording process as described above Avoid any background noise while recor ding Cy 23 24 Menu navigation If the display reads Record is similar to existing one distinguish the new voice tag from the existing one by for example also stating the first and last name of the contact Once the voice tag has been recorded successfully you can listen to the voice tag using the function of the Voice dial submenu For this confirm Play tag In the main menu you can set the volume of the recorded voice tag namely by going to Setup Audio Volume Voice tag volume Note The voice tag will only be recorded if you have stored the corresponding entry in the internal phone book Voice tags cannot be stored in the external phone book You can use the voice dial function by means of the stored voice tag If the screen saver is displayed you can voice dial by pressing and holding the call answering key for approx 3 seconds until the display reads Tell voice tag Say the required name into the microphone of your HFCK from the UNI System 8 The phone is now connecting When using the voice dial function and the device displays the message Unrecognised voice tag or Error recognising voice tag repeat recording Note Please note that the stored voice tag
12. case this License incorporates the limitation as if written in the body of this License 9 The Free Software Foundation may publish revised and or new versions of the General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies a version number of this License which 39 40 Additional information applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this License you may choose any version ever published by the Free Software Foundation 10 If you wish to incorporate parts of the Program into other free programs whose distribution conditions are diffe rent write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OT
13. clear the list terminate the process by pressing the call termination key The SMS menu is activated when a SIM card is inserted in the Twin Phone card slot or when the SAP profile is active In the SMS menu three submenus are available Inbox Write SMS SMS settings Note For your and other motorists safety we do recommend not to write and or read an SMS while driving 16 1 Inbox When a message is received this will be indicated by an icon symboli sing a closed envelope which is located in the upper part of the screen saver An SMS tone will additionally sound to indicate that you have received an SMS If you want to read the received message open the main menu with the shift key select the SMS Inbox menu with the OK key and open the unread message Unread SMS are indicated in the Inbox menu by an icon on the left hand side symbolising a closed envelope Read SMS are symbolised by an open envelope Select the Inbox submenu to see a list of received SMS If there is an entry for the sender in the internal or external phone book the name of the sender will be displayed If you want to read an SMS select it with the OK If the received text is too large to be displayed in full you can use key 8 to scroll down to the end of the SMS 16 2 Message options When you open the inbox and confirm this with OK five options for this SMS will be displayed Using the first option Dial you can call the sen der of the sel
14. ctive phone number if the phone of the respective person called also transmits their mobile number The registers will only list names if cor responding entries were stored in the internal or external phone book gt In HF profile the external phone book is not active The data stored there cannot be listed in the call registers if the HF profile is active In these registers you can call any person whose telephone number and name are displayed by pressing the call answering key The regis ters will show Unknown number if the called person s mobile does not transmit the respective number In this case it is not possible to return a call by pressing the call answering key You can clear individual registers by first opening them and then pres sing the shift key once The display will then read for example Recei ved calls menu Clear list 15 1 Dialled numbers In the Dialled numbers submenu you can retrieve information on persons you have called using the Twin Phone The names of the called persons which are listed in the Twin Phone phone book will be dis played directly otherwise the dialled number date and time of the call will be listed in the register Scroll to the entry of the dialled number now you can either make a call by pressing the call answering key or end a call by pressing the call termination key You can also confirm the name in the Dialled num bers register with the OK key and make a call by pre
15. e whose number was allocated to this key The left key is marked with a white i and can be used as speed dial key e g for an info number The right key shows a white spanner and could for example be used for speed dialling a service number The Default submenu does not comprise numbers for the speed dial function of the two telematic keys Change allocated numbers If you open the telematic keys submenu with the OK key you can choose from two speed dial options Edit info number and Edit ser vice number After having confirmed your selection with the OK key you can enter the required number Press the call termination key to confirm your selection Emergency calls If you press and hold the two telematic keys simultaneously for ap prox 3 seconds a connection to the emergency services 112 in Ger many is established Use this number only in case of emergency the emergency telephone number is stored in Default Default If you want to reset your Twin Phone to Default open the Default submenu If you want to terminate this process press the call termina tion key Upon confirmation with the OK key System restart will be displayed The device will automatically switch off and restart In doing so the original settings are restored for certain menu items The Twin Phone and the SWRC must be re paired after each restart Version Info This contains the manufacturer s address as well as the hardware HW and software SW versi
16. e are paired with the Twin Phone If the Twin Phone display does not show the intended mobile name repeat the search process Select Search again with the OK key d After confirming the detected and displayed mobile name using the OK key the devices are paired Simultaneously a 4 digit BT code will be displayed in the bottom of the display Enter this BT code in your mobi le A different 4 digit code will be provided every time two devices have been newly paired in HF profile e Before entering the BT code in your mobile you may need to confirm on your mobile that you accept your phone to be paired with the Twin Phone In your mobile s menu you can select whether you want to be requested to confirm acceptance each time before a BT connection to an external device is established You have approx 30 seconds to enter the code If you do not enter the code within this time limit the process will be aborted Initiate another connection process by selecting the detected mobile s name on the Twin Phone with the OK key If the devices were not paired after repeated attempts delete all pre vious pairings with BT devices listed in the menu of your mobile also the pairing with the Twin Phone and repeat the pairing process f If pairing is successful the menu BT connections Paired devices will now include the name of your mobile while the Twin Phone will al ways attempt to establish a connection to the paired phone In order to ensure
17. e name by pressing the call answering key Then enter the phone number for this contact Confirm the entered data again by pressing the call answering key Search stored contacts In the internal or external phone book you can also search for stored contacts If you open the internal phone book in the phone book menu you will be provided with a list of all stored contacts in al phabetical order By pressing the shift key once the submenu with the two functions Add contact and Search contact will open If you confirm Search contact with the OK key Enter name to search will be displayed while the cursor is flashing Enter the first letter of the required contact and press the call answe ring key to confirm All corresponding names will immediately be dis played This list starts with the contact which best matches your search criteria You can choose the relevant contact using the scroll keys Select the required contact so that it is highlighted in black and then press OK once to access further information If you then press the call answering key a telephone connection to the phone of this particular party will be established Phone book contact options You can also open a submenu with five functions for this particular phone book contact by pressing the OK key or the shift key before the information on this contact is displayed name and phone number This procedure is identical to that of the external phone book The first o
18. ected SMS 29 30 Menu navigation With the second option Add number to phone book you can save the sender s number either in the internal or in the external phone book The third option is Reply If you confirm this with the OK key the dis play will prompt Message text You can now enter a text using the number keys Press the OK key to send the written reply In the bottom of the display it will read Dial or choose phone book When you confirm this prompt with the call answering key a reply will be sent to the displayed number If you want to send your reply to a different person open the phone book by pressing the shift key and then select first either the internal or external phone book and then the recipient If your SMS has not been sent the display will for a few moments read Message sending error Check whether sufficient reception is provi ded and that you entered the correct number Then try again Please note that it is not possible to automatically reply if the sender s number was not transmitted With the fourth option Forward you can forward any selected recei ved SMS to a chosen number Confirm this option with the OK key The SMS to be forwarded will be displayed below the Message text hea der If you wish to do so you may also edit the message text Please note that the number keys must be activated for this See icon in the bottom left corner of the display If the icon shows arrows pr
19. epends on the network operator If a network operator offers SIM cards with a capacity of 1000 entries the Twin Phone will only show the first 500 contacts of the external phone book In the following you will find a summarised listing of frequently used functions as the external phone book is analogue to the internal phone book Use the call answering key to establish a connection to the phone of the contact saved in the list You can open contacts by pressing the OK key The corresponding submenu with four options for this phone book ent ry will be displayed after pressing the shift key Voice dial for entries stored in the external phone book is not available Choose phone book External phone book 25 26 Choose register Dialled numbers Menu navigation 15 Call registers This function is active if a SIM card has been inserted in the Twin Pho ne card slot or if either the SAP or Hands free profile has been acti vated Here four submenus are available Dialled numbers Received calls Missed calls and Clear call registers The individual call re gisters of the Twin Phone are empty when the phone is being used for the first time or if the registers were cleared They will only display in formation for connections which were established while the Twin Pho ne was switched on Note gt The Twin Phone is not able to access the mobile phone call registers gt The registers will only list the respe
20. ess the shift key once in order to activate the number keys If you want to enter a number from the internal or external phone book open the phone book with the shift key and select the respective contact With the fifth option Delete SMS you can delete a selected received SMS 16 3 Writing messages Open this menu with the OK key to write an SMS The text can be en tered with the number keys of the SWRC Press the call answering key to send the SMS The Recipient number will now be shown in the top of the display while the entry field is empty In the bottom the display will read Dial or choose phone book You can now enter the required number with the number keys to which you want to send your SMS If you want to enter a number from the internal or external phone book you can open the two phone books with the shift key and select a contact 16 4 Message settings In this menu the following four submenus are available Service cen tre Delivery report Validity time and SMS language which can be selected with scroll keys 2 and 8 and confirmed with the OK key Service centre With this option you can display the Service centre number of your network operator You can quit this menu by pressing the call answe ring key Note gt No SMS can be sent without the correct service centre number Delete the individual digits of the number from right to left and or from below upward by pressing the call termination key Your n
21. et the date displayed in the first line Use the scroll keys 2 and 8 to select the respective data in ascending or descending order for the day month and year Press and hold the scroll key to scroll fas ter With the scroll key 6 you can move the cursor in each line from left to right and then to the next line In the second line you can select the Date format You have two options yyyy mm dd for year month day and dd mm yyyy for day month year Make your selection with the scroll keys 2 and 8 Press the scroll key 6 for moving to the next line You can then set the Time please follow the steps described in the Date and time section In the fourth line you can select the time format 12 or 24 hours Confirm all settings with the OK key to complete Turn off time Here you can choose whether and after what time the Twin Phone is to switch off automatically when you have turned off the engine of your vehicle and leave the Twin Phone in the hang up cup of your hands free car kit Note Please note that the vehicle s battery will be continuously discharged as long as the Twin Phone is switched on Press the call termination key to confirm your selection Telematic keys The two black keys of the Twin Phone just below the display are the telematic keys These are speed dial keys to which you can allocate one phone number each If you press and hold one of these keys a connection is automatically established to the phon
22. etwork operator will provide you with the correct number Delivery report Here you can select whether you want to receive a delivery report on the SMS sent from your mobile The delivery report acts as a confirma tion that the message was received by the recipient s phone Validity time Here you can choose how long the network is supposed to try to send your SMS The device will try to send your SMS for a maximum of one week If this validity time period expires and your SMS was not sent during this period you will receive a delivery report with the message Undelivered Press the call termination key to quit the menu SMS language In this menu one of the following languages can be selected GSM Deutsch English Francais Polski The Twin Phone uses two types of SMS coding With the first you can write SMS with a text consisting of up to 160 characters This is used for the selectable SMS languages German English and GSM 31 Menu navigation The second coding is used amongst others for Latin text with particu lar characters such as French accents The message text is limited to 70 characters as more than one character is used when coding these characters This SMS coding type is used for the French and Polish SMS languages Note gt The language is set to GSM as default when the phone leaves the factory Special characters will not be sent If you want to use language specific special characters select the Germa
23. f the Twin Phone If this is not possible the device and the SWRC have not been paired correctly Please repeat the pairing procedure as described above 7 2 Key functions Call answering key CF For answering incoming calls In standby mode press key once to access the submenu last Dialled numbers You can activate the voice dial function by pressing and holding this key In the menu confirm new entries created using the number keys Call termination key Reject incoming calls or end a call In the menu press key to confirm after selecting a function by highligh ting the respective item with OK key Shift key a Accessing the main menu while the screen saver is activated In the individual submenus access to options such as Clear list in the Dialled numbers submenu Phonebook entries or SMS shift between scroll keys and number keys In standby mode enabling and disabling the silent function by holding this key OK key Confirming a selection if such was not entered via the number keys Scroll MEA In the menu scroll function from above downwards and from left to right Number keys Enter numbers and write SMS Volume control In standby mode press this key once for setting the Ring tone volu me twice for setting the Voice tag volume three times for setting the Talk volume Turn the control upwards and or downwards to turn up and or down the volume When calling press key once for setting the Ta
24. gain the Local BT name LOOKnTALK as listed in Default will be displayed The cursor is active while the local name is displayed and you can now independent ly change the Local BT name Once entered press the call answering key in order to set the new name You can quit this menu function by pressing the call answering key if you choose to maintain the Local BT name given in Default Gaz 21 22 Choose phone oo Caine Internal phone oo Menu navigation 14 Phone book When you open the phone book in the main menu by pressing OK you may choose between two phone books The internal phone book of the Twin Phone holds up to 500 individually saved entries of which 45 can be used with the voice dial function The external pho ne book can also contain up to 500 contacts stored on your SIM card Unfortunately it is not possible to copy and export data from the mobi le phone s phone book to the Twin Phone phone books 14 1 Internal phone book Add new contact To add a new contact or to search for a saved contact select the in ternal phone book If the device is being used for the first time or if no contacts have yet been stored the internal phone books directo ry is empty Press the shift key to open the Phone book menu You must confirm Add contact for each new entry For better conveni ence the upper part of the display will show Enter name Now follow the steps as described in chapter 7 3 Save th
25. grants you permis sion to modify or distribute the Program or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Program or any work based on the Program you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Program or works based on it 6 Each time you redistribute the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy distribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not respon sible for enforcing compliance by third parties to this License 7 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a conse quence you may not distribute the Program at all For example if a patent license would not permit royalty free re distribution of the Program by all those who receive copies directly
26. hone In this case pairing or the current BT connection to the mobile phone is not required The Twin Phone with inserted SIM card can be turned into an independent car phone when used in conjunction with a UNI System 8 hands free car kit You may also use a TWIN card in your Twin Phone The TWIN card is linked to your SIM card therefore the telephone number is identical Calls or SMS will be transmitted by the respective active card Conse quently it is no longer necessary to swap the SIM card If you have selected the SIM card profile you may be required to enter your PIN The PIN is your Personal Identification Number and is normally provided with the SIM card If you have set your mobile to request the PIN every time the phone is switched on you must also enter this PIN in the Twin Phone In all other cases you will not be re quested to enter your PIN After you have entered the 4 to 8 digit PIN confirm this using the call answering key If you have accidentally entered a wrong digit you may delete this by pressing the call termination key then correct it by re entering the digit using the number keys and confirm using the call answering key If the correct PIN is entered the screen saver will be displayed In case that an incorrect PIN is entered an error message will be displayed and you will be prompted to re enter the PIN Note Please note that your PIN will be locked for security re asons if an incorrect PI
27. ion Each licen see is addressed as you Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running the Program is not restricted and the output from the Program is covered only if its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on what the Program does 1 You may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provi ded that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along with the Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Program and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you distribute or publish that in whole or in part contains
28. is free for all its users This General Public License applies to most of the Free Software Foundation s soft ware and to any other program whose authors commit to using it Some other Free Software Foundation software is covered by the GNU Library General Public License instead You can apply it to your programs too hen we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive sour ce code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the software or if you modify it For example if you distribute copies of such a program whether gratis or for a fee you must give the recipients all the rights that you have You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights We protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distribute and or modify the software Also for each author s protecti
29. le to select the auto profile if for example a user with an SAP compatible mobile and another with an HFP compatible mobile use the Twin Phone in turn The pre selected auto profile will automati cally enable the suitable profile after the phone is switched on If only one person uses the Twin Phone they choose their preferred profile SIM card SAP profile or HF profile which will be enabled every time the phone is switched on unless the profile has been chan ged In the future this will allow a connection to be automatically es tablished between the Twin Phone and the mobile once the devices have been paired 13 Bluetooth connections You can access the menu BT connections in the main menu by pres sing the OK key This submenu is required for pairing or connecting your mobile with and or to the Twin Phone Here pairing means to establish the very first connection through identification The BT con nections menu comprises four submenus Establish BT connection Paired devices Disconnect BT and Bluetooth setup If you use your SIM card with the Twin Phone you will not need the functions available in the BT connections menu This function will not be available when the SIM card is inserted Note For security reasons it is not possible to pair your mo bile phone with and or establish a new connection to the Twin Phone via your mobile s menu This is the only way to ensure that no other user within the same reception zo
30. lk volume twice for setting the Ring tone volume three times for setting the Voice tag volume 7 3 Creating contacts and SMS You can save entries in the internal and external phone book as well as Write SMS using the number keys of the SWRC The keys 2 to 9 also display letters which can be entered by pressing the required key The first letter from left to right can be entered by pressing the respective key once the second one by quickly pressing the key twice and so on In the left bottom corner of the display the icon for the number keys of the SWRC is displayed when creating phone book entries or writing an SMS i e the number keys are enabled and you can enter the required letters The call termination key can be used for deleting an entered letter and or text The respective last letter to the left of the cursor will then be deleted If you want to delete or insert a letter located elsewhere press the shift key in order to enable the scroll keys the icon in the left bottom corner will now show the arrows indicating the four possible directions instead of the number keys You can now position the cursor anywhere in the entered name and or the SMS text using the scroll Message text Hello Mr Smithi T ll be arriving at 10am Message text Hello Mr Smithi T ll be arriving at 10am 10 keys 2 4 6 and 8 If you want to enter another letter after having shifted the cursor press the shift key in order
31. n French or Polish SMS language The Setup menu comprises five items Display Audio Language Phone settings and System settings Display Choose option Active brightness to modify the display s active bright ness using the scroll keys 4 and 6 The black bars indicate the level of brightness Confirm your selection with the OK key If you do not want to change the set level press the call termination key With the option Idle brightness you can adjust the level of active brightness when the phone is not being used With the third option you can set the display Contrast Audio Open the Audio submenu by pressing the OK key Here you can adjust the Volumes and Tones Volume Here you can adjust the Ring tone volume Talk volume and the Voice tag volume Follow the steps described in the Display section Ring tone Here you can select the ring tone With the OK key the circle to the left of the selected ring tone name is ticked and the ring tone will sound Confirm your selection with the call termination key or scroll down to another ring tone Key tone Here three options are available Tone off Standard and DTMF Al ways confirm with the call termination key SMS Tone With this option you can choose from five different SMS tones Confirm your selection with the call termination key Language Here you can select the language in which the menu is displayed Avai lable languages are German English French and Poli
32. n Phone is a high quality connecting unit for a Bury hands free car kit a base unit from the UNI System 8 The large high contrast display shows all menu and telephone functions depending on mobile model You can also insert a SIM card in the Twin Phone in order to use it as an independent phone only in side the vehicle The Twin Phone also allows you to connect a mobile phone via the Bluetooth interface For this you can use different profiles transmission protocols HFP and SAP If you connect the Twin Phone to a mobile phone using the SAP profile SIM Access profile the inte grated GSM module will access the SIM card in your mobile This will render the mobile inactive i e it Device description and installation 5 Installation of the Twin Phone Installation Overview e g with UNI CarTalk Place the Twin Phone in the hang up cup of the Bury hands free car kit in order to enable power supply to reach the device If such supply is continuous the device will immediately switch on If not the system will be activated upon ignition and or starting the engine As a default the Twin Phone screensaver will be displayed which also shows the time and date In order to ensure that these functions are continuously provided in case of an interruption to the power supply e g when removing the Twin Phone from the hang up cup the Twin Phone uses an integrated re chargeable battery When the car is swit ched off Twin Pho
33. ne e g a passenger in certain traffic conditions traffic jam can connect their mobile to your Twin Phone 13 1 Establishing a BT connection in HF profile The submenu Establish BT connection indicates whether a BT con nection to a mobile was established The BT connections menu will only be enabled if you have activated the HF profile or SAP profile via the Twin Phone menu BT profiles Pairing Use this submenu for pairing the phone with another BT device This means that both devices will detect the respective identifier signal of its respective counterpart to automatically establish a connection in the future a Select Establish BT connection in order to pair the Twin Phone with your mobile Bluetooth connections J gt E Bt Jh Gaz Establish BT connection IM 17 18 Menu navigation b For this the Bluetooth interface of your mobile must be enabled and your mobile s name displayed The display will show Establish BT connection Searching c Press the OK key to start Searching Le Search BT devices If the search process is successful the name of the detected phone is dis played Note If the mobile name is hidden the Twin Phone will not be able to establish a connection You can either keep the de fault mobile name or choose a name It is recommended to allocate individual mobile names as it will otherwise be difficult to distinguish between them if for example two mobiles of the same mak
34. ne book Call registers Messages BT profiles and Setup Since connection to the mobile is not required the menu item BT connections is not available 12 2 SAP profile The SIM access profile allows the integrated GSM module to exter nally access the SIM card in your mobile This means that the Twin Phone is able to retrieve the SIM data via the SAP profile Your mobi le must support the SAP SIM Access profile technology if you want to use this option In this profile your mobile is put in on standby to reduce the electrical discharge of the mobile battery to a minimum while the connection is maintained If you have selected the SAP profile you may need to enter your PIN If you have set your mobile to request the PIN every time the phone is switched on you must also enter this PIN in the Twin Phone In case of incoming calls only the ring tone of the Twin Phone will sound Missed calls as well as the name of your network operator will now be displayed on the Twin Phone The same applies to receiving and sending an SMS No entries can be made in the mobile as long as the activated SAP connection is maintained Due to the transmission of SIM card data it may take up to 60 seconds before the SMS submenu can be accessed Ire GSM OP 14 15 2006 05 04 15 16 Menu navigation 12 3 Hands free profile Yet another operating option is the hands free profile HF profile in the BT profiles menu Note Plea
35. ne remains in hang up cup the power supply will be maintained time and date are still displayed It is not necessary to remove the battery as it re charges automatically once the Twin Phone is supplied with onboard power In case of an interruption to the power supply removal from the hang up cup the battery will ensure the time and date are displayed for a period of approx 3 to 4 weeks In case of longer periods of interrupti on the time and date must be reset 6 Switching off and removing the phone If you leave your car for a short while you can set the Turn off time function Setup System settings Turn off time so that the Twin Phone will automatically switch off after a certain period of time See the chapter on the respective menu for detailed information If you leave your car for longer periods or over night you should in general never leave the Twin Phone in the vehicle This is the best protection against theft In order to do so press the button on the right side looking at the phone from above of your hands free car kit s hang up cup to release the lock If the phone is exposed to direct sunlight while the car is parked the inside of the cabin may heat to temperatures exceeding 70 C For this reason remove the Twin Phone from the hang up cup and vehicle as you may otherwise encounter disruptions for a short while once the Twin Phone has been switched back on 7 Steering wheel remote control
36. nforma tion through our telephone hotline if you are planning to install the device in a vehicle with 24V onboard system lorries Position volume Install the hang up cup of the base unit of the Bury hands free car kit in the vehicle so that it does not obstruct your view and that the com ponents are not located in passenger impact areas within the vehicle cabin or in airbag deployment zones Please adjust the device s volume so that you can still hear outside noises Use while driving Only use the Twin Phone in situations where the traffic allows such use and you do not injure hinder or disturb other motorists or put them at risk Intended use Damages caused by improper use of the connecting unit or the hands free car kit may result in loss of warranty For this reason please read the user s guide carefully The device must always be protected from moisture extreme temperatures or shock Faults Do not switch the device on if you have noticed and or suspect faults Please visit a Bury specialist dealer or contact the Bury hotline Impro per repairs may put you at risk Therefore only qualified personnel must inspect the device 3 Included in delivery The following components are included in your package 1 Twin Phone 2 Steering wheel remote control 4 Device description and installation 5 4 Description of the Twin Phone will switch to standby mode in order to reduce power consumption All available f
37. on and ours we want to make certain that everyone understands that there is no warranty for this free software If the software is modified by someone else and passed on we want its recipients to know that what they have is not the original so that any problems intro duced by others will not reflect on the original authors reputations Finally any free program is threatened constant ly by software patents We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses in effect making the program proprietary To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all The precise terms and conditions for copying distribution and modification follow GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License The Program below refers to any such program or work and a work based on the Program means either the Program or any derivative work under copyright law that is to say a work containing the Program or a portion of it either verbatim or with modifications and or translated 37 38 Additional information into another language Hereinafter translation is included without limitation in the term modificat
38. on codes of the Twin Phone for possible inqui ries with the manufacturer Press the call termination key to quit this submenu 35 36 Additional information 18 Service and regulations 18 1 Service Please contact our service team if you have any questions in this matter Bury GmbH amp Co KG Robert Koch Str 1 7 D 32584 Lohne Hotline 49 0 180 584 24 68 Fax 49 0 180 584 23 29 0 12 Min from Deutsche Telekom AG landlines E mail infoline bury com In case of complaints please return the product directly to our service desk Bury GmbH amp Co KG Im Hause DPD Depot 103 Robinienweg D 03222 L bbenau Phone 49 0 5732 9706 170 431 Fax 49 0 5732 9706 470 Suggestions and feedback are always welcomed 18 2 Regulations Notes on battery disposal In some countries you are required by law to dispose of used rechargeable batteries at recycling stations according to the guidelines Do not dispose of these batteries in nor mal waste Please inquire where you can dispose of normal and rechargeable batteries Depending on the recycling station normal and rechargeable batteries containing ha zardous substances must be disposed of separately Batteries which contain hazardous substances are marked with chemical symbols Cd for cadmium Hg for mercury Li for lithium Pb for lead Notes on disposal of electrical equipment With the implementation of the directive on electrical and
39. or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribu tion system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 8 If the distribution and or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such
40. or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties under the terms of this License c If the modified program normally reads commands interactively when run you must cause it when started running for such interactive use in the most ordinary way to print or display an announcement including an appropriate copy right notice and a notice that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally print such an announcement your work based on the Program is not required to print an announcement These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written enti
41. plies to SMS In the HF profile the ring tone of both the Twin Phone and the mobile phone will sound in case of an in coming call If there is an entry for the respective caller in the internal or external phone book the saved name will be displayed in HF profile no entry will be displayed if stored in the external phone book Answer the call by pressing the call answering key press the call termi nation key to end or reject a call The number of missed calls will be displayed in the top right corner Details on the missed calls are shown in the main menu Call registers Missed calls The same applies to received SMS These will be indicated by a small icon in the form of a closed envelope To read the message select the main menu SMS and then Inbox Menu navigation In order to open the main menu when the screen saver is active always press the SWRC shift key In the main menu the display will show six menu items Phone book Call registers SMS BT connections BT profiles Setup which you can access using the SWRC scroll keys 2 4 6 and 8 In order to quit a menu press either the call answering key the call termination key or the OK key depending on the submenu structure Please note that not every menu in every profile may be active Please refer to the chapter BT profile for more details 12 Bluetooth profiles In the BT profile menu s submenu you can choose from four opera ting profiles which represen
42. priate parts of the General Public License Of course the commands you use may be called something other than show w and show c they could even be mouse clicks or menu items whatever suits your program You should also get your employer if you work as a pro grammer or your school if any to sign a copyright disclaimer for the program if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the program Gnomovision which makes passes at compi lers written by James Hacker lt signature of Ty Coon gt 1 April 1989 Ty Coon President of Vice This General Public License does not permit incorporating your program into proprietary programs If your program is a subroutine library you may consider it more useful to permit linking proprietary applications with the library If this is what you want to do use the GNU Library General Public License instead of this License 41 42 Antenna GSM e SE 5 EE SECH e SE SEET aa GE E SES aa AS AA EH SS EE SE GEET EE GE ES Ge ee a GEET SE SS GE EE 535 HFprofle 1617 SC 7 a A acaba le EE SS EE EE 153735 SE eent Ss SE EE Ss EE A GEET BEE SE SS F ke eee Ee EE a Sina co e Go GE GET E er GET KEEN a Ge EE 1203235 Spr ie ee ee E ul 16 la Soins ee EE a EE Service number edit 35 GE E ce A S ene Graces SE E e ee i no eee EE a rab ace SE 7 o ea ees er SE deg E GE d S RC
43. ption in the submenu of a phone book contact is the Choose function Once this function is confirmed with OK a connection is esta blished The second function Delete allows you to delete the stored contact Upon confirming this option once with the OK key the prompt Are you sure you want to delete contact will be displayed If you want to abort the deletion process press either the ESC key key 3 or the call termination key You can also confirm the prompt by pressing the OK key in order to delete the contact With the third function Edit name you can correct the data for any selected contact Please refer to chapter 7 3 for the respective key functions The fourth function Edit number allows you to modify the saved pho ne number for this contact With the fifth function Voice dial you can add a voice tag for the se lected entry Open the Store tag submenu to record the tag The de vice is ready to record when Record 1 is flashing on the display Simultaneously you will hear a short beep which indicates that the recording process will commence shortly Say the name for this contact in a normal voice into the microphone of your HFCK Wait a few moments for Record 2 to flash on the display A short beep again indicates that the recording process will start shortly Re peat the message of the voice tag you want to record The voice tag has been recorded successfully if the display shows Tag stored If the display should re
44. r SIM card activa tion You may also have to enter your PIN If no SIM card was inserted the display will read SIM card missing for a moment until the screen saver is activated Press the shift key in order to access the main menu The screen saver comprises the following information in the top left corner the icon for the SIM card is shown when Default is set re gardless whether a SIM card was inserted or not In the top right corner the symbol for the antenna is displayed with two to three hori zontal bars showing the quality of reception In the middle of the dis play the time and date is displayed The display will remain illuminated for approx 60 seconds After this time the light will switch off if you do not use the phone and the pho ne will automatically switch to standby mode By default the device is set so that users are able to use the phone immediately for calls once the SIM card is inserted into the Twin Phone This means that the SIM card BT profile is already activated Please refer to the chapter BT profile for information on the operating profile of SIM card as well as the SAP HFP and Auto profiles In order to be able to make calls when in other profiles select the re quired profile in the BT profile submenu Then select the item BT connections to pair your mobile phone with the Twin Phone from the re Please refer to the chapters following the section The first steps for more detailed information
45. r a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the source code for all modules it contains plus any associated interface defi nition files plus the scripts used to control compilation and installation of the executable However as a special ex ception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code 4 You may not copy modify sublicense or distribute the Program except as expressly provided under this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 5 You are not required to accept this License since you have not signed it However nothing else
46. rely by you rather the intent is to exercise the right to con trol the distribution of derivative or collective works based on the Program In addition mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may copy and distribute the Program or a work based on it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or b Accompany it with a written offer valid for at least three years to give any third party for a charge no more than your cost of physically performing source distribution a complete machine readable copy of the corresponding source code to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software inter change or c Accompany it with the information you received as to the offer to distribute corresponding source code This alter native is allowed only for noncommercial distribution and only if you received the program in object code or executab le form with such an offer in accord with Subsection b above The source code fo
47. se note that with the selection of the HF profile using the BT technology will increase the battery discharge rate of your mobile and therefore reduce the number of operating hours In the HF profile the connection is established via the GSM network of your mobile The name of your network operator will however only be displayed on the mobile Incoming calls are displayed on the Twin Phone The mobile phone ring tones and the Twin Phone will also sound The same applies to inco ming SMS Apart from the SMS function all other main menu functions are availab le when the HF profile is selected When using the phone book you can only access the internal phone book The external phone book function is not available The HF profile also provides the option to disconnect any connection between the Twin Phone and mobile via the menu of your mobile pho ne 12 4 Auto profile In the auto profile the Twin Phone independently selects a profile The Twin Phone will search for options to establish a connection in the following order first it will check whether a SIM card has been inserted in the integrated card slot Then it will search for an option to establish a connection using the SAP technology Finally it will check whether it is possible to establish a connection in the HF profile If a SIM card is inserted in the Twin Phone the auto profile will auto matically open the SIM card profile and will stop searching It is advisab
48. sh Confirm your selection with the call termination key Phone settings Select Phone settings with the OK key Three submenus are availab le Operator selection Auto answer and Send my caller ID Operator selection The operator selection can be set to Automatic and Manual Auto matic means that the network which is provided at your location is selected automatically If you have selected Manual the device will start to search for a network Then Choose network will be displayed It lists the network available at your location Your Home network is ticked You can choose the network provided by roaming partners at any time Networks for which no roaming agreement exists are mar ked with a cross These cannot be chosen Quit this menu by pressing the call termination key Auto answer In this submenu you can choose whether the Twin Phone is to auto matically answer a call and if yes after how many seconds Press the call termination key to confirm your selection Send my caller ID You can choose whether you want to transmit your phone number Yes or not No Press the call termination key to confirm your selection Select language English O Deutsch O Francais D Polski 33 34 Sy Stem settings CR aa el a Date and time Menu navigation System settings Five options are available Date and time Turn off time Telematic keys Default and Version Info Date and time Here you can s
49. ssing the call ans wering key If you first press the OK and then the shift key for a contact you can open the corresponding submenu for this contact In this menu three functions are available Dial Add number to phone book and De lete number If you confirm the Dial function with the OK key a connection will au tomatically be established to the phone whose number you have di alled You may disconnect by pressing the call termination key The Add number to phone book function can also be accessed by pressing the OK key The display will then read Choose phone book while you can select either the internal or the external phone book Then enter a name via the SWRC if the person whose number you have dialled has not yet been entered in the phone book and then confirm this with the call answering key The display will then read Enter number If the number is not display ed automatically enter this using the number keys and confirm with the call answering key You can select the Delete number function by pressing the OK key If deletion was unsuccessful the display will read Number deleting er ror In this case repeat the above steps If you do not want to delete the number you can return to the submenu for the respective contact by pressing the call termination key 15 2 Received calls The Received calls submenu lists calls with date and time data which you received with the Twin Phone and not with the mobile Press
50. t different ways of establishing a connec tion to your mobile phone You can access the submenu by pressing the OK key Then the SIM card SAP Hands free and Auto profiles are displayed Find the required operating mode using the scroll keys 2 and 8 and then select it by pressing the OK key Confirm the selected profile by pres sing the call termination key The enabled operating profile will then be displayed in the top left corner on the screen saver The last active profile for example the symbol for the SAP profile will flash in the top left corner of the display after the phone was switched on If you do not change the SAP profile the Twin Phone will each time it is restarted automatically attempt to establish a connection to the mobile phone it last communicated with If you wish to change the profile press the shift key open the menu BT profiles choose the required profile and confirm with the call termina tion key When a new BT profile is selected no automatic connection between the Twin Phone and the mobile phone will be established This must be established via the menu BT connections You may skip to this chapter now if you want to read the descriptions of the individual BT profiles at a later time Menu Oe ES tej al TY Phone book Choose profile ms AR Hands Free D Auto 13 14 Menu navigation 12 1 SIM card profile Choose this profile if you want to use a SIM card with the Twin P
51. the call answering key if you want to call the selected contact You can quit this list by pressing the call termination key If you select one of the contacts listed in the Received calls register with the OK key information on this particular call will be displayed If you then press the shift key three options are available Dial Add number to phone and Delete number You can list these with the OK key or quit them by pressing the call termination key Please refer to the descripti on of the Dialled numbers submenu for details 27 28 Menu navigation 15 3 Missed calls The Missed calls submenu lists entries for the calls you missed while the Twin Phone was switched on If you confirm one of the entries in the register with the OK key infor mation on the missed call will be displayed Please refer to the descrip tion of the Dialled numbers submenu for details 15 4 Clear call registers Here you can simultaneously clear all three registers Dialled num bers Received calls and Missed calls by pressing the OK key If you do not want to clear these registers press the call termination key instead of the OK key If you only want to clear a particular register open the respective re gister in the Call registers menu with the OK key press the shift key and select Clear list with the OK key Start the deletion process by confirming the Are you sure you want to clear list prompt with the OK key If you do not want to
52. this the previously enabled profile must not be changed If the Twin Phone is unable to establish a connection to your mobile the icon of the selected profile will continue to flash on the screen saver until you have manually chosen a mobile name in the Paired devices submenu to establish a current connection to the mentioned mobile Current connection If you want to establish a connection to a previously paired mobile select Paired devices 13 3 in the BT connections main menu Note gt The phone can be paired with up to ten different mobile phones All paired mobile phones are entered by name in the Paired devices submenu gt A current connection can only be established for one mo bile at a time 13 2 Establishing a BT connection in SAP profile If you have enabled the SAP profile in the Twin Phone BT profiles menu the subsequent pairing process is almost identically The only difference when using the Bluetooth SAP profile a 16 digit BT code is provided This must be entered in the mobile to allow pairing For each pairing process in SAP profile a new 16 digit code is generated which must in turn be entered into the mobile The two devices will then be paired After successful pairing you may need to accept that the Twin Phone externally uses the SIM card data of your mobile If applicable the prompt Enter PIN code will be displayed after a completed pairing process in SAP profile No prompt requesting you to enter the
53. to enable the number keys again The icon in the left bottom corner will now show the number keys At the bottom of the display centre you can see whether capital let ters ABC or lower case Abc and or abc is enabled If Abc is display ed the first word of each sentence will begin with a capital letter The other letters and words will automatically be displayed in lower case If you only want to use capital letters press the hash key once or press this key twice for lower case In the right bottom corner and above the line the number of characters already entered is displayed and below the line how many characters you may still type in When entering names in the internal or exter nal phone book you may enter up to 50 characters When writing an SMS you may use a maximum of 160 characters Space characters can be entered by pressing the 0 key If you press the O key repeatedly 2 to 17 times you can enter one of the following cha racters in the order given 0 2 lt gt Dots can be entered by pressing the 1 key You can also enter the fol lowing punctuation marks characters in the order given by pressing this key repeatedly 1 _ For entering the special characters amp xx 81 i press the star key once and or 2 to 14 times repeatedly The first steps When the device is switched on the illuminated display will first show BURY TECHNOLOGIES and then read Waiting fo
54. unctions can be used via the Twin Phone until you disable external SIM access The HF profile hands free profile provides a second connection opti on Here connections are established via your mobile s GSM network The mobile phone can be used as usual The SIM card slot The SIM card slot inside the Twin Phone is the component in which the SIM card is inserted Through this the Twin Phone can read the data stored on your SIM card e g phonebook entries Display You can insert the SIM card into the back of the Twin Phone In order to do so remove the device from the hang up cup 1 Open the sliding element on the back of the Twin Phone in a downward movement as indicated by the arrow 2 Open the black flap The flap will flip open by pressing the small vertical rectangular button marked with PUSH OPEN 3 Now you can insert a SIM and or a TWIN card into the inside of the flap Please make sure that the topside of the SIM card with the memory chip is facing upwards when inserting it in the flap It must be on the visible side The SIM card edge Telematic key service number for with the bevelled corner must face upwards speed dialling 4 Close the flap Press the Push mark on the flap The flap will Snap and close 5 Push the sliding element back until it locks The local SIM card is now ready for use Place the device back in the hang up cup Telematic key info number for speed dialling The Twin Phone The Twi
55. will be empty after deleting this paired device 13 4 Disconnecting BT connections If there is a current connection in HF or SAP profile to a mobile pho ne you can open this submenu by pressing the OK key The prompt Disconnect BT Are you sure you want to disconnect BT will then be displayed Press OK to confirm Press the call termination key twice to return to the main menu if you want to maintain the BT con nection If you want to disconnect the BT connection in SAP profile repeat the above steps After disconnecting your mobile will be active again no longer in sleep mode and can be used immediately On the Twin Phone screen saver the prompt Deregister will be displayed just above the indicated time The display will then show No phone connected You have several options to disconnect an active connection The easi est way to do this is to interrupt the power supply by removing the Twin Phone from the hang up cup You may also disconnect via the menu BT connections Disconnect BT In HF profile you can also disconnect via the menu of your mobile Please note that any active connection will be interrupted as soon as you and therefore your phone leave the transmission range of the Twin Phone Radio transmission will still be maintained in a radius of up to 10 metres between the Twin Phone and the mobile 13 5 BT setup The Bluetooth setup submenu includes the Local BT name func tion If you press the OK key once a
56. x 42 Introductory information Dear customer You have purchased a Bury connecting unit and therefore chosen a product of high quality as well as absolute ease of use Bury s purchase production and service are subject to strict quality management accor ding to DIN EN ISO 9001 The LT 9100 connecting unit hereinafter referred to as Twin Phone corresponds to the CE and el safety stan dards Please read the user s guide carefully in order to familiarise yourself with the connecting unit and therefore enjoy using it for a long time Please also read all notes and retain for reference in your vehicle If you have further questions on installation and use please contact your specialist dealer They will be happy to give proper advice and forward your experience and suggestions to the Bury team You may also contact our hotline Please find all telephone and fax numbers under the Service section Have a pleasant journey Your Bury team 2 Notes on safety Installation who and where You can easily insert the Twin Phone in the hang up cup of a Bury hands free car kit base unit from the UNI System 8 at any time The hands free car kit however should always be installed by a specialist dealer Power supply This device to be used in connection with a Bury hands free car kit has been designed for use in vehicles with an onboard supply system of 12 Volts cars Always contact your Bury specialist dealer or seek i
Download Pdf Manuals
Related Search