Home

Technics SU-R1 Operating Instructions

image

Contents

1. Standby on switch Press to switch the unit from on to standby mode or vice versa In standby mode the unit is still consuming a small amount of power e The remote control do not operate when the power indicator is off Select the input source HOME Display HOME menu A V lt amp OK Selection OK MENU Enter menu gt 21 DIRECT Turn on off Direct mode gt 20 LAPC Measure the characteristics of the amplifier and correct its output gt 12 MUTE Mute the sound of the headphones or the SE R1 gt gt 13 gt INPUT lt Select the input source VOL Adjust the volume of the headphones or the SE R1 gt 13 e t is not possible to adjust the volume of devices connected to the analog or digital audio output terminals Numeric buttons etc e To select a 2 digit number Example 16 210 1 6 e To select a 4 digit number Example 1234 210 210 210 gt 1 gt 2 gt 3 gt 4 e CLEAR Clear the entered value SETUP Enter setup menu gt 14 20 21 22 23 DIMMER Adjust the brightness of the display etc gt 13 INFO View content information Press this button to display the track artist and album names file type sampling frequency and other information RETURN Return to the previous display RE MASTER Turn on off Re master 20 Basic playback control b
2. During the Labor warranty period there will be no charge for labor During the Parts warranty period there will be no charge for parts This Limited Warranty excludes both parts and labor for non rechargeable batteries antennas and cosmetic parts cabinet This warranty only applies to products purchased and serviced in the United States This warranty is extended only to the original purchaser of a new product which was not sold as is Mail In Service Online Repair Request Online Repair Request To submit a new repair request and for quick repair status visit our Web Site at www panasonic com support When shipping the unit carefully pack include all supplied accessories listed in the Owner s Manual and send it prepaid adequately insured and packed well in a carton box When shipping Lithium lon batteries please visit our Web Site at www panasonic com BatteryHandling as Panasonic is committed to providing the most up to date information Include a letter detailing the complaint a return address and provide a daytime phone number where you can be reached A valid registered receipt is required under the Limited Warranty IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT PROOF OF PURCHASE INDICATING DATE OF PURCHASE AMOUNT PAID AND PLACE OF PURCHASE CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE Limite
3. FIXED Optical digital audio cable not supplied AES EBU OUT Device that supports AES EBU output player etc COAXIAL OUT OPTICAL OUT Device that supports coaxial digital output player etc We recommend using cables with a length of 3 m 9 9 ft or less Device that supports optical digital output player etc L The digital audio input of this unit supports only the linear PCM LPCM signals listed below For details refer to the operating instructions of the connected device Input terminal AES EBU digital input Coaxial digital input Optical digital input Sampling frequency 32 44 1 48 88 2 96 176 4 192 kHz 32 44 1 48 88 2 96 kHz Number of quantization bits 16 24 bit 16 24 bit 41 11 English AC power supply cord connection Connect only after all other connections are completed This unit rear AC power supply cord supplied To a household AC outlet E To disconnect the AC power supply cord from this unit Pull out the AC power supply cord while pressing the top and bottom sides of the connector L e Although the AC power switch is in the HOFF position the unit is not completely disconnected from the mains Remove the plug from the main electrical outlet if you will not be using the unit for an extended period of time Place the unit so the plug can be easily removed
4. A chaque fois que vous appuyez sur la touche Lecture de la piste s lectionn e seulement Sur e 1 gt s affiche Toutes les pistes d un m me fichier sont r p t es pous e gt s affiche D sactiv D sactivation du mode de reprise L e Vous ne pouvez pas utiliser la lecture en reprise al atoire en combinaison avec d autres modes de lecture e Vous pouvez utiliser la lecture en reprise en combinaison avec la lecture programm e 46 Lecture programm e Cette fonction vous permet de programmer jusqu 24 pistes Pr paratifs n est pas possible de programmer des pistes en d pla ant des fichiers D placer toutes les pistes que vous souhaitez programmer dans un fichier unique l avance 1 Appuyer sur PGM dans le mode arr t e L cran Mode program s affichera 2 Appuyer sur OK afin d afficher l cran de programmation 3 Appuyer sur 4 V afin de s lectionner la piste d sir e 4 Appuyer sur OK e R p ter les tapes 3 4 afin de programmer d autres pistes 5 Appuyer sur gt L1 pour lancer la lecture e Afin de revenir l cran Mode program appuyer sur m Operations sur la telecommande Appuyer sur W Arret gt e Le contenu programme est conserv Appuyer sur lt gt dans le mode arr t e Afin de revenir l cran Mode program appuyer sur RETURN V rifier l ordre programm Ajouter des S
5. 1 Appuyer sur SETUP 2 Appuyer r p tition sur A V pour s lectionner MaJ microl puis appuyer sur OK 3 Appuyer sur A V pour s lectionner Oui puis appuyer sur OK Ne d branchez pas le cordon d alimentation secteur et ne mettez pas la touche en marche hors marche de l appareil sur la position HOFF tant que l un des messages suivants est affich Liaison ou Updating e Durant la mise jour aucune autre op ration ne peut tre effectu e e Une fois la mise jour faite Success s affiche 4 D branchez le cordon d alimentation secteur et rebranchez le apr s 3 minutes IT e S il n y a pas de mise jour No Need s affiche apr s l tape 3 e Le t l chargement prendra quelques minutes En fonction des conditions il est possible que cela prenne plus de temps ou ne fonctionne pas correctement M V rification de la version du logiciel en cours 1 Appuyer sur SETUP 2 Appuyer r p tition sur A V pour s lectionner Vers microl puis appuyer sur OK e Appuyer sur OK afin de sortir 50 Code de t l commande Si d autres appareils r pondent au signal de la t l commande fournie modifier le code de la t l commande e Par d faut cette fonction est r gl e sur Mode 1 Orienter la t l commande vers cet appareil puis appuyer sur OK et sur la touche num rique et maintenir votre pression pendan
6. Measuring the characteristics of the amplifier and correcting its output If the SE R1 is connected to this unit via the system control function you can operate using the remote control of this unit Press and hold LAPC until the LAPC indicator on the SE R1 starts to blink e The SE R1 will start measuring the characteristics of the amplifier if it is connected to the speakers L e For information on the operations of the SE R1 please also refer to its operating instructions 12 12 Basic operations Preparation e Prepare the music that you want to play back e Turn on the connected device amplifier etc and lower its volume 1 Press the unit on off button to the I position e The power indicator lights up in blue 2 Press any of the input source buttons 8 LAN Connects this unit to a network and plays back music over it gt 15 AES Plays back music from digital audio COAX output devices e Press COAX repeatedly to select OPT COAX1 COAX2 COAX3 Plays back music stored on a USB USB device or an iPhone iPad iPod gt 16 17 18 PC Plays back music stored on a PC etc gt 19 LINE1 LINE2 Plays back music from analog audio output devices 3 Press 4 V to select an item and then press OK e If there are any other items repeat this step 4 Start play E Using the multi control knob 1 Press and hold RETURN on the unit to display the HOM
7. 10 and 10 LEI e For information on the operations of the SE R1 please also refer to its operating instructions Troubleshooting Before requesting service make the following checks If you are uncertain about some of the check points or if the solutions indicated in the following guide does not resolve the issue then consult your dealer for instructions Heat buildup of this unit e This unit becomes warm when used for a long time This is not a malfunction Do you have the latest firmware installed e Panasonic is constantly improving the unit s firmware to ensure that our customers are enjoying the latest technology gt 22 To return all settings to the factory defaults When the following situations occur reset the memory There is no response when buttons are pressed e You want to clear and reset the memory contents Press SETUP 2 Press 4 VW repeatedly to select Initialization and then press OK Press A V to select Yes and then press OK Press A V to select Yes and then press OK again A humming sound can be heard during playback e An AC power supply cord or fluorescent light is near the cables Keep other appliances and cords away from the cables of this unit No sound e Check the volume of the connected device amplifier etc e Check to see if the cable connections to the input and output terminals are incorrect If
8. Format du fichier gt 28 Pr paratifs e Effectuer les r glages r seau gt 14 e Connecter le dispositif utiliser au m me r seau que cet appareil e Ajouter le contenu et le fichier aux biblioth ques du lecteur Windows Media 11 ou 12 ou celles d un t l phone intelligent etc La liste de lecteur Windows Media ne peut lire que le contenu stock dans les biblioth ques Afin d utiliser le lecteur Windows Media pour lire en continu vous devrez d abord le configurer Lecture du contenu enregistr sur le serveur DLNA en le contr lant depuis cet appareil Vous pouvez lire de la musique enregistr e sur le serveur DLNA de cet appareil DMP Lecteur de musique num rique en contr lant le serveur DLNA avec cet appareil 1 Appuyer sur LAN e L cran de s lection du serveur s affichera 2 Appuyer sur A V pour s lectionner un serveur DLNA sur le r seau puis appuyer sur OK e L cran de s lection du fichier contenu s affichera e Les fichiers le contenu peuvent s afficher dans un ordre diff rent de celui du serveur en fonction de leurs caract ristiques 3 Appuyer sur A V pour s lectionner une rubrique puis appuyer sur OK e S il y a d autres rubriques recommencer l tape plus haut Op rations sur la t l commande Arr t Appuyer sur W Appuyer sur b HH e Appuyer de nouveau pour poursuivre la lecture Pause Appuyer sur 44
9. You can automatically link this unit with the SE R1 and operate them easily with the remote control Preparation Connect this unit and the SE R1 with cables for system control gt 9 Set the input selector knob on the SE R1 to DIGITAL Press the unit on off button on this unit and the SE R1 to the m 1 position If Digital Link is set to Off change the setting to On M Switching this unit and the SE R1 to on standby simultaneously e If you point the remote control at this unit and press when this unit and the SE R1 are in standby mode this unit and the SE R1 will be turned on simultaneously e If you point the remote control at this unit and press DJ when this unit and the SE R1 are turned on this unit and the SE R1 will simultaneously enter standby mode E Measuring the characteristics of the amplifier and correcting its output You can operate using the remote control of this unit M Adjusting Bass Middle Treble You can adjust the tone of the SE R1 with this unit Each tonal range Bass Middle Treble can be adjusted 1 Press SETUP 2 Press 4 W repeatedly to select Tone Control and then press OK 3 Press A W to select On adjustment and then press OK 4 Press A W to select BASS Bass MID Middle or TREBLE Treble 5 Press lt gt to adjust the level and then press OK e Each level can be adjusted between
10. pendant au moins 4 secondes Recherche e L appareil v rifie le serveur DLNA sur le r seau D verr e PC AES COAX1 COAX2 COAX3 ou OPT est s lectionn mais aucun dispositif n est connect V rifiez la connexion avec le dispositif gt 10 11 e Les signaux audio tels que les composants de fr quence d chantillonnage ne sont pas saisis correctement Pour en savoir plus sur le format pris en charge consulter Format du fichier gt 28 USB Erreur de surcharge e L iPhone iPad iPod ou l appareil USB demande trop d nergie D branchez l iPhone iPad iPod ou le dispositif USB et mettez l appareil hors marche puis nouveau en marche Concentrat non p en ch P riph rique incon Non p en ch P riph USB non p en ch e Vous avez branch un iPhone iPad iPod ou un dispositif USB qui n est pas pris en charge Si l iPhone iPad iPod est compatible le mettre en marche avant de l ins rer dans l appareil e Le format du fichier sur l iPhone iPad iPod ou sur le dispositif USB n est pas pris en charge Pour en savoir plus sur le format pris en charge consulter Format du fichier gt 28 53 25 Fran ais Canada 26 Specifications E DONN ES G N RALES Alimentation Consommation Consommation en mode veille Lorsque Veille r seau est d sactiv Lorsque Veille r seau est activ
11. puis appuyer sur OK D sactivation de la sortie audio La d sactivation de la sortie audio des prises non utilis es minimise le bruit et permet une lecture de meilleure qualit sonore e Par d faut cette fonction est r gl e sur Activ 1 Appuyer sur SETUP Pour d sactiver la sortie audio num rique Appuyer r p tition sur A V pour s lectionner Sortie num r puis appuyer sur OK Pour d sactiver la sortie audio analogique Appuyer r p tition sur A VW pour s lectionner Sortie analo puis appuyer sur OK Pour d sactiver la prise de sortie du syst me SE R1 Appuyer r p tition sur A V pour s lectionner Digital Link puis appuyer sur OK 2 Appuyer sur A V pour s lectionner D sactiv puis appuyer sur OK e Pour r activer la sortie s lectionner Activ LI e En fonction de la source de musique que vous lisez il est possible que le param tre appliqu soit moins efficace e En fonction de la source de musique que vous lisez il pourrait tre impossible d arriver la qualit audio et l effet de champ sonore d sir s Dans ce cas d sactiver cette fonction e Les modes rematri age et direct ne peuvent pas tre mis sur Activ e Si Sortie num r Sortie analo et Digital Link sont r gl s sur D sactiv aucun son ne sera produit e Lorsque la fiche d un casque est branch e m me si
12. r p tition sur A V pour s lectionner R seau puis appuyer sur OK 3 S lectionner et saisir les d tails 4 Appuyer sur OK pour appliquer les param tres 5 Appuyer sur RETURN plusieurs reprises afin de quitter l cran des param tres 6 Appuyer sur pour mettre l appareil en mode veille e Attendre que Patienter disparaisse 7 Effectuez Connexion au r seau local branch gt gauche LI e Utilisez des cables r seau locaux de cat gorie 7 ou sup rieure STP lors de leur connexion des appareils p riph riques e Le port r seau local et la prise du syst me sont de forme identique Attention ne pas brancher par m garde le c ble r seau local branch un autre dispositif tel que le routeur large bande la prise du syst me e Si vous ins rez un cable autre qu un c ble r seau local dans la prise r seau vous pourriez endommager l unit e Si vous essayez de modifier les param tres du r seau tout de suite apr s avoir mis cet appareil en marche l cran de r glage du r seau pourrait prendre un certain temps avant de s afficher Lecture de fichiers de musigue sur le serveur DLNA Vous pouvez partager les fichiers musicaux enregistr s dans le serveur multim dia certifi DLNA PC t l phone intelligent etc connect votre r seau domestique et profiter de leur contenu sur cet appareil e Pour en savoir plus sur le format pris en charge consulter
13. AIFF aiff 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bits ALAC m4a 32 44 1 48 88 2 96 kHz 16 24 bits DSD dff dsf 2 8224 5 6448 MHz 1 Si vous t l chargez et installez l appli d di e vous pourrez lire des fichiers dans de nombreux formats gt 19 Pour plus de d tails consulter les instructions de fonctionnement de l appli 2 La possibilit de lire chaque fichier musical sur votre r seau d pend du serveur du r seau m me si le format du fichier est indiqu ci dessus Par exemple si vous utilisez le lecteur Windows Media 11 il ne sera pas possible de lire tous les fichiers musicaux pr sents sur le PC Vous pouvez uniquement lire ceux ajout s la biblioth que du lecteur Windows Media 11 28 55 Con u pour iPod iPhone iPad AirPlay Les mentions Con u pour iPod Con u pour iPhone et Con u pour iPad signifient qu un accessoire lectronique a t sp cialement con u pour y connecter un iPod un iPhone ou un iPad respectivement et que son concepteur atteste qu il r pond aux normes de performance d Apple Apple ne saura tre tenue responsable du fonctionnement de cet appareil ni de sa conformit aux normes de s curit et de r glementation en vigueur Veuillez noter que l utilisation de cet accessoire avec un iPod un iPhone ou un iPad peut nuire la performance sans fil AirPlay iPad iPhone iPo
14. Consommation d nergie en mode hors marche Dimensions LXHXP Poids Temp rature de fonctionnement Humidit relative E SECTION PRISES Entr e analogique Entr e de ligne x2 Entr e num rique Entr e num rique AES EBU Entr e num rique coaxiale X3 Entr e num rique optique USB USB avant Capacit de m moire du support Nombre maximal de dossiers albums Nombre maximal de fichiers chansons Syst me de fichiers Tension du port USB PC USB arri re Sortie analogique BALANCED UNBALANCED Sortie num rique Technics Digital Link Sortie num rique AES EBU Sorties num rique coaxiales Sortie num rique optique Prise des couteurs Interface Ethernet LAN 54 120 V c a 60 Hz 60 W Environ 0 2 W Environ 5 0 W Environ 0 2 W 480 mmXx120 mmx391 mm 18 7 8 pox4 73 32 poX 15 13 32 po Environ 17 kg 37 5 Ib 0 C 40 C 32 F a 104 F 35 Yo 80 Yo sans condensation Prise a broches XLR a 3 broches Prise a broches Prise optique Connecteur de type A 2 To max 800 8000 FAT16 FAT32 DC OUT 5 V 2 1 A max Connecteur de type B XLR a 3 broches Prise a broches XLR a 3 broches Prise a broches Prise optique Prise stereo 6 3 mm 4po 10 Base T 100 Base TX E SECTION FORMAT USB A Norme USB USB forte capacit de stockage PC USB B Norme USB USB sp cification classe audio Mode de contr le DSD M SECTION SORTIE ANALOGIQUE Canaux Niv
15. D COULANT DE L EMPLOI DE CE LOGICIEL M ME EN CAS D ANNONCE LA POSSIBILIT DE TELS D G TS 57 29 Frangais Canada 30 Certificat de garantie limitee Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario L4W 2T3 PRODUIT TECHNICS GARANTIE LIMIT E Panasonic Canada Inc garantit que ce produit est exempt de d fauts de mat riaux et de main d uvre dans un contexte d utilisation normale pendant la p riode indiqu e ci apr s compter de la date d achat original et dans l ventualit d une d fectuosit accepte sa discr tion de a r parer le produit avec des pi ces neuves ou remises neuf b remplacer le produit par un produit neuf ou remis neuf d une valeur quivalente ou c rembourser le prix d achat La d cision de r parer remplacer ou rembourser appartient Panasonic Canada Inc Amplificateur de puissance Technics Lecteur r seau audio avec commande Technics Cinq 5 ans pi ces et main d ceuvre Enceintes acoustiques Technics La pr sente garantie n est fournie qu l acheteur original d un des produits de marque Technics indiqu s plus haut ou la personne l ayant re u en cadeau vendu par un d taillant Panasonic agree au Canada et utilis au Canada Le produit ne doit pas avoir t vendu tel quel gt et doit avoir t livr l tat neuf dans son emballage d origine POUR TRE ADMISSIBLE AUX SERVICES AU TITRE DE
16. English Connecting to analog audio input devices You can output analog audio signals from this unit and play back music e g Pre amplifier with balanced input terminals Pre amplifier with unbalanced input terminals ANALOG IN BALANCED AUDIO IN UNBALANCED AES EBU COAX This unit rear XLR cable not supplied We recommend using cables with a length of 3 m 9 9 ft or less Connecting to analog audio output devices You can input analog audio signals to this unit and play back music e g Player etc Player etc AUDIO OUT AUDIO OUT R L R L l Audio cable not supplied l Audio cable not supplied l a This unit gee EVs OTE rear ANALOG IN 10 o Connecting to digital audio input devices You can output digital audio signals from this unit and play back music e g UNBALANCED This unit rear AES EBU IN COAXIAL IN OPTICAL IN Device that supports AES EBU input pre amplifier etc Device that supports coaxial digital input pre amplifier etc We recommend using cables with a length of 3 m 9 9 ft or less Device that supports optical digital input pre amplifier etc Connecting to digital audio output devices You can input digital audio signals to this unit and play back music e g UNBALANCED This unit ea rear
17. PC Mac Windows to this unit by using the AirPlay or DLNA feature gt 15 17 To use these features this unit must join the same network as the AirPlay compatible device or the DLNA compatible device Wired LAN connection Normally just connecting a LAN cable will complete the setup This unit rear Broadband router etc O C ot LAN TOBASE T 100BASE TX PC etc LAN cable not supplied 1 Disconnect the AC power supply cord 2 Connect this unit to a broadband router etc using a LAN cable 3 Connect the AC power supply cord to this unit and press the unit on off button to the m I position gt 12 14 To make network related settings You can change this unit s name on the network Friendly Name and use specific IP address subnet mask default gateway primary DNS etc e Do not play back music while changing these settings 1 Press SETUP Press A V repeatedly to select Network and then press OK Select and input the details Press OK to apply the settings Press RETURN repeatedly to exit the settings Press DJ to turn the unit to standby mode Wait until Please Wait disappears 7 Perform Wired LAN connection gt left N OAO LJ e Use category 7 or above straight LAN cables STP when connecting to peripheral devices The LAN port and the system terminal are
18. Sortie analo est sur D sactiv il est impossible de d sactiver la sortie audio analogique e La sortie sonore peut prendre un certain temps apr s avoir r gl la qualit de l audio Autres Minuterie sommeil La minuterie sommeil peut passer l appareil en mode veille apr s une p riode d termin e Appuyer sur SLEEP chaque fois que vous appuyez sur la touche 30 minutes 60 minutes 90 minutes 120 minutes T D sactiv lt J LIT e Vous pouvez galement r gler la minuterie sommeil en s lectionnant SOMMEIL l aide de l cran du menu Fonction de mise hors marche automatique Cet appareil est con u pour minimiser sa consommation en lectricit et ainsi conomiser de l nergie L unit est r gl e pour se mettre en mode attente automatiquement s il n y a aucun son et qu elle n est pas utilis e pendant environ 20 minutes e Par d faut cette fonction est r gl e sur Activ Pour annuler cette fonction 1 Appuyer sur SETUP 2 Appuyer r p tition sur A V pour s lectionner H M AUTO puis appuyer sur OK 3 Appuyer sur A V pour s lectionner D sactiv puis appuyer sur OK LI e La fonction de mise hors marche automatique fonctionne sauf si vous la d sactivez m me lorsque vous mettez cet appareil hors marche puis en marche e Si Veille r seau est r gl sur Activ cett
19. and 30 seconds Remote L O stands for a number e The remote control and this unit are using different codes Change the code on the remote control When Remote 1 is displayed press and hold OK and 1 for at least 4 seconds When Remote 2 is displayed press and hold OK and 2 for at least 4 seconds Searching e The unit is checking the DLNA server on the network Unlocked e PC AES COAX1 COAX2 COAX3 or OPT is selected but no device is connected Check the connection with the device gt 10 11 e Audio signals such as sampling frequency components are not input correctly About supported format refer to File format gt 28 USB Over Current Error e The iPhone iPad iPod or USB device is drawing too much power Disconnect the iPhone iPad iPod or USB device and turn the unit off and on again Hub Device Not Supported Unrecognizable Device Unsupported Unsupported USB Device e You have connected an iPhone iPad iPod or USB device that is not supported If the iPhone iPad iPod is compatible turn it on and connect it correctly e The format of the file on the iPhone iPad iPod or USB device is not supported About supported format refer to File format gt 28 25 25 English 26 Specifications E GENERAL Power supply Power consumption Power c
20. de certains points de v rification ou si les solutions indiqu es dans ce guide ne r solvent pas le probl me consulter votre revendeur Accumulation de chaleur de cet appareil e Cet appareil chauffe lorsque le volume est lev Il ne s agit pas d une erreur de fonctionnement La plus r cente version du micrologiciel est elle install e e Panasonic am liore sans cesse le micrologiciel de cet appareil afin que ses clients puissent profiter des technologies les plus r centes gt 22 R tablissement de tous les param tres par d faut Dans les situations suivantes r initialiser la m moire e Absence de r ponse aux pressions sur les touches e Pour vider la m moire et en r initialiser le contenu Appuyer sur SETUP Appuyer r p tition sur A V pour s lectionner Initialisation puis appuyer sur OK Appuyer sur A VW pour s lectionner Oui puis appuyer sur OK Appuyer sur A V pour s lectionner Oui puis appuyer nouveau sur OK G n ralit Un bourdonnement se fait entendre la lecture e Un cordon d alimentation secteur ou une lampe fluorescente se trouve pr s des c bles Eloignez les autres appareils et les autres cordons des c bles de ce syst me Aucun son e V rifier le volume du dispositif branch amplificateur etc e V rifier que les raccordements de cables sur les prises entrantes et sortantes ne sont pas incorrects
21. display the HOME menu gt 13 Headphones jack For connecting a headphone plug e Excessive sound pressure from earphones and headphones can cause hearing loss Listening at full volume for long periods may damage the user s ears 9 Multi control knob gt 13 e Turn this knob clockwise or anticlockwise to switch the input source scroll through items and skip during playback e To set an item press the knob to enter the menu screen press and hold it Analog audio output terminal UNBALANCED gt 10 Analog audio input terminals LINE1 LINE2 gt 10 System terminal Technics Digital Link OUT gt 9 Product identification marking The model number is indicated Analog audio output terminal BALANCED gt 10 5 Digital audio output terminal AES EBU gt 11 Digital audio output terminal COAXIAL gt 11 Digital audio output terminal OPTICAL gt 11 Digital audio input terminal AES EBU gt 11 Digital audio input terminals COAXIAL1 COAXIAL2 COAXIAL3 gt 11 Digital audio input terminal OPTICAL gt 11 LAN port LAN gt 14 Digital audio input terminal PC gt 19 For connecting to a PC etc AC IN terminal AC IN 12 English Remote control 00 000 DIMMER LAN AES coax OPT usB Pc LINE1 unez HOME INFO
22. partir du site internet ci dessous www technics com support 2 T l charger et installer l appli d di e Technics Audio Player sans frais sur votre PC Adapt e la fois au SE Windows et a OS X T l charger et installer l appli d di e partir du site internet ci dessous www technics com support a compter de novembre 2014 coute de l audio partir d un PC etc 1 D brancher le cordon d alimentation secteur 2 Brancher un PC etc cet appareil ex Cet appareil arri re 3 Brancher le cordon d alimentation secteur cet appareil puis mettre la touche en marche hors marche de l appareil sur la position m I gt 12 4 Appuyer sur PC 5 Utiliser l ordinateur etc pour la lecture 47 19 Frangais Canada Reglage du rendu sonore Les effets sonores suivants peuvent tre ajout s la sortie audio coute d audio plus naturel Rematricer Le rematri age agrandit la bande de lecture et permet une profondeur de bit plus importante afin de reproduire un son naturel et complet proche de la musique originale e Par d faut cette fonction est r gl e sur D sactiv Appuyer sur RE MASTER pour s lectionner Activ D sactiv Mode direct Cet appareil peut transmettre des signaux d entr e sans les faire passer par son processeur de signaux num riques DSP en empruntant le chemin le plus court Cela permet une repro
23. rique optique 32 44 1 48 88 2 96 kHz 16 24 bit 39 11 Frangais Canada 12 Raccordement du cordon d alimentation Brancher le cordon d alimentation apres gue tous les autres raccordements sont completes arriere ANALOG IN Cet appareil O2 0 0 a FAIRE NE PAS FAIRE Cordon d alimentation fourni Vers une prise de courant E Pour d brancher le cordon d alimentation secteur de cet appareil Tirez sur le c ble d alimentation secteur tout en appuyant au dessus et sur les c t s du connecteur LJ e M me lorsque le commutateur d alimentation secteur est sur la position OFF l appareil n est pas compl tement d connect du r seau lectrique Retirez la fiche de la prise lectrique secteur si vous ne devez plus utiliser cet appareil pendant un assez long moment Placez cet appareil de mani re ce que la fiche puisse tre facilement retir e Mesure des caract ristiques de l amplificateur et correction de son mission Si le SE R1 est connect cet appareil via la fonction de contr le du syst me vous pouvez le contr ler gr ce la t l commande de cet appareil Appuyer et maintenir une pression sur LAPC jusqu ce que le voyant LAPC du SE R1 se mette clignoter e Le SE R1 commencera mesurer les caract ristiques de l amplificateur s il est connect aux enceintes LJ e Pour en savoir plus sur le fonction
24. this is the case turn off this unit and reconnect the cables correctly e Check to see if the correct input source is selected Insert the plugs of the cables to be connected all the way in e When Digital Output Analog Output and Digital Link are set to Off no sound will be output Change the setting of the output terminal to be used to On 20 e Playback of multi channel content is not supported e The digital audio input terminals of this unit can only detect linear PCM LPCM signals For details refer to the operating instructions of the connected device 23 23 English 24 The sound is interrupted Depending on your environment the audio may be interrupted during playback Check the operating instructions of the connected device and the connection to the device Playback does not start e Depending on your environment or connected devices it may take some time The system control function is not working e Connect the cables to the matching LR terminals on this unit and the SE R1 The unit turns off automatically e Is the auto off function turned on gt 21 AirPlay DLNA Cannot connect to the network Confirm the network connection and settings gt 14 Cannot connect to the unit Make sure that the multicast function on the wireless router is enabled e Make sure that the device and the unit are connected to the same network gt 14 e Reconnect t
25. un ch ssis s par pour l amplificateur de puissance qui prend en charge des fr quences hautes et de larges courants De plus l interface de transmission de signal nouvellement con ue par Technics minimise la d gradation d exactitude temporelle et d amplitude qui se produit lorsque des signaux sont transmis entre le lecteur de contr le r seau et l amplificateur de puissance arrivant ainsi une configuration d amplificateur id ale Architecture d isolation du son num rique Comme la plupart des supports de stockage de contenu num rique sont destin s une utilisation avec des ordinateurs ils ne sont pas con us pour du bruit faible ce qui est essentiel pour assurer une reproduction pure de l audio Afin de surmonter ce d fi cet appareil se sert d une mesure pr cise contre la gigue et d une technologie bloquant le bruit en exc s de chacune de ses interfaces afin d mettre un son pur Alimentation analogique num rique s par e Un transformateur R core bruit faible d di avec d excellentes caract ristiques de r gulation est fourni individuellement pour le circuit analogique et le circuit num rique permettant une reproduction du son de grande qualit E Dispositifs recommand s Nous conseillons d utiliser des dispositifs Technics en option afin d obtenir une qualit sonore sup rieure Nom du produit Num ro du mod le Amplificateur de puissance SE R1 Enceinte acoustique SB R1 32 IMP
26. utiliser conjointement des piles usag es et neuves ou de types diff rents Lors de la mise au rebut des piles contacter les autorit s locales ou le d taillant et s informer de la bonne fa on de proc der AVIS RISQUE DE CHOC LECTRIQUE NE PAS OUVRIR AVIS AFIN DE PR VENIR LE RISQUE DE CHOCS LECTRIQUES NE PAS RETIRER LES VIS CONFIER TOUTE R PARATION UN TECHNICIEN QUALIFI Le symbole de l clair dans un triangle quilat ral indique la pr sence d une tension suffisamment lev e pour engendrer un risque de chocs lectriques Le point d exclamation dans un triangle quilat ral indique que le manuel d utilisation inclus avec l appareil contient d importantes recommandations quant au fonctionnement et l entretien de ce dernier Conforme la norme CAN CSA STD C22 2 No 60065 CE QUI SUIT NE S APPLIQUE QU AU CANADA CAN ICES 3 B NMB 3 B Information sur la mise au rebut dans les pays n appartenant pas l Union europ enne Ce symbole est uniquement valide dans l Union europ enne Si vous d sirez mettre ce produit au rebut contactez l administration locale ou le revendeur et informez vous de la bonne fa on de proc der z 33 5 Fran ais Canada Table des matieres IMPORTANTES MISES EN GARDE cecceseeeeeereeereees 5 Utilisation de AirPlay 17 ACCeSSOITOS rein redire etienne ire 6 Avec u
27. www technics com support 41 13 Frangais Canada 14 Reglages reseau Vous pouvez lire en continu de la musigue provenant d un dispositif iOS iPhone iPad iPod d un Android ou d un ordinateur Mac Windows sur cet appareil grace aux fonctions AirPlay ou DLNA gt 15 17 Pour utiliser ces fonctions cet appareil doit tre sur le m me r seau que l appareil compatible avec AirPlay ou que l appareil compatible avec DLNA Connexion au r seau local branche En r gle g n rale la simple connexion d un cable r seau local devrait effectuer l installation Cet appareil arri re Routeur large bande etc amp Y Tp O c La 1OBASE T 100BASE TX Cable r seau local non fourni 1 D brancher le cordon d alimentation secteur 2 Connecter cet appareil un routeur large bande etc l aide d un cable r seau local 3 Brancher le cordon d alimentation secteur cet appareil puis mettre la touche en marche hors marche de l appareil sur la position m I gt 12 42 Pour effectuer des r glages de r seau Vous pouvez changer le nom de cet appareil sur le r seau Nom convivial et utiliser une adresse IP un masque de sous r seau une passerelle par d faut un serveur DNS principal etc sp cifiques e Ne pas lire de musique lors de la modification de ces param tres 1 Appuyer sur SETUP Appuyer
28. CIALISATION ET UN USAGE PARTICULIER PANASONIC CANADA INC N AURA D OBLIGATION EN AUCUNE CIRCONSTANCE POUR TOUT DOMMAGE DIRECT INDIRECT OU CONSECUTIF RESULTANT DE L UTILISATION DE CE PRODUIT OU DECOULANT DE TOUTE DEROGATION A UNE GARANTIE EXPRESSE OU IMPLICITE A titre d exemples cette garantie exclut les dommages relatifs une perte de temps le transport jusqu et depuis un centre de service agr la perte ou la d t rioration de supports ou d images de donn es ou de tout autre contenu en m moire ou enregistr Cette liste n est pas exhaustive et n est fournie qu des fins explicatives Certaines juridictions ne reconnaissent pas les exclusions ou limitations de dommages indirects ou cons cutifs ou les exclusions de garanties implicites Dans de tels cas les limitations stipul es ci dessus peuvent ne pas tre applicables La pr sente garantie vous conf re des droits pr cis vous pourriez aussi avoir d autres droits pouvant varier selon votre province ou territoire de r sidence SERVICE SOUS GARANTIE Pour tout renseignement sur les produits r paration ou assistance technique veuillez visiter notre page Soutien www panasonic ca french support EXPEDITION D UN PRODUIT A UN CENTRE DE SERVICE Emballez soigneusement de pr f rence dans son carton d origine et exp diez franco de port suffisamment assur Accompagnez le tout d une description de la d fectuosit pr sum e et d une pi ce justificative de la
29. E menu 2 Turnthe multi control knob clockwise or anticlockwise to select an input source and then press the knob 3 Turn the multi control knob clockwise or anticlockwise to select an item and then press the knob 4 Start play Adjusting the volume of the headphones or the SE R1 Connect this unit and the SE R1 with cables for system control gt 23 M Adjusting the volume Press VOL e dB min 99 0 dB to 0 dB max e When adjusting the volume of the SE R1 set the input selector knob on the SE R1 to DIGITAL M Muting the sound Press MUTE e r x is displayed e Press again to cancel rl x is also canceled when the volume is adjusted or the unit is turned off Display brightness The brightness of this unit s display and the power indicator can be changed Press DIMMER repeatedly LE When the display is turned off it will light up only when you operate this unit Before the display turns off again Display Off will be displayed for a few seconds Operations using the dedicated app Technics Music App If you install the dedicated app Technics Music App free of charge on your tablet smartphone you can control this unit and the SE R1 using a wide variety of functions For details visit www technics com support a3 13 English 14 Network settings You can stream music from an iOS device iPhone iPad iPod an Android device or a
30. G APPLIES ONLY IN THE U S A FCC Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help FCC Caution To assure continued compliance follow the attached installation instructions and use only shielded interface cables when connecting to peripheral devices Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device complie
31. LA PR SENTE GARANTIE LA PR SENTATION D UN REGU D ACHAT OU DE TOUTE AUTRE PI CE JUSTIFICATIVE DE LA DATE D ACHAT ORIGINAL INDIQUANT LE MONTANT PAYE ET LE LIEU DE L ACHAT EST REQUISE RESTRICTIONS ET EXCLUSIONS La pr sente garantie COUVRE SEULEMENT les d faillances attribuables un d faut des mat riaux ou un vice de fabrication et NE COUVRE PAS l usure normale ni les dommages esth tiques La pr sente garantie NE COUVRE PAS NON PLUS les dommages subis pendant le transport les d faillances caus es par des produits non fournis par Panasonic Canada Inc ni celles r sultant d un accident d un usage abusif ou impropre de n gligence d une manutention inad quate d une mauvaise application d une alt ration d une installation ou de r glages impropres d un mauvais r glage des contr les de l utilisateur d un mauvais entretien d une surtension temporaire de la foudre d une modification de la p n tration de sable de liquides ou d humidit d une utilisation commerciale dans un h tel un bureau un restaurant ou tout autre usage par affaires ou en location d une r paration effectu e par une entit autre qu un centre de service Panasonic agr ou encore d une catastrophe naturelle Les piles s ches sont galement exclues de la pr sente garantie CETTE GARANTIE LIMIT E ET EXPRESSE REMPLACE TOUTE AUTRE GARANTIE EXPRESSE OU IMPLICITE INCLUANT LES GARANTIES IMPLICITES DU CARACT RE AD QUAT POUR LA COMMER
32. NCED UNBALANCED THD N BALANCED UNBALANCED S N BALANCED UNBALANCED Dynamic range USB 2 0 high speed USB 2 0 high speed USB Audio Class 2 0 Asynchronous mode ASIO Native mode DoP mode DSD64 DSD128 playback 2ch 2 3 Vrms 2 3 Vrms 180 mW 180 mW 32 Q 2 Hz to 90 kHz 3 dB 2 Hz to 90 kHz 3 dB 0 0008 1 kHz 0 dB 0 0008 1 kHz 0 dB 118 dB IHF A 115 dB IHF A BALANCED 118 dB IHF A UNBALANCED 115 dB IHF A TT e Specifications are subject to change without notice e Mass and dimensions are approximate When the iPhone iPad iPod is not charging 27 27 English E File format This unit supports the following file formats e This unit does not support the playback of copy protected music files e Playback of all files in formats supported by this unit is not guaranteed e Playback of a file in a format not supported by this unit may cause choppy audio or noise In such cases check to see if this unit supports the file format e This unit does not support VBR Variable Bit Rate playback Some of the connected devices servers may be capable of converting files in formats not supported by this unit and output them For details refer to the operating instructions for your server File information Sampling frequency etc shown by this unit and playback software may differ from each other USB A File format Extension Sampling freguency N Bit ra
33. NTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 29 29 English 30 Limited Warranty ONLY FOR U S A Technics Products Limited Warranty Limited Warranty Coverage For USA Only If your product does not work properly because of a defect in materials or workmanship Panasonic Corporation of North America referred to as the warrantor will for the length of the period indicated on the chart below which starts with the date of original purchase warranty period atits option either a repair your product with new or refurbished parts b replace it with a new or a refurbished equivalent value product or c refund your purchase price The decision to repair replace or refund will be made by the warrantor Product or Part Name Parts Labor Technics Stereo Power Amp Technics Audio Control Player 5 five years 5 five years Technics Speaker System
34. ORTANTES MISES EN GARDE Avant d utiliser l appareil lire attentivement les instructions qui suivent Se conformer tout particuli rement aux avertissements inscrits sur l appareil et aux consignes de s curit indiqu es ci dessous Conserver le pr sent manuel pour consultation ult rieure 1 Lire attentivement ces instructions 2 Conserver ces instructions 3 Lire toutes les mises en garde 4 Suivre toutes les instructions 5 Ne pas utiliser cet appareil pr s d une source d eau 6 Ne nettoyer qu avec un chiffon sec 7 Ne pas bloquer les events d a ration Installer l appareil selon les instructions du fabricant 8 Ne pas installer l appareil pr s d un appareil de chauffage tel qu un radiateur une cuisini re un registre de chaleur ou tout dispositif mettant de la chaleur y compris un amplificateur 9 Pour des raisons de s curit ne pas modifier la fiche polaris e ou celle de mise a la terre Une fiche polaris e est une fiche deux lames dont une plus large Une fiche de mise la terre est une fiche deux lames avec une broche de masse La lame plus large ou la broche de masse procure une protection accrue Si ce genre de fiche ne peut tre ins r dans une prise de courant communiquer avec un lectricien pour remplacer la prise 10 S assurer que le cordon est plac dans un endroit o il ne risque pas d tre cras pi tin ou coinc Faire particuli rement attention ses extr mit s de branche
35. Si c est le cas mettre cet appareil hors marche et rebrancher les cables correctement e V rifier que la source entrante correcte est s lectionn e e Ins rer les fiches des cables brancher jusqu au bout e Si Sortie num r Sortie analo et Digital Link sont r gl s sur D sactiv aucun son ne sera produit Changer le param tre de la prise de sortie utiliser pour Activ gt 20 e La lecture de contenu multicanal n est pas prise en charge e Les prises d entr e audio num rique de cet appareil peuvent seulement d tecter les signaux PCM LPCM lin aires Pour plus de d tails consulter le manuel d utilisation du dispositif connect 51 23 Fran ais Canada 24 Le son est interrompu e Selon votre environnement il est possible que l audio soit interrompu au cours de la lecture Consulter les instructions de fonctionnement du dispositif branch et v rifier le branchement au dispositif La lecture ne se lance pas e Selon votre environnement ou vos dispositifs branch s il est possible que cela prenne un certain temps La fonction de contr le du syst me ne fonctionne pas e Branchez les c bles aux terminaux LR correspondants sur cet appareil et sur SE R1 L appareil se met automatiquement hors marche e La fonction de mise hors contact automatique est elle activ e gt 21 AirPlay DLNA La connexion au r seau ne peut tre tablie e V rifier la con
36. TICAL IN COAXIAL IN AES EBU IN i Dispositif prenant en Dispositif prenant en charge Dispositif prenant en charge charge l entr e AES EBU l entr e num rique coaxiale l entr e num rique optique pr amplificateur etc pr amplificateur etc pr amplificateur etc Nous conseillons d utiliser des c bles d une longueur de 3 m 9 9 pi ou moins Connexion des dispositifs de sortie audio num rique Vous pouvez envoyer des signaux audio num riques cet appareil et lire de la musique ex Cet appareil a arri re C ble audio optique num rique non fourni C ble AES EBU non fourni AES EBU OUT OPTICAL OUT COAXIAL OUT Dispositif prenant en charge Dispositif prenant en charge Dispositif prenant en charge la sortie AES EBU la sortie num rique coaxiale la sortie num rique optique lecteur etc lecteur etc lecteur etc Nous conseillons d utiliser des c bles d une longueur de 3 m 9 9 pi ou moins L e Les prises d entr e audio num rique de cet appareil ne prennent en charge que les signaux PCM lin aires LPCM list s ci dessous Pour plus de d tails consulter le manuel d utilisation du dispositif connect Prise d entr e Fr quence d echantillonnage Nombre de bits de quantification Entr e num rique AES EBU Entr e num rique coaxiale 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bit Entr e num
37. TIONS AND EXCLUSIONS This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage The warranty ALSO DOES NOT COVER damages which occurred in shipment or failures which are caused by products not supplied by Panasonic Canada Inc or failures which result from accidents misuse abuse neglect mishandling misapplication alteration faulty installation set up adjustments misadjustment of consumer controls improper maintenance power line surge lightning damage modification introduction of sand humidity or liquids commercial use such as hotel office restaurant or other business or rental use of the product or service by anyone other than an Authorized Servicer or damage that is attributable to acts of God Dry cell batteries are also excluded from coverage under this warranty THIS EXPRESS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN NO EVENT WILL PANASONIC CANADA INC BE LIABLE FOR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY As examples this warranty excludes damages for lost time travel to and from the Authorized Servicer loss of or damage to media or images data or other memory or recorded content This list of items is not exhaustiv
38. Technics Owner s Manual Network Audio Control Player Manuel d utilisation Lecteur reseau audio avec commande SU R1 Music is borderless and timeless touching people s hearts across cultures and generations Each day the discovery of a truly emotive experience from an unencountered sound awaits Let us take you on your journey to rediscover music Sans fronti res la musique est aussi intemporelle touchant le coeur des gens en traversant Les cultures et Les g n rations Tous les jours nous attendons la r v lation d une exp rience motionnelle authentique partir d un son venu de nulle part Permettez nous de vous emmener en voyage pour red couvrir la musique Rediscover Music Technics Thank you for purchasing this product Please read these instructions carefully before using this product and save this manual for future use If you have any guestions visit U S A www panasonic com support Canada www panasonic ca english support Register online at www panasonic com register U S customers only E Features of this unit This unit offers the following features Technics Digital Link Technics has minimized the length of the signal path by enclosing the network audio player and input selector which handle very weak signals into the same chassis and reduced noise entering weak signals as much as possible by using a separate chassis for the power amplifier which handles high frequencies and lar
39. andby mode when this unit is selected as the AirPlay DLNA player e The factory default is Off 1 Press SETUP 2 Press A V repeatedly to select Network Standby and then press OK 3 Press 4 V to select On and then press OK L e f this function is set to On the standby power consumption will increase Language Select English or French for the display e The factory default is English 1 Press SETUP 2 Press A V repeatedly to select Language and then press OK 3 Press A V to select English Fran ais and then press OK 21 21 English 22 Firmware updates Occasionally Panasonic may release updated firmware for this unit that may add or improve the way a feature operates These updates are available free of charge Preparation e Connect this unit to the network gt 14 Make sure that the network is connected to the Internet 1 Press SETUP 2 Press A V repeatedly to select F W Update and then press OK 3 Press A V to select Yes and then press OK Remote control code When other equipment responds to the supplied remote control change the remote control code e The factory default is Mode 1 Point the remote control at this unit and press and hold OK and the numeric button for at least 4 seconds e When the remote control code is changed the new code will appear on the displ
40. appareils USB 16 17 Voyant d alimentation La couleur du voyant change en fonction de l tat de cet appareil Bleu L appareil est en marche Rouge L appareil est en mode veille Capteur de signal de t l commande Distance l int rieur d environ 7 m 23 pi directement en avant Angle environ 30 vers la gauche ou la droite Bouton du volume R glez le volume des couteurs ou du SE R1 gt 13 e n est pas possible de r gler le volume des dispositifs connect s aux prises de sortie audio analogique ou num rique e La vitesse a laquelle le volume est r gl change en fonction de la vitesse a laquelle vous tournez le bouton Afficheur Touches de contr le l mentaires gt Lecture Pause RETURN Revenir l affichage pr c dent e Appuyez sur RETURN de l appareil et restez appuy pour afficher le menu ACCUEIL gt 13 Prise des couteurs Pour brancher une fiche d couteurs e Une pression sonore excessive provenant d couteurs ou d un casque audio peut provoquer une perte auditive e L coute prolong e volume lev peut endommager l audition de l utilisateur Bouton multi contr le gt 13 e Tourner ce bouton dans le sens des aiguilles d une montre ou dans le sens contraire afin de changer de source entrante de faire d filer des l ments et de passer une chanson lors de la lecture e Pour r gler un l ment appuyer sur le bouton
41. awa 19 Sound adjustment wanawaza aaazzanznza 20 Others uses cst daeraad an aaa aa aa raaa aeaa 21 Troubleshooting 23 Specifications sssteierresnienneesientensennensense 26 Limited Warranty ONLY FOR U S A w smmanzmmamzwanza 30 Limited Warranty ONLY FOR CANADA 0ee 31 About descriptions in this Owner s Manual e Pages to be referred to are indicated as gt OO e The illustrations shown may differ from your unit e Unless otherwise indicated operations are described using the remote control Accessories 1 AC power supply cord K2CB2YY00107 ONLY FOR CANADA 1 Remote control N2QAYA000095 2 Batteries for remote control cman 000880 2080000 ono moan 3 The enclosed Canadian French label sheet corresponds to the English display on the unit L e Product numbers provided in this Owner s Manual are correct as of December 2014 These may be subject to change Do not use AC power supply cord with other equipment E Using the remote control Insert the battery so the terminals and match those in the remote control Point it at the remote control signal sensor on this unit 7 Keep the batteries out of reach of children to prevent swallowing Unit care R03 LR03 AAA Alkaline or manganese batteries Pull out the AC power supply cord
42. ay for a few seconds OK 1 Set the code to Mode 1 OK 2 Set the code to Mode 2 Do not disconnect the AC power supply cord or press the unit on off button to the HOFF position while one of the following messages is displayed Linking or Updating e During the update process no other operations can be performed e When the update has finished successfully Success is displayed 4 Disconnect the AC power supply cord and reconnect it after 3 minutes LEI e f there are no updates No Need is displayed after step 3 e Downloading will require several minutes It may take longer or may not work properly depending on the connection environment M Checking the firmware version 1 Press SETUP 2 Press A V repeatedly to select F W Version and then press OK e Press OK to exit 22 Changing the character encoding You can change the character encoding of track names artist names and other information when they are not displayed as they should be e The factory default is Type 1 HA Y 1 Press SETUP 2 Press A V repeatedly to select E Asian Character and then press OK 3 Press A V to select Type 1 HA Type 2 fii and then press OK Type 1 HA Priority is given to Japanese i Priority is given to Chinese Type 2 EF Simplified Using the system control function
43. cause a fire Remove the battery if you do not intend to use the remote control for a long period of time Store in a cool dark place Do not heat or expose to flame Do not leave the battery ies in a car exposed to direct sunlight for a long period of time with doors and windows closed Do not take apart or short circuit Do not recharge alkaline or manganese batteries Do not use batteries if the covering has been peeled off Do not mix old and new batteries or different types at the same time e When disposing of the batteries please contact your local authorities or dealer and ask for the correct method of disposal CAUTION RISK OF ELECTRIC SHOCK DONOTOPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE SCREWS NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Conforms to UL STD 60065 Certified to CAN CSA STD C22 2 No 60065 THE FOLLOWIN
44. charge par cet appareil et de les lire Pour plus de d tails consulter les instructions de fonctionnement de votre serveur e Les informations du fichier fr quence d chantillonnage etc affich es par cet appareil et par le logiciel de lecture peuvent diff rer USB A Format du Extension Fr quence d chantillonnage D bit binaire we ea fichier Nombre de bits de guantification MP3 mp3 32 44 1 48 kHz 16 kbps a 320 kbps AAC m4a aac 32 44 1 48 88 2 96 kHz 16 kbps 320 kbps WMA wma 32 44 1 48 kHz 16 kbps a 320 kbps WAV wav 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bits FLAC flac 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bits AIFF aiff 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bits ALAC m4a 32 44 1 48 88 2 96 kHz 16 24 bits DSD dff dsf 2 8224 5 6448 MHz PC USB B Format du Extension Fr quence d chantillonnage D bit binaire fichier 9 9 Nombre de bits de quantification LPCM 32 44 1 48 88 2 96 176 4 192 352 8 384 kHz 16 24 32 bits DSD dff dsf 2 8224 5 6448 MHz LAN DLNA 2 Format du Extension Fr quence d chantillonnage D bit binaire Ne fichier Nombre de bits de quantification MP3 mp3 32 44 1 48 kHz 16 kbps a 320 kbps AAC m4a aac 32 44 1 48 88 2 96 kHz 16 kbps 320 kbps WMA wma 32 44 1 48 kHz 16 kbps a 320 kbps WAV wav 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bits FLAC flac 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bits
45. d e Charging stops when the battery is fully charged The battery will deplete naturally Using AirPlay AirPlay works with iPhone iPad and iPod touch with iOS 4 3 3 or later Mac with OS X Mountain Lion or later and PC with iTunes 10 2 2 or later Listening to music with AirPlay Preparation e Complete the network settings gt 14 e Connect the iOS device or PC to the same network as this unit 1 ios device Start the Music or iPod app PC Start iTunes 1 2 from 2 Select Technics SU R1 the AirPlay icon e Check the volume settings before starting the playback When AirPlay is used for the first time the volume may be output at the maximum setting 3 Start play e The playback will start with a slight delay Operations on the remote control Stop Press W Press gt 1 Que e Press again to restart play Skip Press k lt or gt to skip track LE e Playback of other audio sources will stop and AirPlay output will have priority e With some iOS and iTunes versions it may not be possible to restart the AirPlay playback if the selector is changed or the unit is turned off during the AirPlay playback In this case select a different device from the AirPlay icon of the Music app or iTunes and then re select this unit as the output speakers e AirPlay will not work when playing back videos on iTunes 1 stands for a
46. d iPod nano et iPod touch sont des marques d pos es par Apple Inc enregistr es aux Etats Unis et dans d autres r gions iPad Air et iPad mini sont des marques de commerce de Apple Inc Mac et OS X sont des marques de commerce de Apple Inc d pos es aux Etats Unis et dans les autres pays Android est une marque de commerce de Google Inc DLNA le logo DLNA et DLNA CERTIFIED sont des marques de commerce des marques de service ou des marques de certification de la Digital Living Network Alliance Direct Stream Digital DSD et leurs logos sont des marques d pos es de Sony Corporation La technologie de codage audio MPEG Layer 3 est sous licence de Fraunhofer IIS et Thomson Windows et Windows Vista sont soit des marques d pos es soit des marques de commerce de Microsoft Corporation aux tats Unis et ou dans d autres pays Windows Media et le logo Windows sont soit des marques d pos es soit des marques de commerce de Microsoft Corporation aux tats Unis et ou dans d autres pays Ce produit est prot g par des droits sur la propri t intellectuelle de Microsoft Corporation et de tiers L utilisation ou la distribution d une telle technologie sans ce produit est interdite sans une licence de Microsoft ou d une filiale Microsoft autoris e ou de tiers certifi s D codeur FLAC Copyright C 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 Josh Coalson La redistributio
47. d Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage The warranty ALSO DOES NOT COVER damages which occurred in shipment or failures which are caused by products not supplied by the warrantor or failures which result from accidents misuse abuse neglect mishandling misapplication alteration faulty installation set up adjustments misadjustment of consumer controls improper maintenance power line surge lightning damage modification introduction of sand humidity or liquids commercial use such as hotel office restaurant or other business or rental use of the product or service by anyone other than a Factory Service Center or other Authorized Servicer or damage that is attributable to acts of God The model number and serial number of this product can be found on either the back or the bottom of the unit Please note them in the space provided below and keep for future reference MODEL NUMBER SERIAL NUMBER SU R1 THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY As examples this excludes damages for lost time travel to and from the servicer loss of or damage to media or images data or oth
48. d clear the track desired programed track Press PGM in the stop mode Cancel e Program Clear is shown Press A V to select Yes and then press OK e The program memory will be cleared program mode Ley e Programed content is maintained as long as the input source is set to USB e The program memory will be cleared When the USB device is disconnected When the unit is turned to standby or off mode e You can use program playback in combination with repeat playback Using PC etc You can connect the digital audio input terminal PC and a PC etc with a USB cable and play back music on the PC etc with this unit About supported format refer to File format gt 28 Connecting to a PC Before connecting to a PC follow the steps below Refer to the following for the recommend OS versions for your PC Windows Vista Windows 7 Windows 8 Windows 8 1 OS X 10 7 10 8 10 9 10 10 Download and install the dedicated driver to the PC Only for Windows OS Download and install the driver from the website below www technics com support Download and install the dedicated app Technics Audio Player free of charge on your PC Common to both Windows OS and OS X Download and install the app from the website below www technics com support as of November 2014 Listening to audio from a PC etc 1 Disconnect the AC pow
49. date d achat original Homologation Il est recommand de noter dans l espace pr vu ci dessous le DATE D ACHAT num ro de mod le et le num ro de s rie inscrits l arri re ou D TAILLANT sous le fond de l appareil et de conserver ce manuel pour r f rence ult rieure ADRESSE DU DETAILLANT NUMERO DE MODELE SU R1 NUM RO DE S RIE N DE T L PHONE 58 epeue siesuesy Delivering the Ultimate Emotive Musical Experience to ALL At Technics we understand that the listening experience is not purely about technology but the magical and emotional relationship between people and music We want people to experience music as it was originally intended and enable them to feel the emotional impact that enthuses and delights them Through delivering this experience we want to support the development and enjoyment of the world s many musical cultures This is our philosophy With a combination of our love of music and the vast high end audio experience of the Technics team we stand committed to building a brand that provides the ultimate emotive musical experience by music lovers for music lovers Apportez tous l exp rience musicale empreinte d motions Chez Technics nous savons que l exp rience de l coute n est pas purement et simplement une question de technologie mais de relation magique entre les personnes et la musique Nous voulons que tout un chacun puisse ressenti
50. digit that is unique to each set 2 The device name can be changed from To make network related settings gt 14 Using USB device You can play back music stored on a USB device This unit does not guarantee connection with all USB devices e FAT16 and FAT32 file systems are supported This unit supports USB 2 0 high speed e USB devices may not be recognized by this unit when connected using the following a USB hub a USB extension cable e It is not possible to use USB card reader writers This unit cannot record music to a USB device e About supported format refer to File format gt 28 Listening to music stored on a USB device 1 Connect a USB device to the unit e g This unit C e front o iront USB device 2 Press USB 3 Press 4 V to select an item and then press OK e f there are any other items repeat this step Operations on the remote control Stop Press W Press PDP 1 Pause e Press again to restart play Press lt or PPI to skip track e f you press either of these buttons during pause playback will restart Skip During play or pause press and hold lt lt lt or gt gt e This operation may not be available for some formats Search 17 17 English 18 E Random repeat playback Press RND Each time you press the button All
51. duction fid le et de haute qualit du son original e Par d faut cette fonction est r gl e sur D sactiv Appuyer sur DIRECT pour s lectionner Activ D sactiv R glage de la fr quence d chantillonnage Vous pouvez tablir une limite maximale sur la gamme de fr quence d chantillonnage de sortie Il faut savoir que la gamme pouvant tre trait e varie selon l amplificateur ou le convertisseur N A Pour plus de d tails consultez les instructions de fonctionnement pour le dispositif connect e Par d faut cette fonction est r gl e sur 32kHz 192kHz Pr paratifs e Mettre Sortie num r sur Activ 1 Appuyer sur SETUP 2 Appuyer r p tition sur A V pour s lectionner Sortie n f puis appuyer sur OK 3 Appuyer sur A V pour s lectionner une rubrique puis appuyer sur OK e Vous pouvez s lectionner une fr quence d chantillonnage de 96 kHz ou de 192 kHz 48 R duction de la distorsion audio Si une distorsion audio a lieu lors de l utilisation des prises d entr e audio analogique mettre l att nuateur sur Active e Par d faut cette fonction est r gl e sur D sactiv 1 Appuyer sur SETUP 2 Appuyer r p tition sur A V pour s lectionner Att nua puis appuyer sur OK 3 Appuyer sur A V afin de s lectionner LIGNE ou LIGNE2 4 Appuyer sur 4 gt pour s lectionner Activ
52. e but for illustration only In certain instances some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or the exclusion of implied warranties so the above limitations and exclusions may not be applicable This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory WARRANTY SERVICE For product operation repairs and information assistance please visit our Support page on www panasonic ca english support IF YOU SHIP THE PRODUCT TO A SERVICENTRE Carefully pack and send prepaid adequately insured and preferably in the original carton Include details of the defect claimed and proof of date of original purchase 31 31 English 4 Nous vous remercions d avoir arr t votre choix sur cet appareil ll est recommand de lire attentivement ce manuel avant d utiliser l appareil et de le conserver pour consultation ult rieure Pour toute assistance suppl mentaire visiter www panasonic ca french support E Caract ristiques de cet appareil Cet appareil offre les caract ristiques suivantes Technics Digital Link Technics a minimis la longueur du chemin parcouru par le signal en incluant le lecteur audio r seau et le s lecteur d entr e qui prennent en charge des signaux tr s faibles dans le m me ch ssis et a r duit l entr e de bruit dans les signaux faibles autant que possible en utilisant
53. e fonction sera galement r gl e sur Activ Pour modifier le param tre r glez Veille r seau sur D sactiv gt 21 Mise en veille r seau Cet appareil peut se mettre automatiquement en marche partir du mode veille lorsque cet appareil est s lectionn comme le lecteur AirPlay DLNA e Par d faut cette fonction est r gl e sur D sactiv 1 Appuyer sur SETUP 2 Appuyer r p tition sur A V pour s lectionner Veille r seau puis appuyer sur OK 3 Appuyer sur A V pour s lectionner Activ puis appuyer sur OK LJ e Si la fonction est r gl e sur Activ la consommation d nergie en mode veille augmente Langue S lectionner anglais ou fran ais pour l affichage e Par d faut cette fonction est r gl e sur English 1 Appuyer sur SETUP 2 Appuyer r p tition sur A V pour s lectionner Langue puis appuyer sur OK 3 Appuyer sur A V pour s lectionner English Fran ais puis appuyer sur OK 49 21 Fran ais Canada 22 Mises a jour du micrologiciel Panasonic diffuse l occasion des mises jour du micrologiciel de cet appareil qui peuvent ajouter des fonctionnalit s ou am liorer celles en place Ces mises jour sont mises votre disposition sans frais Pr paratifs e Connectez cet appareil au r seau 14 Assurez vous que le r seau sans fil est reli Internet
54. e lecteur graveur de carte USB e Cet appareil ne peut pas enregistrer de la musique sur un dispositif USB e Pour en savoir plus sur le format pris en charge consulter Format du fichier gt 28 Ecoute de musique pr sente sur un dispositif USB 1 Brancher un dispositif USB l appareil ex P Cet appareil avant L appareil USB MUONI 2 Appuyer sur USB 3 Appuyer sur A V pour s lectionner une rubrique puis appuyer sur OK e S il y a d autres rubriques recommencer l tape plus haut Op rations sur la t l commande Arr t Appuyer sur W Appuyer sur b HH Pause e Appuyer de nouveau pour poursuivre la lecture Appuyer sur lt 4 ou PP pour sauter une plage e Si vous appuyez sur l une de ces touches pendant la pause la lecture recommencera Saut Durant la lecture maintenir enfonc e la touche lt q ou gt gt e est possible que cette op ration ne soit pas disponible pour certains formats Recherche 45 17 Fran ais Canada 18 E Lecture en reprise al atoire Appuyer sur RND chaque fois que vous appuyez sur la touche Toutes les pistes d un m me fichier sont Activ r p t es de fa on al atoire e ALEAT s affiche Desactive Desactive le mode de reprise aleatoire E Lecture en reprise Appuyer sur
55. eau de sortie BALANCED UNBALANCED couteurs R ponse en fr quence BALANCED UNBALANCED THD N BALANCED UNBALANCED Signal bruit BALANCED UNBALANCED Gamme dynamique USB 2 0 grande vitesse USB 2 0 grande vitesse USD classe audio 2 0 mode asynchrone Mode Natif ASIO mode DoP Lecture de DSD64 DSD128 2 Ca 2 3 Vrms 2 3 Vrms 180 mW 180 mW 32 Q 2 Hz 90 kHz 3 dB 2 Hz 90 kHz 3 dB 0 0008 1 kHz 0 dB 0 0008 1 kHz 0 dB 118 dB IHF A 115 dB IHF A BALANCED 118 dB IHF A UNBALANCED 115 dB IHF A TT e Sp cifications sous r serve de modifications e Le poids et les dimensions sont approximatifs Lorsque l iPhone iPad iPod n est pas en chargement 55 27 Fran ais Canada E Format du fichier Cet appareil prend en charge les formats de fichiers suivants e Cet appareil ne prend pas en charge la lecture de fichiers musicaux interdits de copie e La lecture de tous les fichiers dans des formats pris en charge par cet appareil n est pas garantie e La lecture d un fichier dans un format qui n est pas pris en charge par cet appareil peut entra ner un son saccad ou du bruit Dans ce cas v rifier si l appareil prend en charge le format de fichier e Cet appareil ne prend pas en charge la lecture d bit binaire variable VBR e est possible que certains des dispositifs connect s serveurs soient capables de convertir les fichiers dans des formats non pris en
56. eech impaired TTY 1 877 833 8855 D Ne As of October 2014 User memo DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER 30 Limited Warranty ONLY FOR CANADA Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario LAW 2T3 TECHNICS PRODUCT LIMITED WARRANTY Panasonic Canada Inc warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to at its option either a repair your product with new or refurbished parts b replace it with a new or a refurbished equivalent value product or c refund your purchase price The decision to repair replace or refund will be made by Panasonic Canada Inc Technics Stereo Power Amp Technics Network Audio Control Player 5 five years parts and labour Technics Speaker System This warranty is given only to the original purchaser or the person for whom it was purchased as a gift of a Technics brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada which product was not sold as is and which product was delivered to you in new condition in the original packaging IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED LIMITA
57. emarks or trademarks of Microsoft Corporation in the United States and or other countries Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries This product is protected by certain intellectual property rights of Microsoft Corporation and third parties Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary and third parties FLAC Decoder Copyright C 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 Josh Coalson Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution Neither the name of the Xiph org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRA
58. er memory or recorded content The items listed are not exclusive but for illustration only ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If a problem with this product develops during or after the warranty period you may contact your dealer or Service Center If the problem is not handled to your satisfaction then write to Consumer Affairs Department Panasonic Corporation of North America 661 Independence Pkwy Chesapeake VA 23320 PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY a Shop Id Accessories for all your Technics gear Go to www panasonic com accessories Get everything you need to get the most out of your Technics products Accessories amp Parts for your Camera Phone A V products TV Computers amp Networking Personal Care Home Appliances Headphones Batteries Backup Chargers amp more Customer Services Directory For Product Information Operating Assistance Parts Owner s Manuals Dealer and Service info go to www panasonic com support For the hearing or sp
59. er supply cord 2 Connect this unit and a PC etc e g This unit rear 3 Connect the AC power supply cord to this unit and press the unit on off button to the m I position 12 4 Press PC 5 Operate the PC etc for playback aog 19 English 20 Sound adjustment The following sound effects can be added to the audio output Listening to more natural sounding audio Re master Re mastering expands the playback band and achieves a higher bit depth to reproduce natural and expansive sound close to original music e The factory default is Off Press RE MASTER to select On Off Direct mode This unit can transmit input signals without passing them through its digital signal processor DSP via the shortest possible path This enables faithful and high quality reproduction of original sound e The factory default is Off Press DIRECT to select On Off Setting the sampling frequency You can set an upper limit on the output sampling frequency range Please note that the range that can be processed differs depending on the amplifier or D A converter For details refer to the operating instructions of the connected device e The factory default is 32kHz 192kHz Preparation e Set Digital Output to On 1 Press SETUP 2 Press 4 V repeatedly to select D Output fs and then press OK 3 Press A V to select an ite
60. evice and then reconnect it Alternatively turn the unit off and on again Slow operation of the USB flash drive Large file size or high memory USB flash drive takes longer time to read Cc The PC does not recognize this unit Check your operating environment gt 19 Restart the PC turn off and on this unit and then reconnect the USB cable e Use another USB port of the connected PC Install the dedicated driver if using a PC with Windows Cannot find music files stored on the PC e When you play back music files over a network those that are not registered to its network server are not displayed For details refer to the operating instructions for your server Remote control The remote control does not work properly e To avoid interference please do not put any objects in front of signal sensor gt 7 e Change the remote control code if other products react to this remote control gt 22 Messages The following messages or service numbers may appear on the unit s display AUTO OFF e The unit has been left unused for about 20 minutes and will enter standby mode within a minute Press any button to cancel it Checking Connection The unit is checking the connected iPhone iPad iPod or a USB device Download Error e The firmware download has failed Press any button to exit Please try again later e The server cannot be found Press any button to exit Ma
61. exposed to rain or moisture does not operate normally or has been dropped NOORWN WARNING Unit e To reduce the risk of fire electric shock or product damage Do not expose this unit to rain moisture dripping or splashing Do not place objects filled with liquids such as vases on this unit Use only the recommended accessories Do not remove covers Do not repair this unit by yourself Refer servicing to qualified service personnel Do not place heavy items on this unit AC power supply cord eo The power plug is the disconnecting device Install this unit so that the power plug can be unplugged from the socket outlet immediately CAUTION Unit Do not place sources of naked flames such as lighted candles on this unit Placement e To reduce the risk of fire electric shock or product damage Do not install or place this unit in a bookcase built in cabinet or in another confined space Ensure this unit is well ventilated Do not obstruct this unit s ventilation openings with newspapers tablecloths curtains and similar items e Do not lift or carry this unit by holding any of its knobs Doing so may cause this unit to fall resulting in personal injury or malfunction of this unit Battery e Danger of explosion if battery is incorrectly replaced Replace only with the type recommended by the manufacturer e Mishandling of batteries can cause electrolyte leakage and may
62. from the outlet before maintenance Clean this unit with a soft cloth e When dirt is heavy wring a wet cloth tightly to wipe the dirt and then wipe it with a soft cloth e Do not use solvents including benzine thinner alcohol kitchen detergent a chemical wiper etc This might cause the exterior case to be deformed or the coating to come off 6 Control reference guide This unit E Front us O 009 Unit on off button MOFF m l Use this button to turn the unit on and off m off off The unit is off m I on The unit is on e The unit is still using a small amount of power in off mode Off mode uses less power gt 26 2 Port for iPhone iPad iPod and USB devices gt 16 17 Power indicator The color of the indicator changes according to the status of this unit Blue The unit is on Red The unit is in standby mode Remote control signal sensor Distance Within approx 7 m 23 ft directly in front Angle Approx 30 left and right Volume knob Adjust the volume of the headphones or the SE R1 gt 13 e It is not possible to adjust the volume of devices connected to the analog or digital audio output terminals e The speed at which the volume is adjusted varies depending on how fast you turn the knob Display Basic control buttons gt Play Pause RETURN Return to the previous display e Press and hold RETURN on the unit to
63. ge currents In addition Technics s newly developed signal transmission interface minimizes the degradation of time accuracy and amplitude accuracy that occurs when signals are transmitted between the network control player and the power amplifier achieving an ideal amplifier configuration Digital Noise Isolation Architecture Since most digital content storage media are intended for use with PCs they are not designed with consideration for low noise which is critical to pure audio reproduction To overcome this challenge this unit employs a thorough measure against jitter and outstanding noise blocking technology for each of its interfaces delivering clear sound Separated Analog Digital Power Supply A dedicated low noise R core transformer with excellent regulation characteristics is provided individually for analog and for digital circuit achieving high quality sound reproduction E Recommended devices We recommend using Technics devices optional for superior audio quality Product name Model number Stereo Power Amplifier SE R1 Speaker System SB R1 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit Follow the safety instructions on the unit and the applicable safety instructions listed below Keep these operating instructions handy for future reference Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use th
64. he compatible device to the network and then connect to this unit again Set Network Standby to Off gt 21 turn this unit off and on and then connect to this unit again Playback does not start The sound is interrupted eo Simultaneous use with other 2 4 GHz devices such as microwaves cordless telephones etc may result in connection interruptions Increase the distance between the wireless router and these devices e If several wireless devices are simultaneously using the same wireless network as this unit try turning off the other devices or reducing their wireless network usage e f the playback stops check the playback status on the device 24 iPhone iPad iPod Cannot operate e Select USB as the input source e Check that the iPhone iPad iPod is connected properly e Connect the iPhone iPad iPod again or try to restart the iPhone iPad iPod e The battery of the iPhone iPad iPod is depleted Charge the iPhone iPad iPod and then operate again iPhone iPad iPod does not charge Make sure the unit is turned on when you start charging When charging an iPhone iPad iPod whose battery is depleted do not turn this unit to standby mode until the iPhone iPad iPod becomes operational The USB drive or its contents cannot be read e The USB drive format or its contents is are not compatible with the unit gt gt 28 No response when gt HJ is pressed e Disconnect the USB d
65. identical in shape Be careful not to mistakenly connect the LAN cable connected to another device such as a broadband router to the system terminal e Inserting any cable other than a LAN cable in the LAN port can damage the unit e f you try to change the network settings immediately after turning on this unit it may take some time until the network setup screen is displayed Playing back music files on the DLNA server You can share music files stored in the DLNA Certified media server PC smartphone etc connected to your home network and enjoy the contents with this unit e About supported format refer to File format gt 28 Preparation e Complete the network settings gt 14 e Connect the device to be used to the same network as this unit e Add the contents and folder to the libraries of the Windows Media player 11 or 12 or a smartphone etc Playlist of Windows Media player can play back only the contents that are stored in the libraries To use Windows Media Player for streaming you need to configure it in advance Playing back content stored on the DLNA server by controlling it from this unit You can play back music stored on the DLNA server on this unit DMP Digital Media Player by controlling the DLNA server with this unit 1 Press LAN e The server selection screen will be displayed 2 Press A W to select a DLNA server on the network and then press OK e The folde
66. is apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been
67. ke sure that the network is connected to the Internet Empty e The selected folder is empty Move tracks into the folder and retry the operation e The server is not found on the network Check to see if the server is connected to the same network as this unit and retry the connection to this unit gt 15 Error e Incorrect operation is performed Read the instructions and try again FOO 1 stands for a number There is a problem with this unit Is the volume extremely high If so lower the volume Is this unit placed in an extremely hot place If so move this unit to a cooler place and wait a few moments and then try to turn it on again If the problem persists write down the displayed number disconnect the AC power supply cord and consult your dealer No Network Connection This unit is not connected to the network Check the network connection gt 14 Not Conditional e The function you have tried to use is not available with the current settings Check the steps and settings Over Flow e The audio from the analog audio input terminal in use is distorted Select Attenuator and change the setting for the analog audio input terminal in use to On 20 PGM Full e The number of programed tracks is more than 24 Please Wait e This is displayed for example when this unit is turned on off For up to 1 minute
68. lacer d objets devant le capteur de signal de t l commande gt 7 e Modifier le code de la t l commande lorsque d autres appareils r pondent a cette t l commande gt 22 Messages Les messages ou num ros de service suivants peuvent appara tre sur l afficheur de l appareil H M AUTO e L appareil n a pas t utilis pendant environ 20 minutes et passera en mode veille dans une minute Appuyer sur une touche pour annuler V rif connexion e L appareil est en train de v rifier l iPhone iPad iPod ou un dispositif USB branch s Erreur t l ch Le t l chargement du logiciel a chou Appuyer sur n importe quelle touche pour sortir R essayer un autre moment e Le serveur est introuvable Appuyer sur n importe quelle touche pour quitter Assurez vous que le r seau sans fil est reli Internet Vide e Le dossier s lectionn est vide D placez des pistes dans le dossier et retentez l op ration e Le serveur est introuvable sur le r seau V rifiez que le serveur est bien connect au m me r seau que cet appareil puis r essayez d tablir la connexion cet appareil gt 15 Erreur e L op ration effectu e tait la mauvaise Se reporter aux instructions puis recommencer FOO 0 repr sente un chiffre el y a un probl me avec cet appareil Le volume est il extr mement lev Si c est le cas baissez le v
69. m and then press OK e You can select a sampling frequency of 96 kHz or 192 kHz 20 Minimizing audio distortion If audio distortion occurs when using the analog audio input terminals set the attenuator to On e The factory default is Off 1 Press SETUP 2 Press A V repeatedly to select Attenuator and then press OK 3 Press A V to select LINE1 or LINE2 4 Press lt gt to select On and then press OK Disabling audio output Disabling the audio output of unused terminals minimizes noise and allows playback in higher audio quality e The factory default is On 1 Press SETUP To disable the digital audio output Press A V repeatedly to select Digital Output and then press OK To disable the analog audio output Press A V repeatedly to select Analog Output and then press OK To disable the system terminal output SE R1 Press A V repeatedly to select Digital Link and then press OK 2 Press A V to select Off and then press OK e To enable the output again select On LJ e Depending on the music source that you play back the applied setting may be less effective e Depending on the music source that you play back it may not be possible to achieve the desired audio quality and sound field effect In such cases turn off this function Both Re master and Direct mode cannot be set to O
70. mande des fonctions de lecture de base SLEEP R glage de la minuterie sommeil gt 21 Preparatifs e Mettre tous les appareils hors tension et lire leur manuel d utilisation e Ne pas brancher le cordon d alimentation secteur avant d avoir effectu tous les autres raccordements e Ins rer les fiches des cables brancher jusqu au bout e Ne pas tordre les c bles Connexion de contr le du syst me un SE R1 e Vous pouvez envoyer des signaux audio num riques partir de cet appareil et lire de la musique e Vous pouvez lier automatiquement cet appareil avec le SE R1 et les commander facilement l aide de la t l commande gt 23 Cet appareil arri re B CR ro sut Technics Digital Link IN TO SE RI Technics Digital Link OUT C ble pour contr le de syst me non fourni C ble pour contr le de syst me non fourni LI e Utilisez des c bles r seau locaux de cat gorie 7 ou sup rieure STP lors de leur connexion des appareils p riph riques e Nous conseillons d utiliser des c bles d une longueur de 3 m 9 9 pi ou moins e La prise du syst me et le port r seau local sont de forme identique Faites attention ne pas brancher par m garde l un des cables du contr le de syst me branch la prise du syst me du SE R1 au port r seau local e Ne branchez pas
71. ment y compris sa fiche 11 Nutiliser que les accessoires ou p riph riques recommand s par le fabricant 12 N utiliser l appareil qu avec un chariot meuble tr pied support ou table recommand par le fabricant ou vendu avec l appareil Lors de l utilisation d un chariot le d placer avec le plus grand soin afin d viter tout dommage 13 D brancher cet appareil lors d un orage ou en cas de non utilisation prolong e 14 Confier l appareil un technicien qualifi pour toute r paration cordon d alimentation ou fiche endommag liquide renvers ou objet tomb dans l appareil exposition la pluie ou une humidit excessive mauvais fonctionnement ou chappement de l appareil LAIT AVERTISSEMENT Appareil Pour r duire les risques d incendie de choc lectrique ou de dommages l appareil N exposez pas cet appareil la pluie l humidit l gouttement ou aux claboussements Ne placez sur l appareil aucun objet rempli de liquide comme par exemple des vases Utilisez exclusivement les accessoires recommand s Ne retirez pas les couvercles Toute r paration doit tre faite par un personnel qualifi et non par l usager Ne posez pas d objets lourds sur cet appareil Cordon d alimentation c a e La fiche d alimentation permet de d connecter l appareil L appareil doit tre install proximit d une prise secteur facile d acc s ATTENTION Appa
72. mpatibilit d pend de la version du logiciel Installez le tout dernier logiciel sur votre iPhone iPad iPod avant de l utiliser avec cette unit Panasonic n assume aucune responsabilit pour la perte de donn es et ou d informations e Ne branchez pas les mod les suivants iPod classic iPod 4 affichage couleur et 5 vid o g n rations iPod nano 1 generation Certains incidents impr vus pourraient se produire e Les r sultats de cet action peuvent varier en fonction des mod les iPhone iPad iPod ou de la version de I iOS Connexion d un iPhone iPad iPod Lors de la connexion d un iPhone iPad iPod utiliser le cable USB d di non fourni ex OFF m iPhone etc Cet appareil avant Cable USB non fourni 44 Arret Appuyer sur W Appuyer sur P 11 Pause e Appuyer de nouveau pour poursuivre la lecture oan Appuyer sur lt 4 ou gt P pour sauter une plage Recherche Durant la lecture maintenir enfonc e la touche lt lt ou gt gt IT e sera peut tre n cessaire de s lectionner l album l artiste etc sur l iPhone iPad iPod e Selon les mod les d iPhone iPad iPod les actions effectu es avec la t l commande pourraient tre impossibles Chargement d un iPhone iPad iPod Lorsque l appareil est en marche le chargement commence lorsqu un iPhone iPad iPod est branch a cet appa
73. n e When Digital Output Analog Output and Digital Link are set to Off no sound will be output e When a headphone plug is connected even if Analog Output is set to Off it is not possible to disable the analog audio output e t may take some time to output audio when you have adjusted the audio quality Others Sleep timer The sleep timer can switch the unit to standby mode after a set time Press SLEEP Each time you press the button 30 minutes 60 minutes gt 90 minutes gt 120 minutes 1 Off lt L e You can also set the sleep timer by selecting SLEEP using the menu screen Auto off function This unit is designed to conserve its power consumption and save energy The unit will turn to standby mode automatically if there is no sound and it is not being used for approximately 20 minutes e The factory default is On To cancel this function 1 Press SETUP 2 Press A V repeatedly to select AUTO OFF and then press OK 3 Press A V to select Off and then press OK LEI e The auto off function works unless you turn it off even if you turn off and on this unit e f Network Standby is set to On this function will also be set to On To change the setting set Network Standby to Off gt 21 Network standby This unit can turn on automatically from st
74. n dispositif USB 17 Entretien de l appareil 6 Avec UNDP ett icine taste cen 19 Guide de r f rence 7 R glage du rendu sonore 2 cceceseceeceeeeeeeeeeeeeeeeeeeeees 20 Pr paratifs iia 9 AUTOS eroian atai anaa aiaiai daada aap danara aaan 21 Fonctionnement de base 13 Guide de d pannage 2 ccceceeeeseeeeeeeeeeeeeeeeeeeeeeees 23 R glages r seau 14 Sp cifications sn 26 Lecture de fichiers de musique sur le serveur DLNA 15 Certificat de garantie limit e 30 Utilisation de l iPhone iPad iPod 2 s 2mmmmse 16 propos des illustrations dans le pr sent manuel e Les pages consulter sont indiqu es par OO e Les illustrations peuvent tre diff rentes de l apparence r elle de l appareil e Sauf indication contraire les op rations d crites doivent se faire au moyen de la t l commande Accessoires 1 cordon d alimentation 1 t l commande 2 piles pour la t l commande K2CB2YY00107 N2QAYA000095 SEULEMENT POUR LE CANADA La feuille d autocollants en fran ais ci incluse correspond aux noms des touches sur l appareil IT e Les num ros de produit fournis dans ce manuel de l utilisateur sont corrects compter de d cembre 2014 Ces num ros pe
75. n et l emploi sous formes source et binaire avec ou sans modification sont autoris s condition que La redistribution du code source retienne l avis de copyright ci dessus la liste des conditions et l avis de non responsabilit suivant Les redistributions sous forme binaire reproduisent l avis de copyright ci dessus la liste des conditions et l avis de non responsabilit suivant dans la documentation et ou les mat riaux qui accompagnent la distribution Nile nom de Xiph org Foundation ni les noms de ses collaborateurs ne doivent en aucun cas tre utilis s pour endosser ou promouvoir des produits d riv s de ce logiciel sans permission pr alable crite CE LOGICIEL EST FOURNI TEL QUEL PAR LES D TENTEURS DE DROITS D AUTEUR ET LEURS COLLABORATEURS ET TOUTE GARANTIE EXPRESSE OU IMPLICITE Y COMPRIS MAIS NON LIMIT E AUX GARANTIES IMPLICITES DE QUALIT MARCHANDE ET D APTITUDE POUR UN OBJECTIF DONN EST REJETEE EN AUCUN CAS LA FONDATION OU SES COLLABORATEURS NE SERONT RESPONSABLES DES D G TS DIRECTS INDIRECTS INCIDENTS SP CIAUX EXEMPLAIRES OU CONS CUTIFS Y COMPRIS MAIS NON LIMIT LA FOURNITURE DE BIENS OU DE SERVICES DE REMPLACEMENT DE PERTE D UTILISATION DE DONNEES OU DE PROFITS OU D INTERRUPTION D AFFAIRES QUELLE QU EN SOIT LA CAUSE ET QUELLE QUE SOIT LA TH ORIE DE RESPONSABILITE QU ELLE D COULE D UN CONTRAT DE RESPONSABILIT STRICTE OU D ACTE D LICTUEL Y COMPRIS NEGLIGENCE OU AUTRE
76. nement du SE R1 consulter galement son manuel d utilisation 40 Fonctionnement de base Preparatifs e Pr parer la musique que vous souhaitez lire e Mettre en marche le dispositif branch amplificateur etc et baisser son volume 1 Appuyer sur la touche en marche hors marche de l appareil pour la mettre sur la position 1 e Le voyant d alimentation s allume en bleu 2 Appuyer sur toute touche de source entrante gt 8 Connecte cet appareil un r seau et LAN lit de la musique sur ce r seau gt 15 AES COAK Lit de la musigue depuis des dispositifs de sortie audio numerigue OPT e Appuyer plusieurs fois sur COAX afin de s lectionner COAX1 COAX2 COAX3 Lit de la musique enregistr e sur un USB dispositif USB ou un iPhone iPad iPod gt 16 17 18 Lit de la musique enregistr e sur un He PC etc gt 19 Lit de la musique depuis des LINE1 LINE2 dispositifs de sortie audio analogique 3 Appuyer sur A V pour s lectionner une rubrique puis appuyer sur OK e S il y a d autres rubriques recommencer cette tape 4 Lancer la lecture E Utilisation du bouton multi contr le 1 Appuyer et maintenir une pression sur RETURN de l appareil et pour afficher le menu ACCUEIL 2 Tourner le bouton multi contr le dans le sens des aiguilles d une montre ou dans le sens contraire afin de s lectionner une source entrante puis a
77. nexion r seau et ses param trages gt 14 La connexion l appareil est impossible e S assurer que la fonction de multidiffusion du routeur sans fil est activ e e S assurer que le dispositif et l appareil sont connect s au m me r seau gt 14 e Reconnecter le dispositif compatible au r seau puis vous connecter nouveau cet appareil e Mettre Veille r seau sur D sactiv gt 21 mettre cet appareil hors marche puis en marche puis vous connecter nouveau cet appareil La lecture ne s amorce pas Le son est interrompu e L utilisation simultan e avec des dispositifs fonctionnant dans la bande des 2 4 GHz tels que les fours micro ondes combin s sans fil etc peut interrompre la connectivit loigner le routeur sans fil de ces dispositifs Si plusieurs dispositifs sans fil utilisent simultan ment le m me r seau sans fil que l appareil essayer de mettre ces autres dispositifs hors marche ou de restreindre leur utilisation du r seau sans fil e Si la lecture s arr te consulter l tat de la lecture l cran du dispositif 52 iPhone iPad iPod Ne peut pas fonctionner e S lectionner USB comme source entrante e V rifier que l iPhone iPad iPod est bien connect e Connecter de nouveau l iPhone iPad iPod ou essayer de le red marrer e La batterie de l iPhone iPad iPod est plat Recharger la batterie L iPhone iPad iPod ne se recharge pa
78. olume Cet appareil est il plac dans un endroit extr mement chaud Si c est le cas d placez cet appareil vers un endroit moins chaud et attendez un moment puis essayez nouveau de le mettre en marche Si le probl me persiste notez le num ro affich d branchez le cordon d alimentation secteur et consultez votre vendeur Pas connex r seau e L appareil n est pas connect au r seau V rifiez la connexion r seau gt 14 Non possible e La fonction que vous avez essay d utiliser n est pas disponible avec les param tres actuels V rifiez les tapes et les param tres D passem e L audio de la prise d entr e audio analogique utilis e est d form S lectionnez Att nua et changez le param tre de la prise d entr e audio analogique utilis e pour Activ 20 Prog comp e Le nombre de pistes programm es est sup rieur 24 Patienter e Ceci s affiche par exemple lorsque cet appareil est mis en marche hors marche Jusqu 1 minute et 30 secondes T l com O O repr sente un chiffre e La t l commande et l appareil n utilisent pas les m mes codes de commande Modifier le code sur la t l commande Lorsque T l com 1 s affiche appuyer sur OK et 1 et maintenir enfonc pendant au moins 4 secondes Lorsque T l com 2 s affiche appuyer sur OK et 2 et maintenir enfonc
79. ompatibles avec DMC se reporter au manuel d utilisation des p riph riques ou des logiciels concern s Ley e Vous ne pouvez pas utiliser la lecture en reprise al atoire en combinaison avec d autres modes de lecture e Lorsque vous contr lez DMC la lecture d autres sources audio s arr tera et la lecture de DLNA aura la priorit e Selon le contenu et l quipement connect il est possible que les op rations ou la lecture soient impossibles effectuer 7 repr sente un chiffre unique a chaque appareil 2 Le nom du p riph rique peut tre modifi partir de Pour effectuer des r glages de r seau gt 14 43 15 Fran ais Canada Utilisation de l iPhone iPad iPod Brancher votre iPhone iPad iPod et vous pourrez lire de la musique enregistr e sur votre iPhone iPad iPod ou recharger votre iPhone iPad iPod E Mod les iPhone iPad iPod compatibles iPhone 6 Plus iPhone 6 iPhone 5s iPhone 5c iPhone 5 iPhone 4s iPhone 4 iPhone 3GS iPhone 3G iPad Air iPad 3 et 4 g n rations iPad 2 iPad iPad mini 2 iPad mini Lecteur iPod touch de la 2 a la 5 g n ration Lecteur iPod nano de la 3 a la 7 generation Ecoute de musique pr sente sur un iPhone iPad iPod 1 Brancher l iPhone iPad iPod l appareil 2 Appuyer sur USB 3 Lancer la lecture Op rations sur la t l commande compter de novembre 2014 LI e La co
80. on simultan e de cet appareil et du SE R1 sur marche veille e Si vous orientez la t l commande vers cet appareil et que vous appuyez sur lorsque cet appareil et le SE R1 sont en mode veille cet appareil et le SE R1 seront mis en marche simultan ment e Si vous orientez la t l commande vers cet appareil et que vous appuyez sur lorsque cet appareil et le SE R1 sont en marche cet appareil et le SE R1 seront mis en veille simultan ment E Mesure des caract ristiques de l amplificateur et correction de son mission Vous pouvez contr ler l aide de la t l commande de cet appareil M R glage des graves des m diums des aigus Vous pouvez r gler la tonalit du SE R1 avec cet appareil Chaque plage de tonalit s graves m diums aigus peut tre r gl e 1 Appuyer sur SETUP 2 Appuyer r p tition sur A V pour s lectionner Com tonalit puis appuyer sur OK 3 Appuyer sur 4 W pour s lectionner Active reglage puis appuyer sur OK 4 Appuyer sur A W afin de s lectionner GRAVES MEDIUM ou AIGUS 5 Appuyer sur lt gt pour r gler le niveau puis appuyez sur OK e Chaque niveau peut tre r gl entre 10 et 10 LIT e Pour en savoir plus sur le fonctionnement du SE R1 consulter galement son manuel d utilisation Guide de d pannage Avant de demander de l aide proc dez aux v rifications suivantes Si vous n tes pas s r
81. onsumption in standby mode When Network Standby is off When Network Standby is on Power consumption in off mode Dimensions WxHxD Mass Weight Operating temperature range Operating humidity range M TERMINALS SECTION Analog input LINE input x2 Digital input AES EBU digital input Coaxial digital input x3 Optical digital input USB Front USB Support memory capacity Maximum number of folders albums Maximum number of files songs File system USB port power PC Rear USB Analog output BALANCED UNBALANCED Digital output Technics Digital Link AES EBU digital output Coaxial digital output Optical digital output Headphones jack Ethernet interface LAN 26 AC 120 V 60 Hz 60 W Approx 0 2 W Approx 5 0 W Approx 0 2 W 480 mmx 120 mmx391 mm 18 7 8 lt 4 23 32 15 13 32 Approx 17 kg 37 5 lbs 0 C to 40 C 32 F to 104 F 35 Yo to 80 Yo RH no condensation Pin jack 3 pin XLR Pin jack Optical terminal Type A connector 2 TB max 800 8000 FAT16 FAT32 DC OUT 5 V 2 1 A max Type B connector 3 pin XLR Pin jack 3 pin XLR Pin jack Optical terminal Stereo 26 3 mm 1 4 10 Base T 100 Base TX E FORMAT SECTION USB A USB Standard USB Mass Storage class PC USB B USB Standard USB Audio Class specification DSD control mode E ANALOG OUTPUT SECTION Channel Output level BALANCED UNBALANCED Headphone Frequency response BALA
82. ou PP pour sauter une plage e Si vous appuyez sur l une de ces touches pendant la pause la lecture recommencera Saut Durant la lecture maintenir enfonc e la Recherche touche 44 ou gt gt WE Lecture en reprise al atoire Appuyer sur RND chaque fois que vous appuyez sur la touche Toutes les pistes d un m me fichier sont Activ r p t es de fa on al atoire e AL AT s affiche D sactiv D sactive le mode de reprise al atoire E Lecture en reprise Appuyer sur chaque fois que vous appuyez sur la touche 5 Lecture de la piste s lectionn e seulement FRU e 1 gt s affiche Toutes les pistes d un m me fichier sont Tous r p t es e gt s affiche D sactiv D sactivation du mode de reprise Lecture du contenu enregistr sur le serveur DLNA en le contr lant depuis un DMC En contr lant un dispositif compatible avec DMC Contr leur de m dia num rique vous pouvez lire de la musique enregistr e sur le serveur DLNA de cet appareil DMR Rendu de m dia num rique 1 Appuyer sur la touche en marche hors marche de l appareil pour la mettre sur la position 1 2 Utiliser le p riph rique compatible avec DMC et se connecter cet appareil e Le nom de dispositif de cet appareil s affichera en tant que Technics SU R1_ atc e Pour en savoir plus sur l utilisation des p riph riques c
83. ove For example if you are using Windows Media Player 11 not all music files on the PC are playable You can play back only those added to the library of Windows Media Player 11 28 28 Made for SiPod iPhone DiPad AirPlay Made for iPod Made for iPhone and Made for iPad mean that an electronic accessory has been designed to connect specifically to iPod iPhone or iPad respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod iPhone or iPad may affect wireless performance AirPlay iPad iPhone iPod iPod nano and iPod touch are trademarks of Apple Inc registered in the U S and other countries iPad Air and iPad mini are trademarks of Apple Inc Mac and OS X are trademarks of Apple Inc registered in the U S and other countries Android is a trademark of Google Inc DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or certification marks of the Digital Living Network Alliance Direct Stream Digital DSD and their logos are trademarks of Sony Corporation MPEG Layer 3 audio coding technology licensed from Fraunhofer IIS and Thomson Windows and Windows Vista are either registered trad
84. oyant d alimentation est teint Pour s lectionner la source HOME Affichage du menu ACCUEIL A V amp OK S lection OK MENU Pour acc der au menu gt 21 DIRECT Pour activer d sactiver le mode direct gt 20 LAPC Mesure des caract ristiques de Pamplificateur et correction de son mission gt 12 00000 MUTE Mise en sourdine du volume des couteurs ou du SE R1 gt 13 gt INPUT lt Pour s lectionner la source VOL Pour r gler le volume des couteurs ou du SE R1 gt 13 e n est pas possible de r gler le volume des dispositifs connect s aux prises de sortie audio analogique ou num rique Touches num riques etc e Pour s lectionner un num ro 2 chiffres Exemple 16 210 1 6 e Pour s lectionner un num ro 4 chiffres Exemple 1234 210 210 210 gt 1 gt 2 gt 3 gt 4 e CLEAR Pour supprimer la valeur saisie SETUP Affichage du menu de configuration gt 14 20 21 22 23 DIMMER R glage de la luminosit de l affichage etc gt 13 INFO Pour voir les informations du contenu Appuyer sur cette touche afin de faire afficher les noms de la piste de l artiste et de l album le type de fichier la fr quence d chantillonnage et d autres informations RETURN Retour l affichage pr c dent RE MASTER Pour activer d sactiver le rematri age gt 20 Touches de com
85. pour entrer dans l cran du menu appuyez et restez appuy E Arri re Prise de sortie audio analogique UNBALANCED gt 10 Prises d entr e audio analogique LINE1 LINE2 gt 10 Prise du syst me Technics Digital Link OUT gt 9 Plaque signal tique Le num ro du mod le est indiqu Prise de sortie audio analogique BALANCED gt 10 Prise de sortie audio num rique AES EBU gt 11 Prise de sortie audio num rique COAXIAL gt 11 Prise de sortie audio num rique OPTICAL gt 11 Prise de sortie audio num rique AES EBU gt 11 Prises d entr e audio num rique COAXIAL 1 COAXIAL2 COAXIAL3 gt 11 Prise d entr e audio num rique OPTICAL gt 11 Port LAN LAN gt 14 Prise d entr e audio num rique PC gt 19 Pour brancher a un PC etc Prise d alimentation c a AC IN gt 12 35 7 Frangais Canada 8 T l commande 86 00 066 TO DIMMER Ct LAN AES coax OPT usb Pc LINE1 LINE2 O Interrupteur d attente marche Appuyer sur cet interrupteur pour commuter l appareil du mode d attente au mode de marche et vice versa En mode d attente l appareil continue de consommer une petite quantit de courant e La t l commande ne fonctionne pas lorsque le v
86. ppuyer sur le bouton 3 Tourner le bouton multi contr le dans le sens des aiguilles d une montre ou dans le sens contraire afin de s lectionner un l ment puis appuyer sur le bouton 4 Lancer la lecture R glage du volume des couteurs ou du SE R1 Branchez cet appareil au SE R1 l aide de c bles pour le contr le du syst me gt 23 M R glage du volume Appuyer sur VOL e dB min de 99 0 dB 0 dB max e Lors du r glage du volume du SE R1 r gler le commutateur de s lection d entr e du SE R1 sur DIGITAL EH Mise en sourdine du son Appuyer sur MUTE e r x s affiche Appuyer de nouveau pour annuler Cl x est galement annul lorsque le volume est r gl ou lorsque l appareil est mis hors marche Luminosit de l affichage La luminosit de l affichage de cet appareil et du voyant d alimentation peut tre modifi e Appuyer r p tition sur DIMMER LIT e Lorsque l affichage est teint il ne s allumera que lorsque vous utilisez cet appareil Avant que l affichage ne s teigne nouveau Affichage teint s affichera pendant quelques secondes Contr le l aide de l appli d di e Technics Music App Si vous installez l appli d di e Technics Music App sur votre tablette t l phone intelligent vous pouvez contr ler cet appareil et le SE R1 l aide d un grand nombre de fonctions Pour plus de d tails consulter
87. r content selection screen will be displayed e Folders content may be displayed in different order from the order on the server depending on its specifications 3 Press 4 V to select an item and then press OK e f there are any other items repeat this step Operations on the remote control Stop Press W Press gt 1 Pause e Press again to restart play Press M lt or PPI to skip track Skip e If you press either of these buttons during pause playback will restart During play or pause press and hold Search lt lt or gt gt E Random repeat playback Press RND Each time you press the button All tracks in a folder are repeated On randomly e RND gt is displayed Off Turns off random repeat mode E Repeat playback Press Each time you press the button Only plays the selected track TRES 4 is displayed All All tracks in a folder are repeated e gt is displayed Off Turns off repeat mode Playing back content stored on the DLNA server by controlling it from a DMC By controlling a DMC Digital Media Controller compatible device you can play back music stored on the DLNA server on this unit DMR Digital Media Renderer 1 Press the unit on off button to the 1 position 2 Operate the DMC compatible device and connect to this unit e The device name of this unit will be di
88. r la musique telle qu elle a t con ue a l origine et lui permettre de ressentir Le choc motionnel qu il br le de conna tre En apportant ce v cu nous cherchons accompagner le d veloppement et le plaisir des nombreuses cultures musicales du monde Telle est notre philosophie Ici et maintenant alliant l amour de la musique et la grande exp rience musicale de l quipe Technics nous sommes pleinement d termin s construire une marque qui apporte le v cu musical motionnel aux fervents de la musique Director Directeur Michiko Ogawa Panasonic Corporation of North America Panasonic Canada Inc Two Riverfront Plaza Newark NJ 07102 5490 5770 Ambler Drive z Mississauga Ontario http www panasonic com LAW 273 www panasonic com Panasonic Corporation 2015 Printed in Japan SQT0504 prim au Japon ANION AN OTIT FOTTSEMO
89. reil e Le chargement n est pas possible lorsque cet appareil est hors marche e S assurer que l appareil est en marche lorsque vous lancez le chargement Lors du chargement d un iPhone iPad iPod dont la batterie est puis e ne pas mettre cet appareil en mode veille tant que l iPhone iPad iPod ne fonctionne pas nouveau e V rifier sur l iPhone iPad iPod que la batterie est enti rement recharg e Une fois qu il est enti rement recharge retirer l iPhone iPad iPod e Le chargement s arr te lorsque la batterie est enti rement recharg e La batterie s puisera naturellement Utilisation de AirPlay AirPlay fonctionne avec iPhone iPad et iPod touch version iOS 4 3 3 ou plus Mac avec OS X Mountain Lion ou plus et PC avec iTunes 10 2 2 ou plus coute de musique avec AirPlay Pr paratifs e Effectuer les r glages r seau gt 14 e Connecter le dispositif iOS ou PC au m me r seau que cet appareil 1 os device D marrer l application Music ou iPod PC D marrer iTunes 2 S lectionner Technics SU R1 partir de l ic ne AirPlay En e V rifier le r glage du volume avant de lancer l coute Si la fonction AirPlay est utilis e pour la premi re fois il est possible que le volume soit au niveau maximum 3 Lancer la lecture e L coute s amorce avec un l ger retard Op rations sur la t l commande Arr t Appuyer sur W Appuyer
90. reil e Ne placer aucune source de flamme nue telles des bougies allum es sur l appareil Emplacement Pour r duire les risques d incendie de choc lectrique ou de dommages l appareil Ne pas installer cet appareil dans une biblioth que une armoire ou tout autre espace confin S assurer que la ventilation de l appareil est ad quate Ne pas obstruer les events d a ration de l appareil avec des journaux des nappes des rideaux ou d autres objets similaires Ne soulevez pas ou ne transportez pas cet appareil en le prenant par ses commutateurs Cela pourrait faire tomber l appareil mener des blessures ou des anomalies de fonctionnement de cet appareil Pile e Danger d explosion si les piles ne sont pas remplac es correctement Les remplacer uniquement par le type recommand par le fabricant e Une mauvaise manipulation des piles peut causer une fuite de l lectrolyte et peut provoquer un incendie Retirer la pile si la t l commande ne doit pas tre utilis e pendant un long laps de temps Les ranger dans un endroit sombre et frais Ne pas chauffer ou exposer au feu Ne pas laisser la ou les piles dans un v hicule expos au soleil avec vitres et portes ferm es pendant une longue p riode de temps Ne pas d monter ou court circuiter Ne pas tenter de recharger les piles alcalines ou au mangan se Ne pas utiliser des piles dont l enveloppe a t retir e Ne pas
91. s e S assurer que l appareil est en marche lorsque vous lancez le chargement Lors du chargement d un iPhone iPad iPod dont la batterie est puis e ne pas mettre cet appareil en mode veille tant que l iPhone iPad iPod ne fonctionne pas nouveau L appareil USB ou son contenu ne peut pas tre lu e Le format de l appareil USB ou de son contenu n est pas compatible avec le syst me gt 28 Il ne se passe rien en appuyant sur gt H1 e D brancher le dispositif USB et le rebrancher Sinon mettre l appareil hors marche puis nouveau en marche L appareil USB fonctionne au ralenti e Les fichiers lourds et les appareils USB grande m moire prennent plus de temps tre lus Le PC ne reconna t pas cet appareil e V rifier que votre environnement d exploitation est adapt gt 19 Red marrer le PC mettre l appareil hors marche puis en marche puis rebrancher le cable USB e Utiliser un autre port USB du PC branch e Installer le pilote d di en cas d utilisation d un PC quip de Windows Impossible de trouver les fichiers musicaux stock s sur le PC e Lorsque vous lisez des fichiers musicaux sur un r seau ceux qui ne sont pas enregistr s sur le serveur du r seau ne s affichent pas Pour plus de d tails consulter les instructions de fonctionnement de votre serveur Telecommande La telecommande ne fonctionne pas adeguatement e Afin de pr venir le risque d interf rence ne pas p
92. s with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Declaration of Conformity Trade Name Technics Model No SU R1 Responsible Party Panasonic Corporation of North America Two Riverfront Plaza Newark NJ 07102 5490 Support Contact http Awww panasonic com contactinfo THE FOLLOWING APPLIES ONLY IN CANADA CAN ICES 3 B NMB 3 B Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union If you wish to discard this product please contact your local EE authorities or dealer and ask for the correct method of disposal English 6 Table of contents IMPORTANT SAFETY INSTRUCTIONS cceccesstneerees 5 ACCOSSOMGES ss nu anaandaa daakinii iania aa 6 Unit Care iseun naninuun anuanua srenn anaana aaea aa Kaa wA AU WWW KW 6 Control reference guide 7 Getting started 9 Basic operations s 2m2mmmamamamamamamuananzanazanu nenen nnna 13 Network settings 2 cccceceseeseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 14 Playing back music files on the DLNA server 15 Using iPhone iPad iPod 16 Using AMPA 17 Using USB device 17 Using PC etc kizaazaa kuwaka wauw
93. splayed as Technics SU R1_ he e For details on how to use DMC compatible devices refer to the operating instructions of the devices or the software LT e You cannot use random repeat playback in combination with other playback modes e When you operate DMC playback of other audio sources will stop and DLNA output will have priority e Depending on the contents and the connected equipment operations or playback may not be possible 1 stands for a digit that is unique to each set 2 The device name can be changed from To make network related settings gt 14 15 15 English Using iPhone iPad iPod Connect your iPhone iPad iPod and you can play back music stored on iPhone iPad iPod or charge iPhone iPad iPod E Compatible iPhone iPad iPod iPhone 6 Plus iPhone 6 iPhone 5s iPhone 5c iPhone 5 iPhone 4s iPhone 4 iPhone 3GS iPhone 3G iPad Air iPad 3rd and 4th generation iPad 2 iPad iPad mini 2 iPad mini iPod touch 2nd through 5th generation iPod nano 3rd through 7th generation as of November 2014 Ley e Compatibility depends on the software version Update your iPhone iPad iPod to the latest software before using it with this unit e Please be aware that Panasonic accepts no responsibility for the loss of data and or information e Do not connect the following models to the port iPod classic iPod 4th color display and 5
94. sur gt 11 Pause e Appuyer de nouveau pour poursuivre la lecture Sa Appuyer sur 64 ou gt gt pour sauter une plage TI e La lecture des autres sources audio est interrompue et le signal de la fonction AirPlay a la pr s ance e Avec certaines versions de iOS et de iTunes il pourrait ne pas tre possible de poursuivre l coute avec AirPlay si la source est modifi e ou que le contact est coup sur l appareil durant l coute avec AirPlay Le cas ch ant s lectionner un autre dispositif partir de l ic ne AirPlay de l application Music ou de iTunes puis s lectionner de nouveau les enceintes de cet appareil comme support d coute e La fonction AirPlay n a aucun effet lors de la lecture de vid os sur iTunes 4 _ repr sente un chiffre unique chaque appareil 2 Le nom du p riph rique peut tre modifi partir de Pour effectuer des r glages de r seau gt 14 Avec un dispositif USB Vous pouvez lire de la musique pr sente sur un dispositif USB e Cet appareil ne garantit pas la connexion avec tous les dispositifs USB e Les syst mes de fichiers FAT16 et FAT32 sont pris en charge e Cet appareil prend en charge le USB 2 0 pleine vitesse e est possible que certains dispositifs USB ne soient pas reconnus par cet appareil lorsqu ils sont branch s l aide des raccordements suivants un concentrateur USB un c ble d extension USB e n est pas possible d utiliser d
95. t au moins 4 secondes e Lorsque le code de la t l commande est modifi le nouveau code s affichera l cran pendant quelques secondes OK 1 R gler le code sur Mode 1 OK 2 R gler le code sur Mode 2 Modification du codage de caract res Vous pouvez modifier le codage de caract res des noms de pistes des noms d artistes et d autres informations lorsqu elles ne s affichent pas comme elles le devraient e Par d faut cette fonction est r gl e sur Type 1 HA 1 Appuyer sur SETUP 2 Appuyer r p tition sur A V pour s lectionner Caract Asie Est puis appuyer sur OK 3 Appuyer sur A V pour s lectionner Type BA Type 2 fai k Y puis appuyer sur OK La priorit est donn e au Type ER eee La priorit est donn e au chinois Type 2 TEZ Simpifie Utilisation de la fonction de controle du systeme Vous pouvez lier automatiquement cet appareil avec le SE R1 et les commander facilement l aide de la t l commande Pr paratifs Branchez cet appareil au SE R1 l aide de c bles pour le contr le du syst me 9 R glez le bouton de s lection d entr e du SE R1 sur DIGITAL Appuyez sur la touche en marche hors marche de cet appareil et mettez le SE R1 sur la position 1 2 Si Digital Link est r gl sur D sactiv changez le param tre pour Activ E Commutati
96. te umber of quantization bits MP3 mp3 32 44 1 48 kHz 16 kbps to 320 kbps AAC m4a aac 32 44 1 48 88 2 96 kHz 16 kbps to 320 kbps WMA wma 32 44 1 48 kHz 16 kbps to 320 kbps WAV wav 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bit FLAC flac 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bit AIFF aiff 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bit ALAC m4a 32 44 1 48 88 2 96 kHz 16 24 bit DSD dff dsf 2 8224 5 6448 MHz PC USB B A Bit rate File format Extension Sampling frequency Number of quantization bits LPCM 32 44 1 48 88 2 96 176 4 192 352 8 384 kHz 16 24 32 bit DSD dff dsf 2 8224 5 6448 MHz LAN DLNA 2 File format Extension Sampling frequency Number Ka bits MP3 mp3 32 44 1 48 kHz 16 kbps to 320 kbps AAC m4a aac 32 44 1 48 88 2 96 kHz 16 kbps to 320 kbps WMA wma 32 44 1 48 kHz 16 kbps to 320 kbps WAV wav 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bit FLAC flac 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bit AIFF aiff 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bit ALAC m4a 32 44 1 48 88 2 96 kHz 16 24 bit DSD dff dsf 2 8224 5 6448 MHz 1 If you download and install the dedicated app you can play back files in wide ranging formats gt 19 For details refer to the operating instructions of the app 2 Whether or not each music file can be played back over your network is determined by the network server even if the format of the file is listed ab
97. th video generation iPod nano 1st generation Unexpected behavior may occur e Operation results may vary depending on the iPhone iPad iPod models or the iOS version Connecting an iPhone iPad iPod When connecting an iPhone iPad iPod use the dedicated USB cable not supplied e g HOFF MOVI iPhone etc Es This unit front USB cable _ not supplied 16 Listening to music stored on an iPhone iPad iPod 1 Connect iPhone iPad iPod to the unit 2 Press USB 3 Start play Operations on the remote control Stop Press W Press b HH Pause e Press again to restart play Skip Press lt or gt P to skip track During play or pause press and hold Si 4 or gt gt LEI lt may be necessary to select the album artist etc on the iPhone iPad iPod e Depending on the iPhone iPad iPod models operations on the remote control may not be possible Charging an iPhone iPad iPod During unit on charging starts when an iPhone iPad iPod is connected to this unit e Charging is not possible when this unit is turned off e Make sure the unit is turned on when you start charging When charging an iPhone iPad iPod whose battery is depleted do not turn this unit to standby mode until the iPhone iPad iPod becomes operational e Check the iPhone iPad iPod to see if the battery is fully charged Once fully charged remove the iPhone iPad iPo
98. tracks in a folder are repeated On randomly e RND is displayed Off Turns off random repeat mode E Repeat playback Press 5 Each time you press the button Only plays the selected track nack e 4 is displayed All All tracks in a folder are repeated e gt is displayed Off Turns off repeat mode L e You cannot use random repeat playback in combination with other playback modes e You can use repeat playback in combination with program playback 18 Program playback This function allows you to program up to 24 tracks Preparation eltis not possible to program tracks by moving folders Move all the tracks you want to program to a single folder in advance 1 Press PGM in the stop mode e Program Mode screen will be displayed 2 Press OK to display the programming screen 3 Press 4 V to select the desired track 4 Press OK e Do steps 3 through 4 again to program other tracks 5 Press H to start playback e To return to the Program Mode screen press W Operations on the remote control Press W Los Programed content is maintained Check the Press lt 4 gt in the stop mode programed e To return to the Program Mode screen order press RETURN Add tracks Do steps 3 through 4 in the stop mode Press CLEAR in the stop mode Clear the last i e It is not possible to select an
99. uivre les tapes 3 4 dans le mode pistes arr t Appuyer sur CLEAR dans le mode Supprimer la arr t derni re piste e n est pas possible de s lectionner et de supprimer la piste programm e d sir e Appuyer sur PGM dans le mode arr t e Effacer prog s affiche Annuler le mode Appuyer sur 4 W pour s lectionner dramm Oui puis appuyer sur OK progra e La m moire du programme sera effac e IT e Le contenu programm est conserv tant que la source entrante est USB e La m moire du programme sera effac e Lorsque le dispositif USB est d branch Lorsque l appareil est mis en mode veille ou hors marche e Vous pouvez utiliser la lecture programm e en combinaison avec la lecture en reprise Avec un PC etc Vous pouvez brancher un PC etc la prise d entr e audio num rique PC l aide d un c ble USB puis lire de la musique pr sente sur le PC etc depuis cet appareil Pour en savoir plus sur le format pris en charge consulter Format du fichier gt 28 Branchement un PC Avant de se brancher un PC suivre les tapes ci dessous Consulter ci dessous les versions de SE de PC recommand es Windows Vista Windows 7 Windows 8 Windows 8 1 OS X 10 7 10 8 10 9 10 10 T l charger et installer le pilote d di sur le PC Seulement pour le SE Windows T l charger et installer le pilote d di
100. un SE R1 d une fa on autre que celle d crite ci dessus E Polarit des prises audio quilibr es Ins rez les broches de c bles de fa on ce que leurs polarit s correspondent aux polarit s des trous E Pour d brancher les c bles sym triques Tirez les c bles tout en appuyant PUSH au dessus des prises 37 9 Fran ais Canada Connexion des dispositifs d entr e audio analogique Vous pouvez envoyer des signaux audio analogiques partir de cet appareil et lire de la musique ex Pr amplificateur avec prises d entr e sym triques Pr amplificateur avec prises d entr e asym triques ANALOG IN BALANCED fake Cet appareil arriere C ble XLR non fourni Nous conseillons d utiliser des c bles d une longueur de 3 m 9 9 pi ou moins Connexion des dispositifs de sortie audio analogique Vous pouvez envoyer des signaux audio analogiques cet appareil et lire de la musique ex Lecteur etc Lecteur etc AUDIO OUT R L AUDIO OUT R L C ble audio non fourni C ble audio non fourni Cet appareil oe arri re 10 38 Connexion des dispositifs d entr e audio num rique Vous pouvez envoyer des signaux audio num riques partir de cet appareil et lire de la musique ex Cet appareil arri re OP
101. uttons SLEEP Set the sleep timer gt 21 Getting started e Turn off all equipment before connection and read the appropriate operating instructions e Do not connect the AC power supply cord until all other connections are complete e Insert the plugs of the cables to be connected all the way in e Do not bend cables at sharp angles System control connection to an SE R1 e You can output digital audio signals from this unit and play back music e You can automatically link this unit with the SE R1 and operate them easily with the remote control gt 23 This unit rear TO SE R1 Technics Digital Link OUT Cable for system control not supplied Cable for system control not supplied LJA e Use category 7 or above straight LAN cables STP when connecting to peripheral devices e We recommend using cables with a length of 3 m 9 9 ft or less The system terminal and the LAN port are identical in shape Be careful not to mistakenly connect either of the cables for system control connected to the system terminal of the SE R1 to the LAN port e Do not connect an SE R1 in any other way than described above E Polarity of the balanced audio terminals Insert the cable pins so that their polarities match the polarities of the holes E To disconnect the balanced cables Pull out the cables while pressing PUSH at the top of the terminals
102. uvent tre modifi s sans pr avis e Ne pas utiliser le cordon d alimentation avec aucun autre appareil E Fonctionnement de la t l commande Placer les piles de mani re respecter la polarit et Pointer en direction du capteur de signal de la t l commande de cet appareil gt 7 e Conserver les piles hors de port e des enfants uu pour viter qu ils les avalent RO3 LRO3 AAA Utiliser des piles alcalines ou au mangan se Entretien de l appareil D brancher le cordon d alimentation avant de proc der l entretien de l appareil Nettoyer cet appareil avec un chiffon doux e Si l appareil est particuli rement sale utiliser un chiffon humide bien essor pour essuyer la salet puis essuyer l appareil avec un chiffon doux e Ne pas utiliser de solvants tels que la benzine du diluant de l alcool des d tergents de cuisine etc Cela pourrait modifier l apparence du bo tier externe ou d coller son rev tement 84 Guide de reference Cet appareil E Avant FH LI O 009 Touche en marche hors marche de l appareil OFF mm I Utilisez cette touche pour mettre l appareil en marche et hors marche moFF hors marche L appareil est hors marche 1 en marche L appareil est en marche e L appareil utilise toujours une petite quantit d nergie en mode hors marche Le mode hors marche utilise moins d nergie gt 26 Port pour iPhone iPad iPod et les

Download Pdf Manuals

image

Related Search

Related Contents

ALLPOOL_men_v3.3    BM-700 IN EAR user guide 摺疊版.cdr  Descargar  Turbo Flo II  MANUAL DEL USUARIO DESBROZADORA DE MOCHILA KD250  BW 1800 enrubanneuse de balles rondes    SCB7080NB  FSM-5000-OPC - Bosch Security Systems  

Copyright © All rights reserved.
Failed to retrieve file